Executing a sequence of mappings

Hello
I dont have a workflow schema or repository installed in my development server.
It is there in production server.
But i want to execute a sequence of mappings in development server
How can I do that?? Can it be done through SQLPLUS??
If yes.. how????
-Nikita

Nikita,
Do you mean to say that you are not Deploying Process Flows on your development box first?
Are you developing, validating on dev, and then deploying on the Production box?
Or, is it that you have a separate Workflow Server on the production box, and you got onto OWB only recently.
Anyway, you can ask a DBA to install Oracle Workflow 2.6 (OWB 9.2.x) into a schema (owf_mgr) onto your dev box/instance.
Then you can configure a new DAD (WFL_DAD_db) on the Oracle Apache server running on the dev box to see the Workflow in Action.
Quite simple. Just follow the docs. Let us know if you need more information.
- Jojo
- Jojo

Similar Messages

Error in execute planning sequence variant in process chain

Hi ,
While creating an Execute planning sequence variant in process chain in Quality system , i am getting an error" variable variant not selected ' though i created a variable variant and selected it in execute planning seq variant.
Transporting it from development system didnt work therefore i am trying to create it directly in Quality .
Any idea what could be the issue.

Hi,
Variable variant can be saved for planning sequence in modeler and then cab be used in process chains.
In process chain you can choose "Execute planning sequence"( separate process type) and add planning sequence with variant.
[http://help.sap.com/saphelp_nw2004s/helpdata/en/43/1d000c41130bd5e10000000a422035/frameset.htm]
Thanks
Pratyush

Error Task Sequence Manager failed to execute task sequence. Code 0x80004005 TSManager

Dear All,
I need your Help, as I am getting below mention error in deployment of OS through MDT 2013.
Expand a string: WinPEandFullOS   TSManager   6/5/2014 11:40:50 AM   1464 (0x05B8)
Executing command line: cscript.exe "%SCRIPTROOT%\LTIApply.wsf"   TSManager   6/5/2014 11:40:50 AM   1464 (0x05B8)
Process completed with exit code 5627   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
!--------------------------------------------------------------------------------------------!   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Failed to run the action: Install Operating System.
Unknown error (Error: 000015FB; Source: Unknown)   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Sending status message . . .   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Executing in non SMS standalone mode. Ignoring send a task execution status message request   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Set a global environment variable _SMSTSLastActionRetCode=5627   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Set a global environment variable _SMSTSLastActionSucceeded=false   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Clear local default environment   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Let the parent group (Install) decides whether to continue execution   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
The execution of the group (Install) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows)   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Failed to run the last action: Install Operating System. Execution of task sequence failed.
Unknown error (Error: 000015FB; Source: Unknown)   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Sending status message . . .   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Executing in non SMS standalone mode. Ignoring send a task execution status message request   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Execution::enExecutionFail != m_eExecutionResult, HRESULT=80004005 (e:\nts_sms_fre\sms\client\tasksequence\tsmanager\tsmanager.cpp,767)   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Task Sequence Engine failed! Code: enExecutionFail   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
****************************************************************************   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Task sequence execution failed with error code 80004005   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Cleaning Up. Removing Authenticator   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Cleaning up task sequence folder   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
DeleteFileW(sVolumeIDFile.c_str()), HRESULT=80070002 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,508)   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
DeleteFileW(sVolumeIDFile.c_str()), HRESULT=80070002 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,508)   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Successfully unregistered Task Sequencing Environment COM Interface.   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Command line for extension .exe is "%1" %*   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Set command line: "X:\Deploy\Tools\X86\TsProgressUI.exe" /Unregister   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Executing command line: "X:\Deploy\Tools\X86\TsProgressUI.exe" /Unregister   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
==========[ TsProgressUI started in process 320 ]==========   TsProgressUI   6/5/2014 11:51:18 AM   552 (0x0228)
Command line: "X:\Deploy\Tools\X86\TsProgressUI.exe" /Unregister   TsProgressUI   6/5/2014 11:51:18 AM   552 (0x0228)
Unregistering COM classes   TsProgressUI   6/5/2014 11:51:18 AM   552 (0x0228)
Unregistering class objects   TsProgressUI   6/5/2014 11:51:18 AM   552 (0x0228)
Shutdown complete.   TsProgressUI   6/5/2014 11:51:18 AM   552 (0x0228)
Process completed with exit code 0   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Successfully unregistered TS Progress UI.   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
g_TSManager.Run(), HRESULT=80004005 (e:\nts_sms_fre\sms\client\tasksequence\tsmanager\tsmanager.cpp,657)   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Error Task Sequence Manager failed to execute task sequence. Code 0x80004005   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Sending error status message   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
In non SMS staqndalone mode.Ignoring SendStatusMessage request   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Finalizing logging from process 1456   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Finalizing logs to root of first available drive   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Successfully finalized logs to C:\SMSTSLog   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Cleaning up task sequencing logging configuration.   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Deployment is going failed.
Regards
Sachi

Note：Only mass storage device drivers and network adapter device drivers should be added to boot images because other types of
drivers are not needed and will increase the size of the boot image:
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Minimum VisualC++ source code to execute a sequence

Hello,
I need to make a small applet that will call TestStand sequence.
It has to initialize engine, run sequence, exit and return exit code of error or success.
No user interaction is needed/wanted. So I dont want to compile file with MFC or ATL libraries.
Theoreticaly I can initialize and run COM object even from console application, but in practice - I'm not sure, which interfaces should I call.
Maybe it should start like:
CoInitialize(NULL); // Init COM
IEnginePtr pEngine (__uuidof(TS::Engine), NULL, CLSCTX_ALL); // get the pointer to interface
pEngine->PutUIMessageMinDelay(0); // do some calls
pEngine->LoadTypePaletteFiles();
CoUninitialize(); // Unitializing COM
Is it a rig
ht/possible way to do it?
Will I get some problems later if I will use such method?
Thank you!

You can discern the minimal code required to execute a sequence from the "SimpleMFCOperatorInterface" in your \Examples\OperatorInterfaces\Simple MFC directory. You are correct in that you do not have to use MFC or ATL in order to load the TestStand engine and execute a sequence, the only requirements are as follows (as well as the general process flow of loading the engine and executing a sequence):
1) Initialize the COM library with OleInitialize()
2) Create an instance of the TS engine with TS::IEnginePtr CreateInstance()
3) Register your UIMessageCallback function with TS::IEngine RegisterUIMessageCallback(). Your UIMessageCallback function should have a structure similar to this:
void __cdecl UIMessageCallback(struct IDispatch *UIMessageDisp)
TS::UIMessagePtr uimsg = UIMessageDisp;
TS:equenceContextPtr seqcontext;
int hr;
seqcontext = uimsg->Thread->GetSequenceContext(0,NULL);
switch((int)uimsg->Event)
case 0:
break;
case 8:
hr = seqcontext->Engine->ShutDown(VARIANT_FALSE);
break;
case 9:
hr = seqcontext->Engine->ShutDown(VARIANT_TRUE);
quit = true;
break;
default:
break;
return;
NOTE: You must handle the "EndExecution" and "ShutdownComplete" UIMessages (eventcodes 8 and 9 respectively) at a minimum in order to properly execute a sequence and shutdown the engine when it is complete.
4) Get a sequence file reference with TS::IEngine GetSequenceFile() (note: you can use the TS::IEngine DisplayOpenFileDialog() method to select a file path with)
5) Start the execution with TS::IEngine NewExecution()
NOTE: That the above UIMessageCallback message handler waits for the "ShutdownComplete" message to set a flag variable named "quit" to true to signify to the rest of the application that the sequence has finished executing.
If you take a look at the source files for the SimpleMFCOperatorInterface, you can see how each of these methods are used.
Jason F.
Applications Engineer
National Instruments
www.ni.com/ask

BI IP Executing planning sequence via process chain not possible

Hi,
we use BI IP and have defined a process chain (RSPC) with value type process planning sequence. When we execute it, we get error message
"Inconsistent input parameter (parameter: <unknown>, value <unknown>)"
When we execute this planning sequence via the modeller or via SE38 RSPLS_PLSEQ_EXECUTE everything works fine. I thougt the cause could be the user of the job itself (job is executed with different user, and variant of planning sequence is user-dependent!), but I changed the user in the job itself as well without results.
any thoughts?
regards
D
null

Hi,
I executed with my user and have a SAP_ALL authorization. Perhaps it could be because we use authorisation with the old method (4.0) (-> I'm not sure on this). I also think it has to do with authorization. I'll check this out with our authorization consultant.
D

How to send data to labview code at run time while using with (or executing the sequence)the teststand

Hello
I am new to the Teststand.
I am using labview8.0 with teststand 3.1
I have developed some labview codemodules as vi's without using the teststand utility library pallete
Now i have to run them in teststand.
While executing them(as a sequence) in teststand,i need to enter the data to the labview code at run time.For this labview front panel should appear as GUI or popup (while executing).Is it possible to do this without using teststand pallete.
or i need to change the code with teststand pallete(i think it is difficult now to change the code)
Plz provide a solution to this problem
Also one more,how and where to use the 'pass by reference' option
Thanks and Regards
Mudigondla

Hi,
see your other post http://forums.ni.com/ni/board/message?board.id=330&message.id=13914
Also, you can, specify to display the front panel of your VI when you specify your VI in your sequence file.
There are examples, for dialog panel using LabVIEW, in the examples folder of TestStand and on the NI Web Site.
Regards
Ray Farmer
Regards
Ray Farmer

Execute a sequence container based on logic

i have 3 sequence containers in a SSIS package
one has to be executed every 30 days
one has to be executed every 7 days
one has to be executed 2 days
this particular package has to be scheduled using sql server agent
now how do i write my logic in such a way that only a certain sequence container has to be executed based on the execution dates and do not touch the other sequence containers
can somebody throw some light on this
Thanks

Use the Precedence Constraints that will be driven by an expression that is based on dates
https://www.simple-talk.com/sql/ssis/working-with-precedence-constraints-in-sql-server-integration-services/
Arthur
MyBlog
Twitter

How to execute a sequence from cvi code ?

Hello ,
I'm programing a test software using Labwindows CVI 9.0 and TestStand 4.2 .
I'm Using CVI GUI and i want for example to press a button that will lanuch a squence from Teststand .
the SEQ file is already open because i'm launching the GUI from Teststand .
How can i execute a seq from CVI ?
Thank you for your help.... Kobi
Kobi Kalif
Software Engineer

Refer to the Example User Interfaces section in Chapter 9, Creating Custom User Interfaces, of the TestStand Reference Manual (p. 9-1):
Example User Interfaces
The <TestStand>\UserInterfaces directory includes the executable, project, and source code files for each example user interface. The Full-Featured subdirectory contains user interfaces for loading, viewing, editing, saving, executing, and debugging sequence files. The Simple subdirectory contains similar but limited user interfaces with fewer commands and options but no menus. Also, the simple example user interfaces display the steps for executions you run but do not display steps for sequences you load. Both subdirectories contain source code for LabVIEW, LabWindows/CVI, Microsoft Visual Basic .NET, C#, and C++ (MFC).TestStand installs the source code files for the default user interfaces in the <TestStand>\UserInterfaces and <TestStand Public>\UserInterfaces directories. To modify the installed user interfaces or to create new user interfaces, modify the files in the <TestStand Public>\UserInterfaces directory. You can use the read-only source files for the default user interfaces in the <TestStand>\ UserInterfaces directory as a reference. When you modify installed files, rename the files after you modify them if you want to create a separate custom component. You do not have to rename the files after you modify them if you only want to modify the behavior of an existing component. If you do not rename the files and you use the files in a future version of TestStand, changes National Instruments makes to the component might not be compatible with the modified version of the component. Storing new and customized files in the <TestStand Public> directory ensures that new installations of the same version of TestStand do not overwrite the customizations and ensures that uninstalling TestStand does not remove the files you customize.
Note: National Instruments recommends that you track the changes you make to the user interface source code files so you can integrate the changes with any enhancements in future versions of the TestStand User Interfaces.
You might also find the Example Programs topic in the NI TestStand Help useful for other tasks.

How to execute a sequence without using an User Interface

Hi,
I have programatically generated a TestStand Sequence File. I used C# and the TestStand API. I opened the .seq file in the default TestStand User Interface and the Sequence File runs perfectly.
However, when I created a NewExecution using the Engine object created in the porgram, it seems that the sequence never starts execution. Please look at the following code snippet:
// TSStep and TSSequence was created before
TSSequence.InsertStep(TSStep, 0, StepGroups.StepGroup_Main); SequenceFile TSSequenceFile = TSEngine.NewSequenceFile();
TSSequenceFile.InsertSequenceEx(0, TSSequence);
TSSequenceFile.Save("SeqGen.seq"); Execution TSExecution = TSEngine.NewExecution(TSSequenceFile, "Seq_0", null, false, ExecutionTypeMask.ExecTypeMask_Normal, System.Type.Missing, System.Type.Missing, System.Type.Missing);while (TSSequenceFile.IsExecuting == true) ; // this flag never changes to false
TSEngine.ReleaseSequenceFileEx(TSSequenceFile, 0);
I know the sequence is not being executed because a COM Server (written as a Local Server in a .EXE) should start when the step within the sequence be executed.
Any ideas why the sequence is not executing properly ?
PacSoft

Hi Pacsoft,
Check out this example,
I posted it in a former thread.
Note: Also downloaded the .seq from the former thread! NEVER acept savings to Ni. -INI files !!!
Greetings
juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=
Attachments:
ConsoleApplication2.zip ‏55 KB

How to convert Test Executive 4 sequence file to TestStand 3.0 or 3.1?

Is there any way to convert Test Executive 4.0 sequence file into TestStand 3.0 or 3.1 format? I found a converter vi here, but it only takes the file made with TE/LV 5.0 or later. Thanks.

I'd ask NI very nicely for a free loan of the newer test executive! As it's only for converting to TestStand and TestExec is now a museum piece, they'll probably let you borrow it. Or they may even do it for you.
Might be worth speaking to your NI rep - presumably he's had a few lobster lunches from the commission from your sales.
Otherwise - re-write your sequences. This might be quicker anyway, depending on the length of your sequences.

Re: Executing Planning Sequence using java script.

Hi All,
Can anyone tell me how to execute a planning sequence using a java script.
Regards.
Shafi.

Hi Deepti,
i have written a java script which will display the error message from IP in a Pop up window.
For this to work the java script function needs to be called once the planning sequence is done with execution.
I didn't find ways to do it based on the WAD commands.
hence i thought i can run the planning sequence in the same java script that i have written.
Can you help me based on the inpus ihave given ?
Regards.
Shafi.

Possible avoid log message in STS when execute a sequence?

Hi experts,
I have one question for you. It is possible in STS avoid the log message when a planning sequence is executed in a status switch.
Thanks in advance for your help,
Best Regards,
Silvia

HI Malini,
Run the Queries induvidually in rsrt and suppress the messages in it.
Thne try to run the work Book.
Hope this solves the issue.
Regards.
Shafi.

Can we force queries to execute in Sequence?

Hello all,
We are at BOXI 3.1/SP2 version. One of our complex webi reports has data from multiple queries ( They are all from the same universe, so same data connection. It's an OLAP universe).
I have this question
1. When i click "Run Queries" - do all the queries get sent to the database the same time or is there a sequence that is followed? Can we enforce a sequence?
2. Similarly if i schedule this report - is it possible to enforce a sequence for execution of these queries?
Thanks in advance.

Hi Dave,
I need to provide more details to elucidate upon my issue
1. Our queries are a bit intensive, so when i refresh the single report, i actually see say all 10 huge MDX queries ( multiple queries within a single report) hitting the cube the same time, and causing a general impact in performance.
My ideal scenario would be to some-how control BO to fire one query..get results and so..on and then collate all that data and present it in the report.
I hope this clarifies.

Execute any Sequence

Is there a possbility to run any sequence from a sequencefile? The following Method doesn't work:
Engine.NewExecution(sequenceFile, "Sequence1", modelfile, false, 0, null, null, null);
Is the only way to create Execution Entrypoints in Processmodel?

Hi,
Its should do providing you dont run with a process model file.
Engine.NewExecution(sequenceFile, "Sequence1", null, false, 0, null, null, null);
Regards
Ray Farmer
Regards
Ray Farmer

Results from Executing Sequence in VB

I�m trying to control the TestStand engine from
Visual Basic. I�m using the Automation Server
interface rather than the ActiveX control because
ultimately I want to be able to interface with it
from script running in a web browser.
The problem I'm having is that I can execute a
sequence file but I can't get any meaningful
results out of it. For example the ResultStatus
property of each step in a sequence is blank.
However, when I run the same file in the sample
VB Test Operator program everything seems to work.
I guess it's probably because I'm not handling
the engine's UIMessageHandler properly.
The relevant code is as follows:
Set moTS = New TS.Engine 'using as Automation
Server
'Get a sequence file
Set moSequenceFile = moTS.GetSequenceFile
("c:\program
files\teststand\tutorial\sample2.seq")
'Get the main sequence
Set oSequence = moSequenceFile.GetSequence(0)
SequenceName = oSequence.Name
'Enable polling for UIMessages
moTS.UIMessagePollingEnabled = True
Timer1.Enabled = True
'Start an execution on this sequence, bypassing
the Proces model
Set moExecution = moTS.NewExecution
(moSequenceFile, SequenceName, Nothing, False,
ExecTypeMask_Normal)
'In UIMessage Handler code
Dim UIMsgCode As TS.UIMessageCodes
If Not moTS Is Nothing Then
If moTS.IsUIMessageQueueEmpty Then
Set moUIMsg = moTS.GetUIMessage
UIMsgCode = moUIMsg.Event
Select Case UIMsgCode
Case UIMsg_StartExecution
Case UIMsg_EndExecution
Debug.Print "Num Threads = " &
moExecution.NumThreads
Debug.Print "Execution Status = "
& moExecution.ResultStatus
'Print info about the steps
Set moSequenceFile =
moExecution.GetSequenceFile
Set oSequence =
moSequenceFile.GetSequence(0)
NumSteps = oSequence.GetNumSteps
(StepGroup_Main)
For i = 0 To NumSteps - 1
Set oStep = oSequence.GetStep
(i, StepGroup_Main)
Debug.Print "Name = " &
oStep.Name
Debug.Print "Description = "
& oStep.Description
Debug.Print "Result Status
= " & oStep.ResultStatus 'This is empty
Next
Debug.Print "Report = " &
moExecution.Report.All 'This is empty
Set oSequence = Nothing
Set moThread = Nothing
Timer1.Enabled = False
Case UIMsg_BreakOnUserRequest
Case UIMsg_BreakOnBreakpoint
'etc.
End Select
Set moUIMsg = Nothing
End If
End If
Sent via Deja.com http://www.deja.com/
Before you buy.

Hi Paul,
Thanks for the examples web reference. The simple VB example will be
useful as there's less stuff to wade through! Plus, I'll probably also
eventually need to refer to the C++ examples.
Re: the current problem, I had in the meantime solved it on my own. I'd
done what you say below, but the critical thing I missed was defining
the sequence context object.
Kevin
In article <[email protected]>,
"Paul Mueller" wrote:
>
> Kevin,
>
> You'll need to use a timer callback or some asynchronous technique to
poll
> for UIMessages. Furthermore, you need to release the UIMessage
before TestStand
> will continue with the execution. The execution pauses while you are
handling
> the UIMessage. And the execution continues only when you release the
UIMessage
> (or set it to Nothing).
>
> THere is a Simple VB Operator Interface example on the web at
www.ni.com/support/epd/
>
> Hope this helps,
> Paul
>
> [email protected] wrote:
> >I�m trying to control the TestStand engine from>Visual Basic. I�m
using
> the Automation Server>interface rather than the ActiveX control
because>ultimately
> I want to be able to interface with it>from script running in a web
browser.>>The
> problem I'm having is that I can execute a>sequence file but I can't
get
> any meaningful>results out of it. For example the
ResultStatus>property of
> each step in a sequence is blank.>However, when I run the same file
in the
> sample>VB Test Operator program everything seems to work.>>I guess
it's probably
> because I'm not handling>the engine's UIMessageHandler properly.>>The
relevant
> code is as follows>>Set moTS = New TS.Engine 'using as
Automation>Server>>'Get
> a sequence file>Set moSequenceFile = moTS.GetSequenceFile>
("c:\program>files\teststand\tutorial\sample2.seq")>>'Get
> the main sequence>Set oSequence = moSequenceFile.GetSequence(0)
>SequenceName
> = oSequence.Name>>'Enable polling for
UIMessages>moTS.UIMessagePollingEnabled
> = True>Timer1.Enabled = True>>'Start an execution on this sequence,
bypassing>the
> Proces model>Set moExecution = moTS.NewExecution>(moSequenceFile,
SequenceName,
> Nothing, False,>ExecTypeMask_Normal)>>'In UIMessage Handler code>>Dim
UIMsgCode
> As TS.UIMessageCodes>>If Not moTS Is Nothing Then>> If
moTS.IsUIMessageQueueEmpty
> Then>> Set moUIMsg = moTS.GetUIMessage>> UIMsgCode =
moUIMsg.Event>>
> Select Case UIMsgCode> Case
UIMsg_StartExecution>
> Case UIMsg_EndExecution>> Debug.Print "Num
Threads =
> " &>moExecution.NumThreads> Debug.Print "Execution
Status
> = ">& moExecution.ResultStatus>> 'Print info about the
steps>
> Set moSequenceFile
=>moExecution.GetSequenceFile>
> Set oSequence =>moSequenceFile.GetSequence(0)>>
NumSteps
> = oSequence.GetNumSteps>(StepGroup_Main)>> For i = 0
To NumSteps
> - 1> Set oStep = oSequence.GetStep>(i,
StepGroup_Main)>
> Debug.Print "Name = "
&>oStep.Name>
> Debug.Print "Description = ">& oStep.Description>
Debug.Print
> "Result Status>= " & oStep.ResultStatus 'This is
empty> Next>>
> Debug.Print "Report = " &>moExecution.Report.All 'This
is
> empty> Set oSequence = Nothing> Set
moThread
> = Nothing>> Timer1.Enabled = False>> Case
UIMsg_BreakOnUserRequest>
> Case UIMsg_BreakOnBreakpoint> 'etc.>>
End Select>>
> Set moUIMsg = Nothing>> End If>End If>>>Sent via Deja.com
http://www.deja.com/>Before
> you buy.
>
Sent via Deja.com http://www.deja.com/
Before you buy.

Executing a sequence of mappings

Similar Messages

Maybe you are looking for