Execute Query - Not finding data

I have a form with a Master-Detail-Detail (I will refer to them as Master, Detail_1, Detail_2) relationship between blocks.
There is a WHEN_NEW_FORM_INSTANCE trigger that populates a record group and then sets a list item in Detail_1 to the record group values. All other behavior is default forms.
When I perform an execute query using the default toolbar buttons, no data is returned even though data exists in the corresponding tables.
I am thinking that the setting of the list item may be causing the query to fail but I'm not sure. I have commented out the working code in the WNFI trigger and just have a NULL; statement as a test, but the default query still returns no data.
Do I need to clear the list item of its values? If so, at what point should I do this (enter-query)?
My Forms version is 10.1.2.
I appreciate guidance on this matter.

The query may be failing because you are retrieving a record that has a value that is not listed in the list item's list of values. Use the list item's Mapping of Other Values property to tell Forms what to do when it retrieves a value not found in the list of values. Also see the CONVERT_OTHER_VALUE built-in.

Similar Messages

Can not find data in virtual cube

Experts,
I can not find data in virtual cube with services function module (copying Z_RS_BCT_FIGL_DATA_GET_VC10 from RS_BCT_FIGL_DATA_GET_VC10).The standard cube is maintained with data.
Can anybody tell me what could be the reasons the data is coming through Virtua cube.
Thanks,
AK

Hi,
i_basic_infoprov is the name of the provider where the data is selected from. This must be a basic provider that contains data. What I meant was, create a copy of fm RS_BCT_FIGL_DATA_GET_VC,1 maybe as Z_BCT_FIGL_DATA_GET_VC1, and enter the name of this fm in the properties of your virtual cube. For that fm it might also be a good idea to enter a default value for i_infoprov. And this should be the name of your virtual cube.
regards
Siggi

Web Analysis Error -- Error while executing query and retrieving data

Regarding Web Analysis:
We have a number of reports that we created. yesterday they were all working fine. today we try to open them and most are generating an error.
The error is:
Error while executing query and retrieving data.; nested exception is:
com.hyperion.ap.APException: [1033] Native:
1013033[Thu Oct 22 09:08:17
2009]server name/application name/database name/user name/Error91013033)
ReportWriter exit abnormally
Does anyone have any insight into what is going on?
My version information is:
Hyperion System 9 BI+ Analytic Administration Services 9.3.0.1.1 Build 2
Web Analysis 9.3.0.0.0.286
Thanks in advance for your help.
DaveW

Hi,
And also click on check option by opening the query in Query designer,as Mr . Arun suggested.
And if you get any error in checking, see the long message(detail).
With rgds,
Anil Kumar Sharma .P

Query not displaying data

Hello BW experts,
I am having an issue where in my query is not displaying data even though there is data in the cube in production.
But the same query is displaying data for the same selection in QA system.
I have executed the tests in RSRT, but am not able to find anything.
Please give your valuable inputs.
Thanks in Advance
BW learner

Hi,
Check the filters of your query, Is there any selection made where you are going to get only march data which is present in your production system.
Check the info cube data by giving the same filter values as in the query definitation. If you didnt find any data, then your query is working fine.
check this and let me know...
if you find some data in the cube with the same filter selection, then give me the data flow of your query, which means, whether the query is executed on Multiprovider or cube?
Regards,
Patil.

Execute query not working in CALL_FORM

Hi,
I am opening FormA from FormB, when clicking a button, and pass the values to Form B,
by using the global variables, and assigned these values in the pre-query of Form B, When clicking button Form B is
opening, but nothing displaying, I need to click on Execute Query to get the data displayed.
I am calling Form B by using CALL_form('FORMB.FMX');
Statment In the WHEN-NEW-FORM-INSTANCE of Form B
EXECUTE_QUERY; << This not working >>
GO_BLOCK('NRT_HEADER');
Oracle & Forms Verison : 10g
Thanks in advance
Rizly

Thanks Francois & Tony.
The problem got solved by using NO_HIDE
CALL_form('POPUP_NRT_FILE_HEADER.FMX',NO_HIDE);
Now the data & form is visible, But when I click on the any other field ( other than the first field), the screen is becoming blank, again I need to click on the Execute Query button, but after that I can click on any other field it wont go invisible.
THanks in advance
Edited by: RizlyFaisal on Sep 25, 2008 2:30 AM

Execute Query not working on custom forms

Hi
After upgrading from 11.5.10.2 and Oracle 9.2.0.5 to ATG6, AD6, oracle 10.2.0.4, Forms 6.0 (Form Compiler) Version 6.0.8.28.0 . The execute query (F11 & CTRL F11) is not working on custom forms. But after tabbing from one column to another column then press CTRL F11 is working.
Please any one help me on this issue.
Thanks
sva

Hi
I found this error in the trace file. Please help me what is the problem, the data is there in the table.
Out Argument 0 - Type: String Value: ORA-01403: no data found
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: parameter.G_query_find
Out Argument 0 - Type: String Value: NULL
Executing USER_EXIT Built-in:
In Argument 0 - Type: String Value: FND MESSAGE_CLEAR
MCXQPBULKINVOICEENTER, -1, Built-In, Entry, -1196178744, USER_EXIT
TSE FSERVER_START -1 1407 1279530838565801000
TSE FSERVER_END -1 0 1279530838579778000MCXQPBULKINVOICEENTER, -1, Built-In, Exit, -1196091744, USER_EXIT
Executing COPY Built-in:
In Argument 0 - Type: String Value: Entering app_debug.clear
In Argument 1 - Type: String Value: global.frd_debug
Executing FIND_GROUP Built-in:
In Argument 0 - Type: String Value: APP_DEBUG
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_debug.free.
In Argument 1 - Type: String Value: global.frd_debug
Executing MESSAGE Built-in:
In Argument 0 - Type: String Value: FRM-41003: This function cannot be performed here.
In Argument 1 - Type: Number Value: 121
Unhandled Exception ORA-100501
State Delta:
MCXQPBULKINVOICEENTER, -2, Trigger, Exit, -1190876744, ON-ERROR
##### CTIME STARTS HERE
# 8 - MCXQPBULKINVOICEENTER:BLOCKNAME.RADIO_BUTTON81.1279530839956685000
KEY Execute_query
Error Message: FRM-41003: This function cannot be performed here.
N-ERROR Trigger Fired:
Form: MCXQPBULKINVOICEENTER
State Delta:
MCXQPBULKINVOICEENTER, -2, Trigger, Entry, 181183256, ON-ERROR
MCXQPBULKINVOICEENTER, -1, Prog Unit, Entry, 181304256, /MCXQPBULKINVOICEENTER-3/P58_07_DEC_200909_04_40
Executing COPY Built-in:
In Argument 0 - Type: String Value: Entering app_standard.event. Event is ON-ERROR.
In Argument 1 - Type: String Value: global.frd_debug
Executing ERROR_TYPE Built-in:
Out Argument 0 - Type: String Value: FRM
Executing ERROR_CODE Built-in:
Out Argument 0 - Type: Number Value: 41003
Executing ERROR_TEXT Built-in:
Out Argument 0 - Type: String Value: This function cannot be performed here
Thanks
sva

Execute query not give result

Hi master
Sir lets suppose I have emp form and I put under blow code in when button press event
When_Button_press
go_block('emp');
enter_query;
:emp.deptno := 10;
execute_query;
but
when I press button then no result no data in any field and curser present in first column or form.
It is my idea the execute query are not run or these command are not run
:emp.deptno := 10;
execute_query;
system not replace data and no run execute_query
please give me idea
Thanking you
Muhammad Fahim Aamir

Hi master
Sir when I use this code with numeric data work fine
DECLARE
     DD VARCHAR2(15);
BEGIN
     DD:=10;
set_block_property('emp', default_where, 'where
DEPTNO='||DD);
go_block('emp');
execute_query;
set_block_property('emp', default_where, '');
END;
But When use with string data then not give result I
press f8 and show all record
With character not give any result
DECLARE
     DD VARCHAR2(15);
BEGIN
     DD:='SALESMAN';
set_block_property('emp', default_where, 'where
RTRIM(EMPNO)='||DD);
go_block('emp');
execute_query;
set_block_property('emp', default_where, '');
END;
Please give me any ideaYour problem is in your where clause you do not put the word where in the where clause as it is assumed
I usually declare a variable v_where VARCHAR2(200);
and then assign it my new where clause
v_where := ' RTRIM(EMPNO)='||DD;
GO_BLOCK ('emp');
SET_BLOCK_PROPERTY('emp',default_where, v_where);
EXECUTE_QUERY;
v_where := null; ---clean up
This allows you to easily put your where clause into a message
message(v_where);
so you can see what is really being queried. This is very useful when you are using multiple values to make sure you have all the apostrophes that you need
eg: v_where := v_where := 'item_type <> ''CAT'''||' and user_id = '''||:login.user_id||'''';

Query not displaying data if i launch in web.

HI,
i have created one query.
If i open the same in Bex Analyser i am getting data.(dispalying data).
If i launch the same query through web its not dispalying data.error message as no data available.
Please tell me wat may be the reason.
thanks & regards,
KPS Moorthy

if you see the result in Bex, then you should see the same result in web also unless you are giving any variables value values executing on web.
I hope you are executing query on web using query designer.
Regards
Pankaj

Sql query not qualifying date- what did I do wrong?

I am not getting the date request from this query, it produces all records in table- not my date request....What am I doing wrong.
select * from table
where (dep_apt in ('123','T123','456','T456'))
or (dest_apt in ('123','T123','456','T456'))
and fpdate >= '23-APR-07'
order by fpdate;

> It is not a date format issue- I set up a trigger to set the date formats on all transactions to be a valid date string that I need.
Perhaps it isn't in this case, but surely
> and fpdate >= '23-APR-07'
is just asking for trouble? Why would you not use a date expression?
Are you sure you will never have to deal with dates < 2000 (if nls_date_format uses YY) or > 2049 (if using RR), or a language other than English? Didn't the industry spend billions not so long ago cleaning up all the crappy 2-digit year values, and didn't we chuckle at the 1970s COBOL programmers who (we were told) put them there to save a couple of cheap bytes? If hardcoding a date literal, why not DATE '2007-04-23' anyway?

Execute query not workin on application server

i have upgraded my form to 10.1.2.0.2 successfully and can host them using the application server ....
in the form i have got various tab canvas,stacked canvas,contect canvas.....
but my execute query function is not working ...dont know why

@abdetu...
hey buddy every thing is working fine now ....
according to your suggestion i checked the errors...
and found that some of the columns were not exported properly from the targer database ...
after adding the database everything started to work perfectly fine
once again thnx a lot for ur help and time

Please see this query, not showing data Why?

I created a report and write following query,it was working well since last 4 months but today automaticly not showing data I can undertstand why?
Becuase I didnt make any changes in this query.
Please help me
Urgent
SELECT ALL MERCH_ORDER.ORDERNO, MERCH_ORDER.ORDERDATE, MERCH_ORDER.SHIP_DATE, MERCH_ORDER.PONO,
MERCH_ORDER.SUBPP, MERCH_ORDER.PJNO, BUYER.B_NAME, BUYER.B_AJENT,
MERCH_ORDER.ITEM, MERCH_ORDER.FABRIC, MERCH_ORDER.QUALITY, MERCH_ORDER.COMPOSITION,
MERCH_ORDER.P_SIZE, MERCH_ORDER.QUANTITY, MERCH_ORDER.Q_UNIT,
MERCH_ORDER.NETWHT, MERCH_ORDER.WT_UNIT, MERCH_ORDER.TERM, MERCH_ORDER.COMM,
MERCH_ORDER.PRICE, MERCH_ORDER.CUR_SYMB, MERCH_ORDER.STATUS, MERCH_ORDER.REMARKS,
MERCH_ORDER.WONO, MERCH_ORDER.PRONO, MERCH_ORDER.PES_QUANTITY,
MERCH_ORDER.PES_Q_UNIT, MERCH_ORDER.PES_PRICE, MERCH_ORDER.PES_CUR_SYMB
FROM BUYER, MERCH_ORDER
WHERE MERCH_ORDER.CANCEL IS NULL
AND (MERCH_ORDER.B_CODE = BUYER.B_CODE)
and merch_order.orderno not in
(select export_order1.orderno from export_order1)
ORDER BY MERCH_ORDER.ORDERNO

Where "first table" is merch_order and "second table" is export_order1?
How many distinct orders are in each table?
Are there any NULL order numbers in either table?
I'd put money on the fact that if commenting out a clause causes a number of rows to be returned, that clause is filtering out all the rows. You'll need to go through your data to figure out why the NOT IN clause is filtering out all your rows.
Justin

Query not displaying data IT0019

Hello Experts,
I created an ad hoc report by consulting the information I need from the IT0019 infotypes along with many others. Running the query gives no data on this infotype. I reviewed the configuration, but no encounter problems or differences. Also check the table, but there are no data in the query.
Regards.

Hi Pablo,
I think problem with Infosets. While creatiing infoset, you have not added IT0019 which is part of PNPCE logical data base.
Check your infoset and add IT0019.
Regards,
Purnima

[Jar Executable] Could not find the main class. Progam will exit.

Hello,
I am a French person. Excuse me for my English who is not perfect.
I seek to create an achievable "jar". I followed the instructions given in the url http://java.developpez.com/faq/java/?page=execution#creationJar, and on the site of Sun.
I have today only one class which I posed in a specific repertory "Class".
Appli
|__Class
|__Src
|__META-INFThe contents of my "Manifest" is stored in repertory META-INF with the name "Commission2007.MF" and its contents are as follows:
Manifest-Version: 1.0
Created-By: 1.5.0 (Sun Microsystems Inc.)
Main-Class: Commission2007
.I've left the space line at the end of the file.
Here the result of execution of my order "jar":
C:\#Java Dev\2007_Commissionnements>jar cvfm Commission2007.jar META-INF/Commission2007.MF -C Class/ .
manifest ajout�
ajout : Class/./(entr�e = 0) (sortie = 0)(0% stock�)
ajout : Class/./Commission2007.class(entr�e = 9060) (sortie = 4547)(49% compress�s)I controlled the assignment of the extension "jar" in "Working station = > Tools = > Files Option = > Files Type = > .jar Selection = > Advance =
Open = > Change = >" C:\Program Files\Java\jre1.6.0\bin\javaw.exe "- gravel bank" %1 "% *". Thus not of problem on this side there!When I double click on the file "jar" lately created, I have the error message according to: "Could not find the main class. Progam will exit. " I do not understand the reason of this error. I consulted all the subjects on the treating Net of this subject but without result. I thus call upon you.
Perhaps that the cause is in my code which however functions perfectly when I carry out it with the order: "Commission2007 java". The class "hand" is quite present to see the code below. You can find the totality of my code on the bond http://www.developpez.net/forums/showpost.php?p=1870361&postcount=74
import �
public class Commission2007 extends Frame implements ActionListener, WindowListener
     �
     // Construction de la class EdText
     // D�finition et affichage de la bo�te de dialogue
     Commission2007()
     �
     // D�finition d'une frame pour l'application et affichage de la
     // bo�te de dialogue
     public static void main(String args[])
          Commission2007 editer = new Commission2007();
          editer.show();
          editer.addWindowListener(editer);
}I thank you in advance for your assistance.
Cordially, Gilles.

Salut,
It has been my experience that it is never a good idea to name your .MF file anything else other than MANIFEST.MF.
Try naming your .MF file MANIFEST.MF and rebuild your JAR.
Bon chance.

QBE style(Find-Execute) Query not executing when VO has bind parameter

I have an Entity Based ViewObject that is composed of 3 Entities so the entities are related through an Assoc. Then the ViewObject also has a bind paremeter defined and used in the WHERE clause.
In my page everything is fine until when I use/click on the Find operation on the JSF page. When the Find operation is executed the page/form goes blank so I can enter by QBE query. Now when I Execute my search by executing the ExecuteWith params operation. Nothing is happening to the screen, it seems that query was not executed. Although there was no errors or exceptions displayed.
However if I remove the bind parameter, and execute the Execute operation instead after going to Find mode, the query is executed properly and I get expected results.
My problem is a bit general, but are there anyone who had a similar problem like this? Im still in the process of creating a test case.
regards,
Anton

Hi Frank,
But the "ExecuteWithParams" operation provides the bind variable right? (i had the value hardcoded on the pagedef). So it must have supplied a value. I also noticed that this is happening only when if the VIewObject contains two or more Entities. If the Viewobject has only 1 entity, the ViewObject queries properly.
Anyway Frank, I had found a fix for this. I set an InvokeAction on the pagedef that binds to the ExecuteWithParams that is invoked during page load only(!postback condition). and then I just use the Find-Execute operations instead of the Find-ExecuteWithParams operations that I used previously.
I will try to replicate the issue again to investigate what's really going on. I just want to know if its a bug or just an expected behavior or i just made a mistake.
regards,
Anton

Error when executing Query with user date settings = mm/dd/yyyy

Hi all,
I created a remote cube with datasource = TCURR table with proper conversion of the date etc.
The query on top of this remote cube works fine if my user date settings is set to dd.mm.yyyy
But when a user in USA, with user date settings = mm/dd/yyyy, executes the same query, they get a message
SYST: Date 31/05/2006 not expected.
Message no. FGV004
The input variable on the Query is on 0CALMONTH.
This message appears immaterial of what calmonth input I give.
has anyone encountered this error? if yes, what could be the solution please?
thanks
Emmanuel

Hi,
This is in regard to the user settings maintained in transaction /nsu3.Please follow the below link.
http://web.mit.edu/sapr3/docs/webdocs/getstarted/gsSETTINGS.html
You need to change the settings as required.
Hope this helps.
Thank you,
Prem

Execute Query - Not finding data

Similar Messages

Maybe you are looking for