Expandable list - Table of Contents - Please Help

I used the code found on the following page to create an expandable list that worked great: Expandable list : at www.learningmovabletype.com
I created a table of contents for our Policies and Procedures that showed the main topics and when clicked listed each policy subcategory. The following link is for this page:http://bsacapheadstart.com/PoliciesandProcedures.html
My company bought the Adobe CS4 package that included Dreamweaver several months ago and I am trying to create this same page using it. http://grantee.bsacapheadstart.com/Policies%20and%20Procedures.htm
The problem as you will notice if you go to this page and click on the categories, is that only the first topic will expand and all the others will not.
I have reviewed the code several times and do not see any differences between the first topic heading and the others; nor between the code that works on the first page and the page I am creating using Dreamweaver.
I have thought about using the Spry Collapsible Panel or Accordian but it is not exactly what we want. Besides everyone is already comfortable with this layout.
If anyone could please help, it would be greatly appreciated! Thanks!

Start with valid code. It makes trouble shooting much simpler.
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.grantee.bsacapheadstart.com%2 FPolicies%2520and%2520Procedures.htm
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Similar Messages

How to have the check box fields in the table ...Please help me out.

Hi
can any one give me code save the checkbox field to save in the table.
I have displayed the checkboxes using the loops from the table but when i am clicking the checkboxes and pressing the button save its not saving in the database table.
please help me out. Its urgent .
Thank you very much suneetha

DOnt duplicate the thread...Reply to the below thread..
Re: In the loop to display checkboxes.
Raja T

Disappearing Window Content - please help?

Hi,
I'm not very familiar with Java at all, but I have to use it for an assignment, part of which involves randomly generating a maze and displaying it on the screen. I use a JFrame object for displaying.
However, sometimes when I run the program, the maze appears for less than a second, then disappears leaving a blank frame. At other times, the frame is completely empty. And sometimes, the maze is displayed the way it should be (this usually happens after a fresh recompiling). My code runs thus:
public class Test
public static void main(String argv[])
JFrame test = new JFrame("nuts");
test.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
test.setSize(700, 700);
Container content = test.getContentPane();
test.setVisible(true);
// creating maze object called 'maze' here
maze.paint(content.getGraphics());
Here is my paint method:
public void paint (Graphics g) {
int x, y;
for (x = 1; x < 24; ++x)
for (y = 1; y < 39; ++y) {
if ((maze[x][y] & 1) != 0) /* This cell has a top wall */
g.drawLine (x * 10, y * 10, x * 10 + 10, y * 10);
if ((maze[x][y] & 2) != 0) /* This cell has a bottom wall */
g.drawLine (x * 10, y * 10 + 10, x * 10 + 10, y * 10 + 10);
if ((maze[x][y] & 4) != 0) /* This cell has a left wall */
g.drawLine (x * 10, y * 10, x * 10, y * 10 + 10);
if ((maze[x][y] & 8) != 0) /* This cell has a right wall */
g.drawLine (x * 10 + 10, y * 10, x * 10 + 10, y * 10 + 10);
Can anyone please explain to me why my content disappears at times, and is displayed at others? I am in sore need of help, and would be very grateful if someone could give me a hint... If I'm doing something stupid here, my apologies in advance.
Thanks.
MM.

I understand that I didn't set the tags to display my code properly - I'm sorry, I didn't know about it... But I don't quite understand what else I've done wrong. Let me rephrase my question:
I'm trying to print a maze on screen using a JFrame object. Unfortunately, when I run the program (and quit it properly after each time), one of the following happens:
a) The maze is printed correctly.
b) The maze appears for less than a second, then disappears leaving a blank JFrame window.
c) The JFrame window remains blank (which may be the same thing as b, only the maze flashes by too fast for me to notice).
I've gone through a few JFrame tutorials, and I think I've followed the general guidelines. I tried looking for help at other sources - to see if anyone else had trouble with their Jframe content being displayed only sometimes. I even tried setting the Jframe object to always appear on top, but it didn't help. Since I've little experience with coding in Java, I was wondering if someone could please help me by telling me if I'm doing something wrong?
Here's my code:
public class Test extends JFrame
public static void main(String argv[])
    JFrame test = new JFrame("nuts");
    test.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    test.setSize(700, 700);
    Container content = test.getContentPane();
    test.setVisible(true);
    test.setAlwaysOnTop(true);
    // create object called 'maze' here
    maze.paint(content.getGraphics());
}I don't mean to be rude or anything; nor do I rightly understand what I've done wrong. I'm not trying to leech off anyone; I've honestly tried to figure this out, and I can't. So I'm really hoping someone can please help me. Thank you!

HOST ROUTING TABLE IS EMPTY please HELP

HELLO THERE PLEASE HELP ME , MY HOST ROUTING TABLE IS EMPTY
WHAT DO I DO NOW?

Hi and Welcome to the Community!!
With a strong carrier network signal (not WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Resend Service Books
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Batt Pull Reboot
With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support...it is, after all, your carrier network that must populate these items to your BB.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

BDC - table control - experts please help

Hi experts,
Please help. I am in need of your help.
I am working with BDC and I have a table control in one of the screen. Table control has a check box in the first column. While recording how I entered the data is : I select the check box in a row, enter two values in next two columns of that row and then hit enter then the other columns in that row turn from grey to white (initially these columns are greyed out).
NOw in BDC when I run my session in foreground, I am able to check(select) the check box and enter the values in next two columns and then I have a Enter OKCODE. But when I hit enter it is not able to recognize the row and its unable to turn the greyed out columns in that particular row to white.
Is there a way to specify in my program that I am hitting enter in one particular row.
Please help. Let me know if something is not clear. Very urgent . Pleasee respond. Thanks

Hi Rich,
Thanks for the replies. I will try that. I got one more doubt. While manually creating the recipes using C201, there is a screen Recipe header. When I record this transaction, I see a different screen for the Recipe header. Fro example the screen numbers are like 4210(manual) and 4211(recording).
But my problem is there are two fields which are missing in the screen which I am getting while recording C201. These two fields are present on the screen for manual creation. I need to enter those two fields while I record. But how can I do this.
Please help.

Table Editing Problems--- Please Help!!!

I have implemented a table model that adds an extra blank row . Now when
i enter some value into the first row and press enter i find that the value is lost. (the row goes blank and a new row is not added).the table model stores the new value though.
The table has 1 column and its header is set to null
here is the code
class ReportTableModel extends AbstractTableModel
     Object[][] data;
Vector rows ;
     public ReportTableModel(Vector rows) {
     this.rows = rows;
     setTableData();
     public int getColumnCount() {
               return 1;
     public int getRowCount() {
return rows.size()+1;
     public String getColumnName(int col) {
               return null;
     public boolean isCellEditable(int row,int col)
               return true;
     public Object getValueAt(int row, int col) {
          if (row == 0)
               return "";
          return data[row][col];
     public Class getColumnClass(int col) {
               return "".getClass();
     public void setValueAt(Object value, int row, int col) {
               data[row][col] = value.toString();
               rows.add(value.toString());
               setTableData();
     public void setTableData() {
data = new Object[rows.size()+1][1];
     for (int i=0,k=1; i < rows.size(); k++,i++) {
               data[k][0] = rows.get(i).toString();
               this.fireTableDataChanged();
Please help!!!!
Thank you,
Phani Kanuri

Do you add the new table to the scrollpane? Generally, it is wise to use table in constructor of JScrollPane.
JScrollPane jsp = new JScollPane(myTable);
// assuming myTable has been instantiated already
Cheers
DB

FrameMaker Table of Contents TOC Help Needed

I am working on a book using Frame Maker 8 and I am trying to generate a table of contents for the first time.
The book has several chapters, and I am able to generate a TOC with the Chapter titles without a problem.
Within the chapters, there are outlines. When I generate the TOC with the Heading1Start and Heading1 (marked with roman numerals in the body text), it works fine too.
But then when I add the Heading2Start and Heading 2 (marked with capital letters A, B, C in the body text), it generates the TOC list with only the headings and page numbers but without the capital letters for the paragraph numbers.
Basically, I'm getting something that looks like this:
Chapter 1 ....... 7
I. Overview ... 13
Introduction 13
when what I need is this:
Chapter 1 ....... 7
I. Overview ... 13
A. Introduction 13
How do I fix this?
I apologize if this is a simple topic of if the answer is elsewhere. I searched for an answer in a few places but did not find one.

have you used the <$paranum> building block on your TOC reference page?
I explain this and other building blocks on p.372 of my book. The <$paranum> functionality is the same in FM11 as in FM8.
-Matt
Matt R. Sullivan
co-author Publishing Fundamentals: Unstructured FrameMaker 11
P: 714.798.7596 | C: 714.585.2335 | [email protected]
@mattrsullivan LinkedIn facebook mattrsullivan.com

How to maintain entries in table T158G? Please help!

Hi Experts,
    We want to maintain new movement type entries in the table T158.
    How do we maintain entries in this table? is there any tcode or FM to do that?
    Please help.
Thanks
Gopal

Hello Gopal,
You should go through the transaction OMJJ by creating a new movement type as copy from a standard movement.
Table T158G contains which transactions can be assigned to BAPI_GOODSMVT_CREATE.
Each transaction has a GM code (assign code) for BAPI_GOODSMVT_CREATE.
With this method, the system does not support goods movements that are initiated by other application components via BAPI.
I hope this information helps you.
Best Regards,
Fábio Almeida
MM Support Consultant

Pivot table problem. Please help me create this report

Hi friends..I'm new to OBIEE. We can create the grand total column in pivot table. I need grand total as well as Grand average. How can I create a new column in pivot table that is same as grand total but calculates average.
My table structure is like this.
Facility......Date........totaldays
A..........01/01/08......210
B..........01/01/08......215
C..........01/01/08......917
A..........02/01/08......211
B..........02/01/08......211
C..........02/01/08......911
A..........03/01/08......210
B..........03/01/08......215
C..........03/01/08......917
I need the report like this..
Facility.....01/01/08......02/01/08....03/01/08...Total....AVG
A...............210.............211............210.....631......210.3
B...............215.............211............215.....641.....213.6
C...............917.............911............917.....2745....915
For this report..I created pivot table but I'm not able to calculate the average..
Can you please help..I'm new to OBIEE...
Thanks in advance

Please change your username....
Here is what you need to do...
1) In the Pivot Table View, click on the Measures column and select New Calculated Item.
2) In the pop-up window complete as follows:
Name: type "Total Average"
Function: Select "Average" from the drop-down window.
Click on the values in the right pane that you wish OBI to calculate the average for.
3) Click "OK."
You now have another column that is the average of the values in each row.

How to configure incoming email to SharePoint List? Facing problem please help.

Hi,
I am beginner in SharePoint 2013 Administration. I am working with Migrated system from MOSS 2007 to sharePoint 2013.
I am facing issue with SharePoint 2013 List incoming email setting. It was working in MOSS 2007 system.
I did:
Whenever I am trying to specify list (incoming) email id and submit it. I am getting following error.
"Unable to assign this e-mail address to the list, because the address is in use."
When Users are sending email to list they are getting "Undelivery" notification.
Please help.
Thanks,
Rajat

Hi Rajat,
There might be below options you can try to resolve the issue.
1. There is a bug that sometimes causes this issue. If you update the description of the list and try again, it may resolve your problem.
2. If you have SharePoint setup to create contacts in AD, have you verified there is not a lingering AD contact with the e-mail address? If so, you may need to delete it so the address is available in AD.
Also please check whether other document library is using the same email id for incoming email setting or not.
see below thread for more on this.
https://social.technet.microsoft.com/Forums/sharepoint/en-US/ac58b52c-aafd-49c4-b68d-c1d1802bde27/unable-to-assign-this-email-address-to-the-list-because-the-address-is-in-use?forum=sharepointadminlegacy
Regards
Soni k

Mail spinning, won't delete, "reading table of contents", etc. help?

First off, forgive my un-tech-ness.
I recently went away and before I left I
set my Mail Prefs to disable "remove
copy from server" since I would be using
a different computer and didn't want to
risk losing any mail. Was able to retrieve my
mail remotely with no problem. However, when I
returned home, even though I immediately changed
the preferences back to remove the copies from the
server right away, each message left on the server was loaded into my inbox three or four times. Then the fun started - spinning ball, messages like "reading table of contents","copying 48 out of 50" "opening mailbox". I moved the duplicates to the trash and even deleted them from trash,but then I had to force quit so when I opened Mail the
next time, same problems with hanging up and duplicate
messages all still there. Oddly (maybe not, I don't know
enough to know what's odd-) I can receive and send mail with no problem. I have to force quit every time. I tried moving MessageRules.plist to Desktop as suggested in another post, but no luck.
Thanks for any help anyone out there can offer.

Not sure, but the mailbox appears to have become corrupt (maybe “overstuffed”, see below).
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all the filesystem issues, if any, and ensuring that there’s enough space available on the startup disk (a few GB, plus the space needed to make a copy of Inbox), try this:
1. Quit Mail if it’s running.
2. In the Finder, go to ~/Library/Mail/POP-username@mailserver/.
3. Locate INBOX.mbox and move it to the Desktop.
4. Open Mail. A new empty INBOX.mbox will automatically be created within the account folder, and this will allow you to continue using Mail normally while trying to solve the problem.
Although INBOX.mbox appears to be a file, it’s actually a special kind of folder (a package) that contains several files. Ctrl-click on INBOX.mbox and choose Show Package Contents from the contextual menu to see the files it contains. Of these files, mbox is the most important and is where all your messages are stored. What’s the size of that file? Depending on its size, you may or may not be able to directly import it back into Mail in the next step.
An Incoming_Mail file may also be present, in which case it might contain messages that Mail couldn’t transfer to mbox. Incoming_Mail is also a standard mbox file like mbox proper, just named differently, and can be imported back into Mail in the same way.
5. In Mail, do File > Import Mailboxes and follow the instructions to import the INBOX.mbox that’s on the Desktop. I’m not sure what the import options available in Mail 1.x are, but you should choose Other / Standard mbox or something like that, so that Mail looks at the mbox file only (and Incoming_Mail, if present) and ignores the other files in the package.
If Mail doesn’t let you select INBOX.mbox in step 5 because it’s a package instead of a plain folder, rename INBOX.mbox to just INBOX (i.e. remove the .mbox suffix) so that it becomes a normal folder, and try again. You cannot do this directly in the Finder because removing a suffix by normal means causes the Finder to hide the suffix instead of renaming the file. To remove the suffix from the name, you must do File > Get Info (⌘I) on the file and change the name there.
Do with the imported mail whatever you wish. You may move the messages anywhere you want and get rid of the imported mailboxes afterwards, but take a look at the following article first:
Overstuffed mailbox is unexpectedly empty
If all is well and you don’t miss anything, the files on the Desktop can be deleted, although you may want to keep them for a while, just in case.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder (i.e. /Users/username). Hence, ~/Library is the Library folder within the user’s home folder (i.e. /Users/username/Library).

Public Synonyms for Nested Tables - Insertion Problem - Please Help!!!!!

Hi,
we are facing a problem during implementation. Our DB set up
is , we will be having two schema named OWNR and COPY.
In the schema, OWNR we have to create all the tables,
types,procedures, packages and obj.....This schema will have
both DDL and DML privileges.
In the schema, COPY we are not supposed to create any tables,
objects. We have to create public synonyms for all the tables,
types, procedures... in OWNR and grant ALL privilege to the
schema COPY.The schema, COPY will have only DML privileges.
The problem is we have some nested tables in our application.
When I try to insert into the synonym which is created for the
nested table, it is not allowing me to insert..The whole
implementation is stucked..Please help.The scripts are given
below.......
We have a type name SITA_ADDRESS_TY which is used by the nested
table SITA_ADDRESSES_NT.Script used for creating the Type,Nested
table,Table, Public Synonym and granting all privilege to these
types and tables are
CREATE OR REPLACE TYPE SITA_ADDRESS_TY AS OBJECT (
SITA_ADDRESS VARCHAR2(10),
REMARKS VARCHAR2(100)) ;
PROMPT SITA_ADDRESSS_NT...
CREATE OR REPLACE TYPE SITA_ADDRESSES_NT AS TABLE OF
SITA_ADDRESS_TY ;
Using this nested table we have created the table,
UMS_SITA_ADDRESS
CREATE TABLE UMS_SITA_ADDRESS (
COMPANY_CODE VARCHAR2 (6) NOT NULL,
AIRLINE_CODE VARCHAR2 (6) NOT NULL,
DESTINATION VARCHAR2 (6) NOT NULL,
SITA_ADDRESS SITA_ADDRESSES_NT)
TABLESPACE EKUMDAT
PCTFREE 5
PCTUSED 40
INITRANS 1
MAXTRANS 255
STORAGE (
INITIAL 64K
NEXT 64K
PCTINCREASE 0
MINEXTENTS 1
MAXEXTENTS 505
FREELISTS 1 FREELIST GROUPS 1 )
NOCACHE
NESTED TABLE SITA_ADDRESS STORE AS UMSNT_SITA_ADDRESS ;
PROMPT SYNONYM SITA_ADDRESS_TY...
CREATE PUBLIC SYNONYM SITA_ADDRESS_TY FOR SITA_ADDRESS_TY
PROMPT SYNONYM SITA_ADDRESSES_NT...
CREATE PUBLIC SYNONYM SITA_ADDRESSES_NT FOR SITA_ADDRESSES_NT
PROMPT UMS_SITA_ADDRESS...
CREATE PUBLIC SYNONYM UMS_SITA_ADDRESS FOR UMS_SITA_ADDRESS
Granting Privileges
PROMPT SITA_ADDRESS_TY...
GRANT EXECUTE ON SITA_ADDRESS_TY TO COPY
PROMPT SITA_ADDRESSS_NT...
GRANT EXECUTE ON SITA_ADDRESSES_NT TO COPY
PROMPT UMS_SITA_ADDRESS...
GRANT ALL ON UMS_SITA_ADDRESS TO COPY
When I connect to copy and desc UMS_SITA_ADDRESS, the structure
is
SQL> desc ums_sita_address
Name Null? Type
COMPANY_CODE NOT NULL VARCHAR2(6)
AIRLINE_CODE NOT NULL VARCHAR2(6)
DESTINATION NOT NULL VARCHAR2(6)
SITA_ADDRESS
OWNR.SITA_ADDRESSES_NT
Why is it so??. Even though I have a synonym for
SITA_ADDRESSES_NT, it is not referencing the synonym but instead
refer the OWNR.SITA_ADDRESSES_NT
Because of this when I try to insert into ums_sita_address(in
schema COPY), it is giving the following error,
SQL> insert into ums_sita_address values
('EK','EK','DXB',SITA_ADDRESSES_NT());
insert into ums_sita_address values
('EK','EK','DXB',SITA_ADDRESSES_NT())
ERROR at line 1:
ORA-00932: inconsistent datatypes
But when the same connect to OWNR and try to insert with the
same stmt, it is inserting...
Our middle tier can connect only to COPY schema alone..Is there
anything to be done in the DBA side to achieve this??.
Please help from your valuabe experience...Or can you ask your
collegues if they have got a soln to this probs..We are stucked
with this...
Thanks
Priya

Hi
I am not sure but maybe you need to use this command:
SQL> insert into ums_sita_address values
('EK','EK','DXB',SITA_ADDRESSES_TY());
SITA_ADDRESSES_TY() instead SITA_ADDRESSES_NT
Regards

Updating data in a table...please help

Hi,
I'm having a problem with the following code..
OracleTransaction myOracleTransaction = null;
OracleCommand myOracleCommand = conn.CreateCommand();
myOracleCommand.CommandText = "UPDATE conturi_curente set cod_cont=12 where cod_cont=100000;";
try
myOracleTransaction = conn.BeginTransaction();
int x = Int32.Parse(lstBoxConturiCurente.SelectedItem.ToString());
MessageBox.Show(x + "");
// string cmdQuery = "UPDATE conturi_curente set cod_cont=12 where cod_cont=100000;";
myOracleCommand.ExecuteNonQuery();
myOracleTransaction.Commit();
catch (Exception exc)
MessageBox.Show(String.Format("{0}\r\n{1}", exc.Source, exc.Message));
and I get the message "ORA-00911 Invalid character", and I have no idea what the problem is..
Please help...I am new at working with ODP...and there are very few examples on the net..
thank you.

remove semicolon (;) from your query command text

Stuck in IDCS4 Table H*ll--Please Help

I'm working on updating a parts catalog for my company (800+ pages) and it's my first big project using IDCS4. We've separated each section into an individual document (most between 50-80 pages, but a couple of the sections are 100+ pages).
Due to the nature of the project, I've attempted to make my documents as flexible as possible. Over the next few years we will be inserting new information at different places in the catalog, as we begin to carry new items. Because of this possibilty, the current information for each section is placed in an single table that overflows from the first page through the last page of that document.
The problem I keep running into, is that the table rows for different parts of the same document have to be formatted differently to achieve a consistent appearance. There are a few parts that have additional information that requires splitting and/or merging table cells.
Here are a few issues I've come across:
* When I try to Shift + drag a cell border, ID will not allow me to drag it past the threshhold of another cell in a higher or lower row. For example, I have a 3 inch cell in Row 2 of my document that begins at 0" and ends at 3". Further down at row 7, I have divided the 3" row vertically. The right half of the divided cell has been merged to the adjacent cell (to the right). When I try to drag the left wall of this cell toward the left, ID won't let me drag it past the 3" mark on the ruler (in fact, it stops about 1/16" short). Is there a way to override this and freely drag the cell wall to whatever size I want it to be?
* My other issue is attempting to paste rows from one ID document to another. Occasionally, ID allows me to do it, but it plays heck with my formatting when it does. Most times, even when the rows seem to be right at or very close to the same dimensions, the Paste function is not available after I Cut or Copy the rows from the older document.
Can anyone provide advice/solutions or even explain to me that I'm going about this all wrong, or have I come across an inherent weakness of InDesign's capabilities. I understand that an application that does every single thing you'll ever want or need isn't out there, but it seems like it's those things I want or need most that ID refuses to do.
Thanks in advance!
RW

Thanks for all of your help. I checked out catalog plugins and downloaded a couple of the trial versions. They seem to be a great tool and something I'll probably pursue in the future. Unfortunately, their parameters weren't compatible with the amount of work I've already put into this project and in the interest of time-saving, I'm going to pursue another path for this version of the catalog so I can take my time working on the prep it would take make the most of the catalog plugins.
I did some homework on the linked text frames solution and have proceeded down that path. Due to some of the formatting (some of the pages were a lot more difficult than the sample I uploaded), I'm still using tables to preserve a consistent look, but I've broken down each product section into a separate table (of no more than 20-30 product listings per table). I don't know why that didn't occur to me earlier, I guess I was in the dark about the reflow feature that keeps objects flowing consecutively.
One other problem I'm having that I haven't found a suitable answer to: When pasting rows from one table to another, most help databases I've seen praise the flexibility of InDesign to copy from one table and *as long as there are enough rows to add the new info*, pasting from one table to another is a snap. However, I've found limited success with this feature. I'm not sure if it has to do with my tables, some of which became very complex (through splitting and merging cells to preserve a consistent appearance throughout a section), but InDesign will allow me to cut rows from one table and insert them as a new table into a text frame; however, when I try to copy more rows from the first table (formatted the same as the first rows that I cut), the Paste feature is inactive. Other than the first series of rows being cut from one table and pasted as a new table, their is no difference between them and the next section of rows I'm attempting to add to the end of the table.
Any thoughts on the seeming inconsistency?
RW

MESSAGE REJECTED FOR SPAM OR VIRUS CONTENT-----Please Help!!

I send alot of emails for my business after a while and try to send an email I get this message
and cant send through Thunderbird,but if I log into my Go Daddy Workspace..I can send the same exact email with no problem. I can receive emails but not send them. then I wait 24 hours or so and its ok. Im also told when people try to email me sometime they get a bounce back.
How do I fix this problem? what are some solutions?
thank you in advance!
"An error occurred while sending mail. The mail server responded: AWHx1o00A4zJs2i01 :: auth :: Message rejected for spam or virus content :: Please include this entire message when contacting support :: v=2.0 cv=eqoBOPVX c=1 sm=1 p=PPS2TQdNAAAA:8 a=RBIhGjJQwpVXbUQ4VpzIqw==:17 a=zewopLiEtFcA:10 a=woXLOls9kE0A:10 a=8nJEP1OIZ-IA:10 a=by1fjShEoaihZ3t8YggA:9 a=wPNLvfGTeEIA:10 a=RBIhGjJQwpVXbUQ4VpzIqw==:117 :: 100.00. Please check the message and try again."

I suggest you contact godaddy for some support using their mail service.

Expandable list - Table of Contents - Please Help

Similar Messages

Maybe you are looking for