Exit screen doesn't work

Hi everyone,
In screen painter there is the code:
WHEN 'EXIT'.
LEAVE PROGRAM.
But it doesn't exit the current screen. What's the problem? (leave screen doesn't work either.)
Thanks!

Hi,
use this.
Process After Input.
Module exit AT EXIT-COMMAND.
in program.
Case Okcode.
When 'Exit'.
leave to screen 0.
Automatic field checks can be avoided by AT EXIT-COMMAND, Which works exactly the same way as cancel works on application tols bar.
EXIT button on the toolbar has FUNCTION TYPE 'E' only function type's can enter a module with addition AT EXIT-COMMAND

Similar Messages

My palm m105's touch screen doesn't work properly after a sync.

I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
My palm m105's touch screen doesn't work properly after a sync.
I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
Thanks in advance!
Post relates to: Palm m105
Post relates to: Palm m105

Maldoman578,
Let's help solve this mystery together! Is your screen freezing after every reboot? Is there any physical/liquid damage on the device? When did this issue begin? Did you notice this after a recent update or application download?
EfrainM_VZW
Follow us on Twitter @VZWSupport

The bottom of my screen doesn't work how do I fix it?

My screen has been cracked for a while now missing a piece of screen in the top and bottom corners of the device. It has been working fine no problems until last night. I think i layed on top of my ipod touch 4g and now the screen doesn't work right and I can't unlock it. I've tried reseting the device and restoring it and that does not help. Is there a mechanical fix I can do I have a screwdriver for ipod screws I just don't know how to fix it. So basically is there a way for me to fix the screen on my device myself if not where can I send it to, to get it fixed and how much and how long will it take. Thanks for any help!

No way to fix it. Seems like a bad digitizer.
Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G and $99 for the other 4Gs. They do not fix yours.
Apple - iPod Repair price
You can send it to Apple
Apple - Support - iPod - Service FAQ
You can do the exchange at an Apple store
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

I cant open apps on my iPhone 4 the touch screen doesn't work. I have restored my phone and still nothing works.

I can't open apps on my iPhone. The touch screen doesn't work. I have restored it already but it still won't work. What can I do.

If the touch screen is not having any response then you probably have a hardware failure. Take your phone to an Apple Store or authorised service provider to have it checked.

The left part of the screen doesn't work very well

The left part of the screen doesn't work very well. It's hard to erase a letter, and impossible to me to insert the "P".
Does it means that I need to replace the screen? Or there is a other solution?

Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new.
If you've gone through ALL the troubleshooting steps and you're still having the problem, then you most likely have a hardware issue and will need to bring your phone to Apple for evaluation.

My macbook screen doesn't work so I have connected it to the TV and now nothing works, I can't see the dock or the finder bar, no folders on desktop either. I don't know what to do!

My macbook screen doesn't work so I have connected it to the TV and now nothing works, I can't see the dock or the finder bar, no folders on desktop either. I don't know what to do!

Do you see anything on the TV?
If you just see your desktop, then your MacBook is defaulting to extended display mode. Try pressing the Command + F1 keys to see if you get the menu bar and other icons.
~Lyssa

TS1363 i need to sync my iphone as its damaged ( water submersion) i can't though as itunes is asking me for my passcode and my screen doesn't work, the phones on though still ringing etc ... Please help

I need to sync my iphone as its damaged ( water submersion) i can't though as itunes is asking me for my passcode and my screen doesn't work, the phones on though still ringing etc ... Please help

You need to do more research before you make purchases like this. You've wasted your money. The ONLY officially unlocked iPhone model sold in the US is the GSM model, and that model is only sold by Apple. That's the model iPhone you should have purchased.
Did you read & understand my initial post? Especially this part:
The unlocking of the GSM portion is just for International travel in order to use local sims. You still have to pay Sprint for the use of their international GSM partner’s network on a “pay as you go basis”.

Touch screen doesn't work!!!

I got my TP two weeks ago, played with it for a day and a half then, in the middle of surfing the web, the touch screen doesn't work. I've contacted HP support and sent my device in for repair. I got it back two days ago (12/30/2011), worked totally fine for 20 mins and the touch screen didn't work again. I've tried using WebOS Doctor 3.0, 3.0.2, 3.0.4 nothing works.
I've tried rebooting it multiple times, still doesn't work. Frustrating I must say....
Any suggestions?
Post relates to: HP TouchPad (WiFi)

Gotcha, so I just want to make sure I'm following you correctly. At this point the screen is probably all black from the auto-turn-off thing. You hit the power button, and the little yellow lock icon appears on the bottom. But when you try to drag the little lock icon, nothing happens. Does that describe what's happening to you?

I have iPhone 5 and the touch screen doesn't work

I have iphone 5 and the touch screen doesn't work,i want to restart it but my touch screen is not working. I read lots of reviews and support from online all in vain. Please help me fix the problem.
<Re-Titled By Host>

Do a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the device to boot back up.
No data is loss doing a reset.

HT1212 My screen doesn't work but I want to connect my phone to iTunes. It's not letting me because I have to enter the passcode. What do I do?

My screen doesn't work but I want to connect my phone to iTunes. It's not letting me because I have to enter the passcode. What do I do?

My screen doesn't work but I want to connect my phone to iTunes.
iPhone, iPad or iPod touch: Not responding or does not turn on
It's not letting me because I have to enter the passcode.
iOS: Forgotten passcode or device disabled after entering wrong passcode
Restore in Recovery Mode:
iClarified - iPhone - How to Put an iPhone Into Recovery Mode
If unsuccessful, try DFU mode:
iClarified - iPhone - How to Put an iPhone Into DFU Mode
After restoring, restore from back-up:
iOS: How to back up
OR
Set as new iPhone:
iOS: How to back up your data and set up as a new device
Hope all this helps.

Windows exit button doesn't work

Hi,
Does anybody know why the windows' red exit button doesn't work for my program?
Thanks

Hamed_47 wrote:
The close button is set to be in the menu, so I it's not in tle list of this close control.
Sorry, I did not understand what you mean.
The ring control lists all the controls you have on the panel, and usually there is a QUIT ot EXIT button. You may want to select this one.
What this ring control does is equivalent to setting the ATTR_CLOSE_CTRL programmatically, i.e. you define the ID of the control for which a commit event is generated when you select the Close item in the Windows system menu.

Exit Customize doesn't work - other questions...

Firefox updated to Beta 29 (i didn't do it x_x) and everything is confusing me right now. Actually pissing me off to be honest. I was playing around this new, tried to customize it but didn't work. I followed this page and nothing. https://support.mozilla.org/en-US/kb/customize-firefox-controls-buttons-and-toolbars the Exit Customize doesn't work at all. I have to quit firefox using Alt+F4 and start all over.
So, that doesn't work for me. How do I go back to the previous version of Firefox or how do I undo this Beta 29 thing? I really don't like it.

You can check for problems with preferences.
Delete a possible user.js file and numbered prefs-##.js files and rename (or delete) the prefs.js file to reset all prefs to the default value including prefs set via user.js and prefs that are no longer supported in the current Firefox release.
*http://kb.mozillazine.org/Preferences_not_saved
*http://kb.mozillazine.org/Resetting_preferences
You can check for problems caused by a corrupted localstore.rdf file.
*http://kb.mozillazine.org/Corrupt_localstore.rdf
Create a new profile as a test to check if your current profile is causing the problem.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Exit Command doesn't work

Guys, I've put a few hours researching the web for code examples on how to program the Exit button on a J2ME app. It didn't help me finding out why my Exit simply doesn't work. It must be something trivial that I'm just not aware of. I would really appreciate your help analyzing the following code.
Regards,
Filipe
public class BiblioMIDlet extends MIDlet implements CommandListener {
     private Display display;
     private Form gui;
     private static Command renewCommand, exitCommand;
     public BiblioMIDlet() {
          renewCommand = new Command("Renew", Command.ITEM, 1);
          exitCommand = new Command("Exit", Command.EXIT, 1);
          gui = new Form("Biblio");
          display = Display.getDisplay(this);
     protected void startApp() throws MIDletStateChangeException {
          this.showLoginForm();
     private void showLoginForm() {
          TextField user = new TextField("User", null, 9, TextField.NUMERIC);
          TextField password = new TextField("Password", null, 4, TextField.PASSWORD | TextField.NUMERIC);
          gui.append(user);
          gui.append(password);
          gui.addCommand(renewCommand);
          gui.addCommand(exitCommand);
          display.setCurrent(gui);
     protected void pauseApp() {     }
     public void commandAction(Command c, Displayable s) {
          if (c == exitCommand) {
               destroyApp(false);
               notifyDestroyed();
     protected void destroyApp(boolean arg0) {      }
}

Hai
I think u missed to add the commandListener in your code "gui.setCommandListener(this)"
public class BiblioMIDlet extends MIDlet implements CommandListener {
     private Display display;
     private Form gui;
     Command renewCommand, exitCommand;
     public BiblioMIDlet() {
          renewCommand = new Command("Renew", Command.ITEM, 1);
          exitCommand = new Command("Exit", Command.EXIT, 1);
          gui = new Form("Biblio");
          display = Display.getDisplay(this);
     protected void startApp() throws MIDletStateChangeException {
          this.showLoginForm();
     private void showLoginForm() {
          TextField user = new TextField("User", null, 9, TextField.NUMERIC);
          TextField password = new TextField("Password", null, 4, TextField.PASSWORD | TextField.NUMERIC);
          gui.append(user);
          gui.append(password);
          gui.addCommand(renewCommand);
          gui.addCommand(exitCommand);
/* u missed this line of code in your program*/
          gui.setCommandListener(this);
/* End */
          display.setCurrent(gui);
     protected void pauseApp() {     }
     public void commandAction(Command c, Displayable s) {
          if (c == exitCommand) {
               destroyApp(false);
{ notifyDestroyed();
     protected void destroyApp(boolean arg0)      }
regards
jinesh

Mavericks, AppleTV-3, Accessibility Zoom, Zoom Style: Full Screen, doesn't work at all. Help.

I'm a teacher using an AppleTV 3 (latest updates) to project & teach FCP X in a large iMac lab. Using my Macbook Pro (late 2011), I could use any of the Zoom, Zoom Styles. However, since upgrading to Mavericks, I have an issue when projecting my laptop screen to white screen. The problem is when using Accessibility Zoom, Zoom Style: Full Screen, doesn't work at all. Strangely, Zoom Style: Picture in Picture works fine. I've tried other macs running Mountain Lion, both work without issue. Please help. This is killing my effectiveness.

George Johnson wrote:
Is the page size of the PDF 8.5 inches wide? What do you have set for the "Acrobat > Preferences > Page Display > Custom Resolution" setting? What is the pixels/inch spec for your display?
I have a 13" MacBook Pro. The display is 1280x800 pixels and about 11-1/4 inch wide.
1280 pixels / 11.25 inch = 113.8 pixels/inch
When calibrated using the method I mentioned above, my custom resolution setting in Acrobat is 114 pixels/inch, which is close enough to the spec of 113 for this display.
Yes its 8.5 wide I printed a test page its formatted 8.5 by 11
Acrobat does a little differently. Word and other applications, for example 100% means to physically see right, & left edge, and top & bottom. you see the entire page without scrolling. an 8.5 by 11 page. If you want to see 8.5 width you set page width which for Portriat page its 292%
My monitor settings 1920 by 1200
DPI system default 131 custom 110
Also on Mac what you see on screen depends upon the Printer used. (Just FYI only)

I need help with my ipod touch 4, i hit it on my table and now the touch screen doesn't work at all

i got mad and hit my ipod agaisnt the table and now the touch part of the screen doesn't work i need help, i don't want to send it to Apple because i have music that i downloaded for free and i'm worried all my songs, pics, videos will go away if i send it to them.

Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Maybe just a loose connection they can fix.
Apple Retail Store - Genius Bar
Here is how to get your media off the iPod.
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

Exit screen doesn't work

Similar Messages

Maybe you are looking for