Executing Code with true/false input
Ok so I must be over thinking on how to do this. I am trying to run a section of my code when I recieve a True value. When False I do not want it to do anything. Ive tried using a true/false case structure but the requirement to hook the false case to something is screwing me. Also tried a while loop but it just latches on and never reads the false after its already on.
Solved!
Go to Solution.
joedirt wrote:
Okay and I will check out tutorials. I just did all that silly code because I wanted to take the last element of the array and write it to the spreadsheet without adding other values, BUT at the same time enable it to append to file because Ill repeat this code over.
You don't have an array until you make one right there out of a single element. There are no "other values". There is one element in the array, which is the first and the last element and exactly same as the value you used to build the array. Once you do the tutorials, you'll laught about your code. It is absolutely pointless.
LabVIEW Champion . Do more with less code and in less time .
Similar Messages
-
Building a case structure with four boolean (true/false) inputs.
I currently have two boolean inputs that I would like to use to select cases in a case structure. I would like to have four cases, each one dependent on the true/false condtions of the two booleans. If boolean 1 =true, then case 1 should be used, if boolean 2=true, then case 2 should be used, etc.
What structure should I use to convert these boolean inputs into numeric cases?Or build them in to an array and "Search 1d Array". If you are only looking for a single bool being true, this would be easier because your cases could be {0,1,2,3} instead of {1,2,4,8}
-
When I go into any website to make a purchase, when I click on continue to go to the next window, nothing happens. I wexploreron't go any further. I get a long list of numbers and letters with true false true in a banner at the bottom of screen. I have tried to click on the banner but disappears when I go to put the arrow on it.
This all started when I was on a government website, hit back arrow, and lost the site. Ever since, I have not been able to conduct any business on Firefox and have to resort to using Explorer to do my business. Explore works but not FireFox.
Thank you!Is that what the page displayed?
Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache and
* Remove Cookies '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
Type '''about:preferences'''<Enter> in the address bar.
* '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
* '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences'''<Enter> in the address bar
Select '''Advanced > General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart. -
Scalar conversion to true/false
I would like to convert a time-varying scalar to a true/false variable. To clarify, I would like to take a time-varying scalar and pass the value of the zeroeth bit to a true/false variable which can then be passed to a digital line output device. The DO device has solid-state relays and its DAQmx driver requires a true/false input and does NOT permit a scalar nor digital signal. It seems to me that this is a very simple c-language intrinsic function call.
I have looked at the SE Steps-Anaylze-Analog-Formula functions but they always output another scalar. The Trigger step outputs a true/false momentarily and does not latch. Limit Test has a true/false output but that is for all samples in aggregate of the scalar and not any one scalar value.
Any suggestions? or better yet, can someone post a simple LV vi which does this simple data conversion? Is there some utility vi hidden on the installation disk somewhere that can do this?
Thanks
Solved!
Go to Solution.The scalar is simply that which SignalExpress creates and stores as output from many different "Steps". It seems to me that all scalars in SignalExpress are REAL data type and 32 bits. For my purpose I need to move the value of bit Zero (0) to a variable that SignalExpress sees as data type True/False (boolean) which can be input to a DAQmx step which takes only that boolean data type. This is a rare case as very few DAQmx drivers demand a boolean and only a boolean as input. Since such DAQmx drivers do exist then it seems to me that SignalExpress should accomodate them by providing bit manipulation and conversion functions as found in "C" libraries. This should be very easy to add to SE???
Thank you for asking. -
ORA-27369: job of type EXECUTABLE failed with exit code: Key has expired
Hi
I defined the following Job on Linux Redhat 5.4 & Oracle DB 10.2.0.4:
BEGIN
dbms_scheduler.create_job(job_name => 'expjob',
job_type => 'executable',
job_action => '/EXPORT/scott_cmd',
enabled => TRUE,
auto_drop => FALSE);
END;
drwxrwxrwx 2 oracle oinstall 4096 Jul 10 19:19 EXPORTwhere:
/home/oracle>cat /EXPORT/scott_cmd
#!/bin/sh
exp parfile=./scott.par
/home/oracle>cat /EXPORT/scott.par
FILE=scott.dmp
USERID=STRMADMIN/STRMADMIN
OWNER=SCOTT
LOG=scott.log
/home/oracle>ls -l /EXPORT/scott_cmd
-rwxr-xr-x 1 oracle oinstall 34 Jul 10 19:16 /EXPORT/scott_cmd
/home/oracle>ls -l /u01/app/oracle/OraHome_1/rdbms/admin/externaljob.ora
-rw-r--r-- 1 root oinstall 1575 Jul 10 18:42 /u01/app/oracle/OraHome_1/rdbms/admin/externaljob.ora
(run_user = nobody
run_group = nobody)
/home/oracle>ls -l /u01/app/oracle/OraHome_1/bin/extjob
-rwsr-x--- 1 root oinstall 64842 Jul 8 14:21 /u01/app/oracle/OraHome_1/bin/extjob
/home/oracle>ls -l /u01/app/oracle/OraHome_1/bin/extjobo
-rwxr-xr-x 1 oracle oinstall 64842 Jul 8 14:21 /u01/app/oracle/OraHome_1/bin/extjoboWhen I executed as user STRMADMIN ( has DBA & CREATE JOB Privileg) the Job, I got always the error:
/EXPORT>sqlplus STRMADMIN/STRMADMIN
SQL*Plus: Release 10.2.0.4.0 - Production on Sun Jul 10 19:40:24 2011
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> exec dbms_scheduler.run_job('expjob');
BEGIN dbms_scheduler.run_job('expjob'); END;
ERROR at line 1:
ORA-27369: job of type EXECUTABLE failed with exit code: Key has expired
ORA-06512: at "SYS.DBMS_ISCHED", line 150
ORA-06512: at "SYS.DBMS_SCHEDULER", line 441
ORA-06512: at line 1
SQL>Please, help
regards
hqt200475
Edited by: hqt200475 on Jul 10, 2011 10:04 AM
Edited by: hqt200475 on Jul 10, 2011 10:05 AMHi Ronald,
I need the external Job in the 10.2.0.4-Environment because of the Online-Upgrade of a 10.2.0.4-Database to 11.2.0.2 with STREAMS. I want to start the old export from a PL/SQL-Procedure.
Now returning to my problem:
First: Change the run user to oracle:oinstall $ORACLE_HOME/rdbms/admin/externaljob.ora
# This configuration file is used by dbms_scheduler when executing external
# (operating system) jobs. It contains the user and group to run external
# jobs as. It must only be writable by the owner and must be owned by root.
# If extjob is not setuid then the only allowable run_user
# is the user Oracle runs as and the only allowable run_group is the group
# Oracle runs as.
#run_user = nobody
#run_group = nobody
run_user = oracle
run_group = oinstallsecond:
/EXPORT>cat scott_cmd
#!/bin/sh
ORACLE_SID=STB;export ORACLE_SID
ORACLE_HOME=/u01/app/oracle/OraHome_1;export ORACLE_HOME
PATH=$ORACLE_HOME/bin:$ORACLE_HOME/opmn/bin:$PATH; export PATH
LD_LIBRARY_PATH=$ORACLE_HOME/lib;export LD_LIBRARY_PATH
/u01/app/oracle/OraHome_1/bin/exp parfile=/EXPORT/scott.parand:
BEGIN
dbms_scheduler.create_job(job_name => 'expjob_r',
job_type => 'executable',
job_action => '/EXPORT/scott_cmd',
enabled => TRUE,
auto_drop => FALSE);
END;
/The manual execution of export as user oracle/oinstall was unproblematic, But I still got the error when running the following procedure :
SQL> exec dbms_scheduler.run_job('expjob_r');
BEGIN dbms_scheduler.run_job('expjob_r'); END;
ERROR at line 1:
ORA-27369: job of type EXECUTABLE failed with exit code: Operation not
permitted
ORA-06512: at "SYS.DBMS_ISCHED", line 150
ORA-06512: at "SYS.DBMS_SCHEDULER", line 441
ORA-06512: at line 1regards
hqt200475 -
ORA-27369: job of type EXECUTABLE failed with exit code: Permission denied
Guy's
I am getting the same error
my schema is having dba priveleges.
CREATE OR REPLACE procedure abc_1 as
begin
dbms_scheduler.create_job(
job_name=>'test_1',
job_type=>'executable',
job_action=>'/d02/oradata/shell_scripts/import_db_1.sh',
enabled=>false,
auto_drop=>true );
end;
CREATE OR REPLACE procedure abc_2 as
--http://www.dba-oracle.com/t_dbms_scheduler_examples.htm
--http://www.oradev.com/dbms_scheduler.jsp
--http://forums.oracle.com/forums/thread.jspa?messageID=1352558�
begin
dbms_scheduler.run_job (job_name=>'test_1');
end;
SQL>
SQL>
SQL> exec abc_1
PL/SQL procedure successfully completed.
SQL> exec abc_2
BEGIN abc_2; END;
ERROR at line 1:
ORA-27369: job of type EXECUTABLE failed with exit code: Permission denied
ORA-06512: at "SYS.DBMS_ISCHED", line 150
ORA-06512: at "SYS.DBMS_SCHEDULER", line 441
ORA-06512: at "SYS.ABC_2", line 6
ORA-06512: at line 1
any one got the solution.pl pass it.
TIA,Hi,
If rdbms/admin/externaljob.ora exists (in 10.2.0.3 and up) then external jobs run as the user and group specified in this file which should be nobody by default.
If it does not exist (in releases prior to 10.2.0.3) then external jobs run as the owner of bin/extjob which should be nobody by default.
Because external jobs run as a lowly privileged user (nobody) by default, you need to make sure that this user can execute your script. Things to check for include
1) Use full paths to all binaries or scripts in job_action or program_action as well as calls inside the script.
2) Make sure all scripts start with #!/bin/sh or another command interpreter
3) Make sure all scripts have the executable bit set and are executable by the user that external jobs run as
4) Make sure that all required environment variables are set. External jobs by default do not have any environment variables set. For example, for an oracle import or export or sqlloader script you may need to set oracle_home, oracle_sid, ld_library_path and path environment variables in your script or source the required Oracle environment script.
Hope this helps,
Ravi. -
ORA-27369: job of type EXECUTABLE failed with exit code: 274662
I am trying to run a shell script through dbms_scheduler. The Shell scripts calls the oracle procedure which insert a record to the Debug table.
Code for generating the script
declare
begin
dbms_scheduler.create_job(
job_name=>'test_call_unix'
,job_type=>'executable'
,job_action=>'/carsd/Input/Current/BAM/calling_proc.sh'
,start_date => SYSDATE
,repeat_interval => 'FREQ=SECONDLY; INTERVAL=1'
,enabled=>TRUE
,auto_drop => TRUE
,comments=> 'Calling unxi sh'
end;
the shell script (calling_proc.sh)
touch called.log
sqlplus $ORA_USER/$ORA_PWD@$ORA_HOST << EOF1
exec p1_sh;
exit;
EOF1
I gave chmod 777 calling_proc.sh
this the error which i got in ALL_SCHEDULER_JOB_RUN_DETAILS table
ORA-27369: job of type EXECUTABLE failed with exit code: 274662
STANDARD_ERROR="Oracle Scheduler error: Config file is not owned by root or is writable by group or other or extjob is not setuid and owned by root"
Thanks in advance
Jeeva.STANDARD_ERROR="Oracle Scheduler error: Config file is not owned by root or is writable by group or other or extjob is not setuid and owned by root"
I gave chmod 777 calling_proc.sh
comply with top line message! -
ORA-27369: job of type EXECUTABLE failed with exit code: Is a name file
I am getting this error when I try to execute a file using /bin/sh , I create the file, do a chmod on the file and remove the file but I am have trouble executing it even though I can execute it form the command line.
ORA-27369: job of type EXECUTABLE failed with exit code: Is a name file
STANDARD_ERROR="Segmentation Fault"
139
EXTERNAL_LOG_ID="job_77927_1275",
ORA-27369: job of type EXECUTABLE failed with exit code: Transport endpoint is n
ot connected
STANDARD_ERROR="Abort - core dumped
here is the code
DBMS_SCHEDULER.CREATE_JOB(job_name=>'CHMOD_ON_CCL',
job_type=>'EXECUTABLE',
job_action=>'/bin/chmod',
number_of_arguments=>2,
enabled=>false,
auto_drop=>true);
DBMS_SCHEDULER.set_attribute('CHMOD_ON_CCL', 'credential_name', 'SCHED_USER');
DBMS_SCHEDULER.SET_JOB_ARGUMENT_VALUE(job_name=>'CHMOD_ON_CCL',
argument_position=>1,
argument_value=>'777');
DBMS_SCHEDULER.SET_JOB_ARGUMENT_VALUE(job_name=>'CHMOD_ON_CCL',
argument_position=>2,
argument_value=>l_directory || '/' || loc_file_name);
DBMS_SCHEDULER.ENABLE('CHMOD_ON_CCL');
--execute the CCL file, this will run the scheduler
DBMS_SCHEDULER.CREATE_JOB(job_name=>'EXECUTE_CCL',
job_type=>'EXECUTABLE',
job_action=>'/bin/sh',
number_of_arguments=>1,
enabled=>false,
auto_drop=>true);
DBMS_SCHEDULER.set_attribute('EXECUTE_CCL', 'credential_name', 'SCHED_USER');
DBMS_SCHEDULER.SET_JOB_ARGUMENT_VALUE(job_name=>'EXECUTE_CCL',
argument_position=>1,
argument_value=>l_directory || '/' || loc_file_name);
DBMS_SCHEDULER.ENABLE('EXECUTE_CCL');
--remove CCL file after scheudler runs
DBMS_SCHEDULER.CREATE_JOB(job_name=>'REMOVE_CCL',
job_type=>'EXECUTABLE',
job_action=>'/bin/rm',
number_of_arguments=>1,
enabled=>false,
auto_drop=>true);
DBMS_SCHEDULER.set_attribute('REMOVE_CCL', 'credential_name', 'SCHED_USER');
DBMS_SCHEDULER.SET_JOB_ARGUMENT_VALUE(job_name=>'REMOVE_CCL',
argument_position=>1,
argument_value=>l_directory || '/' || loc_file_name);
DBMS_SCHEDULER.ENABLE('REMOVE_CCL');
"No problem at all, you can do the same by getting the output from env and unset the variables that are defined there manually. Start with
unset PATH
unset ORACLE_HOME
unset LD_LIBRATY_PATH
ad start your script again from this environment. The scheduler launches the jobs in an environment where hardly any variable is defined.
R. -
Adf valueChangeListener autosubmit=true, execute code after update model
Hello.
I'm working with the valueChangeListener and autosubmit="true". I'll try to explain my situation
with an example.
jsp:
<af:form>
<af:panelForm>
<af:inputText
id="value1"
label="Value1"
value="#{index.myObject.value1}"
autoSubmit="true"
valueChangeListener="#{index.changeListener1}"/>
<af:inputText
id="value2"
label="Value2"
value="#{index.myObject.value2}"/>
</af:panelForm>
</af:form>
backing:
public class Index {
private MyObject myObject;
public Index() {
myObject = new MyObject();
public void changeListener1(ValueChangeEvent valueChangeEvent){
doSomethingWithMyObject(myObject);
// ... get/set of myObject
MyObject:
public class MyObject {
private String value1;
private String value2;
public MyObject() {}
//getters/setters...
}In the line doSomethingWithMyObject(myObject) i need myObject with the actual values in the user form.
in the example above, the first time the page is rendered and shows the inputs
if the user captures something in the 1st input and then hits the tab to go to the other input
the valueChangeEvent is fired, and the code in "index.changeListener1" executed, but at this moment
the model (myObject) hasn't been updated with the data that the user entered (Validation Phase).
So i need a way to execute my code called from the "valueChangeEvent" but after the model has been updated
Some notes about my problem:
- The doSomethingWithMyObject(myObject) could update data in myObject
- About binding="#{x.y}":
I know i can use the binding attribute in the tag <af:inputText binding="#{x.y}"> and then in the code of
the changelistener the binded component always have the most recent value from the user,
but i cant' use that, the method needs a MyObject instance.
- I don't think create a new instance of MyObject and populate it every time the event fires is a good way
- doSomethingWithMyObject" is a black box, so i don't know what is going to do with myObject
- In my problem there are more than 2 inputs there will be N components M listeners.
What I'm trying:
PhaseListener:
I have been implementing a solution with a PhaseListener like
public void afterPhase(PhaseEvent phaseEvent) {
// just after UPDATE_MODEL_VALUES phase
FacesContext f = FacesContext.getCurrentInstance();
Index i = (Index) f.getApplication().createValueBinding("#{index}").getValue(f);
// at this point the model is updated
doSomethingWithMyObject(i.getMyObject);
public PhaseId getPhaseId() {
return PhaseId.UPDATE_MODEL_VALUES;
this works but i don't know if this is the answer according to this post (unanswered at this time):
http://forums.oracle.com/forums/thread.jspa?threadID=611643
says something about that PhaseListener is not thread safe and blocks the application with more
than 1 user.
A wrapper:
using the controls binded to the backing
public class Index {
private MyObject myObject;
private CoreInputText inputValue1;
private CoreInputText inputValue2;
//listener
//getters/setters
} make a wraper like
public class MyObjectW {
private Index index; // wrap the backing index
public MyObjectW(Index index) {
this.index = index;
public String getValue1(){
return (String) index.getInputValue1().getValue();
public String getValue2(){
return (String) index.getInputValue2().getValue();
public void setValue1(Object v){
index.getInputValue1().setValue(v);
public void setValue2(Object v){
index.getInputValue2().setValue(v);
}and then call in the index backing:
doSomethingWithMyObject( new MyObjectW(this)); so it will access to the most actual values from user at the valueChangeEvent
But i really would like some way to execute my code called from the "valueChangeEvent" but after the model has been updated
so i dont need to wrap or implement PhaseListener
what do you think, what do you suggest, have any solution or a way to do what I'm trying?
thank you for your help...
Message was edited by:
akanewstedHello Frank, thanks for the response.
When you say
"If you need an updated object in this listener then you can update it from the value change listener as well"
you mean i can update the object by myself with the value from getNewValue()? or is there another way
to call to update the models at this time ?
I know i have the methods "getOldValue()" and "getNewValue()" in the "ValueChangeEvent" but what if i need
the actual value from the user in other control than the one that fires the event
example
Two inputs:
in the input1 the user enters some data
in the input2 when some data is entered it fires valueChangeListener (autosubmit=true)
in that case what if i need the value the user just entered in the input1 in the valueChangeListener of
the input2.
In general the app I'm working must do:
dynamically generate the controls in the form (inputs, selects etc)
Attach the control values to a model ( <af:inputText value=#{model.x}"/>
sometimes execute some script when a value change in a control (valueChangeListener)
those scripts uses the model (and needs to be an updated model)
script = " if (value2 = 'xyz') then value1='abc'; return true;";
if the model is not updated
the script will use old values and will be wrong
or if the script change some value in the model, when the update model phase occurs the value from
the script is lost.
that's why i need to work directly with the model and not the values in the ValueChangeEvent
Is there a way to use something like an action in the change of a control value?
that way the code will execute in the invoke application phase, can this be done ?
how i can execute code in the invoke application when a valueChangeEvent occurs ?
hope this help to explain more my situation.
Thank you for your help and time. -
ORA-27369: job of type EXECUTABLE failed with exit code: 255
I created a job in the DBMS_SCHEDULER with the following code -
BEGIN
DBMS_SCHEDULER.CREATE_JOB (
job_name => 'POSPAY_CHECK_JOB',
job_type => 'EXECUTABLE',
job_action => '/dev/POSPAY_USC2_CHECK.sh',
auto_drop => FALSE,
enabled => TRUE);
END;
/ When I tried to run the job, I got this error -
"ORA-27369: job of type EXECUTABLE failed with exit code: 255 STANDARD_ERROR="execve: No such file or directory""After reviewing the job in the dba_scheduler_jobs view, I noticed that ENABLE = FALSE. When I ran the code to enable it, it STILL remained FALSE.
BEGIN
DBMS_SCHEDULER.ENABLE('POSPAY_CHECK_JOB');
END;
/ Can someone please let me know why the new job will not run?
Why can't I ENABLE it?
Thanks!Additional Info - Here is the data for the POSPAY_CHECK_JOB from the DBA_SCHEDULER_JOBS view -
select * from sys.dba_scheduler_jobs where job_name like 'POSPAY_CHECK_JOB';
OWNER APPS
JOB_NAME POSPAY_CHECK_JOB
JOB_SUBNAME
JOB_CREATOR APPS
CLIENT_ID
GLOBAL_UID
PROGRAM_OWNER
PROGRAM_NAME
JOB_TYPE EXECUTABLE
JOB_ACTION /dev/POSPAY_USC2_CHECK.sh
NUMBER_OF_ARGUMENTS 0
SCHEDULE_TYPE IMMEDIATE
JOB_CLASS DEFAULT_JOB_CLASS
ENABLED FALSE
AUTO_DROP FALSE
RESTARTABLE FALSE
JOB_PRIORITY 3
RUN_COUNT 1
FAILURE_COUNT 1
RETRY_COUNT 0
LAST_START_DATE 19-NOV-09 10.16.34.502747000 AM -06:00
LAST_RUN_DURATION 0 0:0:0.55307000
LOGGING_LEVEL RUNS
STOP_ON_WINDOW_CLOSE FALSE
INSTANCE_STICKINESS TRUE
JOB_WEIGHT 1
NLS_ENV NLS_LANGUAGE='AMERICAN' NLS_TERRITORY='AMERICA' NLS_CURRENCY='$' NLS_ISO_CURRENCY='AMERICA' NLS_NUMERIC_CHARACTERS='.,' NLS_CALENDAR='GREGORIAN' NLS_DATE_FORMAT='DD-MON-RR' NLS_DATE_LANGUAGE='AMERICAN' NLS_SORT='BINARY' NLS_TIME_FORMAT='HH.MI.SSXFF AM' NLS_TIMESTAMP_FORMAT='DD-MON-RR HH.MI.SSXFF AM' NLS_TIME_TZ_FORMAT='HH.MI.SSXFF AM TZR' NLS_TIMESTAMP_TZ_FORMAT='DD-MON-RR HH.MI.SSXFF AM TZR' NLS_DUAL_CURRENCY='$' NLS_COMP='BINARY' NLS_LENGTH_SEMANTICS='BYTE' NLS_NCHAR_CONV_EXCP='FALSE'
FLAGS 2146384 -
ORA-27369: job of type EXECUTABLE failed with exit code: Not owner
Hi
I created a backup RAC database job using DBMS_SCHEDULER under RMANTEST schema (a DBA account) and I got the error as subject.
begin
dbms_scheduler.create_job(
job_name => 'scheduler_backup',
job_type => 'EXECUTABLE',
number_of_arguments => 2,
job_action => '/opt/oracle/admin/bin/rman_fullbackup_RAC_TEST_test.sh',
comments => 'backup via scheduler'
dbms_scheduler.SET_JOB_ARGUMENT_VALUE('scheduler_backup', 1, 'TEST');
dbms_scheduler.SET_JOB_ARGUMENT_VALUE('scheduler_backup', 2, 'TEST2');
dbms_scheduler.enable('scheduler_backup');
end;
Thanks,
KevinHi Ravi
Thanks for your input.
"ORA-27369: job of type EXECUTABLE failed with exit code: Not owner" is what I copied from ADDITIONAL_INFO of USER_SCHEDULER_JOB_RUB_DETAILS.
One thing I don't understand of your words is that
"On 10gR1 and 10gR2 you can redirect the stdout/stderr within your script and take a look at those log files."
In my script, I have log files but I cannot see it. I guess the job fails directly without hitting the redirection line in the script. Do you mean I shall write something like this
dbms_scheduler.create_job (
job_action => '/opt/oracle/admin/bin/backup.sh > backup.log'
Another one is
"make sure that the user that external jobs run as must be able to run your script"
But OS user and database user are two different accounts at different level.
I am using 10.2.0.2 RAC. The Unix script runs successfully every night. I just want to take advantage of DBMS_SCHEDULER to avoid host dependency.
Thanks,
Kevin -
ORA-27369: job of type EXECUTABLE failed with exit code: Incorrect function
Hello,
I am calling a windows bat file using dbms_scheduler and getting the following error. I have searched the forum and the internet and tried different switches and options. None of them solved my problem.
Oracle Version: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
OracleJobScheduler is running as a service
Error starting at line 1 in command:
execute GET_RESULTS();
Error report:
ORA-27369: job of type EXECUTABLE failed with exit code: Incorrect function.
ORA-06512: at "SYS.DBMS_ISCHED", line 185
ORA-06512: at "SYS.DBMS_SCHEDULER", line 486
ORA-06512: at "PS.GET_RESULTS", line 67
ORA-06512: at line 1
27369. 00000 - "job of type EXECUTABLE failed with exit code: %s"
*Cause: A problem was encountered while running a job of type EXECUTABLE.
The cause of the actual problem is identified by the exit code.
*Action: Correct the cause of the exit code and reschedule the job.
Here is the code for scheduler
dbms_output.put_line(os_commandline || utlPath || fileSeparator || 'get.bat >nul')
dbms_scheduler.create_job
( job_name =>'PS_GET_RESULTS'
, job_action => os_commandline || utlPath || fileSeparator || 'get.bat >nul'
, job_type =>'executable'
, enabled =>false
, auto_drop =>false
, start_date =>systimestamp
dbms_scheduler.run_job(job_name =>'PS_GET_RESULTS');The dbs_output prints a line which shows that the parameters os_commandline, utlPath and fileSeparator are set correctly.
C:\windows\system32\cmd.exe /q /c E:\UTLDir\get.bat >nulThe windows file (get.bat) is:
"C:\Program Files (x86)\WinSCP\Winscp.exe" /script=e:\utldir\get_resultsThis batch file passes a script file to the executable winscp.exe to get files from another server.
The script file (get_results) is:
option batch abort
option confirm off
open sftp://username:password@ipnumber:port -hostkey="ssh-rsa 1024 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
cd /usr/dropbox/
option transfer binary
get *.results E:\UTLDir\Results\
close
exitI tested the batch file directly and works fine and "gets" the files from the server. But, invoking from Oracle dbms_scheduler fails with ORA-27369: job of type EXECUTABLE failed with exit code: Incorrect function.
Appreciate your help and time in suggesting additional guidelines or pointers.
Thanks,
RoseHere is an update, if somebody else is having a similar problem.
The ftp command "cd" to change the directories should be an absolute path. I was given a path "/usr/dropbox/", but on the server it actually corresponds to "/usr/local/apps/dropbox/". After updating the directory path, the scheduler worked fine in invoking the batch file for transferring the files.
Thanks,
Rose -
ORA-27369: job of type EXECUTABLE failed with exit code:Operation notpermit
I am getting this error
ORA-27369: job of type EXECUTABLE failed with exit code: Operation not permitted.
We have been using this for such a long time without any problems.this is the plsql scheduler :
Please help
BEGIN
SYS.DBMS_SCHEDULER.CREATE_JOB
job_name => 'PROD_LOAD_SL_FILES'
,start_date => TO_TIMESTAMP_TZ('2005/12/02 17:05:00.000000 -05:00','yyyy/mm/dd hh24:mi:ss.ff tzh:tzm')
,repeat_interval => NULL
,end_date => NULL
,job_class => 'DEFAULT_JOB_CLASS'
,job_type => 'EXECUTABLE'
,job_action => '/home/oracle/actual/payment_files/slc_prod/load_sl_files.sh'
,comments => 'Loads SL files, uploads logs to database and sends email to Disbursement and DBA teams'
SYS.DBMS_SCHEDULER.SET_ATTRIBUTE
( name => 'PROD_LOAD_SL_FILES'
,attribute => 'RESTARTABLE'
,value => FALSE);
SYS.DBMS_SCHEDULER.SET_ATTRIBUTE
( name => 'PROD_LOAD_SL_FILES'
,attribute => 'LOGGING_LEVEL'
,value => SYS.DBMS_SCHEDULER.LOGGING_RUNS);
SYS.DBMS_SCHEDULER.SET_ATTRIBUTE_NULL
( name => 'PROD_LOAD_SL_FILES'
,attribute => 'MAX_FAILURES');
SYS.DBMS_SCHEDULER.SET_ATTRIBUTE_NULL
( name => 'PROD_LOAD_SL_FILES'
,attribute => 'MAX_RUNS');
BEGIN
SYS.DBMS_SCHEDULER.SET_ATTRIBUTE
( name => 'PROD_LOAD_SL_FILES'
,attribute => 'STOP_ON_WINDOW_CLOSE'
,value => FALSE);
EXCEPTION
-- could fail if program is of type EXECUTABLE...
WHEN OTHERS THEN
NULL;
END;
SYS.DBMS_SCHEDULER.SET_ATTRIBUTE
( name => 'PROD_LOAD_SL_FILES'
,attribute => 'JOB_PRIORITY'
,value => 1);
SYS.DBMS_SCHEDULER.SET_ATTRIBUTE_NULL
( name => 'PROD_LOAD_SL_FILES'
,attribute => 'SCHEDULE_LIMIT');
SYS.DBMS_SCHEDULER.SET_ATTRIBUTE
( name => 'PROD_LOAD_SL_FILES'
,attribute => 'AUTO_DROP'
,value => FALSE);
END;
and this is part of the unix script get executed:
[oracle@USAC-S009 slc_prod]$ cat load_sl_files.sh
#!/bin/sh
# FILEME: /home/oracle/actual/paytment_files/load_sl_files.sh
# PURPOSE: Load SL files, email .log files
# INSTRUCTIONS/COMMENTS/ASSUMPTIONS: Two SL files will be pulled down
# MAINTENANCE LOG
# REV# DATE AUTHOR QA-ed BY CHANGE DESCRIPTION KEY
DATE=`/bin/date +%d%b%y_%H%M`
HOME=/home/oracle
export HOME
ORACLE_HOME=/u01/app/oracle/product/10.2
export ORACLE_HOME
ORACLE_SID=em
export ORACLE_SID
PATH=/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/home/oracle/bin:/etc:/usr/local/bin:/u01/app/oracle/product/10.2/bin:/bin:/sbin:/usr/bin:/usr/sbin; export PATH
SL_HOME=/home/oracle/actual/payment_files/slc_prod
FILE_HOME=/opt/u02/home/usair
# Call slc.sh to load files
ssh usac09.usacad.loc > /home/oracle/actual/payment_files/slc_prod/slc.sh.log <<EOT
/u01/app/oracle/slc.sh 2>&1
sleep 120
EOT
# Move logs from usac09 to usac-s009
#ssh usac09.usacad.loc >> /home/oracle/actual/payment_files/slc_prod/slc.sh.log <<EOT
# /u01/app/oracle/move_logs.sh 2>&1
# sleep 15
#EOT
.............Hi!
I have shell scripts with number of mandatory parameters.
How can I write it in sql procedure in order to create exact command line that shuold be executed in Linux?
the procedure looks like :
CREATE OR REPLACE procedure CRM.run_tts (p_tts_name in varchar2 )
is
v_tts_name varchar2(2000);
v_job_name varchar2(2000);
v_source varchar2(200);
v_target varchar2(200);
Begin
v_tts_name := upper(p_tts_name);
--if p_instance_type='P' then
v_source := 'psdwh';
v_target := 'pudwh';
--end if;
if v_tts_name is not null then
v_job_name := 'run_tts_'||v_tts_name;
v_source := '/-ssid/'||v_source;
v_target := '/-tsid/'||v_target;
v_tts_name := '/-tbsname/'||v_tts_name;
DBMS_SCHEDULER.create_job (
job_name => v_job_name,
job_type => 'EXECUTABLE',
job_action => '/tmp/trans_asm',
start_date => SYSTIMESTAMP,
number_of_arguments => 3,
enabled => false,
auto_drop => false);
--dbms_scheduler.set_job_argument_value(job_name=>v_job_name,argument_position=>1,argument_value=>'/software/oracle/dba/scripts/bin/trans_asm.sh'||' '||c_rec.id||' '||'"'||c_rec.view_name||'"'||' '||v_setnum||' '||'"'||V_MACHINE_TYPE||'"'||' '||'"'||p_mode||'"');
dbms_scheduler.set_job_argument_value(job_name=>v_job_name,argument_position=>1,argument_value=>v_source);
dbms_scheduler.set_job_argument_value(job_name=>v_job_name,argument_position=>2,argument_value=>v_target);
dbms_scheduler.set_job_argument_value(job_name=>v_job_name,argument_position=>3,argument_value=>v_tts_name);
-- dbms_scheduler.set_job_argument_value(job_name=>v_job_name,argument_position=>1,argument_value=>'/software/oracle/dba/scripts/bin/trans_asm_ps.sh');
--dbms_scheduler.set_job_argument_value(job_name=>v_job_name,argument_position=>1,argument_value=>'/tmp/test.sh');
-- trans_asm -ssid tsdwh -tsid tudwh -tbsname DW_BILLING_TTS
dbms_scheduler.enable(name=>v_job_name);
end if;
end;
the command looks like :
trans_asm -ssid psdwh -tsid pudwh -tbsname YOAV_TTS
Thank you !
Valerie -
ORA-27369: job of type EXECUTABLE failed with exit code
am getting this error
ORA-27369: job of type EXECUTABLE failed with exit code: Operation not permitted.
We have been using this for such a long time without any problems.this is the plsql scheduler :
Please help
BEGIN
SYS.DBMS_SCHEDULER.CREATE_JOB
job_name => 'PROD_LOAD_SL_FILES'
,start_date => TO_TIMESTAMP_TZ('2005/12/02 17:05:00.000000 -05:00','yyyy/mm/dd hh24:mi:ss.ff tzh:tzm')
,repeat_interval => NULL
,end_date => NULL
,job_class => 'DEFAULT_JOB_CLASS'
,job_type => 'EXECUTABLE'
,job_action => '/home/oracle/actual/payment_files/slc_prod/load_sl_files.sh'
,comments => 'Loads SL files, uploads logs to database and sends email to Disbursement and DBA teams'
SYS.DBMS_SCHEDULER.SET_ATTRIBUTE
( name => 'PROD_LOAD_SL_FILES'
,attribute => 'RESTARTABLE'
,value => FALSE);
SYS.DBMS_SCHEDULER.SET_ATTRIBUTE
( name => 'PROD_LOAD_SL_FILES'
,attribute => 'LOGGING_LEVEL'
,value => SYS.DBMS_SCHEDULER.LOGGING_RUNS);
SYS.DBMS_SCHEDULER.SET_ATTRIBUTE_NULL
( name => 'PROD_LOAD_SL_FILES'
,attribute => 'MAX_FAILURES');
SYS.DBMS_SCHEDULER.SET_ATTRIBUTE_NULL
( name => 'PROD_LOAD_SL_FILES'
,attribute => 'MAX_RUNS');
BEGIN
SYS.DBMS_SCHEDULER.SET_ATTRIBUTE
( name => 'PROD_LOAD_SL_FILES'
,attribute => 'STOP_ON_WINDOW_CLOSE'
,value => FALSE);
EXCEPTION
-- could fail if program is of type EXECUTABLE...
WHEN OTHERS THEN
NULL;
END;
SYS.DBMS_SCHEDULER.SET_ATTRIBUTE
( name => 'PROD_LOAD_SL_FILES'
,attribute => 'JOB_PRIORITY'
,value => 1);
SYS.DBMS_SCHEDULER.SET_ATTRIBUTE_NULL
( name => 'PROD_LOAD_SL_FILES'
,attribute => 'SCHEDULE_LIMIT');
SYS.DBMS_SCHEDULER.SET_ATTRIBUTE
( name => 'PROD_LOAD_SL_FILES'
,attribute => 'AUTO_DROP'
,value => FALSE);
END;
and this is part of the unix script get executed:
[oracle@USAC-S009 slc_prod]$ cat load_sl_files.sh
#!/bin/sh
# FILEME: /home/oracle/actual/paytment_files/load_sl_files.sh
# PURPOSE: Load SL files, email .log files
# INSTRUCTIONS/COMMENTS/ASSUMPTIONS: Two SL files will be pulled down
# MAINTENANCE LOG
# REV# DATE AUTHOR QA-ed BY CHANGE DESCRIPTION KEY
DATE=`/bin/date +%d%b%y_%H%M`
HOME=/home/oracle
export HOME
ORACLE_HOME=/u01/app/oracle/product/10.2
export ORACLE_HOME
ORACLE_SID=em
export ORACLE_SID
PATH=/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/home/oracle/bin:/etc:/usr/local/bin:/u01/app/oracle/product/10.2/bin:/bin:/sbin:/usr/bin:/usr/sbin; export PATH
SL_HOME=/home/oracle/actual/payment_files/slc_prod
FILE_HOME=/opt/u02/home/usair
# Call slc.sh to load files
ssh usac09.usacad.loc > /home/oracle/actual/payment_files/slc_prod/slc.sh.log <<EOT
/u01/app/oracle/slc.sh 2>&1
sleep 120
EOT
.............Hi,
The user oracle who owns the scheduler already has permissions for the mailx and the same script is able to send notifications when run manully. Do I need to set additional permissions for scheduler ?
Also the db version is 10.2.0.5.
Thanks -
ORA-27369: job of type EXECUTABLE failed with exit code: Unknown error
Hello DBAs,
I am trying to schedule a shell script through dbms_scheduler.CREATE_JOB
My database version is 10.2.0.3.0.
I can successfully schedule the job, but while running, it throwing ORA-27369 with out exit code.
Given below are the actions performed -
-- Created shel scripts-
$ cat shell01.sh
./test.sh >> test.log
$
$ cat test.sh
sqlplus -s "/ as sysdba" <<EOF
SELECT SUBSTR(host_name,0,10) host_name, instance_name, status,TO_CHAR(startup_time,'dd-mm-yy hh24:mi:ss') startup_time
FROM v\$instance;
disconnect;
exit;
EOF
-- Granting privileges - (eventhough I have tried from 'SYS' schema)
GRANT create Job, create external job, execute any class, execute any program , manage scheduler to sys;
-- Drop job with name RUN_SHELL01
BEGIN
dbms_scheduler.drop_job('RUN_SHELL01');
END;
-- Schedule job with name RUN_SHELL01
BEGIN
dbms_scheduler.CREATE_JOB
(job_name => 'RUN_SHELL01',
job_type => 'EXECUTABLE',
job_action => '/home/ora1023/shell01.sh',
start_date => '18-AUG-09 05:37:00 AM',
end_date => NULL,
repeat_interval => 'FREQ=MINUTELY',
enabled => false,
comments => 'Run shell-script');
END;
--Enable job
BEGIN
dbms_scheduler.enable('RUN_SHELL01');
END;
-- Checking status
SELECT owner, job_name, enabled FROM dba_scheduler_jobs;
select JOB_NAME,STATUS,ERROR# from dba_scheduler_job_run_details where job_name='RUN_SHELL01';
-- Executing the job
SQL> exec dbms_scheduler.run_job('RUN_SHELL01');
BEGIN dbms_scheduler.run_job('RUN_SHELL01'); END;
ERROR at line 1:
ORA-27369: job of type EXECUTABLE failed with exit code: Unknown error
ORA-06512: at "SYS.DBMS_ISCHED", line 150
ORA-06512: at "SYS.DBMS_SCHEDULER", line 441
ORA-06512: at line 1
Anybody please suggest a solutions for this -My shell script will work as below -
user01@test01:/home/user01 : cat shell01.sh
./test.sh >> test.log
user01@test01:/home/user01 :
user01@test01:/home/user01 :
user01@test01:/home/user01 : cat test.sh
sqlplus -s "/ as sysdba" <<EOF
SELECT SUBSTR(host_name,0,10) host_name, instance_name, status,TO_CHAR(startup_time,'dd-mm-yy hh24:mi:ss') startup_time
FROM v\$instance;
disconnect;
exit;
EOF
user01@test01:/home/user01 : ./shell01.sh
user01@test01:/home/user01 : ls -ltr
-rw-r--r-- 1 ora1023 dba 155 Aug 26 05:28 test.log
user01@test01:/home/user01 : cat test.log
HOST_NAME INSTANCE_NAME STATUS STARTUP_TIME
test01 oft1 OPEN 18-08-09 08:22:45
user01@test01:/home/user01 :
** I think this shell script is working fine! ..its only for testing..
and while we are querying dba_scheduler_job_run_details for additional info-
SQL> select s.STATUS ,s.ADDITIONAL_INFO from dba_scheduler_job_run_details s where s.job_name='RUN_SHELL01';
STATUS
ADDITIONAL_INFO
STANDARD_ERROR="execve: Exec format error"
FAILED
ORA-27369: job of type EXECUTABLE failed with exit code: Unknown error
STANDARD_ERROR="execve: Exec format error"
I think Metalink Doc ID: 555160.1 (Schedular Job of Type 'EXECUTABLE' Fails with ORA-27369 "exit code: 255" STANDARD_ERROR="execve: Exec format error"). Will help me to solve this issue Since i am using ksh -
# echo $SHELL
/bin/ksh
Edited by: Rajesh Menon on Aug 25, 2009 9:21 PM
Maybe you are looking for
-
Error handling in master detail form
Hi Guys, Apex 4.2.1 I use the custum error handling of apex to customize the errror message. I add a row in the detail form with a dupicate key which is handled by the error function after submiiting the master record the error message is correct dis
-
Getting first row in a group by order by sql
Hi all, I'm having problems with the query below. What I want is to get a count of hotelid and group it then take the top result. My problem is that the version of oracle that I'm using is giving me errors because of the nested group by, order by. Is
-
How to execute immediately a query in a form
Hi, I've got a form which opens another form on which I have created a data block based on a FROM clause query where the where clause has a column joined a GLOBAL variable initialized in the first form. How can I get the second form execute immediate
-
Streaming of Music and Videos using iCloud
I have been ripping all my CD collection and my DVD collection to be able to play it on iPhone, iPad and iPod. Now with iTunes being in the cloud I was wondering if it is possible to stream both my Music and my Videos directly from the cloud to my a
-
Passing complex XML to session EJB with automatic WSIF mapping
Per Re: invoking ejb using wsif it looks like WSIF can pass DOM to EJB. Can anyone point me to an example using WSIF to pass a complex document to EJB uin the form of DOM, String or JAX-RPC?