Execute Data by Enter Query from keyboard

Dear all seniors
I want to execute data in my Froms with enter key query by pressing from key board
when i press enter key it execute query

El-Salamu Alikum We Rahmatu Allah We barakatu... ya Ghulam Yassen
i think it's a good approach to mention ur forms version always cause the solution almost depends on that...
Pls check...
Oracle Terminal for Forms 10g
Hope this helps...
Regards,
Amatu Allah

Similar Messages

'No data found' on query from PL/SQL

I have a process which runs 'Before Header' and it does a query which could return 0 results. If it returns 0 results, it's giving me this error:
ORA-01403: no data found
How can I handle this situation?
Also, the query is a SELECT ... INTO temp ..., what will the value of temp be if the query returns 0 results and is handled to avoid the fatal error?
Thank you

Something like -
exception
when no_data_found then
...do whatever you want here...
end;

Power query from ODBC :"DataSource.Error: Arithmetic operation resulted in an overflow"

Good day
Everytime I want to pull data into a query from our servers it gives the error "DataSource.Error: Arithmetic operation resulted in an overflow". What is the reason for this error, and how do I get past this bump.
Thanks in advance
Arnoux

Hey Tristan. Thanks I did that yes.
For some reason my direct MySQL connection does not want to work.
I get the following error
DataSource.Error: MySQL: Unable to find a database provider with invariant name 'MySql.Data.MySqlClient'.
This error may have been the result of provider-specific client software being required but missing on this computer. To download client software for this provider, visit the following site and choose at minimum 'MySQL Connector/Net':

Pai module enter key from key board

hi
can any one tell me how can i display material description after entering material no in screen .
by just clicking enter key from keyboard .
Regards
Rakesh singh

Use a case statement.
CASE ok_code.
When Others.
*********Write code to read material description from table or Internal table ***********
Pass the description to the field on the screen. To do this define a work area with same name of screen element
End case.
Now the value will automatically be populated.

How to run a MS Access Query from Servlet

Is there a way to execute an MS Access query from a servlet. I have a query that is doing an INSERT into the database. I tried to code the servlet to directly do the query itself, but it keeps locking the database and hanging. I would appreciate any help.
Thanks,
Justin
[email protected]

r u refering to the query saved inthe MSACCESS, if so then it may not be possible, bcoz it is not a pure RDBMS. otherwise the u can do it as inthe above mention thread.

Problem while capturing keys from keyboard .

hello abapers,
i am trying to catch my enter key from keyboard coz i want run some code when user will press enter.
i think sy-ucomm will capture the key pressed, if i am wrong then plz correct me.
(1) with this assumption i tried running bdc for my screen and tried to get the bdc_okcode value which is /00
i passed this value to sy-ucomm in my abap prog but it didnt worked
(2) i tried writting /h in command window it oppend the debugging window but the value for sy-ucomm was blank
if any one of you is able to correct me it would be of great help to me plz its .....
Thank you.
Edited by: Dakshaini A Subramaniam on May 15, 2011 8:36 AM
Edited by: Rob Burbank on May 15, 2011 4:21 PM

Hi ,
Double click your ,
SET PF-STATUS 'STATUS'.
code. At Standard Toolbar part of the pf-status , set OK CODE for first item (green) to 'ENTER'.
When user hits enter , sy-ucomm will be ENTER.
This is for screen processing .

How can I filter a table from Data Control without enter query

I have a table from a web service data control based on WSDL.
I want to filter the table without input query at filter text box. Without filter text box, each would filter the table with a hardcoded query internally.
For example, when user click A menu button then it filters the table where type = '1' and B menu button filters the table by type='2' and C menu button filters the table by type=' ' .
How can I filter the table without enter query?
Could anyone point me to a solution please.
Thanks.
jdev 11.1.5
Edited by: 893364 on Oct 26, 2011 12:15 PM
Edited by: 893364 on Oct 26, 2011 12:21 PM

Hi,
when you created the table, did you try selecting the "filter" option. Select the table and go to the Property Inspctor. In the tool bar of the Property Inspector there is an icon to change the configuration. Its adding filter filter fields for the user to search in.
Option 2: The data of the Web Service actually is held in the iterators. If you wanted to filter the WebService query, I would not use the WS DC but a JAX-WS proxy in a POJO to fetch the WS Data. Then have the Data Control created from the POJO. You could have a method exposed on the POJO that allows you to filter the internally held data
Frank

Error "Conversion failed when converting date and/or time from character string" to execute one query in sql 2008 r2, run ok in 2005.

I have a table-valued function that run in sql 2005 and when try to execute in sql 2008 r2, return the next "Conversion failed when converting date and/or time from character string".
USE [Runtime]
GO
/****** Object: UserDefinedFunction [dbo].[f_Pinto_Graf_P_Opt] Script Date: 06/11/2013 08:47:47 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE FUNCTION [dbo].[f_Pinto_Graf_P_Opt] (@fechaInicio datetime, @fechaFin datetime)
-- Declaramos la tabla "@Produc_Opt" que será devuelta por la funcion
RETURNS @Produc_Opt table ( Hora datetime,NSACOS int, NSACOS_opt int)
AS
BEGIN
-- Crea el Cursor
DECLARE cursorHora CURSOR
READ_ONLY
FOR SELECT DateTime, Value FROM f_PP_Graficas ('Pinto_CON_SACOS',@fechaInicio, @fechaFin,'Pinto_PRODUCTO')
-- Declaracion de variables locales
DECLARE @produc_opt_hora int
DECLARE @produc_opt_parc int
DECLARE @nsacos int
DECLARE @time_parc datetime
-- Inicializamos VARIABLES
SET @produc_opt_hora = (SELECT * FROM f_Valor (@fechaFin,'Pinto_PRODUC_OPT'))
-- Abre y se crea el conjunto del cursor
OPEN cursorHora
-- Comenzamos los calculos
FETCH NEXT FROM cursorHora INTO @time_parc,@nsacos
/************ BUCLE WHILE QUE SE VA A MOVER A TRAVES DEL CURSOR ************/
WHILE (@@fetch_status <> -1)
BEGIN
IF (@@fetch_status = -2)
BEGIN
-- Terminamos la ejecucion
BREAK
END
-- REALIZAMOS CÁLCULOS
SET @produc_opt_parc = (SELECT dbo.f_P_Opt_Parc (@fechaInicio,@time_parc,@produc_opt_hora))
-- INSERTAMOS VALORES EN LA TABLA
INSERT @Produc_Opt VALUES (@time_parc,@nsacos, @produc_opt_parc)
-- Avanzamos el cursor
FETCH NEXT FROM cursorHora INTO @time_parc,@nsacos
END
/************ FIN DEL BUCLE QUE SE MUEVE A TRAVES DEL CURSOR ***************/
-- Cerramos el cursor
CLOSE cursorHora
-- Liberamos los cursores
DEALLOCATE cursorHora
RETURN
END

You can search the forums for that error message and find previous discussions - they all boil down to the same problem. Somewhere in your query that calls this function, the code invoked implicitly converts from string to date/datetime. In general,
this works in any version of sql server if the runtime settings are correct for the format of the string data. The fact that it works in one server and not in another server suggests that the query executes with different settings - and I'll assume for
the moment that the format of the data involved in this conversion is consistent within the database/resultset and consistent between the 2 servers.
I suggest you read Tibor's guide to the datetime datatype (via the link to his site below) first - then go find the actual code that performs this conversion. It may not be in the function you posted, since that function also executes other functions.
You also did not post the query that calls this function, so this function may not, in fact, be the source of the problem at all.
Tibor's site

Suppress the enter-query mode when no-data-found after execute a query.

HI,
Greetings of the day, Can any one suggest me that how to Suppress the enter-query mode when no-data-found after execute a query on the form by a button.
whenever i execute query on form and result is no data found then form :system.mode is still in enter-query mode.
i want that if result is no data found then form comes back it initial state.
i will thank full of him who will help me..
Thanks in Advance..

Put this in your Key-ExeQry trigger:Execute_Query;
If Get_block_property(:System.current_block,query_hits)=0 then
Exit_form; --this cancels the Enter-Query mode; Does not exit the form.
End if;You may want to trap and prevent the "FRM-40353: Query cancelled" message, and change the "FRM-40301: Query caused no records to be retrieved. Re-Enter" message. To do that, you need an On-Message form-level trigger:Declare
Msg_Code Number        := MESSAGE_CODE;
MSG      Varchar2(150) := SUBSTR('   '||MESSAGE_TYPE||'-'
                         ||TO_CHAR(Msg_Code)||': '||MESSAGE_TEXT,1,150);
BEGIN
If Msg_Code=40301 then
     -- 40301: Query caused no records to be retrieved. Re-Enter
    Message(' NO RECORDS FOUND',No_acknowledge);
Elsif Msg_Code=40353 then -- Query cancelled.
    null;
Else
    MESSAGE(MSG,NO_ACKNOWLEDGE);
End if;
End;

How to clear data on ENTER from keyboard?

I have an editable ALV .
When I input the material number and press ENTER button on keyboard, it populates some more fields in the row.
using
CALL METHOD lo_grid->register_edit_event
      EXPORTING
        i_event_id = cl_gui_alv_grid=>mc_evt_enter.
I am able to trigger this in the event data_changed.
Now:;
I clear the material number and press ENTER again - it does not wipe out the fields that are filled in as above.
[This however works fine in debug mode..]
How to resolve this:
Here is my code:
In top-of-page event:
CALL METHOD lo_grid->register_edit_event
      EXPORTING
        i_event_id = cl_gui_alv_grid=>mc_evt_enter.
Then in
*       METHOD data_changed                                           *
METHOD data_changed.
    PERFORM d0100_event_data_changed USING er_data_changed
                                           e_onf4
                                           e_onf4_before
                                           e_onf4_after.
ENDMETHOD.                    "data_changed
FORM d0100_event_data_changed USING er_data_changed TYPE REF
                                        TO cl_alv_changed_data_protocol
                                          e_onf4        TYPE char1
                                          e_onf4_before TYPE char1
                                          e_onf4_after TYPE char1.
                                                            "#EC *
LOOP AT er_data_changed->mt_good_cells INTO ls_good_cells.
    IF NOT ls_good_cells IS INITIAL.
CASE ls_good_cells-fieldname.
when 'MATNR'.
            ls_delta_cells-row_id = ls_good_cells-row_id.
            ls_delta_cells-fieldname = 'WERKS'.
            ls_delta_cells-value = '1111'. "I am passign space when MATNR is initial
            APPEND ls_delta_cells TO lt_delta_cells.
endif.
          IF NOT lt_delta_cells[] IS INITIAL.
            l_frontend_only = 'X'.
            CALL METHOD lo_grid->set_delta_cells
              EXPORTING
                it_delta_cells = lt_delta_cells
                i_modified      = 'X'
                i_frontend_only = l_frontend_only.
          ENDIF.
endcase.
LOOP AT er_data_changed->mt_good_cells INTO ls_good_cells.
Edited by: Julius Bussche on Jan 26, 2009 9:34 AM
Code tags added.

I found a work around for this - when MATNR is initial, I did a clear in the alv output table for that row and then did a refresh_table_display.
it worked.
I am leaving this open for sometime to see if any better solutions can be proposed..

Date format mask in Enter-Query mode

Hi,
I'm developing a Form which is able to query the masterblock from a detail-item.
The queryable detail-item is a date field and has a datatype: DATETIME. When a new record is entered the values in the date field are stored in the database like "18-10-2002 15:04:02"
When the form is in enter_query mode the user must be able to enter 18-10-2002 (DD-MM-YYYY format mask, so without time mask). When execute the query with this date format the query is not able to find data.
I used a Key-Execute-Query on the detailblock like this:
SELECT 1.COLUMN
, 2.COLUMN
INTO :1.COLUMN
, :2.COLUMN
FROM TABLE.1
, TABLE.2
WHERE 1.COLUMN = 2.COLUMN
AND TO_CHAR(1.COLUMN,'dd-mm-yyyy') = to_date(:avg.datum,'dd-mm-yyyy');
Can anyone please help me?
Regards,
Ronny.

Hi Ronny,
I'm not sure to have got exactly your issue (especially why you have to use that select in master-detail query), but I suggest you to substitute
...AND TO_CHAR(1.COLUMN,'dd-mm-yyyy') = to_date(:avg.datum,'dd-mm-yyyy');
with
...TRUNC(1.COLUMN) = TO_DATE(:avg.datum,'dd-mm-yyyy');
To be fair, I would use it in the where clause, even if you set it dinamically.
Let us know,
Marco

Time out error while executing BW query from SRST

Hello Experts,
While running a query from SRST t-code im getting time out dump.
Is there any possibility to run the query in background to avoid dumps, apart from taking the report and executing from SE 38
Regards,
Arjun Reddy.

Hi,
Your target may have huge and report may be trying to extract whole data.
please try to your report with some selections/filters and check it.
it may work.
Thanks

ORA-27092 Error while executing any query from client

Hello
I am getting following error while executing any query from client remotly.
IAMDBA@TEST_OAT.ABCD > select userid from dual;
select userid from dual
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-01116: error in opening database file 1
ORA-01110: data file 1: '/u01/prod/system/system01.dbf'
ORA-27092: size of file exceeds file size limit of the process
Additional information: 131071
Additional information: 286209
But while local connection,its working.

hi,
ulimit command- Limit user resources
su - oracle
ulimit -n (this command will show you the current value for ulimit the default value is 1024)
to increase its value:---
ulimit -n <some value> ( this command will change value for current session only)
example
ulimit -n 101062
once done check the value as:--
ulimit -n( for verification)
search in google for more explanation or revert back to me for any suggestions.... :)
Edited by: varun4dba on Jan 31, 2011 4:09 PM

How can I execute a query from a BSP application?

How can I execute a query from a BSP application?
I´m trying to execute a Query from intranet. I´ve been looking for examples, but the templates I´ve found doesn´t help me.
does anybody has an example?
Thanks.

Hi
Have you designed the BSP application ?
design it first with one page
page will have layout and Event handlers
Design the layout with the fields
in the event handler there are events
in the event On Initiailization or ON inputprocessing write the select query similar to what we write in routine ABAp and fetch the data into ITAB and that has to be passed to the Layout
see the doc
BSP
To learn how to create Web applications with Business Server Pages, you can work through the simple tutorials that build on each other. You should be able to run through all of the steps described here in your own system.
If you want to develop Web applications with BSPs, your system must meet the following requirements: Prerequisites for Creating Web Applications.
The following tutorials are available:
· First Tutorial: First Steps with Business Server Pages
· Second tutorial: A Small BSP Application and A Small BSP Application with HTMLB
· Third tutorial: Our First Online Bookshop
· Fourth tutorial: Further Developing the Bookshop
· A small Tutorial is also available for your first steps with the Model View Controller design pattern.
· For a more complex MVC tutorial based on the third tutorial, see: Our Little Online Bookshop Using MVC and HTMLB
When creating BSP applications, note the browser dependencies described in Note 598860.
steps:
1) start the transaction RZ10.
2) now u u have to select Profile name, so select the INSTANCE Profile from the list of options given with the Profile parameter list.U may find multiple instance profile in the list, so select the profile in which ur server name is given.
3) u will also find three options in the same window.
Administrator data, Basic Maintenance, and Extended Maintenance. So select the last one from that.
4) Now click on change button.
5) here u will find parameter icm/host_name_full, so now set it as FQDN.
6) Now copy ur settings with new version number.
7) Activate that version.
8) And now please restart ur WAS.
So this will set ur FQDN, and also don't forget to login using Admin User.
Now u also check for following service are active in your ICF setting or not,( just start transaction code SICF)
/default_host/sap/bc/bsp/sap
/default_host/sap/bc/bsp/sap/system
/default_host/sap/bc/bsp/sap/public/bc
/def ault_host/sap/public/bc
/default_host/sap/public/bc/ur
/default_host/sap/public/bsp/sap/public
/default_host/sap/public/bsp/sap/public/bc
/defaul t_host/sap/public/bsp/sap/system
/default_host/sap/public/bsp/sap/htmlb
if not then activate all.
check this link
Read this weblog...
/people/brian.mckellar/blog/2003/09/25/bsp-in-depth-fully-qualified-domain-names
http://www.thespot4sap.com/articles/SAP_WAS_Creating_BSP_Apps.asp
it consists of screen shots also
Check it.
http://help.sap.com/saphelp_nw04/helpdata/en/c8/101c3a1cf1c54be10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e9/bb153aab4a0c0ee10000000a114084/frameset.htm
Regards
Anji

Trigg the 'Query' button when pressing 'Enter' on the keyboard

I have a form with 2 buttons, 'query' and 'reset'.
I would like that the 'query' button is triggerd (pressed) when the user presses 'Enter' on the keyboard. In regular html I think this is accomplished if the button is a 'submit' rather than a 'button' type, but I haven`t found a way to edit the
type of button in Portal.
Users belive it`s very annoying to have to move the mouse over the 'query' button to execute the query, and would rather like to just press 'Enter'.
I`ve tried to use a javascript (onKeyPress), but if you make a javascript in Portal, you`re not allowed to add this to your button, only as an 'form-' or 'field validation' in a textbox.
Is there anyone who knows a way to get this functionality?
Regards,
Orjan

One of the AVG add-ons for Firefox has been reported to cause that to happen. Disable that add-on until AVG fixes it.

Execute Data by Enter Query from keyboard

Similar Messages

Maybe you are looking for