"Execute in the browser" fails

Operation: 1. start Web Application Designer
           2. connection to CB3 (ICCR3CE5.SAP.COM)
           3. click "execute in the browser"
Problem: The page pointed by the URL in the popped browser can not be displayed
Solution:
create a entry in table "HTTPURLLOC" with data below:
MANDT:    800
SORT KEY: 010
PROTOCOL: HTTP
HOST:     ICCR3CE5.SAP.COM
PORT:     82

That did it. Thank you. I never would have figured that one out! Makes it much better visually.

Similar Messages

General failure -the browser fails to perform especially after computer has been left switched on for a while.

After the computer has been switched on for a while and I try to access the internet - it fails to do so and the message I get is : -General Failure - followed up by the specific address/site which it cannot open. This is happening with increasing frequency especially when I try to open email links etc. I then switch off the computer and after a few minutes or even half and hour, i reboot and it then becomes possible to open whatever was not possible before. This is quite irritating however.
Vlad
Vlad

Thank you for the suggestion and having tried it with other browsers, I can now confirm that it only happens with FF. I like FF a lot and hate to bother with other browsers but it I have to, I will most reluctantly abandon it.
By the way, having downloaded 36 of your recommended ADD-ONS, I had to get rid of them(uninstall). They not only cluttered up the start-up page but noticeably slowed down the computer. ( I left about half a dozen). Moreover, what is the point of them unless there is an icon or a button that I can click on for instant access to an ADD_ON. Instead I had to search hard to access the ones that I wanted and even then was unable to engage them. For example, I download clocks and a currency converter but was unable to use them.

I am building a client application under Tuxedo 12.1.3 AIX. The code works under Tuxedo 8. The compile completes and generates an executable, however the application fails to load indicating the auxiliary header is invalid.

The output is XCOFF64, along with other built libraries stored in big format archive (not shared object). Is there something wrong with the compile options or am I missing an option that Tuxedo needs to pass onto xlc for linking?
Archive options are ar -v -r
Build options: -r -q64 (includes, defines)
All else standard buildclient option listings.
Some more than likely to be asked for information:
exec(): 0509-036 Cannot load program aftct.exe because of the following errors:
0509-102   The size of the auxiliary header is invalid.
0509-194 Examine file headers with the 'dump -ohv' command.
----- dump -ohv output
***Object Module Header***
# Sections      Symbol Ptr # Symbols       Opt Hdr Len     Flags
3 0x000987a2           4060 0     0x0000
Flags=( DEP_SYSTEM )
Timestamp = "Mar 25 18:57:22 2015"
Magic = 0x1f7 (64-bit XCOFF)
***Section Header Information***
Section Header for .text
PHYaddr VTRaddr     SCTsiz RAWptr      RELptr
0x100000138 0x100000138 0x00068ec4 0x00000138 0x00072598
LN#ptr #RELent     #LINent     Flags
0x00000000 0x00002423 0x00000000 0x00000020
Section Header for .data
PHYaddr VTRaddr     SCTsiz RAWptr      RELptr
0x110000ffc 0x110000ffc 0x0000959c 0x00068ffc 0x00091f82
LN#ptr #RELent     #LINent     Flags
0x00000000 0x00000770 0x00000000 0x00000040
Section Header for .bss
PHYaddr VTRaddr     SCTsiz RAWptr      RELptr
0x11000a598 0x11000a598 0x000266c0 0x00000000 0x00000000
LN#ptr #RELent     #LINent     Flags
0x00000000 0x00000000 0x00000000 0x00000080
---- some truss output
getgidx(2) = 201
getgidx(1) = 201
__loadx(0x01480080, 0x2FF21660, 0x00000A50, 0x2FF221D0, 0x2FF22F37) = 0xD054C128
access("/usr/lib/nls/msg/en_US/execerr.cat", 0) = 0
_getpid() = 3080398
kopen("/usr/lib/nls/msg/en_US/execerr.cat", O_RDONLY) = 3
kioctl(3, 22528, 0x00000000, 0x00000000)        Err#25 ENOTTY
kfcntl(3, F_SETFD, 0x00000001) = 0
kioctl(3, 22528, 0x00000000, 0x00000000)        Err#25 ENOTTY
kread(3, "\0\001 ù\001\001 I S O 8".., 4096)    = 4096
lseek(3, 0, 1) = 4096
lseek(3, 0, 1) = 4096
lseek(3, 0, 1) = 4096
_getpid() = 3080398
lseek(3, 0, 1) = 4096
exec(): 0509-036 Cannot load program kwrite(2, " e x e c ( ) :   0 5 0 9".., 37)        = 37

Hi,
Can you post the commands you were using to build your client? Normally that library should be included by default if using buildclient.
Regards,
Todd Little
Oracle Tuxedo Chief Architect
PS Glad you found a solution!

JSP not executing instead the browser is showing the code

I have deployed the JSP to Sun One Webserver 6.1.
In magnus.conf file the following line is present:
Init fn="load-modules" shlib="/opt/SUNWwbsvr/bin/https/lib/libj2eeplugin.so" shlib_flags="(global|now)"
Please let me know if I am missing any configuration setting.

Can you please check if the default-web.xml of the instance (in the config directory) has the following servlet mapping:
<servlet-mapping>
<servlet-name>jsp</servlet-name>
<url-pattern>*.jsp</url-pattern>
</servlet-mapping>
Thanks

How to prevent the browser from executing the old version of js file...

Dear sirs,
I have a JSP page that includes a javascript file as given below,
<script type="text/javascript" src="../scripts/validation.js"></script>
Some times modification is needed in this included script file. After the modification, when I load the JSP page in the browser,
the old copy of the script file, which was not modified is getting executed. by the browser.
I would like to know whether any options are availabe in javascript to prevent the browser from executing the old copy that has already downloaded to the temperary interner folder(from caching)and use the modified version available with the new response...
Thank you,
Sudheesh K S

Dear sir,
Thakyou very much for your comment.
I tried this, By doing thisThe .html page of the response will be deleted. But the javascript file will not be removed. It will be remail there.
This lead me to the idea to think about javascript. I heard that some commands are there in javascript like cache ="NO" but not sure. I searched in the net but no favourable result found...
Thank you,
Sudheesh....

[SOLVED] Firefox won't start - "Failed to execute default Web Browser"

I've just updgraded from Firefox 3 to version 4 (by running "pacman -Syu") on my 64-bit Arch installation. I started XFCE and Firefox 4 worked fine for a few minutes before crashing and closing automatically.
A short while later (long enough to forget exactly what I was doing when it crashed!) I tried to run it again, but got the error message Failed to execute default Web Browser. / Input/output error.
I've tried rebooting the PC and re-installing firefox & firefox-i18n, but still get the same error. If I run "firefox" from a terminal window, I get the following response:
OpenOffice path before fixup is '/usr/lib/openoffice.org3'
OpenOffice path is '/usr/lib/openoffice.org3'
*** NSPlugin Wrapper *** WARNING:(/build/src/nspluginwrapper-1.3.0/src/npw-wrapper.c:3160):invoke_NP_Initialize: assertion failed: (rpc_method_invoke_possible(g_rpc_connection))
NOTE: child process received `Goodbye', closing down
OpenOffice path before fixup is '/usr/lib/openoffice.org3'
OpenOffice path is '/usr/lib/openoffice.org3'
firefox: symbol lookup error: /usr/lib/mozilla/plugins/libvlcplugin.so: undefined symbol: NPP_Initialize
I'm not sure why there are so many references to "OpenOffice"...
Can anyone offer any suggestions as to how to get Firefox working again? (Thanks in advance!)
Last edited by esuhl (2011-03-25 00:40:19)

^-Ubermensch-^ wrote:https://bugs.launchpad.net/ubuntu/+sour … bug/722690
Thanks for that. After I posted my last message, Firefox crashed again on a website containing embedded video. I disabled the add-on, but when VLC was updated, I guess it installed and enabled the add-on again. Firefox worked fine initially, but I've just tried to open it again and the same "input/output error" message appeared. I rebooted, but the problem persisted.
Uninstalling the vlc-plugin package seems to have resolved that, though.

Oracle Reports gives : "Failed to locate the Browser" Error. Please help.

Hello All,
I am new to Oracle Reports Developer. I followed the "Oracle Reports Tutorials" (Document ID : B14364-01) to build my first report.
I tried to run the report in web layout mode : I got the following things.
1) A new blank firefox window.
2) After a few seconds : A message window in Report Builder with : "Failed to Locate the Browser" Message
My Machine details :
Windows XP sp3.
Oracle Developer Suite 10g.
Firefox version : 3.5.
Registry Entries : HKEY_CURRENT_USER|Software|Oracle|Toolkit|TKBrowser. No BrowserName, BrowserPath keys found. So I added these keys manually under the paths :
HKEY_CURRENT_USER|Software|Oracle|Toolkit|TKBrowser|BrowserName (value = firefox)
HKEY_CURRENT_USER|Software|Oracle|Toolkit|TKBrowser|BrowserPath (value=C:\Program Files\Mozilla Firefox\firefox.exe)
Ran the report again. This time also I encountered the same scenarios which I mentioned previously. Also tried with registry setting
HKEY_CURRENT_USER|Software|Oracle|Toolkit|TKBrowser with value "BrowserName=firefox;BrowserPath=C:\Program Files\Mozilla Firefox\firefox.exe".
I also ran with the all the settings once without restarting the computer after making the changes. And also ran each time by restarting the computer whenever I changed the value. I could not get a break thourgh.
Please help me in resolving this issue. Your help is greatly appreciated.
Thanks in advance,
Suresh.

Thanks for replying. I tried the same thing with Netscape 9 now. It is still displaying a blank web page and after a few seconds the same message in Reports Developer : " Failed to locate the Browser".
Is there any specific setting that I need to customize in order to run the reports? My Forms are being executed without any issues. Where as I have problem with Reports Developer.
Thanks in advance,
Suresh.

Failed to execute with the error Error occurred when starting the parser: t

Dear All
I am getting this error
""A database error occurred. The database error text is: The MDX query SELECT { [DASKA1EDEL2DMLXTQ62S595QV].[DB7BP4A8AMQTUD3DPEEPS4J87] } ON COLUMNS , NON EMPTY CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( [0CALMONTH].[LEVEL01].MEMBERS, [DASKFZ1TRFOLNTG78G0HH2B87].MEMBERS ), [0MATERIAL].[LEVEL01].MEMBERS ), [0PLANT].[LEVEL01].MEMBERS ), [0COMP_CODE].[LEVEL01].MEMBERS ), [0ACTDELDATE].[LEVEL01].MEMBERS ) DIMENSION PROPERTIES MEMBER_NAME, MEMBER_CAPTION ON ROWS FROM [0IC_C03/ZMATSTOCK] failed to execute with the error Error occurred when starting the parser: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'. (WIS 10901)""
I already went to similar kind of error solution in forum,but this error is coming for one web I query,all other reports are working fine.
I already implemented note 1032461

Hi,
Under normal circumstances it should be enough to restart the connection service.
As far as we know there is no formal solution to this problem from SAP yet but restarting the connection service is much less of an interuption compared to restarting the the SIA.
Re-starting the connection service should resolve this issue. since, Connection service is only related to DeskI and Rich Client re-statrng wonu2019t impact other business objects components including java report panel.
All the Best,
Madhu....

Do browser send a error report to the website if browser fail in set up communication channel first time with that site

Suppose i want to open some site using mozilla but first time browser fail to set up communication channel. When I attempt second time it successfully set up a connection then my question is that on the second time will browser send error report of first time to that site

What was the specific problem with the first request? For example:
* The server reset the connection
* Page didn't load (blank)
* Security certificate error
* et cetera
In some of these cases, the destination server might not know you sent a first request. And in other cases, that will be in the log. But I do not think Firefox sends any notification of problems with previous connections, the site would have to make an educated guess about the problem based on getting two sequential requests from the same IP address.

The request to execute code in the sandbox failed

I have developed a webpart for a client which is hosted on
O365.
While saving the webpart properties I am Getting the error"Web Part Error: The request to execute code in the sandbox failed."
The same web part works on a different O365 site perfectly fine.

Try below article
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/70b13a7f-c9f8-4bf9-8229-670472959e60/web-part-error-sandboxed-code-execution-request-failed?forum=sharepointdevelopmentprevious

Running an SQL Server Agent Job to execute a package but the job FAILS on Connections

I have created a package which basically imports data from one database to another, The database where it collects the data from the job is failing on connecting reporting the following message:
Source: ****** Connection manager "Source - *****"     Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E4D. An OLE DB record is available. Source: "Microsoft
OLE DB Provider for SQL Server" Hresult: 0x80040E4D Description: "Login failed for user '*ConnectionONE*'.". End Error Error: 2015-02-18 11:36:04.94     Code: 0xC020801C
Source: Data Flow Task Get Revenue Data [1]     Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Source - *****" failed with error
code 0xC0202009.
The package runs fine if executed within the package but fails from the SQL Agent Job.
NB * is to hide confidential data. *ConnectionONE* is the database which the package is attempting to get data from.
Completely puzzled on what to do as i have tried reading other forumns but they dont seem to be helping.
Any Help would be great thankyou!

That is because package is set to "EncryptSensitiveWithUserKey". Please change that to "EncryptSensitiveWithPassword" and the provide password to protect sensitive data.
More information
here.
Regards,
Vishal Patel
Blog: http://vspatel.co.uk
Site: http://lehrity.com

Failed to execute with the error Overflow converting from...

I have a query filter for UPC in Webi Report. The report is not working for one UPC (for other UPC's the report is working fine)...it gives error "failed to execute with the error Overflow converting from '6218090010'. (WIS 10901)". The same error is coming when I ran MDX in MDXTEST command in BW. When I take the UPC filter from the query filter the report runs fine and I see this UPC in the report. The data source is Bex and we have recently upgraded to SAP EHP 1 for SAP NetWeaver 7.0.
Regards
Sharma

Hi,
Under normal circumstances it should be enough to restart the connection service.
As far as we know there is no formal solution to this problem from SAP yet but restarting the connection service is much less of an interuption compared to restarting the the SIA.
Re-starting the connection service should resolve this issue. since, Connection service is only related to DeskI and Rich Client re-statrng wonu2019t impact other business objects components including java report panel.
All the Best,
Madhu....

WSIF JCA Execute of operation 'SynchRead' failed due to: The SSH API threw

Hello All,
I am getting the following error for SFTP Synchronize operation
"WSIF JCA Execute of operation 'SynchRead' failed due to: The SSH API threw an exception".
Have any of you experienced this error and how to fix this.
thanks
BPELDeveloper

<detail>Element not completed: 'Payables_Exp_Payload'</detail>It seems problem is in schema validation. Make sure that you are passing a valid xml to adapter. Exactly what are you doing in your process?
To get better response cross-post your question in BPEL forum -
BPEL
Regards,
Anuj

Execute SQL Task Editor: The query failed to parse. Syntax error, permission violation, or other nonspecific error.

Environment: SQL Server 2008 R2
Code:
CREATE TABLE dbo.PkgAudit
PkgAuditID INT IDENTITY(1, 1),
PackageName VARCHAR(100),
LoadTime DATETIME ,
NumberofRecords VARCHAR(50),
Status1 VARCHAR(50),
Status2 VARCHAR(50),
The following code is inserted in the SQL Task Execute Editor
INSERT INTO dbo.PkgAudit(PackageName
,LoadTime
,NumberofRecords
,Status1
,Status2
) VALUES(?,?,?,?,?)
Screen Shot (Parameter Mapping):
Problem: an error Message occurred when I hit Parse Query Button in the Execute SQL Task Editor, "Execute SQL: Task Editor: The query failed to parse. Syntax error, permission violation, or other nonspecific error". How I could Solve this
problem

Different connection providers require different Parameter syntax. E.g. ADO @ParameterName notatoin, not just an offset of 0,1 etc.
Arthur My Blog

Images fail to load into the browser

Hello,
Sometimes images fail to load into the browser (they show up as a red "X"). Does anyone know why? Refreshing often loads them correctly, but then a different image will not load (and show a red "X").
Thanks very much,
Andy

Hi Vikas,
Thank you very much for your help on this. I am now using a faster computer and the problem no longer happens. I did understand your suggestion - I was brainstorming ideas to make changes to APEX to account for slow computers, or computers without enough memory. To somehow guarantee a level of service for APEX applications at the end user's browser. Similar to how Oracle Enterprise manager can help guarantee certain SLAs for J2EE web applications, by monitoring performance from the browser all the way back to the disk. (I'm not sure if it 100% can do this today, but I believe this is the direct it is headed).
Well, I suppose if everyone uses fast computers this is no longer an issue. But, sometimes fast computers are hard to come by.
Thanks again for your help,
Andy

"Execute in the browser" fails

Similar Messages

Maybe you are looking for