Execute Query is not working

hi all,
In my when-new-form-instance form level trigger i have given go_block('blockname')
execute_query
but this execute query is not firing .when i checked using message i was able to reach line b4 and after the execute query but still it has not populated the data from the base table.
the base table also contains records.
when i run this particular fmx in the similliar but differnt database this form runs well and data gets populated automatically.
i am unable to move fwd becouse of this i have spend many hours on this issue. please help me out.
please write for any further clarifications..
thanks and regards,

There is no data on the table that satisfies the query. Copy the data from the database that does return data and try again. Are you looking at the correct table, it maybe a synonym issue as someone previously mentioned.
A trick to see the select statement is this :- Press enter_query, enter :A into one of the query fields, press enter_query. A query box should appear. Type dog=1 and click ok. You will then get an error message (FRM-40505). Choose 'Display error' of the help menu (or Shift+F1). This will display the select statement. Obviously ignore the dog=1 as this is what caused the error but look at the where clause for clues.
It does sound like the form is looking at at different table to you.

Similar Messages

Execute Query flag not working?

When you create an application using business components with the wizard, the generated code contains a flag, executeQueriesNow, that is passed to the SessionInfo.publishSession() method. Setting this flag to false seemingly has no effect - the query is executed immediately regardless of the setting of this flag. PS. I did not add any code to execute the query at a later time.

SessionInfo.publishSession(false) no longer has the effect of delaying the execution of queries. Instead, you need to programmatically determine when each query is executed.
-- Brian

IBM cognos TM1 Executive viewer is not working on direct Access

Hi,
We are implementing DirectAccess in our environment and testing applications in test lab. It has been observed that executive viewer is not working on Direct Access but working fine over VPN mobile checkpoint. When DA client click on open view button it
gives error
" Additional information:
Unable to connect to server XYZ.com using TCP-IP port 7112. Please make sure that IBM cognos TM1 executive viewer server is started and the port is not blocked by any proxy server or firewall"
but from client telnet is working on port 7112. All ports between DA server and application server are open 3389,7112 and 80.
Also select database option is grayed out and user is unable to select the database. When switching to VPN its working fine.
We are using Executive viewer 9.4.
Any help would be appreciated.

It sounds like this program may not be capable of talking over IPv6, which DirectAccess uses. First make sure that when you connect it is trying to talk to a hostname and not an IPv4 address. If your program is calling for "192.168.1.100" - this is never
going to work over DirectAccess. It must call for a name that DirectAccess can resolve to an IPv6 address for communication over DA.
If you confirm it is talking to a name, and then if you confirm that you can do other things to that same name (can you RDP into the server for example?), then that confirms that DirectAccess traffic flow is working to that name/server.
If RDP works but the application still doesn't work, then the application is probably incapable of IPv6. You can either ask IBM if they have a newer version that does talk IPv6, otherwise I have a utility available that can intercept packets from these kinds
of problematic applications and flip the packets into IPv6 on the DA client. Let me know if you need any further information on that: http://www.ivonetworks.com/news/2013/05/ivo-networks-announces-app46-for-directaccess/

Bex Query is not working in portal

Dear Experts,
i have uploaded BI master role into portal, By default Bex Queries are assgined to Master Role. when I clcik on preview for particular Bex Query, it's working fine. but after assigning the master role to end user, that same Bex Query is not working. it's showing Below error..
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 05:22_18/08/10_0002_7116150
Refer to the log file for details about this exception.
please give me suggetions...
Regards,
VENU

Hi Venu ,
Can you please check the logs for details - http(s):<host>:<port>/nwa . This may be a permissions issue . Check if the iview has read permission for everyone group and then test . Also post the error details here .
Regards
Mayank

Temporary Table In SAP Query - Does not Work?

DECLARE @date DATE
DECLARE @delrows INT
DECLARE @delquan INT
DECLARE @a INT
DECLARE @recrows INT
DECLARE @recquan INT
SET @a=0
IF OBJECT_ID('tempdb..##tab) IS NOT NULL DROP TABLE ##tab
CREATE TABLE ##tab
[Date] date,
[Delivery Rows] varchar(40),
[Delivery Total Units] varchar(40),
[Receipts Rows] varchar(40),
[Receipts Total Units] varchar(40),
WHILE @a!=7
     BEGIN
     SET @date=DATEADD(day,-@a, getdate())
     SELECT @delrows=ISNULL(COUNT(DLN1.[LineNum]),0), @delquan=ISNULL(SUM(DLN1.[Quantity]),0)
     FROM ODLN
     INNER JOIN DLN1 ON ODLN.[DocEntry]=DLN1.[DocEntry]
     WHERE ODLN.[CreateDate] = @date
     SELECT @recrows=ISNULL(COUNT(PCH1.[LineNum]),0) , @recquan=ISNULL(SUM(PCH1.[Quantity]),0)
     FROM OPCH
     INNER JOIN PCH1 ON OPCH.[DocEntry]=PCH1.[DocEntry]
     WHERE OPCH.[DocDate]=@date
     SET @a=@a+1
          INSERT INTO ##tab VALUES(@date,@delrows,@delquan,@recrows,@recquan)
END
SELECT * FROM ##tab
{/code}
Can anyone explain why this query does not work in SAP? It works fine on SQL but gives me this message in SAP:
1). [Microsoft][SQL Server Native Client 10.0][SQL Server]Incorrect syntax near ')'.
2). [Microsoft][SQL Server Native Client 10.0][SQL Server]Statement 'Service Contracts' (OCTR) (s) could not be prepared.
Edited by: Chris Candido on Feb 2, 2011 8:38 PM

Chris,
There are several areas in your code which needed changes.
1. On the field name for your temp table you had spaces.
2. The SAP table name ODLN, OPCH, PCH1 had to be fully referenced like
[dbo].[ODLN]
3. You really need not have ## in front of your temp table, it could just be #
The select at the end is actually what causes the most problem as for some reason from within SAP it does not produce the result. I would suggest you put the whole code into a Stored Procedure and call the SP from SAP. Corrected SQL below. If you remove the Select line at the end the query would work with in SAP, but keep it give give you an error. SP is the best option for this.
DECLARE @date DATE
DECLARE @delrows INT
DECLARE @delquan INT
DECLARE @a INT
DECLARE @recrows INT
DECLARE @recquan INT
SET @a=0
IF object_id('tempdb..#tab') IS NOT NULL
BEGIN
   DROP TABLE #tab
END
CREATE TABLE #tab
[Date] date,
DeliveryRows varchar(40),
DeliveryTotalUnits varchar(40),
ReceiptsRows varchar(40),
ReceiptsTotalUnits varchar(40),
WHILE @a!=7
BEGIN
SET @date=DATEADD(day,-@a, getdate())
SELECT @delrows=ISNULL(COUNT(DLN1.LineNum),0), @delquan=ISNULL(SUM(DLN1.Quantity),0)
FROM [dbo].[ODLN]
INNER JOIN DLN1 ON [dbo].[ODLN].DocEntry=DLN1.DocEntry
WHERE [dbo].[ODLN].CreateDate = @date
SELECT @recrows=ISNULL(COUNT([dbo].[PCH1].LineNum),0) , @recquan=ISNULL(SUM([dbo].[PCH1].Quantity),0)
FROM [dbo].[OPCH]
INNER JOIN [dbo].[PCH1] ON [dbo].[OPCH].DocEntry=[dbo].[PCH1].DocEntry
WHERE [dbo].[OPCH].DocDate=@date
SET @a=@a+1
INSERT INTO #tab VALUES(@date,@delrows,@delquan,@recrows,@recquan)
END
SELECT * FROM #tab
Suda Sampath

Query is not working correctly

Hi all,
Below query is not working correctly. Please let me know, if you find the mistake
select
a.name,
b.VOD_NAME,
count(xm.ATTRIB_03)
from
siebel.s_vod b
left outer join ISS_OBJ_DEF c on b.OBJECT_NUM=c.PAR_VOD_ID
left outer join vod d on c.VOD_ID=d.row_id
left outer join PROD_INT a on d.OBJECT_NUM=a.CFG_MODEL_ID
left outer join PROD_INT_XM xm on a.row_id=xm.PAR_ROW_ID
where
b.VOD_TYPE_CD='CLASS_DEF'
and
c.LAST_VERS = 0
and
b.vod_name='Componentes'
group by a.name,b.vod_name having count(xm.ATTRIB_03) >=5

user9522927 wrote:
Hi all,
Below query is not working correctly. Please let me know, if you find the mistake
select
a.name,
b.VOD_NAME,
count(xm.ATTRIB_03)
from
siebel.s_vod b
left outer join ISS_OBJ_DEF c on b.OBJECT_NUM=c.PAR_VOD_ID
left outer join vod d on c.VOD_ID=d.row_id
left outer join PROD_INT a on d.OBJECT_NUM=a.CFG_MODEL_ID
left outer join PROD_INT_XM xm on a.row_id=xm.PAR_ROW_ID
where
b.VOD_TYPE_CD='CLASS_DEF'
and
c.LAST_VERS = 0
and
b.vod_name='Componentes'
group by a.name,b.vod_name having count(xm.ATTRIB_03) >=5I couldn't see through the internet what happend when you ran said query. How about helping us out by showing us the evidence that it "is not working correctly".
"Here's a picture of my car sitting in the driveway. Why won't it start?"

Select query is not working in BDC Program

Hi,
I am working in BDC for update valuation class for T-code mm01.Actually In this BDC i am using two recoding based on material type.
i am using two internal table : I_DATA and ITAB
Use I_DATA to hold excle data in which material No, plant , valuation type , valuation No. and ITAB for material No, material type Only.
So, i am fetching material Type ( MARA-MTART ) through select query. But Select query is not working. and also i did check MARA table according that Material Number then material no. exit in Mara Table.
Note : at run time I_DATA have 1 row but ITAB have 0 row ....
DATA: BEGIN OF I_DATA OCCURS 0,
MATNR TYPE MARA-MATNR,
WERKS TYPE MARC-WERKS,
BWTAR TYPE RMMG1-BWTAR,
VERPR TYPE BMMH1-VERPR,
BKLAS TYPE MBEW-BKLAS,
STATUS TYPE C,
END OF I_DATA.
DATA : BEGIN OF ITAB OCCURS 0,
MATNR LIKE MARA-MATNR,
MTART LIKE MARA-MTART,
END OF ITAB.
Loop at I_DATA.
select matnr mtart from mara into table itab where matnr = I_DATA-matnr.
endloop.
Guide me..........

If you use your
Loop at I_DATA.
select matnr mtart from mara into table itab
    where matnr = I_DATA-matnr.
endloop.
At end of loop, itab will only contain the result of the last select, so use a
Loop at I_DATA.
select matnr mtart from mara APPENDING table itab
    where matnr = I_DATA-matnr.
endloop.
better
if I_DATA[] is not initial.
select matnr mtart from mara into table itab
    FOR ALL ENTRIES IN i_data where matnr = i_data-matnr.
endif.
Some Remarks
- If actually required (where does I_DATA come from, is it an external format, you need the internal value to use in SELECT statement), check via SE11 the correct [conversion exit|http://help.sap.com/saphelp_nw04/helpdata/en/35/26b217afab52b9e10000009b38f974/content.htm] associated with domain MATNR (Is it truly ALPHA, and not something like MATN1, so [CONVERSION_EXIT_MATN1_INPUT|http://www.sdn.sap.com/irj/scn/advancedsearch?query=conversion_exit_matn1_input])
- You could try to use BAPI like [BAPI_MATERIAL_SAVEDATA|http://www.sdn.sap.com/irj/scn/advancedsearch?query=bapi_material_savedata] and not BDC
Regards,
Raymond

Why select query is not working?

CREATE OR REPLACE TYPE prod_type AS OBJECT (
pid INT,
pprice NUMBER,
MEMBER PROCEDURE display(pid IN NUMBER));
create table prod of prod_type (pid primary key);
CREATE OR REPLACE TYPE deal_type UNDER prod_type (
ctr NUMBER,
OVERRIDING MEMBER PROCEDURE display (pid IN NUMBER),
insert into prod values(deal_type(101, 4, 1));
insert into prod values(deal_type(102, 5, 0));
------below given select query is NOT WORKING ---------
select ctr from prod p where p.pid=101;
Thanks,
-Nid

------below given select query is NOT WORKINGWondering how you inserted data ...
SQL> CREATE OR REPLACE TYPE prod_type AS OBJECT (
2 pid INT,
3 pprice NUMBER,
4 MEMBER PROCEDURE display(pid IN NUMBER));
5 /
Type created.
SQL>
SQL> create table prod of prod_type (pid primary key);
Table created.
SQL>
SQL> CREATE OR REPLACE TYPE deal_type UNDER prod_type (
2 ctr NUMBER,
3 OVERRIDING MEMBER PROCEDURE display (pid IN NUMBER),
4 );
5 /
Warning: Type created with compilation errors.
SQL> sho err
Errors for TYPE DEAL_TYPE:
LINE/COL ERROR
4/1      PLS-00103: Encountered the symbol ")" when expecting one of the
         following:
         , not pragma <an identifier>
         <a double-quoted delimited-identifier> final instantiable
         current order overriding static member constructor map
SQL> CREATE OR REPLACE TYPE deal_type UNDER prod_type (
2 ctr NUMBER,
3 OVERRIDING MEMBER PROCEDURE display (pid IN NUMBER));
4 /
Warning: Type created with compilation errors.
SQL> sho err
Errors for TYPE DEAL_TYPE:
LINE/COL ERROR
1/1      PLS-00590: attempting to create a subtype UNDER a FINAL type
SQL>You made an attempt to create a subtype UNDER a FINAL type - that the reason why can not work ...
Avoid deriving a subtype from this FINAL type.
HTH

Excel 2010 MS Query is not working

Hi, I am in the process of upgrading all my Excel 2003 spreadsheets to Excel 2010. I am running into problem with the MS Query. Spreadsheets have MS Query linking to MS database. However, when I open some of the spreadsheets, the MS Query
is not working ie. the blue circle keeps turning and then not responding. It is very weird that this MS Query is working fine with some spreadsheets but not couple and they are all linking to the same database except a small different in criteria. I
tried to re-create the Query in the spreadsheet in Excel 2010 by going to Data>From Other Sources>From Microsoft Query and select the database. Once I set up the criteria and click Return data, the Query gets stuck.
Please help! Any comments/suggestions will be appreciated.
Thanks

Hi,
There are many possible causes that can crash MSQuery in Excel 2010.
First, please make sure we have installed the latest Office 2010 and Windows patches.
Second, Please read the Blog, it explains one typical crash scenario.
=====
AppName: msqry32.exe AppVer: 14.0.4750.1000 ModName: msvcr90.dll
There are several possible resolution you can try to resolve the above crash:
1. When you launch MS Query, just disable the option "Validate queries before saving or returning data", this is the fifth box in the options menu.
The only problem is that if you have made any mistake in your query, you'll only be noticed when receiving the data in excel.
2. Repair all the keys into registry at the following place:
[HKEY_CURRENT_USER\Software\ODBC\ODBC.INI\ODBC]
For example:
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\ODBC\ODBC.INI\ODBC]
"TraceFile"="C:\\DOCUME~1\\...USERNAME...\\IMPOST~1\\Temp\\SQL.LOG"
"TraceDll"="C:\\WINDOWS\\system32\\odbctrac.dll"
http://blogs.technet.com/b/asiasupp/archive/2011/11/07/msquery-randomly-crashed.aspx
=====
Third, start the Excel 2010 with
safe mode, it helps us confirm if some add-ins cause this issue.
Hope it's helpful.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in
Office programs.

Characteristic "Master Data" setting in Query definition not working?

Hi,
I am having a problem with a query definition. (BI 7.0)
The query comprises the following definition which relate to displaying Milestone dates for respective projects in a time series so the dates are populated in the correct column in a time series:
Filter
Project Definition = Fixed Single Project Definition
Fiscal Year Variant = K4
Project Profit Centre = Hierarchy Node
Project Plant = Fixed Single Value
Free Chars
Network
Network Activity
Activity Element
Rows
Project Plant
Project Profit Centre (With hierarchy)
Project Definition
Milestone Type (Setting in characteristic to pick up Master Data)
CSR Relevant    (Setting in characteristic to pick up Master Data)
      Structure
           Actual
           Scheduled
    (Actual: Value type = Actual, Origin = Manual ,Event = Start)
    (Scheduled: Value type = Actual, Origin = Scheduled ,Event = Start)
Columns
Key Figure structure of 12 key figures in a time series
Selection
Key Figure = Date
Fiscal Year/Period = Current Fiscal Year / Period (SAP EXIT) (With Offset 1 to 12)
FYI
When I run the above it comes back correctly. However when I add "MILESTONE" (Characteristic setting (Posted Values) to the Query Definition immediately after the "Milestone Type" and before CSR it does not work it just is hanging for a considerable time.
I am not using "Master Data" for the "Access Type for Result Vales" for the additional characteristic "MILESTONE" just "Posted Values".
I was expecting that it would just show all Milestone types as per Master Data but just the Milestones that are posted for this result.
I would appreciate a solution to this issue and an explanation to why it hangs when I add the "MILESTONE" characteristic to the definition as explained above.
Thanks in advance..
Stevo

Hello there,
Putting Milestone in the rows in the query definition is not being hang there (i.e., while creating and saving the query) right?
It is stucked while executing the query isn't it so?
That's because you have too many records to be desaggregated by milestone characteristic, and this is indepently of posted values in the characteristic settings.
Putting milestone characteristic in the free characteristics will allow you to run the query, but desaggregate it (add it to the rows) will be to much information to read from your dataprovider (this is just a guess).
If it is being stucked in query execution whike milestone is in the rows. Try this for example:
Add milestone to the free chars. Execute the query. Filter milestone characteristic while still in the free rows and choose a value that you are pretty sure has the smallest records in the Dataprovider (could be for example value #). Than drill down milestone to the rows. You'll see that it can be executed without any problem.
Diogo.

Optional BEx query variables not working in WebI

Hi,
I have an Webi report based on Bex Query using BICS connection.
One characteristic is restricted with two variables. First an authorization variable and additional with an input ready variable.
This input ready variable is optional. When it comes up in webi and you choose a value it doesn't filter on it.
We are on BO 4.1. SP3 and BW 7.31.
With SAP_ALL the optional prompt is working, but for a user with limited access, the optional variable doesn't work.
I have already made a RSRT trace with a test user. But I'm not sure what's the problem.
Trace returned:
S_RS_AUTH RC=4 --> BIAUTH=0BI_ALL; type=RF;name=BICS_PROV_OPEN;
But I don't want to give the user 0BI_ALL, otherwise my analysis authorizations for this info object would be obsolete.
Any ideas?
Thx and Regards,
Katharina

Hi Neetika,
thank you for your advice!
I tried the filter without authorziation variable and it was working.
I in addition I tried another option: I defined auth variable as input ready and deleted filter variable and that would work working.
With this setting I recognized that for the authorization variable all allowed values are set as default values! If you execute query with SAP_ALL no default is set, but with limited access the allowed values are set as default.
This may be the problem here. I don't know if this behaviour is by design or if there is a problem with rights?
But now I know where the problem comes from.
Regards,
Katharina

Condition - Query Designer not working in BEx

Hi all,
I have used Condition in my Query in Query designer. it is to calulate the top 10 customer. when i execute the report in RSRT , condition is not working properly.
But, at the same time , i am executing my same query on portal and condition is working on portal.
We are on EHP 1 . please suggest.
Regards,
Macwan James.

Hi James,
There are certain functions about condition which are only available for 7.x runtime (Java Web, Portal) and are not available for 3.x runtime (transaction RSRT, BEx Analyzer, ABAP Web).
For example this one:
http://help.sap.com/saphelp_nw70/helpdata/en/43/2695d2fd2f0d23e10000000a1553f7/frameset.htm
● Most Detailed Characteristic Along the Rows or Columns
This option is optimized for threshold value conditions. The condition is applied to the most detailed characteristic of the rows or columns.
Note that this function is not supported when executing the query in the BEx Analyzer.
If you have set to "Most Detailed Characteristic Along the Rows or Columns" in Query Designer, portal would execute properly according to this setting while RSRT would use one of the other two settings (seems to be "Single Characteristics and Characteristic Combinations" as I remember) which lead to unexpected result. This is my assumption how it is in your case.
Regards,
Patricia

Web Query (.iqy) not working in Excel after upgrade to 11.1.1.6

After upgrade 11.1.1.5 to 11.1.1.6, the Web Query (.iqy) does not work. After open the .iqy file in Excel, entered the user and password, it only pulls in "PK" in one cell, instead of the expected analysis report. This was working in 11.1.1.5 before upgrade.
Does anyone know how to correct this issue? Is this a bug in 11.1.1.6, or required some new configuration settings?
Thanks in advance.
DX

A bug has been registered.
Bug 14040587 - OBIEE 11.1.1.6: OPENING WEB QUERY (.IQY) FILE IN EXCEL SHOWS JUNK CHARACTERS.

Using parameters in a select query sometimes not working

I use parameters throughout my code - usually without problem, but for some reason in one case it does not return a result. When I modify the querystring to contain the value instead of using parameters it works. Is it because I'm secting a clob? or is it because I'm using a 9i ODP.net dll against a 10g database? this is c# 2.0
here's the source code that does not work for me - REQUEST_DATA is a clob:
    public String loadRequest(String PSRNumber)
        String returnVal = null;
        ConnectionStringSettings connectionInfo = System.Configuration.ConfigurationManager.ConnectionStrings["Scribe"];
        OracleConnection myConnection = new OracleConnection();
        String strSQL = "select PSR, REQUEST_DATA from stats.request where PSR = :PSR";
        try
            myConnection.ConnectionString = connectionInfo.ConnectionString;
            OracleCommand cmd = new OracleCommand(strSQL, myConnection);
            cmd.CommandType = CommandType.Text;
            cmd.Parameters.Add("PSR", OracleDbType.Varchar2).Value = PSRNumber;
            myConnection.Open();
            OracleDataReader dr = cmd.ExecuteReader();
            if (dr.Read())
                returnVal = dr.GetOracleString(dr.GetOrdinal("REQUEST_DATA")).ToString();
            else
                returnVal = null;
            dr.Dispose();
            cmd.Dispose();
        catch (OracleException ex)
            printError(ex.Message);
        finally
            myConnection.Close();
            myConnection.Dispose();
        return returnVal;
    }when I replace the line generating the sql, and remove the lines pertaining to parameters it works:
String strSQL = String.Format("select PSR, REQUEST_DATA from stats.request where PSR = {0}", PSRNumber);
I'm fine just using this as a workaround, but I need an explanation why the other does not work - I prefer to use parameters.
Message was edited by:
user633546

I figured it out. thank you for your help in pointing me in the right direction.
the problem was there was a trailing space in the data.
when the data for that table is numeric for every record, the query allows me to leave out the single quotes. Trailing spaces do not seem to cause the database to see it as non-numeric - leaving out the quote still finds the record even if there is a trailing space.
but when I put in the quote, it is not an exact string match, so it could not find the record. sometimes this flexibility gets me into trouble :\

My select query in not working

hi
this my select query
select * from J_1IEXCHDR where werks = 'DT*'
this is not working
i want result where werks like DT01, DT09 and many statting with DT
so plz tel me how to write for like .
thank

Hi,
>
Guptaprashant wrote:
> hi
>
> this my select query
>
> select * from J_1IEXCHDR where werks = 'DT*'
>
>
> this is not working
>
> i want result where werks like DT01, DT09 and many statting with DT
> so plz tel me how to write for like .
>
> thank
Use:-
select * from J_1IEXCHDR where werks like 'DT%'.
Regards,
Tarun

Execute Query is not working

Similar Messages

Maybe you are looking for