Executing a powershell script for checking duplicate users while creating a AD user throug ADUC console.
Hi,
I have a text file in which some SamAccountNames are present.I need to check the file while creating a new users through ADUC console.If a username that is going to create through ADUC console is present in the file, then it should prompt a message
that the user is already present in the text file.
Is there any possibility of contacting the powershell script from the ADUC console.If so, then while creating a new user through ADUC console, what is the proceedure for executing that powershell script.
please provide me the approriate solutions.
Thanks
Prasanthi k
Run the below Powershell Script for users are exist or not in AD. Later you can create the users.
#Find Users exist in AD or Not?
#Biswajit Biswas
$users = get-content c:\users.txt
foreach ($user in $users) {
$User = Get-ADUser -Filter {(samaccountname -eq $user)}
If ($user -eq $Null) {"User does not exist in AD ($user)" }
Else {"User found in AD ($user)"}
Active Directory Users attributes-Powershell
http://gallery.technet.microsoft.com/scriptcenter/Getting-Users-ALL-7417b71d
Regards~Biswajit
Disclaimer: This posting is provided & with no warranties or guarantees and confers no rights.
MCP 2003,MCSA 2003, MCSA:M 2003, CCNA, MCTS, Enterprise Admin
MY BLOG
Domain Controllers inventory-Quest Powershell
Generate Report for Bulk Servers-LastBootUpTime,SerialNumber,InstallDate
Generate a Report for installed Hotfix for Bulk Servers
Similar Messages
-
Powershell script for security groups and users for multiple share folders
Hi scripting team,
I need your help with powershell script for the below queries
1. List out the security groups for more than one server share path and output it to a file ( csv )
For eg.
If the are are two share paths
\\servername\foldermain\folder1
\\servername\foldermain\folder2
So I needs the list of security groups for each share path
And the output needs to be under each any every path.
2. Grab the users belongs to main security groups and it nested groups for more than one security group and listed the users under each and every group. No need to display nested groups. Just users belongs to main group and users under nested.
Your teams help is much appreciated
Thank you.
Thilochana kumararatneHi Braham,
Thanks for your quick reply.
Are we able to do this on two stage method
1. grab the security groups from the share paths
if can grab the share path from a separate txt file than copying it to the <your path> location
so i can modify the txt file
once run the script
if can the output like below to a CSV file
\\servername\foldermain\folder1group 1group 2group 3\\servername\foldermain\folder2group 1group 2group 3then i know which groups belongs to which share paththen i can remove the duplicate groups and keep the common groups to grab the users belongs to itso with the second script same as the first copy the security groups to a txt file and the out put as below.what I needs is the users full name and the samaccount name ( user id )group 1user1user2user3
group 2user1user2user3looking forward your help on thisThank you.Thilo -
An unknown error occurred while executing the PowerShell script:
Hello all,
Not the most descriptive title, granted. I'm hoping this may prompt the next version toprovide additional valuable content.
Kindly requesting any help on this problem. I'm running VMM 2012 R2 version 3.2.7668
When I try to look at properties of an existing Private Cloud, I get this error, only if I "look" at certain attributes. If I stay away from the specific attributes, everything is hunky dory. For reasons unknown, after I get this error, I have
to exit and go back into VMM in order to get anything else to run.
The text in the error dialogue box is not entirely applicable because I was connected to the VMM server and will connect again, when I exit/relaunch.
An unknown error occurred while executing the PowerShell script:
The connection to the VMM management server scvmm2.mmmmmm.com was lost.
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Try the operation again. If the issue persists, contact Microsoft Help and Support.
ID: 27235
This is what I get in Events
Warning 4/9/2015 3:27:04 PM PowerShell (Microsoft-Windows-PowerShell) 4100 Executing Pipeline
Log Name: Microsoft-Windows-PowerShell/Operational
Source: Microsoft-Windows-PowerShell
Date: 4/9/2015 3:27:04 PM
Event ID: 4100
Task Category: Executing Pipeline
Level: Warning
Keywords: None
User: mmmmmm\paufra
Computer: tools-francis.mmmmmm.com
Description:
Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Context:
Severity = Warning
Host Name = Default Host
Host Version = 4.0
Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
Engine Version = 4.0
Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
Pipeline ID = 16
Command Name = Get-SCReplicationGroup
Command Type = Cmdlet
Script Name =
Command Path =
Sequence Number = 91
User = mmmmmm\paufra
Shell ID = Microsoft.PowerShell
User Data:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-PowerShell" Guid="{A0C1853B-5C40-4B15-8766-3CF1C58F985A}" />
<EventID>4100</EventID>
<Version>1</Version>
<Level>3</Level>
<Task>106</Task>
<Opcode>19</Opcode>
<Keywords>0x0</Keywords>
<TimeCreated SystemTime="2015-04-09T22:27:04.993655700Z" />
<EventRecordID>285</EventRecordID>
<Correlation ActivityID="{48059811-1A63-41E1-9057-7498D0E4FC20}" />
<Execution ProcessID="2344" ThreadID="4076" />
<Channel>Microsoft-Windows-PowerShell/Operational</Channel>
<Computer>tools-francis.mmmmmm.com</Computer>
<Security UserID="S-1-5-21-4008432563-1984933819-4238309236-2721" />
</System>
<EventData>
<Data Name="ContextInfo"> Severity = Warning
Host Name = Default Host
Host Version = 4.0
Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
Engine Version = 4.0
Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
Pipeline ID = 16
Command Name = Get-SCReplicationGroup
Command Type = Cmdlet
Script Name =
Command Path =
Sequence Number = 91
User = mmmmmm\paufra
Shell ID = Microsoft.PowerShell
</Data>
<Data Name="UserData">
</Data>
<Data Name="Payload">Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
</Data>
</EventData>
</Event>Hi Sir,
First , please try to run the VMM configuration analyzer on that computer :
http://www.microsoft.com/en-us/download/details.aspx?id=41555
In addition , please try to use "VMMTrace" mentioned in following article to collect trace log and find some useful information :
http://blogs.technet.com/b/jonjor/archive/2011/01/07/vmmtrace-simplified-scvmm-tracing.aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] . -
Can we execute a Powershell script from the Javascript?
Hi,
I have a certain requirement to add a Custom ribbon button in document library and there was a powershell script to be run for the selected item in the library.
I have struck with executing a Powershell script from the javascript function.
Can anyone please suggest me if this was achievable
Thanks, Swaroop VuppalaHi Swaroop,
To execute server side code in a custom ribbon button script, using application page is a common way to do this, besides, you can also use a page dialog, which is similar with application page but display as model dialog, another way is javascript
_dopostback and delegate control, the following article contains detailed information about this, please refer to it for more information:
Invoke server side code on SharePoint ribbon click:
http://sharepointnadeem.blogspot.in/2012/07/invoke-server-side-code-on-sharepoint.html
Thanks,
Qiao Wei
TechNet Community Support -
Customize Alert messages for checking duplicate value and Success alert
Hi All,
I want to show two alert against the same "Submit" button to--
1. Alert messages for checking duplicate value and show the Duplicate value found alert and
2. Success Alert if the form is success to commit and no duplicate value found.
I did all thing but when alert-1 shows and i pressed the ok button of the alert then the second alert also shows which i don't want to show.
Which i can do in this issue? Have there anyone to help me!
ArifHi Manu,
I have placed the following code
1. against the Submit button--
if error_code=40508 then
commit_form;
elsif :USERDELETION.CANCELLATION_USERID is not null then
do_key('COMMIT_FORM');
else null;
end if;
2. Code against the key-commit trigger in the form level--
commit_form;
DECLARE
vAlert NUMBER;
BEGIN
set_alert_property('ALERT_TO_VERIFY',ALERT_MESSAGE_TEXT, 'Your Form has successfully submitted and your Reference id is '||:USERDELETION.REF_NO);
vAlert:=SHOW_ALERT('ALERT_TO_VERIFY');
END;
3. Code against the on-error trigger in the form level--
DECLARE
vAlert NUMBER;
BEGIN
if ERROR_CODE = 40508 then
set_alert_property('ERROR_ALERT',ALERT_MESSAGE_TEXT, 'This user deletion request has already submitted of the user named '||'"'||:USERDELETION.FULLNAME||'"');
vAlert:=SHOW_ALERT('ERROR_ALERT');
elsif
ERROR_CODE = 40202 then
set_alert_property('ERROR_ALERT',ALERT_MESSAGE_TEXT, 'Existing userid must be filled-up !');
vAlert:=SHOW_ALERT('ERROR_ALERT');
else
message(error_type||to_char(error_text)||': '||error_text);
end if;
END;
If there have any confusion, please ask me.
Arif -
Power Shell Script for Check Remote machinces are live or not
I have required a Power Shell Script for Check multiple Remote machines are live or not.Please guide me
This will do it.
http://gallery.technet.microsoft.com/Ping-IP-Adress-Range-d90ce82d
¯\_(ツ)_/¯ -
An Unexpected Error while creating a new user...
Hello everyone.
Recently a customer of ours received an error while creating a new user. I believe the page bombed out on him while he was creating the user and this is the error he received:
============================================================
Error opening /error.jsp.
The source of this error is javax.servlet.ServletException: Cannot find message resources under key org.apache.struts.action.MESSAGE at weblogic.servlet.jsp.PageContextImpl.handlePageException(PageContextImpl.java:323) at jsp_servlet.__error._jspService(error.jsp:17) at weblogic.servlet.jsp.JspBase.service(JspBase.java:33) at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1006) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:28) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:293) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.bea.wlw.netui.pageflow.PageFlowJspFilter.doFilter(PageFlowJspFilter.java:246) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.kichler.portal.servlet.RoleTimeoutFilter.doFilter(RoleTimeoutFilter.java:77) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.kichler.framework.persistence.hibernate.HibernateFilter.doFilter(HibernateFilter.java:22) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:644) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:423) at com.bea.wlw.netui.pageflow.scoping.internal.ScopedRequestDispatcher.include(ScopedRequestDispatcher.java:120) at com.bea.netuix.servlets.controls.content.JspContent.beginRender(JspContent.java:533) at com.bea.netuix.servlets.controls.content.NetuiContent.beginRender(NetuiContent.java:408) at com.bea.netuix.nf.ControlLifecycle$1.visit(ControlLifecycle.java:495) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:485) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:190) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:106) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:356) at com.bea.netuix.nf.UIControl.render(UIControl.java:512) at com.bea.netuix.servlets.controls.PresentationContext.render(PresentationContext.java:405) at com.bea.netuix.servlets.util.RenderToolkit.renderChild(RenderToolkit.java:123) at com.bea.netuix.servlets.jsp.taglib.RenderChild.doStartTag(RenderChild.java:58) at jsp_servlet._framework._skeletons._kichler.__adminpagelayout._jspService(adminpagelayout.jsp:15) at weblogic.servlet.jsp.JspBase.service(JspBase.java:33) at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1006) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:315) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:638) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:423) at com.bea.netuix.servlets.controls.JspRenderer.renderAlt(JspRenderer.java:194) at com.bea.netuix.servlets.controls.JspRenderer.beginRender(JspRenderer.java:96) at com.bea.netuix.nf.ControlLifecycle$1.visit(ControlLifecycle.java:491) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:485) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:190) at com.bea.netuix.nf.Lifecycle.runOutbound(Lifecycle.java:204) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:146) at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:321) at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:184) at com.bea.netuix.servlets.manager.PortalServlet.doPost(PortalServlet.java:767) at com.bea.netuix.servlets.manager.PortalServlet.doGet(PortalServlet.java:671) at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:135) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1006) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:28) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:293) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.kichler.portal.servlet.RoleTimeoutFilter.doFilter(RoleTimeoutFilter.java:77) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.kichler.framework.persistence.hibernate.HibernateFilter.doFilter(HibernateFilter.java:22) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6724) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121) at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3764) at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2644) at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219) at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
Caused by
javax.servlet.jsp.JspException: Cannot find message resources under key org.apache.struts.action.MESSAGE at org.apache.struts.util.RequestUtils.retrieveMessageResources(RequestUtils.java:1103) at org.apache.struts.util.RequestUtils.message(RequestUtils.java:1043) at org.apache.struts.taglib.bean.MessageTag.doStartTag(MessageTag.java:294) at jsp_servlet.__error._jspService(error.jsp:14) at weblogic.servlet.jsp.JspBase.service(JspBase.java:33) at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1006) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:28) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:293) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.bea.wlw.netui.pageflow.PageFlowJspFilter.doFilter(PageFlowJspFilter.java:246) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.kichler.portal.servlet.RoleTimeoutFilter.doFilter(RoleTimeoutFilter.java:77) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.kichler.framework.persistence.hibernate.HibernateFilter.doFilter(HibernateFilter.java:22) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:644) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:423) at com.bea.wlw.netui.pageflow.scoping.internal.ScopedRequestDispatcher.include(ScopedRequestDispatcher.java:120) at com.bea.netuix.servlets.controls.content.JspContent.beginRender(JspContent.java:533) at com.bea.netuix.servlets.controls.content.NetuiContent.beginRender(NetuiContent.java:408) at com.bea.netuix.nf.ControlLifecycle$1.visit(ControlLifecycle.java:495) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:485) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:190) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:106) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:356) at com.bea.netuix.nf.UIControl.render(UIControl.java:512) at com.bea.netuix.servlets.controls.PresentationContext.render(PresentationContext.java:405) at com.bea.netuix.servlets.util.RenderToolkit.renderChild(RenderToolkit.java:123) at com.bea.netuix.servlets.jsp.taglib.RenderChild.doStartTag(RenderChild.java:58) at jsp_servlet._framework._skeletons._kichler.__adminpagelayout._jspService(adminpagelayout.jsp:15) at weblogic.servlet.jsp.JspBase.service(JspBase.java:33) at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1006) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:315) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:638) at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:423) at com.bea.netuix.servlets.controls.JspRenderer.renderAlt(JspRenderer.java:194) at com.bea.netuix.servlets.controls.JspRenderer.beginRender(JspRenderer.java:96) at com.bea.netuix.nf.ControlLifecycle$1.visit(ControlLifecycle.java:491) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:485) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:496) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:190) at com.bea.netuix.nf.Lifecycle.runOutbound(Lifecycle.java:204) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:146) at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:321) at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:184) at com.bea.netuix.servlets.manager.PortalServlet.doPost(PortalServlet.java:767) at com.bea.netuix.servlets.manager.PortalServlet.doGet(PortalServlet.java:671) at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:135) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1006) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:28) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:293) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.kichler.portal.servlet.RoleTimeoutFilter.doFilter(RoleTimeoutFilter.java:77) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.kichler.framework.persistence.hibernate.HibernateFilter.doFilter(HibernateFilter.java:22) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6724) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121) at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3764) at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2644) at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219) at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
==========================================================
Here is the error that I have found in the logs.
==========================================================
####<Jan 26, 2006 10:49:40 AM EST> <Info> <Usermgmt> <clv1upw02> <DealerManaged2
> <ExecuteThread: '13' for queue: 'weblogic.kernel.Default'> <weblogic> <BEA1-1E
26AFA61CCE> <BEA-402301> <User [email protected] was created with prof
ileType null>
####<Jan 26, 2006 10:49:40 AM EST> <Error> <netuix> <clv1upw02> <DealerManaged2>
<ExecuteThread: '13' for queue: 'weblogic.kernel.Default'> <jerryk@unifiedsuppl
yinc.com> <> <BEA-423137> <There was an error loading the requested URI /error.j
sp.>
####<Jan 26, 2006 10:50:33 AM EST> <Error> <netuix> <clv1upw02> <DealerManaged2>
<ExecuteThread: '10' for queue: 'weblogic.kernel.Default'> <jerryk@unifiedsuppl
yinc.com> <> <BEA-423137> <There was an error loading the requested URI /error.j
sp.>
####<Jan 26, 2006 10:50:45 AM EST> <Error> <netuix> <clv1upw02> <DealerManaged2>
<ExecuteThread: '10' for queue: 'weblogic.kernel.Default'> <jerryk@unifiedsuppl
yinc.com> <> <BEA-423137> <There was an error loading the requested URI /error.j
sp.>
####<Jan 26, 2006 10:52:32 AM EST> <Error> <netuix> <clv1upw02> <DealerManaged2>
<ExecuteThread: '9' for queue: 'weblogic.kernel.Default'> <jerryk@unifiedsupply
inc.com> <> <BEA-423137> <There was an error loading the requested URI /error.js
p.>
####<Jan 26, 2006 10:52:53 AM EST> <Error> <netuix> <clv1upw02> <DealerManaged2>
<ExecuteThread: '9' for queue: 'weblogic.kernel.Default'> <jerryk@unifiedsupply
inc.com> <> <BEA-423137> <There was an error loading the requested URI /error.js
p.>
==========================================================
Now the weird thing is this. He got this error, and the user WAS STILL added to our user lists. This doesn't happen all the time, as in the logs he created a user minutes before this one and he did not receive any errors.
This is just something that we do not want to have happen. Does anyone have any idea of what may have caused this and what I can do to prevent this from happening again.
I cannot find any info on this BEA-423137 error anywhere on the site and I was wondering if someone would be able to help me out.
Thanks,
GarretNevermind everyone. I figured out that I can do a manual change and just add the user to one of the groups and everything should be ok. Something happened silently within the system that caused it.
-
Rollback segment Error coming for 8 lacks Record while creating MV
Hi All,
i am creating a materialized View and it gives us 8 lacks record but when we creates in production its fails due to rollback segment does not have enough space to handle it and it did not create the MV.
can anyone help me out to resolve this issue for the below query while creating MV.
SELECT DISTINCT NVL
((ROUND ((jt_date_completed - jt_date_requested) * 24, 2)
0
) AS actual_hrs_to_complete,
NVL ((ROUND ((jt_date_responded - jt_date_requested) * 24, 2)
0
) AS actual_hrs_to_respond,
peo1.peo_name AS agent_name,
peo1.peo_user_name AS asagent_soe_id,
le.lglent_desc AS ap_system,
' ' AS assign_work_request_comment,
DECODE (jt.jt_bill_id,
138802, 'CLIENT BILLABLE',
138803, 'CONTRACTED',
138804, 'INTERNAL BILLABLE',
NULL, ' '
) AS billable,
bl.bldg_name_cc AS building, bl.bldg_id_ls AS building_id,
DECODE (bl.bldg_active_cc,
'Y', 'ACTIVE',
'INACTIVE'
) AS building_status,
DECODE (jt.jt_wrk_cause_id,
141521, 'STANDARD WEAR AND TEAR',
141522, 'NEGLIGENCE',
141523, 'ACCIDENTAL',
141524, 'MECHANICAL MALFUNCTION',
141525, 'OVERSIGHT',
141526, 'VANDAL',
141527, 'STANDARD',
141528, 'PROJECT WORK',
6058229, 'TEST',
NULL, ' '
) AS cause_type,
' ' AS comments, peo3.peo_name AS completed_by,
jt.jt_requestor_email AS contact_email,
jt.jt_requestor_name_first
|| ' '
|| jt.jt_requestor_name_last AS contact_name,
jt.jt_requestor_phone AS contact_phone,
cc.cstctrcd_apcode AS corp_code,
cc.cstctrcd_code AS cost_center,
jt.jt_date_closed AS date_closed,
jt.jt_date_completed AS date_completed,
jt.jt_date_requested AS date_requested,
jt.jt_date_responded AS date_responded,
jt.jt_date_response_ecd AS date_response_ecd,
jt.jt_date_scheduled AS date_scheduled,
DECODE (jt.jt_def_id,
139949, 'WTG VENDOR RESPONSE',
139950, 'WAITING ON PARTS',
139951, 'LABOR AVAILABILITY',
139952, 'DEFERRED- HI PRI WORK',
139953, 'WTG APPROVAL',
139954, 'FUNDING REQUIRED',
139955, 'ACCESS DENIED',
139956, 'WTG MATERIAL',
NULL, ' '
) AS deferral_reason,
jt.jt_description AS description,
jt.jt_date_resched_ecd AS ecd,
fmg.facility_manager AS facility_manager,
fl.floors_text AS FLOOR, gl.genled_desc AS general_ledger,
' ' AS kiosk_date_requested, ' ' AS kiosk_dispatch_confirmed,
' ' AS kiosk_dispatched,
eqp.equip_customer_code AS linked_equipment_alias,
eqp.equip_id AS linked_equipment_id,
eqp.equip_text AS linked_equipment_name,
DECODE (jt_originator_type_id,
1000, 'PROJECT MOVE REQUEST',
138834, 'CUSTOMER INITIATED CORRECTION',
138835, 'CUSTOMER INITIATED REQUEST',
138836, 'CORRECTIVE MAINTENANCE',
138837, 'CONFERENCE ROOM BOOKING',
138838, 'PROJECT INITIATED REQUEST',
138839, 'PLANNED PREVENTIVE MAINTENANCE',
138840, 'SELF INITATED REQUEST',
NULL, ' '
) AS originator_type,
' ' AS payment_terms, priority_text AS priority_code,
swoty.sworktype_text AS problem_type,
prop.property_name_cc AS property,
jt.jt_cost_quote_total AS quote_total,
par.levels_name AS region,
DECODE (jt.jt_repdef_id,
141534, 'ADJUSTED SETTING',
141535, 'TRAINING FOR END',
141536, 'NEW REQUEST',
141537, 'NO REPAIR REQUIR',
141538, 'REPLACED PARTS',
141539, 'REPLACE EQUIPMEN',
1000699, 'NEW REQUEST',
NULL, ' '
) AS repair_definitions,
jt.jt_repairdesc AS repair_description,
jt.jt_requestor AS requestor, ' ' AS requestor_cost_center,
jt.jt_requestor_email AS requestor_email,
jt.jt_requestor_name_first AS requestor_name,
jt.jt_requestor_phone AS requestor_phone,
' ' AS response_time, rm.room_name_cc AS room,
p1.peo_provider_code1 AS service_provider,
p1.peo_address_1 AS service_provider_address,
peocity.city_text service_provider_city,
p1.peo_provider_code1 AS service_provider_code,
peocity.city_country_name AS service_provider_country,
peocur.currency_text AS service_provider_currency,
p1.peo_name AS service_provider_description,
p1.peo_dispatch_method AS serv_prov_dispatc_hmethod,
p1.peo_rate_double AS serv_prov_double_time_rate,
p1.peo_email AS service_provider_email,
p1.peo_emergency_phone AS serv_prov_emergency_phone,
p1.peo_fax AS service_provider_fax_number,
p1.peo_home_phone AS service_provider_home_phone,
p1.peo_rate_hourly AS service_provider_hourly_rate,
p1.peo_title AS service_provider_job_title,
p1.peo_method_id AS service_provider_method,
p1.peo_cell_phone AS service_provider_mobile_phone,
p1.peo_pager AS service_provider_pager,
p1.peo_rate_differential AS service_provider_rates,
p1.peo_rate_differential AS ser_prov_shift_differential,
peocity.city_state_prov_text AS serv_prov_state_province,
DECODE (p1.peo_active,
'Y', 'ACTIVE',
'INACTIVE'
) AS service_provider_status,
p1.peo_url AS serv_prov_web_site_address,
p1.peo_phone AS service_provider_work_phone,
p1.peo_postal_code AS serv_prov_zip_postal_code, ' ' AS shift,
' ' AS skill,
DECODE (jt.jt_bigstatus_id,
138813, 'NEW',
138814, 'PENDING',
138815, 'OPEN',
138816, 'COMPLETED',
138817, 'CLOSED',
138818, 'CANCELLED',
NULL, ' '
) AS status,
lev.levels_name AS subregion, ' ' AS trade,
p1.peo_ls_interface_code1 AS vendor_id,
p1.peo_fax AS vendor_purchasing_fax,
p1.peo_vendor_site_code AS vendor_sitecode,
jt.jt_id AS vendor_ticket, p1.peo_name AS vendor_companyname,
jt.jt_requestor_vip AS vip, wo.wo_id AS work_order_no,
jt.jt_id AS work_request,
jt.jt_class_id AS work_request_class,
woty.worktype_text AS work_type, ' ' AS wr_cost,
jt.jt_description AS wr_description,
' ' AS wr_dispatch_method,
DECODE (jt.jt_bigstatus_id,
138813, 'NEW',
138814, 'PENDING',
138815, 'OPEN',
138816, 'COMPLETED',
138817, 'CLOSED',
138818, 'CANCELLED',
NULL, ' '
) AS wr_status,
ctry.country_name AS country
FROM citi.jobticket jt,
citi.property prop,
citi.bldg bl,
citi.bldg_levels bldglvl,
citi.LEVELS lev,
citi.LEVELS par,
(SELECT crstools.stragg (peo_name) facility_manager,
bldgcon_bldg_id
FROM citi.bldg_contacts, citi.people
WHERE bldgcon_peo_id = peo_id
AND bldgcon_contype_id IN (40181, 10142)
GROUP BY bldgcon_bldg_id) fmg,
citi.floors fl,
citi.room rm,
citi.general_ledger gl,
citi.legal_entity le,
citi.cost_center_codes cc,
citi.equipment eqp,
citi.worktype woty,
citi.subworktype swoty,
citi.work_order wo,
citi.jt_workers jtwo,
citi.priority,
citi.country ctry,
citi.people p1,
citi.people peo3,
citi.people peo1,
citi.city peocity,
citi.currency peocur
WHERE jt.jt_bldg_id = bl.bldg_id
AND bl.bldg_id = bldglvl.bldg_levels_bldg_id
AND bldglvl.bldg_levels_levels_id = lev.levels_id
AND lev.levels_parent = par.levels_id(+)
AND prop.property_id = bl.bldg_property_id
AND bl.bldg_active_ls <> 'N'
AND jt.jt_floors_id = fl.floors_id(+)
AND jt.jt_room_id = rm.room_id(+)
AND jt.jt_bldg_id = fmg.bldgcon_bldg_id(+)
AND jt.jt_genled_id = gl.genled_id(+)
AND gl.genled_lglent_id = le.lglent_id(+)
AND jt.jt_cstctrcd_id = cc.cstctrcd_id(+)
AND jt.jt_equip_id = eqp.equip_id(+)
AND jt.jt_id = jtwo.jtw_jt_id(+)
AND jt.jt_worktype_id = woty.worktype_id(+)
AND jt.jt_sworktype_id = swoty.sworktype_id(+)
AND jt.jt_wo_id = wo.wo_id
AND jt.jt_priority_id = priority_id(+)
AND jt.jt_date_requested >= ADD_MONTHS (SYSDATE, -12)
AND bl.bldg_country_id = ctry.country_id
AND jtwo.jtw_peo_id = p1.peo_id(+)
AND p1.peo_city_id = peocity.city_id(+)
AND jt.jt_completed_by_peo_id = peo3.peo_id(+)
AND p1.peo_rate_currency_id = peocur.currency_id(+)
AND jt.jt_agent_peo_id = peo1.peo_id(+);
Regards
shyam~Hi,
Its ora-1555? IS your undo_retention sufficient?
Since you are developer the only option you have is to tune the query?
Am curious to know like I create materialized view so that I do not have to run complex query on the master database / or to prevent the access to master database more than once to get the same data?
Like to know which is your case because your query seem to be too complex to be the case for former. Do you think this materialized view would be used frequently in your application?
Regards
Anurag Tibrewal. -
SharePoint 2010 Powershell scripting for user profile
Please help to have a powershell script which will provide the details related to user profile service application like:
Number of user profiles:
Number of user properties
Number of Organization properties
Number of Organization profiles
Number of Audiences
Un compiled Audiences
Audience Compilation status
Last compilation time
Synchronization schedule
Santosh sethiHi,
If you're looking for prewritten scripts, you can check these two places:
http://gallery.technet.microsoft.com/scriptcenter
http://get-spscripts.com/
You should read this too:
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/a0def745-4831-4de0-a040-63b63e7be7ae/posting-guidelines?forum=ITCG
Let us know if you have any specific questions.
Don't retire TechNet! -
(Don't give up yet - 12,830+ strong and growing) -
Unix script for checking the user account status
Hi All,
i have created one unix script to check the status of the user in diff databases.
#!/bin/ksh
useracctreport.txt if [ ! -f hh ];
then
echo "Database file does not exist"
fi
echo "Enter Username"
read USER
echo "Enter the password"
stty -echo
read PASS
stty echo
for j in `cat users`
do
j="`echo $j| tr '[a-z]' '[A-Z]'`"
for i in `cat hh`
do
sqlplus -s $USER/$PASS\@$i <<EOF >> useracctreport.txt
column USERNAME format a8
column ACCOUNT_STATUS format a5
!echo "*****User $j Status in $i DB*****"
select USERNAME,ACCOUNT_STATUS from dba_users where username=('$j');
select OBJECT_TYPE,count(*) from dba_objects where owner='$j' group by object_type;
EOF
done
done
In log file ,i get the below error when its unable to connect to the DB.
SP2-0306: Invalid option.
Usage: CONN[ECT] [logon] [AS {SYSDBA|SYSOPER}] | [INTERNAL]
where <logon> ::= <username>[<password>][@<connect_string>] | /
SP2-0306: Invalid option.
Usage: CONN[ECT] [logon] [AS {SYSDBA|SYSOPER}] | [INTERNAL]
where <logon> ::= <username>[<password>][@<connect_string>] | /
SP2-0157: unable to CONNECT to ORACLE after 3 attempts, exiting SQL*Plus
ERROR:
ORA-01017: invalid username/password; logon denied
Is there any way i can supress this error?
and is there any other way i can make this script faster.Thanks a lot for your helpHi,
The failing line is
sqlplus -s $USER/$PASS\@$i <<EOF >> useracctreport.txtYou should test the connect statement you provide to sqlplus. For example:
CONSTRING=$USER/$PASS\@$i
echo Connect string used: $CONSTRING
sqlplus -s $CONSTRING <<EOF >> useracctreport.txtCheck the echoed value. It's malformed. Correct it appropriately.
Yoann. -
Executable or batch script for end users to export mailbox to PST
We are in the process of taking over a small firm and proceeding with manual migration of mailboxes from this firm , currently we do not have full access to their environment and having a hard time depending on admins of their organization dealing over
to exporting mailboxes and then importing them back to our exchange environment, my idea is to rather provide a executable or batch script to user's of their organization get their mailboxes exported out directly from end users so that we do not
have to depend on remote organization's admins for every single user out there . is there a batch script or some executable code that end users can run to have their mailbox exported out directly ?
Aditya MedirattaSeems like, this informative article would be a good approach to resolve your concern :
http://www.msexchange.org/articles-tutorials/exchange-server-2013/management-administration/managing-pst-import-export-process-exchange-server-2013-part2.html
Moreover if you wish, you may also give a shot to this automated solution (http://www.exchangemailboxtopst.org/) in order to accomplish this job in more easier and quicker way. -
Powershell script for removing some users from a particular Site Collection
Hi,
I am looking for a PowerShell script to delete a few users from a particular Site Collection. I am unable to delete them from/_catalogs/Users/simple.aspx page therefore need some other medium to
delete users from the site collection.
My ultimate aim is to have no user profile with "tp_deleted" field's value as 0 in the USERINFO table. Currently there are about 40 odd users with this field's value as 0 and this is affecting my crawling of this content database.Thanks for the reply Alex & eHaze,
I have a content source of root site which crawls all the site collections under it. Out of the 9 site collections, only 8 are getting crawled and 1 doesn't get crawled at all. The error in the crawl logs is
The SharePoint item being crawled returned an error when requesting data from the web service. ( Error from SharePoint site: Value does not fall within the expected range. )
I tried a lot of things, searched over the net and finally found
this which helped me solve the same issue in my development environment. I deleted these users from userInfo table and ran a full crawl. And the issue was fixed.
Now since I cannot delete the users from userInfo table directly from PROD environment, I used .../_catalogs/Users/simple.aspx list
to delete users from this site collection. While some of the users I could delete, quite a few I could not. Clicking on the profile redirected me to the home page rather than the info page of the profile.
This
is why I have to delete these users from the site collection.
Alex - the link you shared, I guess it is for a web application level.
eHaze - the script you shared throws this error:
Get-SPSite : Cannot find an SPSite object with Id or Url: http://dev-apps/divisions/BT. At C:\PowerShell Scripts\DeleteUserFromSiteCollection1.ps1:4 char:19
+ $site = get-spsite <<<< $siteURL
+ CategoryInfo : InvalidData: (Microsoft.Share...SPCmdletGetSite:
SPCmdletGetSite) [Get-SPSite], SPCmdletPipeBindException
+ FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletGetSite
You cannot call a method on a null-valued expression.
At C:\PowerShell Scripts\DeleteUserFromSiteCollection1.ps1:9 char:27
+ $site.SiteUsers.Remove <<<< ($LoginName)
+ CategoryInfo : InvalidOperation: (Remove:String) [], RuntimeExc
eption
+ FullyQualifiedErrorId : InvokeMethodOnNull
hope this info helps. -
Hi there,
On my SharePoint site - some places (Sites/Lists etc) have given permissions to "NT Authority\All Authenticated Users"
We need to remove these permissions and instead give permissions to "Forest1\Domain Users" and "Forest1\Domain Users"
PowerSHell script to do above will be appreciated.
Thank you so much.Hello,
In order to check whether "NT Authority\All Authenticated Users" are present in your site use this reference - Link
Remove permission script reference - Link
Finally grant permission script reference - link
Kindly mark it as answer if it helps you.
-Hatim -
Our network was hit recently with virus previously unknown, O97M.Crigent. It is a nasty Macro virus that targets Microsoft Office Documents & Spreadsheets and uses a combination of Macros and Scripts via Powershell.
How do I disable PowerShell scripting via Group Policy?
Will this raise any issues such as random application or network failures or other issues?
Can I apply it to the entire domain or should I be selective and only apply it to the workstations?
Network Summary: Windows 2008 Active Directoy Server, 75% Windows 7, 25% Windows XP workstations.
DouglasOfSanMarcosDisabling Windows PowerShell can be done with GPO:
Computer Configuration | Administrative Templates | Windows Components | Windows PowerShell
From GPO Description: "This setting exists under both "Computer Configuration" and "User Configuration" in the group policy editor. The "Computer Configuration" has precedence over "User Configuration."
By default this option is restricted any way on computers.
I would be very selective when apply it at all:
Workstations - I would apply to test group of workstations first, just to see that there are no side effects before applying to all computers.
Server - I wouldn't apply it at all. I have seen too many issues when setting this policy on Exchange and other systems.
If you are using a Group Policy to define a PowerShell logon, logoff or computer script, that script will disregard any execution policy set locally or through a GPO.
http://4sysops.com/archives/set-powershell-execution-policy-with-group-policy/
http://technet.microsoft.com/en-us/library/hh849812.aspx
Please take a moment to Vote as Helpful and/or Mark as Answer where applicable. Thanks. -
PowerShell script for AD name change
I need to change all users logon name in AD to their first name.last name Server 2003
Here is my suggestion of a PowerShell V1 script to rename all users (sAMAccountName):
# Filter on all users that have givenName and sn assigned.
$searcher=[adsisearcher]'(&(objectCategory=person)(objectClass=user)(givenName=*)(sn=*))'
[void]$searcher.PropertiesToLoad.Add('distinguishedName')
[void]$searcher.PropertiesToLoad.Add('sAMAccountName')
[void]$searcher.PropertiesToLoad.Add('givenName')
[void]$searcher.PropertiesToLoad.Add('sn')
$searcher.PageSize
= 200
$Results =
$searcher.FindAll()
ForEach ($Result
In $Results)
# Retrieve values.
$DN
= $Result.Properties.Item("distinguishedName")
$NTName
= $Result.Properties.Item("sAMAccountName")
$First
= $Result.Properties.Item("givenName")
$Last
= $Result.Properties.Item("sn")
# Construct desired "pre-Windows 2000 logon" name.
$NewName
= "$First.Last"
# Make sure new name 20 characters or less.
If ($NewName.Length
-gt 20)
# I don't know how to trim $First in PowerShell to make $NewName 20 characters.
# Check if name should be updated (case insensitive).
If ($NTName
-ine $NewName)
# Trap possible error.
Trap
"Unable to rename user $DN to $NewName"
"Error description: $_"
Continue
# Bind to user object in AD.
$User
= [ADSI]"LDAP://$DN"
# Assign new name.
$User.sAMAccountName
= $NewName
# Save the change to AD.
$User.SetInfo()
Test first, by commenting out the SetInfo() statement and echo $DN and $NewName for all users. Note that the script could trim $First to limit $First.$Last to 20 characters, but I could not find a way to do this. Also, this script does nothing to prevent
duplicate sAMAccountName values, but the possible error will echo to the screen.
Richard Mueller - MVP Directory Services
Maybe you are looking for
-
hi, may i know if dunning run F150 can result in dunning block? if the maximum dunning already executed yet payment still not done, may i know where is the configuration that can make it blocked. i tried ova8 but still not able to block. need advice.
-
IPhone4 Battery life: The report you all have been waiting for!!!
Hello fellow iPhoners, I'm a proud owner of an iPhone4 who have been getting sporadic battery performance for a little while. One day I can get 5 to 6 hours of usage while another the phone can barely make it past 4 hours doing the same things. There
-
Profit Center not picked in Payment documents
The problem concerns incoming payment with clearing invoices, in the same time, the profit center is not taken automatically from invoice to payment document. How can the same be achieved.
-
I can't register my payment card for my Apple ID
My mother has purchased an iPad but Apple keeps declining her payment card. On contacting the bank she has been told that Apple have charged £48 but she has been unable to purchase anything through her iPad Can anyone help?
-
Hello, We are developping an application with matrix using VB6 SP4. We use "Component Works 2.0.1" of National Instrument in order to use matrix functions. So, in a Form we have added the component CWMatrix (rename CWMatrix1). We use it to make some