Experiences using the JMS Message Selector

I am using a JMS Adapter Sender Communication Channel and try to select the messages I want to consume with the Message Selector. My first attempts all failed - I am not sure if the syntax I am using is correct or if anything else has to be set up to use the Message Selector.
My sample was to enter the following into the field for Message Selector:
JMSCorrelationID = '123456789012345678901234'
I also tried the following variations:
JMSCorrelationID = "123456789012345678901234"
JMSCorrelationID = 'ID:123456789012345678901234'
JMSCorrelationID = "ID:123456789012345678901234"
but none of them were successful.
Anybody got that feature to work yet and can help me...
regards,
peter

Now I found it out finally...
JMSCorrelationID = 'ID:41727469636c655570646174656400000000000000000000'
where ID: is obviously added by JMS? XI? don't know... and the actually id is in Hex...
can anybody enlighten me on the details?
regards
Peter

Similar Messages

Trouble using JMS Message Selector and DCJMSMessageProperty0

Hello Experts!
My scenario is Mainframe => MQ => JMS Adapter => XI => SAP
My MQ channel is communicating fine to XI and I've set the JMS adapter to JMS Compliant.
I have multiple message types with consistent headers but varying data layouts that I need to route to different mapping objects. So it seems the best solution for this is JMS Message Selector based on reading a header value from one of the dynamic message properties.
I've read SAP Notes and SAP Library and SDN Wiki articles about this configuration and I think its possible.
http://help.sap.com/saphelp_nw04s/helpdata/en/10/b1b4c8575a6e47954ad63438d303e4/frameset.htm
Note 856346 - J2EE JMS Adapter: Frequently Asked Questions (FAQ)
Note 1086303 - XI JMS Adapter and IBM Websphere MQ: FAQ
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/usage%252bof%252bmessage%252bselector%252bfor%252bjms%252bsender%252badapter
My mainframe sends an MQ message that includes some extra header information like
field: ApplType VALUE: 000000002
field: ApplName VALUE: MIS056O
I configured my Communication Channel to set Adapter-Specific Message Attributes and also Additional JMS Message Properties to include ApplType and ApplName.
However, I can only see some of the standard JMS header items such as CorrelationID, none of the additional ones.
In RWB I see "JMS property 'ApplType' that corresponds to dynamic header 'DCJMSMessageProperty0' is missing from JMS message 'ID:f2f0f0f9f0f4f2f1f0f9f1f5f5f3f7f44040404040404040'; consequently it cannot be added to XI message 'e136a6e8-8580-4adc-2007-9ccab93f1ef4' as a dynamic header"
Can anyone with some experience doing this help me see if I'm missing a trick somewhere? How can I see where this information is being dropped? Could it be when MQ is handing to JMS?
Many thanks,
Aaron

After sifting through some IBM documentation I found that the PutApplName field actually maps to JMS name JMSXAppID. So after adding this to my Additional JMS Message Properties list I get the dynamic JMS message property I need for sorting out the messages.
http://publib.boulder.ibm.com/infocenter/wmqv6/v6r0/topic/com.ibm.mq.csqzaw.doc/uj25450_.htm

JMS message selector

hi there,
any one used JMS message selector field in the JMS sender adapter. I want to filter out messages that are relevant for various interfaces. where do i set the filter value. i read java docs, it says the filter is possible for message header and properties. the weblog on sdn is not exactly clear and it doesn't work either.
thx

Ya you can go ahead with it right ??? See it says you can filter on the basis of header info and its properties , so header info will have originating source info. Its worthful to use it that way . Please clarify if i am wrong , i think thats what u require filter msg on basis of interface for what you are using the adapter.
ref : http://java.sun.com/j2ee/sdk_1.3/techdocs/api/index.html
ref : http://help.sap.com/saphelp_nw70/helpdata/EN/45/20d245ceff2b35e10000000a1553f7/frameset.htm
I just tried , see if it helps , or i am wrong in getting your question
If helpful please award points
Abhishek

Weblogic Server 9.2 Crashes when using the JMS Wrapped Connection Pooling.

===== BEGIN DUMP =============================================================
JRockit dump produced after 0 days, 01:05:05 on Thu Sep 16 18:27:36 2010
Additional information is available in:
E:\obopay\servers\EWP_9.2_Domain\jrockit.4516.dump
E:\obopay\servers\EWP_9.2_Domain\jrockit.4516.mdmp
If you see this dump, please open a support case with BEA and
supply as much information as you can on your system setup and
the program you were running. You can also search for solutions
to your problem at http://forums.bea.com in
the forum jrockit.developer.interest.general.
Error Message: Illegal memory access. [54]
Exception Rec: EXCEPTION_ACCESS_VIOLATION (c0000005) at 0x0095065F - memory at 0x00740060 could not be read.
Minidump : Wrote mdmp. Size is 567MB
SafeDllMode : -1
Version : BEA JRockit(R) R27.2.0-131-78843-1.5.0_10-20070320-1457-windows-ia32
GC Mode : Garbage collection optimized for throughput
GC Strategy : Generational Parallel Mark & Sweep
: Current OC phase is: not running. YC is not running.
: GC strategy for GC 36 was genparpar
: GC strategy for GC 37 was genparpar
: GC strategy for GC 38 was genparpar
: GC strategy for GC 39 was genparpar
: GC strategy for GC 40 was genparpar
: mmHeap->data = 0x00C00000, mmHeap->top = 0x10C00000
: The nurserylist starts at 0x01BE75E8 and ends at 0x0CB52440
: mmStartCompaction = 0x00C00000, mmEndCompaction = 0x01C00000
: References are 32-bit.
CPU : Intel Pentium III/Pentium III Xeon SSE SSE2 SSE3 SSSE3 EM64T
Number CPUs : 2
Tot Phys Mem : 3451408384 (3291 MB)
OS version : Microsoft Windows XP version 5.1 Service Pack 3 (Build 2600) (32-bit)
Thread System: Windows Threads
State : JVM is running
Command Line : -Djava.library.path=E:\bea\jrockit90_150_10\bin;E:\bea\jrockit90_150_10\jre\bin;E:\bea\weblogic92\server\native\win\32;E:\bea\weblogic92\server\bin;E:\bea\weblogic92\server\native\win\32\oci920_8 -Dweblogic.management.discover=false -Dplatform.home=E:\bea\weblogic92 -Dwls.home=E:\bea\weblogic92\server -Dwli.home=E:\bea\weblogic92\integration -Dweblogic.Name=myserver -Dweblogic.management.username=weblogic -Dweblogic.management.password=weblogic -Dweblogic.ext.dirs=E:\bea\patch_weblogic901\profiles\default\sys_manifest_classpath\weblogic_patch.jar Djava.security.auth.login.config=E://workspace/Bhopal/LoginModulesConfig/ewp_loginmodules.config -Djava.naming.factory.initial.ewp.remote=weblogic.jndi.WLInitialContextFactory -Dcom.ewp.proxy.is_remote=false -Djava.naming.provider.url.ewp.remote=t3://localhost:7001 -Dweblogic.webservice.verbose=true -Dweblogic.log.Log4jLoggingEnabled=true -Dweblogic.security.SSL.ignoreHostnameVerification=true Xdebug -Xnoagent -Dcom.sun.management.jmxremote -Xms256m -Xmx1024m -Dsun.java.launcher=SUN_STANDARD weblogic.Server
java.home : E:\bea\jrockit90_150_10\jre
JAVA_HOME : <not set>
JAVAOPTIONS: <not set>
PATH : E:\bea\jrockit90_150_10\jre\bin;E:\oracle\product\10.2.0\client_1\bin;C:\Program Files\PC Connectivity Solution\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Intel\DMIX;C:\Program Files\TortoiseSVN\bin
C Heap : Good; no memory allocations have failed
StackOverFlow: 0 StackOverFlowErrors have occured
OutOfMemory : 0 OutOfMemoryErrors have occured
Registers (from ThreadContext: 0x4B29E378 / OS context: 0x4B29E764):
eax = 00740060 ecx = 00740060 edx = 45a45ba0 ebx = 08c953b8
esp = 4b29ea30 ebp = 00000000 esi = 4b29ea60 edi = 4b29efb4
es = 00000023 cs = 0000001b ss = 00000023 ds = 00000023
fs = 0000003b gs = 00000000
eip = 0095065f eflags = 00010206
Stack:
(* marks the word pointed to by the stack pointer)
4b29ea30: 00981099* 08c953b8 008ab310 4b29eb34 09e5c308 009810ea
4b29ea48: 4b29ead8 0098ecd2 4b29ea60 4b29ea90 48bd8960 48bd8960
4b29ea60: 00000001 45aa0278 45a45ba0 00000007 00000000 08c953b8
4b29ea78: 08512180 4b29ef60 00000000 09d56368 09d563b0 4b29efb4
Code:
(* marks the word pointed to by the instruction pointer)
0095062c: 5e5f0cc4 c35bc033 01b85e5f 5b000000 ccccccc3 0424448b
00950644: a5f06ca3 ccccc300 cccccccc 04244c8b 01a8018b e0830774
0095065c: 8bc88bfe* 40788301 44408b03 af0f0a75 c0830841 f8e08317
00950674: ccccccc3 cccccccc cccccccc 0424448b 00f4888b 158b0000
Loaded modules:
(* denotes the module causing the exception)
00400000-0040ffff E:\bea\jrockit90_150_10\bin\javaw.exe
7c900000-7c9b1fff C:\WINDOWS\system32\ntdll.dll
7c800000-7c8f5fff C:\WINDOWS\system32\kernel32.dll
7e410000-7e4a0fff C:\WINDOWS\system32\USER32.dll
77f10000-77f58fff C:\WINDOWS\system32\GDI32.dll
77dd0000-77e6afff C:\WINDOWS\system32\ADVAPI32.dll
77e70000-77f02fff C:\WINDOWS\system32\RPCRT4.dll
77fe0000-77ff0fff C:\WINDOWS\system32\Secur32.dll
77c10000-77c67fff C:\WINDOWS\system32\MSVCRT.dll
76390000-763acfff C:\WINDOWS\system32\IMM32.DLL
00820000-00a9cfff *E:\bea\jrockit90_150_10\jre\bin\jrockit\jvm.dll
76b40000-76b6cfff C:\WINDOWS\system32\WINMM.dll
71ab0000-71ac6fff C:\WINDOWS\system32\WS2_32.dll
71aa0000-71aa7fff C:\WINDOWS\system32\WS2HELP.dll
7c340000-7c395fff E:\bea\jrockit90_150_10\bin\MSVCR71.dll
5dac0000-5dac7fff C:\WINDOWS\system32\rdpsnd.dll
76360000-7636ffff C:\WINDOWS\system32\WINSTA.dll
5b860000-5b8b4fff C:\WINDOWS\system32\NETAPI32.dll
76bf0000-76bfafff C:\WINDOWS\system32\PSAPI.DLL
6d700000-6d70bfff E:\bea\jrockit90_150_10\jre\bin\verify.dll
6d370000-6d38cfff E:\bea\jrockit90_150_10\jre\bin\java.dll
6d2f0000-6d2f7fff E:\bea\jrockit90_150_10\jre\bin\hpi.dll
6d720000-6d72efff E:\bea\jrockit90_150_10\jre\bin\zip.dll
6d520000-6d527fff E:\bea\jrockit90_150_10\jre\bin\management.dll
6d530000-6d542fff E:\bea\jrockit90_150_10\jre\bin\net.dll
71a50000-71a8efff C:\WINDOWS\system32\mswsock.dll
662b0000-66307fff C:\WINDOWS\system32\hnetcfg.dll
71a90000-71a97fff C:\WINDOWS\System32\wshtcpip.dll
41c00000-41c26fff C:\WINDOWS\system32\DNSAPI.dll
41c30000-41c37fff C:\WINDOWS\System32\winrnr.dll
41c40000-41c6bfff C:\WINDOWS\system32\WLDAP32.dll
41c80000-41c85fff C:\WINDOWS\system32\rasadhlp.dll
68000000-68035fff C:\WINDOWS\system32\rsaenh.dll
769c0000-76a73fff C:\WINDOWS\system32\USERENV.dll
438b0000-438b8fff E:\bea\jrockit90_150_10\jre\bin\nio.dll
41ba0000-41ba9fff E:\bea\jrockit90_150_10\jre\bin\jmapi.dll
41bb0000-41bbdfff E:\bea\weblogic92\server\native\win\32\wlfileio2.dll
43ce0000-43cf8fff C:\WINDOWS\system32\iphlpapi.dll
43d10000-43d27fff C:\WINDOWS\system32\MPRAPI.dll
77cc0000-77cf1fff C:\WINDOWS\system32\ACTIVEDS.dll
43d30000-43d54fff C:\WINDOWS\system32\adsldpc.dll
43d60000-43d70fff C:\WINDOWS\system32\ATL.DLL
43d80000-43ebcfff C:\WINDOWS\system32\ole32.dll
43ec0000-43f4afff C:\WINDOWS\system32\OLEAUT32.dll
43f50000-43f5dfff C:\WINDOWS\system32\rtutils.dll
71bf0000-71c02fff C:\WINDOWS\system32\SAMLIB.dll
43f60000-44052fff C:\WINDOWS\system32\SETUPAPI.dll
44060000-44064fff E:\bea\weblogic92\server\native\win\32\wlntio.dll
44540000-44545fff E:\bea\jrockit90_150_10\jre\bin\rmi.dll
4d010000-4d122fff E:\bea\jrockit90_150_10\jre\bin\dbghelp.dll
"[STANDBY] ExecuteThread: '21' f" id=87 idx=0xf0 tid=4208 lastJavaFrame=0x4B29EB4C
Stack 0: start=0x4B260000, end=0x4B2A0000, guards=0x4B263000 (ok), forbidden=0x4B261000
Thread Stack Trace:
at _mmGetPossibleMovedObjectSize+15()@0x0095065F
at _refIterInit+393()@0x00981099
at _refIterInit+474()@0x009810EA
at _trProcessLocksForThread+66()@0x0098ECD2
at _javalockCouldBeLock+1047()@0x008AB417
at _javalockConvertThinToFat+42()@0x008AC13A
at RJNIjrockit_vm_Locks_convertThinLockedToFatLocked@8+15()@0x00986B1F
-- Java stack --
at jrockit/vm/Locks.convertThinLockedToFatLocked(Ljava/lang/Object;)V(Native Method)
at jrockit/vm/Locks.createMonitorAndConvert(Ljava/lang/Object;Z)Ljrockit/vm/ObjectMonitor;(Unknown Source)
at java/lang/Object.wait(J)V(Native Method)
at java/lang/Object.wait(Object.java:474)
at weblogic/common/CompletionRequest.getResult(CompletionRequest.java:109)
^-- Holding lock: weblogic/common/CompletionRequest@0x09E5C2A8[thin lock]
at weblogic/store/gxa/internal/GXATransactionImpl.commitStoreIO(GXATransactionImpl.java:99)
at weblogic/store/gxa/internal/GXATransactionImpl.doOperationCallbacks(GXATransactionImpl.java:215)
at weblogic/store/gxa/internal/GXAResourceImpl.commit(GXAResourceImpl.java:1448)
at weblogic/transaction/internal/XAServerResourceInfo.commit(XAServerResourceInfo.java:1333)
at weblogic/transaction/internal/XAServerResourceInfo.commit(XAServerResourceInfo.java:577)
at weblogic/transaction/internal/ServerSCInfo.startCommit(ServerSCInfo.java:514)
at weblogic/transaction/internal/ServerTransactionImpl.localCommit(ServerTransactionImpl.java:1993)
at weblogic/transaction/internal/ServerTransactionImpl.globalRetryCommit(ServerTransactionImpl.java:2658)
at weblogic/transaction/internal/ServerTransactionImpl.globalCommit(ServerTransactionImpl.java:2580)
at weblogic/transaction/internal/ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:278)
at weblogic/transaction/internal/ServerTransactionImpl.commit(ServerTransactionImpl.java:227)
at weblogic/deployment/jms/WrappedTransactionalSession.delistFromTransaction(WrappedTransactionalSession.java:258)
^-- Holding lock: weblogic/deployment/jms/PooledSession_weblogic_jms_client_JMSXASession@0x09D56368[thin lock]
at weblogic/deployment/jms/WrappedMessageProducer.send(WrappedMessageProducer.java:149)
at com/obopay/jms/helper/BaseQueueHelper.sendMessage(BaseQueueHelper.java:107)
The above is the jrockit crash dump file..
I am using the JMS Wrapper Connection Poooling provided by Weblogic. When i use Jmeter and do the load testing for around 10 users, the server gets crashed.
I doubt something is going wrong with the Weblogic JMS Connection Pooling, please help me..

The problem doesn't look like it has anything to do with wappers per se. The stack indicates that the JVM died when the persistent store tried to invoke a standard Java synchronize operation. JVM crashes need to be analyzed by a JVM expert, so I second the suggestion to solicit help from JVM experts and/or filing a case with customer support. In the mean-time, you can probably work-around the issue by either (A) ensuring you have a recent version of the JVM installed, or (B) temporarily switching to the Sun JVM.
Regards,
tom
Edited by: TomB on Sep 17, 2010 2:33 PM

Weird things when persisting the jms messages of topic in the wls9?

I am testing the store of the jms messages in wls9.
          But when i sent a topic message to the topic, it seems that the message cannot be stored to the persistent stores.
          The things were that:
          when i send a message of queue and refreshed the page of console of wls9.I saw the number changed in :"Home > Summary of Persistent Stores > exampleJDBCStore "-Monitoring-Statistics,the "Create Count" had increased.
          But when i use the topic message, the "Create Count" never changed.
          Anybody can tell me why?
          Is the topic message cannot be stored in persistent stores, or others ?
          thx and rgds.

Topic messages are not persisted unless both the publisher qos is persistent and there are existing durable subscribers. Otherwise, there is no need to persist them. Do you have any durable subscribers?
          Tom

In yahoo mail, I cannot use the instant message or SMS features after upgrading to the latest version of fire fox.

I'm unable to use the Instant message or SMS features within my yahoo email account. I've tried re-installing a new version of fire fox- ( had to use internet explorer to get online , I am able to use all of yahoos features including email messenger in internet explorer but I prefer fire fox) - still re installing fire fox did not solve the problem.

Hi,
It has been solved in Firefox 10 which is due for release in the next few days. In the meantime you can also try Firefox 10 beta: https://www.mozilla.org/en-US/firefox/channel/
Please see [https://bugzilla.mozilla.org/show_bug.cgi?id=713014 this] for the details. Comment 7 has a workaround for Firefox 9 that is applicable to the SMS window as well. You may have to toggle between the two options.

Using the same Message Type

Is it possible to use the same Message Type in several Message Interfaces?
I have BPM which is using AbstractInterface.
I created this interface based on my Message Type.
I have got mapping exeption. Maybe it is because of using the same message type.

> Is it possible to use the same Message Type in
> several Message Interfaces?
sure!
> I have got mapping exeption. Maybe it is because of
> using the same message type.
I don't think so.
Stefan

Using the JMS API in Java EE Applications

Hello to all,
this is some sort of theoretical question.
I been reading the JMS documentation for a while.
1.I could not understand what this statement means :
>
This section describes the ways in which using the JMS API in enterprise bean applications or web applications differs from using it in application clients.
2. What is the difference to use the JMS in java EE web orEJB container and application client ?
Thanks.

peterwkc wrote:
Hello to all,
this is some sort of theoretical question.
I been reading the JMS documentation for a while.
1.I could not understand what this statement means :
>
This section describes the ways in which using the JMS API in enterprise bean applications or web applications differs from using it in application clients.
What a developer is allowed to do is different depending on whether they are writing code to run in a container or not. The container already provides lots of services so some code you would write for outside a container is not needed when you write for a container. There are APIs that you are not allowed for in container code if you want to adhere to the spec.
>
2. What is the difference to use the JMS in java EE web orEJB container and application client ?
Thanks.Read more of that document to find out the differences. Application components in Web/EJBs must not create more than one active session per connection while application clients are allowed to do so.

Why am I unable to use the text message feature on my Honda CRV with my iphone 6?

Am I unable to use the text messaging feature on my 2014 Honda CRV with my Iphone 6?

mspacmn wrote:
Am I unable to use the text messaging feature on my 2014 Honda CRV with my Iphone 6?
Yes, you are unable to use text messaging feature with your iPhone.
-> http://owners.honda.com/vehicles/information/2014/CR-V/features/SMS-Text-Message -Function/3
"The system is currently compatible with select Blackberry® phones with Bluetooth"

JMS Message Selector on Message Payload

Hi,
I have a requirement where in;
A JMS adapter consumes messages from an AQ JMS Topic. We need to make selective dequeue from the Topic. Is that possible to make use of the message selector option on the 'message payload'?
Message selector works on JMS Header and Properties as far as I know.
Any insight on this would be of great help :-)
Thanks,
Manoj Nair.

It's like almost a month to get a response for such a generic JMS functionality. Looks like the Oracle SOA user base is really low. Anyone with a working example reference.
Thanks

OSB JMS Message Selector / Filter

HTTP PS and JMS BS puts messages on WLS JMS Queue. We need consume some messages from the Queue based on payload content since interfaces for other messages may go Live in next year.
JMS Message look like
<Schools>
<School>
<Id></Id>
<ServiceArea>100</ServiceArea>
<Type></Type>
</School>
</Schools>
We need to consume messages where ServiceArea = 100.
Can you advise how to consume messages where ServiceArea = 100 ?
I would appreciate your help.
Thanks in advance.
Kiran
Edited by: 844345 on Mar 14, 2011 5:02 PM

JMS message selector on message payload fields is not recommended and it will have performance implications. Instead you can design this in either of the 2 ways below
1 - Modify the HTTP PS which publishes the message to set the JMSCorrerlationID header ( or any othe custom JMS property) with the value of Service Area. You can achieve this using Transport Header action in HTTP PS route node.
For the JMS consumer proxy set a message selector on the JMS transport page to filter only messages belonging to this service area.
2. Let the HTTP PS continue publishing all messages to the output queue. Have a new component in your design called a 'disaptcher' which reads all the message from the output queue, check service area tag and route messages belonging to particular area to an area specific queue. Have your jms consumer specific for service area 100 to listen to only this Area specific queue.

Using Weblogic jms message id for unique id

Hi All,
We have a requirement to generate random unique id for each message processed by the application. We are planning to leverage weblogic jms message id for this purpose rather than building our own application logic for this purpose . Will there be any issue adopting this ? We think weblogic jms message id will be unique across the cluster as id is a hash of current timestamp + jms server name + wl server name + ?? .. is this correct ?
TIA
Atheek

Hi Atheek,
It depends on what are you planning to do with that id, as there are some gotchas on Weblogic's JMSMessageID generation.
I guess the msg id could be considered statiscaly unique as Tom says, but the msg id will change during the livecycle of your message, surprise! (yea, the JMS spec allows the JMS server to modify the msg ids).
So if you want to use that id to correlate messages id, or to group info related to one message, using JMSMessageID could be a problem.
You can consider to generate a UUID, using Java 1.5 support (java.util.UUID) or a external library (JUG http://jug.safehaus.org for instance), and attach that id as a JMSCorrelationId or a user defined property.
Hope this helps

Having issue opening the JMS message

HI I am having issue while monitorig the JMS queue thorugh Weblogic Console (9.3). Its throwing me below exception though i recycle the entire domain and it still gives me the below exception. Same domain has two more other JMS module which has some queue and that work fine.
Error opening /jsp/jms/message/JMSMessageTable.jsp.
The source of this error is java.lang.NullPointerException at weblogic.jms.common.JMSMessageOpenDataConverter.createCompositeData(JMSMessageOpenDataConverter.java:43) at weblogic.messaging.kernel.runtime.MessageCursorDelegate.getCompositeDataArray(MessageCursorDelegate.java:141) at weblogic.messaging.kernel.runtime.MessageCursorDelegate.getNext(MessageCursorDelegate.java:60) at weblogic.messaging.kernel.runtime.MessageCursorDelegate.getItems(MessageCursorDelegate.java:105) at weblogic.messaging.runtime.CursorRuntimeImpl.getItems(CursorRuntimeImpl.java:72) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at weblogic.management.jmx.modelmbean.WLSModelMBean.invoke(WLSModelMBean.java:443) at com.sun.jmx.mbeanserver.DynamicMetaDataImpl.invoke(DynamicMetaDataImpl.java:213) at com.sun.jmx.mbeanserver.MetaDataImpl.invoke(MetaDataImpl.java:220) at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:815) at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:784) at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.invoke(WLSMBeanServerInterceptorBase.java:153) at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.invoke(WLSMBeanServerInterceptorBase.java:153) at weblogic.management.mbeanservers.internal.SecurityInterceptor.invoke(SecurityInterceptor.java:443) at weblogic.management.mbeanservers.internal.AuthenticatedSubjectInterceptor$10.run(AuthenticatedSubjectInterceptor.java:377) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363) at weblogic.management.mbeanservers.internal.AuthenticatedSubjectInterceptor.invoke(AuthenticatedSubjectInterceptor.java:375) at weblogic.management.jmx.mbeanserver.WLSMBeanServer.invoke(WLSMBeanServer.java:310) at javax.management.remote.rmi.RMIConnectionImpl.doOperation(RMIConnectionImpl.java:1408) at javax.management.remote.rmi.RMIConnectionImpl.access$100(RMIConnectionImpl.java:81) at javax.management.remote.rmi.RMIConnectionImpl$PrivilegedOperation.run(RMIConnectionImpl.java:1245) at java.security.AccessController.doPrivileged(Native Method) at javax.management.remote.rmi.RMIConnectionImpl.doPrivilegedOperation(RMIConnectionImpl.java:1348) at javax.management.remote.rmi.RMIConnectionImpl.invoke(RMIConnectionImpl.java:782) at javax.management.remote.rmi.RMIConnectionImpl_WLSkel.invoke(Unknown Source) at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589) at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:479) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363) at weblogic.security.service.SecurityManager.runAs(Unknown Source) at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:475) at weblogic.rmi.internal.BasicServerRef.access$300(BasicServerRef.java:59) at weblogic.rmi.internal.BasicServerRef$BasicExecuteRequest.run(BasicServerRef.java:1016) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200) at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
Rgds
Sohail K

Hi Sohail,
JMS is a WebLogic Server component and not something directly supported in Tuxedo. If you are using the WebLogic Tuxedo Connector tBridge to access JMS queues from Tuxedo or to forward JMS queues to Tuxedo /Q, please give us the details. Otherwise I suggest you post your question to one of the WebLogic forums.
Regards,
Todd Little
Oracle Tuxedo Chief Architect

Error in using the JMS Adater using weblogic queue

I am using weblogic queue in jms adapter to queue the data. i configured the server.xml
     <shared-library name="oracle.weblogic" version="10.1.3">
          <code-source path="D:\product\10.1.3.1\OracleAS_5\jdk\lib\weblogic.jar"/>
     </shared-library>
I got the following error. Any Suggestions?
file:/D:/product/10.1.3.1/OracleAS_5/bpel/domains/default/tmp/.bpel_OSM_OrderRequest_2.0_c68a29fd8af11327e1a8892e8de5a6bb.tmp/Sample.wsdl [ Produce_Message_ptt::Produce_Message(orderRequestMessage) ] - WSIF JCA Execute of operation 'Produce_Message' failed due to: Could not instantiate InteractionSpec oracle.tip.adapter.jms.outbound.JmsProduceInteractionSpec due to:
     Missing class: oracle.tip.adapter.jms.outbound.JmsProduceInteractionSpec
     Dependent class: oracle.tip.adapter.fw.wsif.jca.WSIFOperation_JCA
     Loader: oracle.bpel.common:10.1.3
     Code-Source: /D:/product/10.1.3.1/OracleAS_5/bpel/lib/orabpel.jar
     Configuration: <code-source> in /D:/product/10.1.3.1/OracleAS_5/j2ee/oc4j_soa/config/server.xml
This load was initiated at orabpel.root:0.0.0 using the Class.forName() method.
The missing class is not available from any code-source or loader in the system.; nested exception is:
     oracle.classloader.util.AnnotatedClassNotFoundException:
     Missing class: oracle.tip.adapter.jms.outbound.JmsProduceInteractionSpec
     Dependent class: oracle.tip.adapter.fw.wsif.jca.WSIFOperation_JCA
     Loader: oracle.bpel.common:10.1.3
     Code-Source: /D:/product/10.1.3.1/OracleAS_5/bpel/lib/orabpel.jar
     Configuration: <code-source> in /D:/product/10.1.3.1/OracleAS_5/j2ee/oc4j_soa/config/server.xml
This load was initiated at orabpel.root:0.0.0 using the Class.forName() method.
The missing class is not available from any code-source or loader in the system.; nested exception is:
     org.collaxa.thirdparty.apache.wsif.WSIFException: Could not instantiate InteractionSpec oracle.tip.adapter.jms.outbound.JmsProduceInteractionSpec due to:
     Missing class: oracle.tip.adapter.jms.outbound.JmsProduceInteractionSpec
     Dependent class: oracle.tip.adapter.fw.wsif.jca.WSIFOperation_JCA
     Loader: oracle.bpel.common:10.1.3
     Code-Source: /D:/product/10.1.3.1/OracleAS_5/bpel/lib/orabpel.jar
     Configuration: <code-source> in /D:/product/10.1.3.1/OracleAS_5/j2ee/oc4j_soa/config/server.xml
This load was initiated at orabpel.root:0.0.0 using the Class.forName() method.
The missing class is not available from any code-source or loader in the system.; nested exception is:
     oracle.classloader.util.AnnotatedClassNotFoundException:
     Missing class: oracle.tip.adapter.jms.outbound.JmsProduceInteractionSpec
     Dependent class: oracle.tip.adapter.fw.wsif.jca.WSIFOperation_JCA
     Loader: oracle.bpel.common:10.1.3
     Code-Source: /D:/product/10.1.3.1/OracleAS_5/bpel/lib/orabpel.jar
     Configuration: <code-source> in /D:/product/10.1.3.1/OracleAS_5/j2ee/oc4j_soa/config/server.xml
This load was initiated at orabpel.root:0.0.0 using the Class.forName() method.
The missing class is not available from any code-source or loader in the system.
</summary>
</part>
-<part name="detail">
<detail>
org.collaxa.thirdparty.apache.wsif.WSIFException: Could not instantiate InteractionSpec oracle.tip.adapter.jms.outbound.JmsProduceInteractionSpec due to:
     Missing class: oracle.tip.adapter.jms.outbound.JmsProduceInteractionSpec
     Dependent class: oracle.tip.adapter.fw.wsif.jca.WSIFOperation_JCA
     Loader: oracle.bpel.common:10.1.3
     Code-Source: /D:/product/10.1.3.1/OracleAS_5/bpel/lib/orabpel.jar
     Configuration: <code-source> in /D:/product/10.1.3.1/OracleAS_5/j2ee/oc4j_soa/config/server.xml
This load was initiated at orabpel.root:0.0.0 using the Class.forName() method.
The missing class is not available from any code-source or loader in the system.; nested exception is:
     oracle.classloader.util.AnnotatedClassNotFoundException:
     Missing class: oracle.tip.adapter.jms.outbound.JmsProduceInteractionSpec
     Dependent class: oracle.tip.adapter.fw.wsif.jca.WSIFOperation_JCA
     Loader: oracle.bpel.common:10.1.3
     Code-Source: /D:/product/10.1.3.1/OracleAS_5/bpel/lib/orabpel.jar
     Configuration: <code-source> in /D:/product/10.1.3.1/OracleAS_5/j2ee/oc4j_soa/config/server.xml
This load was initiated at orabpel.root:0.0.0 using the Class.forName() method.
The missing class is not available from any code-source or loader in the system.

I am able to fix this error by copying "JmsAdapter.jar" to "applib" directory of oc4j_soa.
I was getting a new error.
+"Missing class: oracle.tip.adapter.api.TranslationAware+
+     Dependent class: oracle.tip.adapter.jms.JmsInteractionSpec+
+     Loader: global.libraries:1.0+
+     Code-Source: /D:/SOA1013/j2ee/oc4j_soa/applib/JmsAdapter.jar+
+     Configuration: <code-source> in /D:/SOA1013/j2ee/oc4j_soa/config/server.xml+
+The missing class is available from the following locations:+
+     1. Code-Source: /D:/SOA1013/bpel/lib/orabpel.jar (from <code-source> in /D:/SOA1013/j2ee/oc4j_soa/config/server.xml)+
+     This code-source is available in loader oracle.bpel.common:10.1.3."+
But managed it to fix it by copying "orabpel.jar" to "applib" directory.
We need to restart OC4J once we copy the JAR files.
regards,
S.Vasanth Kumar.

Want to use the same message filter on various computers

I have three computers all running thunderbird at different locations in the world. I am using IMAP thus I have all emails anywhere. Now I would like to run the same message filter on any of these, but I can not export/import the message filter so that I have copies of my filter. What should I do?

The file that stores your filter settings is called "msgFilterRules.dat". Each account will have its own "msgFilterRules.dat" file, stored in the "Local Directory" for the account in your profile. The Local Directory is specified at the bottom of Tools -> Account Settings -> Server Settings, right by the Browse button. The filters for Local Folders are stored in the Mail\Local Folders directory in the profile.
If you want to duplicate an accounts filters in another account you don't need to create them again. Exit Thunderbird and copy the "msgFilterRules.dat" file instead. If the account is in another profile and it uses custom headers you will also need to copy the mailnews.customHeaders setting from prefs.js.

Experiences using the JMS Message Selector

Similar Messages

Maybe you are looking for