Executing one transaction in German in Test configuration

I am facing one problem in one of the scenario .
    I have 7 transaction in one scenario
   va01
   wf10
   ZMB01
   MB03
   WF30
   ZWF70FRI
   LL01
   and so on......
   The transaction ZWF70FRI is only working in German settings.
   Is it possible to run ZWF70FRI in German settings and remaining in english Launguage settings as part of chaing and test configuration?
Thanks in Advance
sreedhar d

Hi Sreedhar,
My Solution works, when you are executing all the scripts in the same target system.
Create 2 RFC's one for EN and another for DE.
Make the EN RFC as the default one and DE one for the REF of the ZWF70FRI script.
Like REF ( ZWF70FRI , ZWF70FRI_1 , TARGET_DE ).
This should work fine..
Best regards,
Harsha

Similar Messages

JCO Call - Executing SAP Transactions

I'm trying to execute one transaction - providing the necessary input i.e. Creating a Service Entry sheet.
However, the return message indicated that it is erroneous - throwing the message "Service specifications in wrong structure".
Does this imply that the import parameters (tables etc) are somewhat wrongly input?
Anyone encountered this before?

Hi
calling BAPI_ENTRYSHEET_CREATE.
passing in
Importparameter = ENTRYSHEETHEADER
TABLES = ENTRYSHEETACCOUNTASSIGNMENT, ENTRYSHEETSERVICES, ENTRYSHEETSRVACCASSVALUES.
When I commented out ENTRYSHEETSERVICES and ENTRYSHEETSRVACCASSVALUES, I can create the service entry sheet. So I am suspecting it's either these 2 tables that are giving me the problem. Yet to know what - we wont need to populate most values in those 2 tables no?
Thanks

JCO Call - Executing SAP Transaction

I'm trying to execute one transaction - providing the necessary input i.e. Creating a Service Entry sheet.
However, the return message indicated that it is erroneous - throwing the message "Service specifications in wrong structure".
Does this imply that the import parameters (tables etc) are somewhat wrongly input?
Anyone encountered this before?

Hi
calling BAPI_ENTRYSHEET_CREATE.
passing in
Importparameter = ENTRYSHEETHEADER
TABLES = ENTRYSHEETACCOUNTASSIGNMENT, ENTRYSHEETSERVICES, ENTRYSHEETSRVACCASSVALUES.
When I commented out ENTRYSHEETSERVICES and ENTRYSHEETSRVACCASSVALUES, I can create the service entry sheet. So I am suspecting it's either these 2 tables that are giving me the problem. Yet to know what - we wont need to populate most values in those 2 tables no?
Thanks

Moving the 80 Million records from Conversion database to System Test database (Just for one transaction table) taking too long.

Hello Friends,
The background is I am working as conversion manager and we move the data from oracle to SQL Server using SSMA and then we will apply the conversion logic and then move the data to system test ,UAT and Production.
Scenario:
Moving the 80 Million records from Conversion database to System Test database (Just for one transaction table) taking too long. Both the databases are in the same server.
Questions are…
What is best option?
IF we use the SSIS it’s very slow and taking 17 hours (some time it use to stuck and won’t allow us to do any process).
I am using my own script (Stored procedure) and it’s taking only 1 hour 40 Min. I would like know is there any better process to speed up and why the SSIS is taking too long.
When we move the data using SSIS do they commit inside after particular count? (or) is the Microsoft is committing all the records together after writing into Transaction Log
Thanks
Karthikeyan Jothi

http://www.dfarber.com/computer-consulting-blog.aspx?filterby=Copy%20hundreds%20of%20millions%20records%20in%20ms%20sql
Processing
hundreds of millions records can be done in less than an hour.
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

How to execute a MTS (Master Test Script) in SAP ECATT Test Configuration for multiple variants.

I have a MTS (Master Test Script) which references 4 Test Scripts. As of now, I am able to run this MTS directly by opening it as a Test Script and running it for default test data.
Now, I want to run this MTS in SAP ECATT Test Configuration for multiple variants/test data. I am not able to see any parameter if I enter MTS in the Test Configuration.
Below thread is similar to my requirement but I am not able to understand the solution properly.
eCATT - how to run multiple test scripts with input variables in different test scripts?
Any help in this case would be highly appreciated.
Thanks & Regards,
Vaibhav Gupta

I have a MTS (Master Test Script) which references 4 Test Scripts. As of now, I am able to run this MTS directly by opening it as a Test Script and running it for default test data.
Now, I want to run this MTS in SAP ECATT Test Configuration for multiple variants/test data. I am not able to see any parameter if I enter MTS in the Test Configuration.
Below thread is similar to my requirement but I am not able to understand the solution properly.
eCATT - how to run multiple test scripts with input variables in different test scripts?
Any help in this case would be highly appreciated.
Thanks & Regards,
Vaibhav Gupta

Sql Exception on Testing Configuration with SQL Server JDBC driver for XA

I have a requirement of analyzing the behavior of SQL Server JDBC data sources for XA transactions in our application.We have been using Non-XA drivers for both Oracle and SQL Server as we had no requirement for transactions spanning across multiple databases in past.I have setup and tested the XA driver for Oracle (Oracle Driver (Thin XA) for Instance Connections 9.0.1,9.2.0,10,11) in Weblogic 11g and its working perfectly for transactions spanning across two databases.No when I am trying to configure weblogic 11g R1 for Sql server JDBC driver to support XA transactions with driver details as follows,
Server:Weblogic 11g R1
Driver Type: MS Sql Server
Database Driver :Oracle's MS SQL Server Driver(Type 4 XA) Version:7.0,2000,2005)
Database:SQL Server 2005(Single Instance)
and try to create a new data source and select "Test Configuration" and following error is thrown ,
<Mar 17, 2011 4:49:49 PM GMT+05:30> <Error> <Console> <BEA-240003> <Console encountered the following error java.sql.SQLException: [OWLS][SQLServer JDBC Driver][SQLServer]xa_open (0) returns -3
at weblogic.jdbc.sqlserverbase.BaseExceptions40.createAppropriateSQLExceptionInstance(Unknown Source)
at weblogic.jdbc.sqlserverbase.BaseExceptions40.createSQLException(Unknown Source)
at weblogic.jdbc.sqlserverbase.BaseExceptions.createException(Unknown Source)
at weblogic.jdbc.sqlserverbase.BaseExceptions.getException(Unknown Source)
at weblogic.jdbc.sqlserver.tds.TDSRequest.processErrorToken(Unknown Source)
at weblogic.jdbc.sqlserver.tds.TDSRequest.processReplyToken(Unknown Source)
at weblogic.jdbc.sqlserver.tds.TDSRPCRequest.processReplyToken(Unknown Source)
at weblogic.jdbc.sqlserver.tds.TDSRequest.processReply(Unknown Source)
at weblogic.jdbc.sqlserver.SQLServerImplStatement.getNextResultType(Unknown Source)
at weblogic.jdbc.sqlserverbase.BaseStatement.commonTransitionToState(Unknown Source)
at weblogic.jdbc.sqlserverbase.BaseStatement.postImplExecute(Unknown Source)
at weblogic.jdbc.sqlserverbase.BasePreparedStatement.postImplExecute(Unknown Source)
at weblogic.jdbc.sqlserverbase.BaseStatement.commonExecute(Unknown Source)
at weblogic.jdbc.sqlserverbase.BaseStatement.executeUpdateInternal(Unknown Source)
at weblogic.jdbc.sqlserverbase.BasePreparedStatement.executeUpdate(Unknown Source)
at weblogic.jdbcx.sqlserver.SQLServerImplXAResource.executeXaRpc(Unknown Source)
at weblogic.jdbcx.sqlserver.SQLServerImplXAResource.executeXaRpc(Unknown Source)
at weblogic.jdbcx.sqlserver.SQLServerImplXAResource.open(Unknown Source)
at weblogic.jdbcx.sqlserverbase.BaseXAConnection.init(Unknown Source)
at weblogic.jdbcx.sqlserverbase.BaseXAConnection40.init(Unknown Source)
at weblogic.jdbc.sqlserverbase.BaseClassCreatorForJDBC40.createXaConnection(Unknown Source)
at weblogic.jdbcx.sqlserverbase.BaseXADataSource.getXAConnection(Unknown Source)
at com.bea.console.utils.jdbc.JDBCUtils.testConnection(JDBCUtils.java:550)
at com.bea.console.actions.jdbc.datasources.createjdbcdatasource.CreateJDBCDataSource.testConnectionConfiguration(CreateJDBCDataSource.java:450)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.beehive.netui.pageflow.FlowController.invokeActionMethod(FlowController.java:870)
at org.apache.beehive.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:809)
at org.apache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:478)
at org.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java:306)
at org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:336)
at org.apache.beehive.netui.pageflow.internal.FlowControllerAction.execute(FlowControllerAction.java:52)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.access$201(PageFlowRequestProcessor.java:97)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor$ActionRunner.execute(PageFlowRequestProcessor.java:2044)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors$WrapActionInterceptorChain.continueChain(ActionInterceptors.java:64)
at org.apache.beehive.netui.pageflow.interceptor.action.ActionInterceptor.wrapAction(ActionInterceptor.java:184)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors$WrapActionInterceptorChain.invoke(ActionInterceptors.java:50)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors$WrapActionInterceptorChain.continueChain(ActionInterceptors.java:58)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors.wrapAction(ActionInterceptors.java:87)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processActionPerform(PageFlowRequestProcessor.java:2116)
at com.bea.console.internal.ConsolePageFlowRequestProcessor.processActionPerform(ConsolePageFlowRequestProcessor.java:261)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
at com.bea.console.internal.ConsoleActionServlet.process(ConsoleActionServlet.java:256)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at com.bea.console.internal.ConsoleActionServlet.doGet(ConsoleActionServlet.java:133)
at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1199)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:686)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.processActionInternal(ScopedContentCommonSupport.java:142)
at com.bea.portlet.adapter.scopedcontent.PageFlowStubImpl.processAction(PageFlowStubImpl.java:106)
at com.bea.portlet.adapter.NetuiActionHandler.raiseScopedAction(NetuiActionHandler.java:111)
at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:181)
at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:167)
at com.bea.netuix.servlets.controls.content.NetuiContent.handlePostbackData(NetuiContent.java:225)
at com.bea.netuix.nf.ControlLifecycle$2.visit(ControlLifecycle.java:180)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:324)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:130)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:352)
at com.bea.netuix.nf.Lifecycle.runInbound(Lifecycle.java:184)
at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:159)
at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:388)
at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:258)
at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:199)
at com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:251)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.bea.console.utils.MBeanUtilsInitSingleFileServlet.service(MBeanUtilsInitSingleFileServlet.java:47)
at weblogic.servlet.AsyncInitServlet.service(AsyncInitServlet.java:130)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
I followed the instruction in weblogic jdbc drivers guide to configure the JTA Transactions to support XA on SQL Server machine and weblogic server which included,
1.Copying sqljdbc.dll copied to SQL_Server_Root/bin directory from WL_HOME\server\lib.
2.Copied instjdbc.sql to sql server machine and executed the script with following output,
Changed database context to 'master'.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_open', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_open2', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_close', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_close2', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_start', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_start2', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_end', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_end2', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_prepare', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_prepare2', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_commit', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_commit2', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_rollback', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_rollback2', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_forget', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_forget2', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_recover', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_recover2', because it does not exist or you do not have permission.
creating JDBC XA procedures
instxa.sql completed successfully.
3.Verified that MSDTC service is running on both SQL Server and weblogic machines with XA Transaction enabled and DTC option enabled for both inbound and outbound connections.
4.Copied sqljdbc.jar (version 3.0 downloaded from msdn portal) to "C:\Oracle\Middleware\wlserver_10.3\server\ext\jdbc\sqlserver" directory and updated weblogic_classpth variable in commEnv.cmd file.
set WEBLOGIC_CLASSPATH=%JAVA_HOME%\lib\tools.jar;%BEA_HOME%\utils\config\10.3\config-launch.jar;%WL_HOME%\server\lib\weblogic_sp.jar;%WL_HOME%\server\lib\weblogic.jar;%FEATURES_DIR%\weblogic.server.modules_10.3.2.0.jar;%WL_HOME%\server\lib\webservices.jar;%ANT_HOME%/lib/ant-all.jar;%ANT_CONTRIB%/lib/ant-contrib.jar;C:\Oracle\Middleware\wlserver_10.3\server\ext\jdbc\sqlserver\server\ext\jdbc\sqlserver\sqljdbc.jar
Can some one please provide some input on whats causing this and any other steps needs to be followed to implement XA support using SQL Server JDBC driver.

You seem to have done everything correctly and diligently. I would ask that you open
an official support case.

Error while running test configuration

Hi,
I created a test script using SAPGUI and test configuration.In test configuration,i created 2 variants other than default one.Downloaded the variants and executed it. It was giving error "Error inn ecatt command SAPGUI","Cannot Find Screen Element in Replay Mode". When i run test script alone,its working fine.
Please tell me how to correct the problem.
Thanks,
Aparna.

Hello Aparna,
As per the error description give by you , it means that when you execute the script recorded the eCATT control is unable to find the screen element in the screen recorded , possible reasons may be that the control may be in some other screen and trying to find the screen element of the other screen in the present screen.
Solution to this may be check the connection id and the session id of the SAPGUI where the script is failing.
Ideally all the connection id and session id of all the SAPGUI's recorded has to be same so that execution takes place in a single session.
Hope it answers your question.
Thanks and Best regards,
Ajay

How to run Test Configuration in XI

Dear all experts,
I am new in SAP Netweaver and I am trying to get certify my products. Thus, I have some questions and appreciate you can help to clear my doubts below.
1. I have finished configuration in XI, but when I try to run Test Configuration from the Tools, it show error in Receiver Determination stage. Can anyone help to explain how to perform this test? and what should I put in Payload?
The error message:
Receiver Determination
Internal Error
HTTP connection to ABAP Runtime failed. Error: 403 Forbidden URL: http://pwdf0880.dmzwdf.sap.corp:50080/sap/xi/simulation?sap-client= User: XIDIRUSER
2. My Scenario is a Web Screen (asp.net) calling and passsing a parameter to XI Server, then XI will execute a BAPI to return some data. Can any expert out there give some sample codes in asp.net that send HTTP Request to XI Server?
3. What is the use of WSDL in XML format?
Thanks in advance.
Best regards.
Message was edited by: Adam Lee

Hello Adam,
You sent this other question (below) to my email box. I will answer it here so that other people will benefit from it. To unlock an object which someone has locked, goto homepage of SAP Exchange Infrastructure --> Click on the link at the upper right hand side called "Administration" --> Enter the User name and password (you might not have authorization) to display page --> Select "Lock overview" (left panel) and remove the lock of your selected user.
I've gone ahead to remove it for you.
Also, I did a check on your IS in the Integration Directory called, IS_DISPLAYPO_SUPPLIER, and there was no error. Did you fix it already? It looks like you have everything correctly defined in my first pass. Please let me know if you are still stuck.
Have you also asked your consultant to look into this?
Regards,
John Ta
From: Adam Lee [mailto:[email protected]]
Sent: Monday, Oct 09, 2006 12:19 AM
Subject: RE: Category "SAP NetWeaver - Exchange Infrastructure " has been updated by Adam Lee
Dear John Ta,
Thank you for your kindness and willing to help.
I have sent out contract for the certification. Tuhin is the assigned
consultant to us.
By the way, I have one more question here hoping you able to help me. I
would like to delete an object in XI, but it show an error "Object Data Type
DT_PO_RESP | http://ep-net.com/xi/eProcurement/scm/40 currently being edited
by user EPASIA"
It seems that this object is being locked as I do not have any screen
editing this object. Appreciate if you can guide me how to unlock this
object and delete it?
Thank you.
Best regards,
Adam Lee.

Master & detail table in one transaction

Experts,
I am useing 11g 11.1.1.4 and ADF BC, I have thought about this question quite for a while.
I have a master & detail constructure in one page, master as af:form and detail as af: table.
The master is 'booking' table (booking_id, create_date, create_user, user_contact) ,
and detail is 'booking_line' table ( booking_id, booking_det_id, booking_weight, booking_volume, booking_type)
According to my customer, user have to enter the master and detail data in one transaction and once user clicked the 'Submit booking' (actually is 'commit' operation),
the system need to check at least one detail line have been entered by user, otherwise the error message issued and return back to the current page. how this one can be done? Thanks!

Thanks a lot M.Jabr!
I have used your suggestion as follwoing:
public String cb3_action() {
BindingContext bindingctx = BindingContext.getCurrent();
BindingContainer bindings = null;
bindings = bindingctx.getCurrentBindingsEntry();
DCBindingContainer bindingsImpl = (DCBindingContainer) bindings;
DCIteratorBinding dciter = null;
//access the iterator by its ID value in the PageDef file.
dciter = bindingsImpl.findIteratorBinding("BookingDetOlVO1Iterator");
ViewObject vo= dciter.getViewObject();
long rowsCount= vo.getEstimatedRowCount();
if (rowsCount > 0) {
OperationBinding operationBinding = (OperationBinding)bindings.getOperationBinding("Commit");
Object result = operationBinding.execute();
if (!operationBinding.getErrors().isEmpty())
return null;
return "BookingDone";
} else {
FacesContext context = FacesContext.getCurrentInstance();
FacesMessage msg = new FacesMessage(FacesMessage.SEVERITY_ERROR, null, "Please enter at least one Booking Detail line");
context.addMessage(null, msg);
return null;
but there is another propblem after testing, I found if user just click the 'createInsert' operation in detail table. but without enter any values for some required fields, then can still - return "BookingDone"; that's means the required validation are skipped. any suggestion?

Change ITS parameter setings dynamically for one transaction iview

Hi gurus,
I have a configured ITS parameters and set ~webgui_simple_toolbar = 32
But now in one transaction, only on the last R3 screen (in this transaction) we need standard 'Back' button, (custom back button cannot be configured as this view is a pdf, t-code developed in ABAP )
I can configure 'Back' button by setting ~webgui_simple_toolbar = 40, but then it comes in all the transaction iviews and on all the screens.
Is it possible to set the value of ~webgui_simple_toolbar dynamically, in my t-code in ABAP, so that only for this transaction standard toolbar is visible.
thanks
Nishu

Hi Nishu,
Where exactly have you set the parameter
~webgui_simple_toolbar = 32
i.e in what Service? I believe from your description it is set in the WEBGUI service - which then all your transaction iViews are using to execute? Is this correct
One workaround would be to create an IAC for this one transaction that you are calling. Which would then have the settings
~transaciton <my_transaction>
~webgui_simple_toolbar = 40
~webgui 1
~singletransaction 1
Then setup the iView to be called as an IAC iView?
Regards,
Oisin

Multiple Test Configurations within a Test Configuration

Hi,
Can we have mutiple test coinfigurations as variants to a Test Configuration. I am just checking if we can create a test configuration which can act as a driver script to all the other test configurations which are relevant and selected for runs.
Regards,
Justin

Hello,
Test configurations are created at the script level so for one test script there is exists only one test configuration and you can have multiple variants with the test configuration which can be selected at the run time and executed.
In order to perform the mass run , create test catalogue , select all the required test configuration in the test catalogue create test package and assign it to the test plan and the execution can be made from the test plan at mass.
Thanks & Best regards,
Ajay

One maschine for dev and test

Hallo,
i have one maschine for dev and test. i know that it is possible to do this with 2 instances. SAP recommend to separate dev and test on separate maschines. But it is possible. have anyone experiance with that? When i don´t want 2 instances it is possible to have one instance and separate only the systems for dev and test in sld? Have I to copy the business systems, change the servers and make the configurations in integration directory?
Thanks in advance...
Frank Schmitt

Hi Frank,
one reason for having two systems
is that you won't be able to import
directory to your TEST system easily...
because both r3 (dev and test will have the same integration server - you won't be able to add them to 2 different transport groups... )
this means that you will have to create almost EVERYTHING
in the directory twice...
at least without doing some tricks...
make the life of a developer and create 2 servers
it may cost less then using developers for creating many things twice
Regards,
michal

Error while executing the transaction QC22 (Quality Certificate for Batch)

Hello Friends,
While executing the transaction QC22(Quality Certificate for Batch), after giving the Batch Number and Customer Number, when i am executing it , system is throwing the error message as "Not all data was found for characteristic 90139982 in profile D80D8".
Message no. ZQ010
Diagnosis
Not all data was found for characteristic 90139982, referenced as number 0030 in certificate profile D80D8. The missing data could be the short text, specifications, or results.
System Response
The missing charactertistic will not be printed on the certificate,
Procedure
Review the settings for data orgin of the short text, specifications, and results, and adjust accordingly.
One more thing i would like to add here as against the same batch in april we had taken the print of COA (Quality Certificate) through the transaction QC22. But now we are trying to do that than system is thrown above mentioned error.
As i am new in QM, kindly explain we were to maintain the certificate profile.
Waiting for the experts inputs.
Thanks and Regards,
Jitendra Chauhan

Hi
Try with QA33 you may have display authorization, or check in MB51 on the base of material and batch you can find the lot number generated, then go to QA03 and check the result, if you want to validate the characters check with the inspection plan, the characters entered in the inspection plan and the characters in the concerned certificate profile.
Regards
Naveen.
Edited by: vaddapalli naveen on Jul 1, 2010 1:57 PM

AppContainers_test fails with error during pre-test configuration checks

Hello,
AppContainers_test fails with error during pre-test configuration checks:
"[FAIL] The machine is not properly configured for testing: the test directory "C:\Windows\SYSTEM32\" is not ACL'd to allow execute permission for "APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES"
But that kind of permission for APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES was allowed, also i tried to allow full access, but error was the same.
In the test WindowsFilteringPlatform_Tests, the same requirement "REQ - Wfp-based products must not block App Container apps operating within their declared network intentions by default" was checked successfully.
How can i pass successfully AppContainers_test?
I installed lastest versions of QFE and filters on my server, but it didn't help.

Hi M'Alerter,
I have the same issue, have you found a solution to your problem ?
Cheers,
Ghalem

Error in test configuration -URJENT

Hello every one,
                here i am facing a serious issue from last 5 days. which i am not able to find it where the problem is?.
               the issue is here our scenario is file to R/3. actually on the sender side we created one structure. and on the receiver we have to send this complex data into multiple interfaces. we are going to use proxies to send that data to R/3. I mean MULTI MAPPING
here is the blog that i taken as a reference and followed.
<u>/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible</u>
in ID whenever i am trying to test my configuration it is giving error in INTERFACE DETERMINATION/MAPPING step. here on sender side i am giving the payload directly
we didn't created any communication channel. so we need not create sender agreement.
              i created a mapping program and interface mapping in IR and i tested them also . they are working fine there. but when i am trying to test my scenario in test configuration with the same payload it is giving error in the interface determination and mapping step as intimated above.
              as receiver agreement is unique for an interface i created 3 receiver agreements as we are using three interfaces in receiver side. on the receiver side we are going to use proxies . so we used XI adapter . i am having the doubt that using XI adapter is giving any problem .please let me know.
            please help me . it will be very helpful for me . helpful ideas will be definitely REWARDED.
thanks
Ramana.

Hi Ramana,
I was trying to do the same scenario but stuck up with this.
Could you pls let me know what are the fields contained by ID in target message2 ...
Please check this for your clarification
http://www.flickr.com/photos/11212307@N08/1135395357/
Thanks
dushanth
Message was edited by:
        dushanth ry

Executing one transaction in German in Test configuration

Similar Messages

Maybe you are looking for