Execute SSIS Package from JOB which contains Execute Process Task calling a .bat file

Hi All,
I have a EXCEL Macro needs to be called from SSIS. We could not use Script task because of some internal reason.
So we have taken an approach to call a .BAT file using Execute Process Task. This .BAT file will call a .VBS file which will execute the EXCEL Macro.
The SSIS Package is running good if I execute the package from BIDS.
But the real problem is with the scheduling this SSIS Package using SQL JOB.
If i execute this SSIS package from SQL Server Job, its executing the whole package successfully except the Execute Process Task.
So the overall issue is SQL Server Job is not executing properly if I call any .BAT file from the SSIS Package.
Please give me suggestion to get rid of the issue. Thanks in advance.

Hi Sai.N,
If you run the SQL Server Agent job manually from SSMS, does the package execute properly? If the package executes properly when you run the job manually, the issue should occur due to permission issue. In this case, I suggest that you create a SQL Server
Agent proxy based on the current Windows account which you use to log onto the operating system, and run the job under the proxy account.
If it is not the issue, please enable logging in the package as Visakh mentioned and post the warning/error message for further analysis.
Regards,
Mike Yin
TechNet Community Support

Similar Messages

Getting Error while Execute SSIS Package from Console Application

Dear All,
SSIS package working fine directly.
I got following error while execute SSIS package from C# console application.
The connection "{79D920D4-9229-46CA-9018-235B711F04D9}" is not found. This error is thrown by Connections collection when the specific connection element is not found.
Cannot find the connection manager with ID "{79D920D4-9229-46CA-9018-235B711F04D9}" in the connection manager collection due to error code 0xC0010009. That connection manager is needed by "OLE DB Destination.Connections[OleDbConnection]"
in the connection manager collection of "OLE DB Destination". Verify that a connection manager in the connection manager collection, Connections, has been created with that ID.
OLE DB Destination failed validation and returned error code 0xC004800B.
One or more component failed validation.
There were errors during task validation.
Code :
public static string RunDTSPackage()
Package pkg;
Application app;
DTSExecResult pkgResults;
Variables vars;
app = new Application();
pkg = app.LoadPackage(@"D:\WORK\Package.dtsx", null);
Microsoft.SqlServer.Dts.Runtime.DTSExecResult results = pkg.Execute();
I have recreate the application with again new connection in SSIS.
Still not working, Please provide solution if any one have.
DB : SQL Server 2008 R2
Thanks and regards,
Hardik Ramwani

The connection "{79D920D4-9229-46CA-9018-235B711F04D9}" is not found. This error is thrown by Connections collection when the specific connection element is not found.
Cannot find the connection manager with ID "{79D920D4-9229-46CA-9018-235B711F04D9}" in the connection manager collection due to error code 0xC0010009. That connection manager is needed by "OLE DB Destination.Connections[OleDbConnection]"
in the connection manager collection of "OLE DB Destination". Verify that a connection manager in the connection manager collection, Connections, has been created with that ID.
Are you sure that you are running the same package via .NET which works fine from Visual Studio?
By reading error message, I can say that you have copied OLEDB task from another package OR you have deleted one OLEDB connection manager. Now when package is run this task tries to use the connection manager and not found thus throws error message.
Open all OLEDB destination tasks and you find connection manager missing. Connection Manager name should be provided there
Cheers,
Vaibhav Chaudhari
MCSA - SQL Server 2012

Error executing SSIS packages from Agent

Hi All,
     I designed SSIS package that loads data from Oracle table to SQl server table along with loading data into Diension and fact tables using SSIS packages only. First I created all SSIS packages that loads data into Staging tables from
Oracle table in next level loading data into Dimension table and final level is loading data into Fact table. At lasts I created One master package there I'm calling all packages (Execute package task) differently.
Configuration type: Parent package configuration for All child packages. XML config for parent package.
When I execute SSIS package from BIDS data is loading up to Fact table. When I execute SSIS packages through Sql server agent ( Using File System Deployment)When I execute SSIS package from Sql server agent it is throwing an error message like
Message
Executed as user: . Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved.    Started: 10:45:10 PM Error: 2013-10-17 22:45:12.60
Code: 0xC00220E6     Source: Master Data      Description: There is no project to reference. End Error Error: 2013-10-17 22:45:12.61     Code: 0xC0024107     Source:
Master Data      Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 10:45:10 PM Finished: 10:45:13 PM Elapsed:
2.59 seconds. The package execution failed. The step failed.
I'm uploaded config file also while at the time of scheduling job.
Regards,
Praveen
Regards, Praveen

Hi Praveen,
The issue may occur if the SQL Server Agent Service Account or Proxy account doesn’t have sufficient permissions. Please create a SQL Server Agent Proxy account that has the permissions to execute the package and perform update operations on the SQL Server
fact tables.
Reference:
http://technet.microsoft.com/en-us/library/ms175834.aspx
Regards,
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Problem with execute SSIS package from stored procedure

Hi,
I would like to execute SSIS package from stored procedure. Therefore, I implemented sp which exec SSISDB.CATALOG.CREATE_EXECUTION method. When I try to test it from SSMS on remote server, I got error that
I was able to solve by adding “WITH EXECUTE AS …”. Then I got another error: The server principal "Domain\user" is not able to access the database "SSISDB" under the current security context. On Internet, I found a couple post that describe
how to access SSIS catalog (one of them by Ke Yang -
http://blogs.msdn.com/b/mattm/archive/2012/03/20/ssis-catalog-access-control-tips.aspx). It didn’t help. I’m still getting the error message.
How to debug this issue?
Any suggestion?
Thanks
SQL Server 2014 BI

SSMS does not propagate user credentials thus the error
Arthur
MyBlog
Twitter

*Error executing SSIS Package from BPC 5.1*

All -
I'm trying to execute a perfectly working SSIS package from BPC 5.1. When I execute the package it instantly completes executing (Failure) with nothin written to the Log file.
After doing further analysis, we have found the root cause to be "Sequence Containers" in SSIS Packages. We can execute the same package if we remove the sequence container.
When we try to edit the SSIS package via BPC, containing the Sequence Containers", we receive the following error:
[QuerytoServer] An error occurred while getting a package information. System.InvalidCastException: Unable to cast object of type 'Microsoft.SqlServer.Dts.Runtime.Sequence' to type 'Microsoft.SqlServer.Dts.Runtime.TaskHost' at Osoft.Services.Application.DataMgr.PackageExecute.DTSX.GetPackageInfor()
When we try to edit SSIS packages via BPC, containing NO Sequence Containers", everything is wonderful.
Does anyone have any suggestions, besides removing all of the Sequence Containers and moving the tasks to the base SSIS package level?
I trully appreciate any help you guys can provide.

Hi Lars,
Could you be more specific the step you did?
1. It works fine in Visual Studio,
2. It is not working with Excel Front-end. Call the package from Excel.
3. It worked few days ago, ==> Do you mean it was working with #2 step?
I think this might be caused by authentication,
1. could you check your athentication you have for #1 and #2?
2. Did you introduce BPC DM to call the package? BPC DM uses impersonated ID even you use ID which has restrictive to use system resource, there will be no problem for the authentication.
3. As you see the log, it points FLOW task and OLEDB SOURCE, check your connection string in OLEDB SOURCE also.
Hope this helps,
Regards,
YH Seo

When migrating ssis packages from 2005 to 2012 Activex Script Task component doesn't exist in 2012 version

Hello,
We are migrating the ssis packages from 2005 to 2012.
I'm unable to convert Activex Script Task from 2005 vesrsion to 2012 because in 2012 version Activex Script Task doesn't exist.
Can anyone please let me know what is the alternative way to convert Activex Script Task from 2005 vesrsion to 2012?

Hi Vinay9738,
Have you tried to upgrade the SSIS 2005 packages to SSIS 2012 packages by using the SSIS Package Upgrade wizard? In certain cases, ActiveX script in SSIS won’t work and we need to either modify the script or replace the ActiveX Script with stock SSIS
tasks. You can find the mapping between some most common patterns used in DTS ActiveX Script and SSIS native tasks from the following link:
http://help.pragmaticworks.com/dtsxchange/scr/ActiveX%20Script%20Task.htm
Here is also a useful link about how to convert ADODB object of ActiveX Script to SSIS tasks:
http://help.pragmaticworks.com/dtsxchange/scr/FAQ%20-%20How%20to%20convert%20ADODB%20object%20of%20ActiveX%20Script%20to%20native%20SSIS%20Task.htm
Regards,
Mike Yin
TechNet Community Support

Need help on executing ssis package from ssrs report

i want to develop a load test tool.
we do load test on beta servers i need to capture server statistics during load test and make a report out of it.
basically as a tool to start and stop capturing server info from ssrs report.
Any help is highly appreciated !!

Whats the need of a report for starting and stopping of jobs here? Isnt it enough to capture the details from MSDB system tables or SSISDB tables (in case of 2012) for capturing the details. The package execution can be done using procedures/t-sql scripts
using sp_start_job or catalog.create_execution procedure
http://msdn.microsoft.com/en-us/library/ff878034.aspx
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Error while running SSIS package from Integration service or via Job

Hi All,
I encounter the below error while running SSIS Package from Job or integration service. However on execution completes success fully while running from data tools. The issue occurs after migration to 2012 from 2oo5 dtsx. PFB the error.
SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on OLE DB Source returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by
the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
A buffer failed while allocating 10485760 bytes.
The system reports 26 percent memory load. There are 206110765056 bytes of physical memory with 150503776256 bytes.
free. There are 2147352576 bytes of virtual memory with 185106432 bytes free. The paging file has 208256339968 bytes with 145642921984 bytes free.
The package also runs successfully from other servers. This happens only in one of our server.seems like issue with some sql configuration.

Hi ,
Are you running using SQL Agent Job and Data tools on same server or different?
If it is executing fine using Data tools and failing with Job it might be User credentials issue.Try
to run Job with your credentials by using proxy .
Regards,
Prathy
Prathy K

How to Execute SSIS package through MySQL Procedure

Hi Everyone,
How to Execute SSIS package from MySQL Stored Procedure.
Please share your suggestions on this.
Regards,
Vaishu

I am not sure whether you have SSIS license version installed in the system where MYSQL is there. In order to run SSIS package we need to have DTEXEC executable file and it comes with SSIS license version.
An SSIS package can be executed from command prompt as,
C:\>dtexec /f E:\package.dtsx
I am not expert in MYSQL however in TSQL we can run dos command or scripting language such as vbscript.
Similarly you need to check in MYSQL. This is MSSQL Server forum.
Refer
http://www.ehow.com/how_8789576_call-ssis-package-vbscript.html
http://www.mssqltips.com/sqlservertip/1775/different-ways-to-execute-a-sql-server-ssis-package/
Regards, RSingh

Error while executing SSIS package which contains Script component through SQL Server Agent Job

Hello All,
I have written one SSIS 2012 package which is fetching records from CSV and put it into staging DB and from staging DB , using SSIS script component task, I am inserting data into Dynamics CRM. So far it is working fine when
I manually execute SSIS package.
but when I run the SSIS package using SQL server agent job, I encounter below error. After seeing below error at step "Insert TLM Headers Script Component " I understand that it is failing at script component which I have used in SSIS package,
but I am not sure what is the cause behind that? please advise.
Error:
Executed as user: domain\user account. Microsoft (R) SQL Server Execute Package Utility Version 11.0.5556.0 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved.    Started: 1:21:41 PM Error: 2015-02-25
13:21:45.94     Code: 0xC0047062     Source: Insert TLM Headers Script Component [205]     Description: System.ServiceModel.FaultException: The server was unable to process the request due to an internal
error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to
the client, or turn on tracing as per the Microsoft .NET Framework 3.0 SDK documentation and inspect the server trace logs.    Server stack trace:      at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message
reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter)     at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)     at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage
methodCall, ProxyOperationRuntime operation)     at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)    Exception rethrown at [0]:      at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception
e)    at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.ProcessInput(Int32 inputID, PipelineBuffer buffer)     at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper100
wrapper, Int32 inputID, IDTSBuffer100 pDTSBuffer, IntPtr bufferWirePacket) End Error Error: 2015-02-25 13:21:45.94     Code: 0xC0047022     Source: Insert TLM Headers SSIS.Pipeline
Description: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Script Component" (205) failed with error code 0x80131501 while processing input "Input 0" (215). The identified component returned an error
from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure. End Error
DTExec: The package execution returned DTSER_FAILURE (1). Started: 1:21:41 PM Finished: 1:21:45 PM Elapsed: 4.009 seconds. The package execution failed. The step failed.
Thanks
Pankaj

domain\user account has not proper rights
That being said, often SSIS jobs require a proxy to be runnable and this is how you make one up
http://www.mssqltips.com/sqlservertip/2163/running-a-ssis-package-from-sql-server-agent-using-a-proxy-account/
Arthur
MyBlog
Twitter

Executing an SSIS package from TSQL without using xp_cmdshell?

How can I execute an SSIS package from TSQL without using xp_cmdshell?
I have a web-app which calls some SQL which executes my SSIS package (a DTSX file, but stored in the server). But the security policy for my application won't permit me use to xp_cmdshell.
I want to do this:-
DECLARE @returncode int
EXEC @returncode = xp_cmdshell 'dtexec /sq pkgOne"'
Is there another way for executing a Package without going to the command line (e.g. is there some other system stored proc)?
Thanks

Whoa - don't go taking my words as saying "it should work". I never said that - I just said I know less than you :) I'm assuming that since the CLR is .Net, and you can launch a package from .Net code, you may be able to do so from the CLR.
But... I also know that CLR has lots of restrictions on it, and some of those may cause you to be unable to run it from the CLR.
One thing I will say - I've never heard of anyone doing this. That's got to tell you something about:
Whether it can be done at all... although I think I'd have heard/seen something about how it's not possible.
Whether it's a good idea... maybe other routes are less trouble.
Talk to me now on

Error when execute a package from SQL Server Agent

We have the next problem:
When we execute a package from a Job of SQL Server agent, it shows the success messege, but reviewing the results, the package didnt do all the tasks.
When we run it mannually by MSIS the package, it shows the success message and it works fine.
The workflow of the package is :
1) Shrink the databases (executing a sql file)
2) Backup the databases (Back up Database task of MSIS)
3) Rename the files to .BAK extension (by the Foreach loop container and fyle system task)
4) Execute command to compress the it (by a .bat)
5) Move the compress file to another location (by another Foreach loop)
Manually run correct, but when is a a SQL AGent Job that execute the package it does only the first 2 steps.
we are ussing Microsoft SQL Server 2008 R2 (SP1) - 10.50.2500.0 (X64) Jun 17 2011 00:54:03 Copyright (coffee) Microsoft Corporation Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
We are using a user with administrator privilegies
Cheers

Can you check if account running package has proper access. You may need to define a proxy account for that.
See
http://www.databasejournal.com/features/mssql/article.php/3789881/Proxy-Accounts-in-SQL-Server.htm
http://gqbi.wordpress.com/2014/01/30/setting-up-a-proxy-account-to-run-sql-server-integration-services-ssis-2012-packages/
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Whats the difference between executing a package from SQL and Visual Studio?

Hi,
We have a package that is currently failing to run when deployed to SQL. This has been tried from a schedule and also executed manually both are failing.
I have tried from Visual studio running on various machines (windows 8, server 2012) and in all cases run perfectly.
I am trying to understand the differences between deploying to SQL and running from VS so maybe I can figure out why this is happening.
I have the following errors when I run from SQL.
DTS_E_PROCESSINPUTFAILED - all errors like this point to the 'Sort' tasks in the script
dts_e_processinputerror not enough storage is available
I have tested in four environments and all fail from SQL but not from VS!
Last night I tried from my laptop and executed the package from SQL - it didn't fail but was still running in the morning so I terminated. Note this takes around 20 mins running from VS! why would it be so quick from VS but fail or take so long on SQL?
The test running at the moment is on a server with dynamic memory currently at 14GB. I decreased SQLs RAM to 4GB and it hasn't failed yet but has been running for two hours. Before changing this the package failed after a short time.
I thought it may have something to do with running from a virtual machine but doesn't explain why it couldn't run locally on my laptop.
All ideas welcome :) Many thanks,
Davina

I will try to address issues one by one
The error doesn't seems to be related to SSISDB configuration mode. It may be because of
Change in package definition (please confirm that the package which you are running on your laptop is the same on your msdb? - reload your SQL package from MSDB in BIDS/SSDT and recreate your source and destination components)
As your error message shows, "not enough memory available" (may be because of multicast) - Usually you can override this error by restarting SQL Server [not an optimal solution but it work & if that work it shows that your package fills
the memory - Keep an eye on task manager]
Make sure that your statics on table are updated [run EXEC sp_updatestastics]
Make sure your indexes are not de-fragmented [run rebuild indexes]
If you are dealing with many rows may be 40000 * 12 (because of multicast) = 4,800,000 rows the try to separate package.
Check your excel file format/column data type is correct
Check user permission who is running the job has required permission on folder/file.
Understand that sort is a blocking transformation and it requires all your data in memory before it sorts. so, if there are large number of rows then your complete memory will be occupied.
Difference between Visual Studio & BIDS/SSDT
Nothing much, other than BIDS runs on 32 bit while jobs on 64 bit (but there run time environment are configurable, though)
There shouldn't be any performance difference until your
package is on network location because transferring data to the network may slow the package. If package runs on SQL Server it uses SQL buffer pool to fetch data via SQL statement and then SSIS works on its own memory allotment.
Hope this will help you to understand and fix the issue.
Glad to help! Please remember to accept the answer if you found it helpful. It will be useful for future readers having same issue.

Suddenly started getting error: Unable to start program 'DTS' when try to execute SSIS Package

Me and my team member suddenly started getting following error when try to execute SSIS Package in SSDT (VS 2010)
I searched everywhere but virtually no information available about this Error. Anyone has suggestion on how to fix this error?
NOTE: Tried to execute package from command line and it works...
Error starting debugging.
ADDITIONAL INFORMATION:
Unable to start program 'DTS'.
Operation not supported. Unknown error: 0x80040038. (Microsoft Visual Studio Debugger)
Thanks,
Nayan
<a href="http://binaryworld.net/blogs"> Visit My Blog</a>

Hi Nayan,
According to your description, the SSIS package works fine when you execute it with command line, when you execute it in SSDT, you got the error message: Unable to start program 'DTS'.
To troubleshoot the problem, I would suggest you to upgrade SSDT to latest patch. Please refer to the following steps:
Download and install the latest Microsoft SQL Server Service Pack.
Cumulative Update package SQL Server Service Pack.
Download and install Microsoft Visual Studio 2010 Feature Pack 2.
For more information about Visual Studio 2010 Feature Packs, please refer to the following document:
https://msdn.microsoft.com/en-us/vstudio/ff655021.aspx
If the problem remain unresolved, i would appreciate it if you could give us detailed information about the error, it will help us move more quickly toward a solution.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.
Wendy Fu
TechNet Community Support

Revoke execute on packages from Public

Dear all.
I've got a doubt. I did the Oracle recommendations and on my Primary Database I revoke execute priviledge on the packges UTL_FILE, UTL_TCP, UTL_SMTP and UTL_HTTP using the command revoke execute on <package> from public.
I tryed to do the same on my Physical Standby Database but it wasn't possible. I got a message saying that the database isn't open. My question is: When I do the faiolver, will the physical standby database apply thoe changes I had made on the Primary?
Thanks a lot.

It will be applied to the standby by archive log recovery.
When I ran these "recommended" revokes I ended up with a broken database due to invalid objects, so make sure you compile invalid objects before and after the revoke, and compare counts to see if they have increased.

Execute SSIS Package from JOB which contains Execute Process Task calling a .bat file

Similar Messages

Maybe you are looking for