Expired userPassword question

We are migrating from an older directory setup to 5.2 from 2005Q1. We developed a simple tool to allow a user to change their password. This tool binds to the directory as the user to verify the password and then changes the userPassword field with new data. On our current production system a user with an expired password can still change their password. On our new system (JES 2005Q1 with messaging and access manager), a user with an expired password cannot change their password. Is the behavior I see the new default for the directory server? If I can't change it is it best to catch the expired password return code and then bind with a proxy account?
Thanks.

About expired updates:
Description:
Expired software updates were previously deployable to client computers, but once a software update is expired, new deployments can no longer be created for the software updates. Expired software updates contained in active deployments continue to be available
to clients.
Operational Concerns:
Replace expired software updates when possible. When software updates become expired, Configuration Manager does not remove the software updates contained within active software update deployments. Configuration Manager continues to assess software update
compliance on expired software updates in deployments, but they are considered “not required” for reporting purposes.
http://technet.microsoft.com/en-us/library/hh848254.aspx

Similar Messages

Expired Updates Question

Hey all my awesome homies!
I have a quick question. Now let's say that I sync'ed my software updates on Patch Tuesday and I deployed them on that day, and then, let's say that on Thursday or Friday, just a couple or few days later after Patch Tuesday, I decide to run a Synchronization
again, and I see that one of the updates that I deployed has been Expired by Microsoft. Does that mean that those clients that are configured for Manual install (set for Available not Required) where the patches are sitting in Software Center where the update
binaries are in the cache will NOT install that particular Expired patch, or it will since the binary has already been downloaded and tossed in the ccmcache on the client prior the update being expired?
Thank you my SCCM friends, I appreciate your help as ALWAYS

About expired updates:
Description:
Expired software updates were previously deployable to client computers, but once a software update is expired, new deployments can no longer be created for the software updates. Expired software updates contained in active deployments continue to be available
to clients.
Operational Concerns:
Replace expired software updates when possible. When software updates become expired, Configuration Manager does not remove the software updates contained within active software update deployments. Configuration Manager continues to assess software update
compliance on expired software updates in deployments, but they are considered “not required” for reporting purposes.
http://technet.microsoft.com/en-us/library/hh848254.aspx

How I can split the integer

Hi guys,
I am beginner in java and I have an integer number . I want to divided this integer into sub section because I want to check each section separate.
Example : the credit card number
1664532112008
first '1' indicate the card type
second '664532' indecate the acount number
third 11 the month the card expired
last 2008 the year the card expired
my question is : how I can find somthing like "substring" in String class to split this integer into different fields?
Regards,

Albathan wrote:
I know the String#split But the problem with the question is
"Card Number  *numeric* characters separated by the character "All well and good, but you should be highlighting the word after numeric: characters because that's what you're dealing with here!
First and foremost, the whole card number -- numbers and characters -- is a String, no ifs ands or buts. 23-991209-304 will never aspire to be a number, nor should it. So treat it as a String, split it, and deal with the resulting String arrays as needed. Now let's look at the requirements some more, shall we?
Each block of �x� characters in the Card Number holds important data: again that pesky word "characters"
the first character signifies the type of card, and so must conform to the Card Type chosen. so you can isolate the first character as a String and translate it to a char or an int, your choice and easily deal with it, correct? Just get the 0th item in your String array and work with it.
The second block of characters holds the account number, What do you get when you add two account numbers together? Answer: nothing that makes sense. Account numbers are not numbers. You will need to accept this. Thus you can deal with String[1] easy enough.
the next two characters denote the month the card expires, OK, now this is a number. You know how to translate the String in array item [2] to become a number. Then you can deal with this.
the last four denote the expiration year. Same as above. This is a number, and you can handle this.
Payment will not be accepted if the card expires before June 2008.no problem.
and I think i should use integer because the question ask to be numericUse integers where integers are appropriate. Use strings where strings are appropriate.
what do you think?That's what I think! Good luck.

SGD Gateway refuses new connections

I have a customer using SGD 4.5 and after a gateway restart everything is working OK. Then after a period of time (sometime hours or sometime it is days) the gateway does not allow new connections. Existing connections are not impacted. Looking in the routing proxy log we see errors like:
INFO: NOT FOR PRODUCTION USE.
Jul 10, 2012 2:00:16 AM JARP main
INFO: Running...
Jul 10, 2012 6:30:51 AM proxy.Route run
INFO: Error: Route Route [From: TCP:*:443 <- SSLFilter:SGD <- SSL <- Router, To: TCP] timed out. Restart
ing.
Jul 10, 2012 8:12:07 AM proxy.Route run
INFO: Error: Route Route [From: TCP:*:443 <- SSLFilter:SGD <- SSL <- Router, To: TCP] timed out. Restart
ing.
Jul 10, 2012 11:31:51 AM proxy.Route run
INFO: Error: Route Route [From: TCP:*:443 <- SSLFilter:* <- SSL, To: TCP:localhost:8081] error. Restarti
ng.
Jul 10, 2012 11:31:51 AM proxy.Route run
INFO: Error: Route Route [From: TCP:*:443 <- SSLFilter:* <- SSL, To: TCP:localhost:8081] error. Restarti
ng.
Jul 10, 2012 11:31:51 AM async.channel.tcp.AsyncTcpChannelClient$ConnectOp run
INFO: finishConnect() exception: java.net.ConnectException: Connection refused
Jul 10, 2012 11:31:51 AM proxy.Route run
INFO: Error: Route Route [From: TCP:*:443 <- SSLFilter:* <- SSL, To: TCP:localhost:8081] error. Restarti
ng.
On running "tarantella gateway list" on the SGD server we see that certificates have expired.
They have 2 active gateways running. If we run "gateway sslcert print" on both the servers we get the following:
one server
<hostA>:/opt/SUNWsgdg/bin # ./gateway sslcert print
keytool error: java.lang.Exception: Alias <hostA> does not exist
ERROR: failed to print certificate (status 1)
on the second gateway response was clear certifcate but the date of the certificate has expired.
Questions:
1) Has someone encountered this problem? If yes ,what was the solution?
2) Is it the certificate problem an issue and if we sort it out would it solve the connections issue? Also why does this problem go away (for a while at least) after the restart of the gateway?

What is the version of jarp.jar?
cd /opt/SUNWsgdg/proxy
/opt/SUNWsgdg/java/default/bin/java -jar jarp.jar --version

Using DelayQueue with dynamically changing delay times?

Greetings all:
First-time poster, so please be gentle. :-)
I am implementing a cache timer task whose job is to removes idle elements from a cache after x time, and was considering a DelayQueue as potentially more efficient than iterating through the entire cache each time. Important point is that the delay time of elements in the queue will be dynamically changing while they're in the queue, until the point when they become idle, i.e., each time an element's content changes, its expiration time moves further out.
I went looking in the DelayQueue source (and from there to PriorityQueue) as I was interested to see how it implements its sorting mechanism, and it appears to me that it may not handle this properly. Specifically, it appears that the queue is sorted when elements are added or removed but not otherwise, so that you could end up with the head of the queue being an element that has not really expired.
Question: Has anyone used a DelayQueue for this kind of scenario, and if so, did it work as expected?
Thanks,
Brian

If you want this behaviour I suggest you look at
overriding LinkedHashMap as it has a means to
maintain sorted from most recently accessed to last
accessed.
Thus to clear it all you need to do is remove the
oldest elements.Interesting. Currently I'm using a HashMap so changing to a LinkedHashMap would require virtually no changes to existing code. It still won't quite work as-is, though, because access only gets updated on put's and remove's, whereas I would need access updated on any modification to a contained object as well. I'll think about it a bit more - thanks for the suggestion.

DHCP Required

This question is regarding DHCP required and mobile supplicants in an LWAPP architecture environment. Assume DHCP required is set to true. Assume the supplicant is powered on and receives its IP address. The client then roams to a new BSS (BSS2) in the same subnet and does a DHCP request and receives notification it can continue using the one it has leased (assume it has not expired).
Question: If the client has a BSS table and roams back to the first BSS (BSS1). The client determines that it currently has an IP from BSS2 that is in the same subnet as the previous IP it was provided from BSS1 and so chooses to use the existing IP... and not do a DHCP request.
How do the controllers and APs handle this client that they have seen on this AP before and provided it an address before?

The 5.2 WLC Config Guide is @ http://www.cisco.com/en/US/docs/wireless/controller/5.2/configuration/guide/Controller52CG.html.
Is also documented in the 7925G Deployment Guide not to enable for the voice SSID @ http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7925g/7_0/english/deployment/guide/7925dply.pdf.

HT5312 My recovery email is no longer in use, as it hasn't been used for sometime, and now seems to have 'expired', and I do not even recall being asked the security questions,so I can no longer download certain games. Please help.

I cannot download certain games because I do not recall the answers to my security questions when it asks if I am 17 years or older. In fact, I do not even recall being asked these security questions.
I tried to guess logical answers but now my iPad is threatening to lock me out. My second email is no longer in use as it has not been used for years and has seemingly expired.
Can you please help?

If you don't have access to your rescue email account, or you don't have one on your account (an alternate/secondary email address is a different setting/address), then you will need contact iTunes Support or Apple to get the questions reset (you won't be able to change/add a rescue email address until you can answer 2 of your questions)
e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then 'Forgotten Apple ID security questions'
or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
When they've been reset you can then use the steps half-way down the page that you posted from to update/add a rescue email address for potential future use

I'm trying to set up an iPad for work and the apple id I was trying to use came back expired. I set a new password and then it said it was invalid. Now I'm locked out for too many tries answering security questions that I don't remember setting up. Help!

I seem to be stuck in apple ID ****. First the password was expired only two minutes after I finished setting up the account and then the new password was invalid. I don't know what to try next but this is making me crazy. And I'm locked out for eight hours for too many attempts at answering questions that I never set up in the first place. I don't know what gives but something is way off. I need to set up this iPad for work but I can't get past the login.

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased. Some glitch occured and you have to restore/erse the iPod. Y will have to restore from an existing backup if y ohave one.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Two part question 1) what happens if you sign into messages beta on os x lion 10.7.5 after it expired? does the whole application not work or just imessage? 2) does installing messages beta on os x lion 10.7.5 delete ichat?

Two part question
1) what happens if you sign into messages beta on os x lion 10.7.5 after it expired? does the whole application not work or just imessage? can you stil use AIM, jabbar, google talk, or yahoo? if you open messages beta does it immediately tell you that messages beta expired?
2) does installing messages beta on os x lion 10.7.5 delete ichat or just transform ichat into messages beta giving the illusion that ichat is deleted?

Hi,
It was never completely clear whether it was just hidden or whether Apple ran a download page for iChat 6.
As the Download for Messages Beta was separate and "Deleted" iChat it would seem it would be another download for iChat 6.
iMessages will not function as it is only an Account type within Messages and iChat 6 does not have it.
Therefore messages on the iPhone will not sync to the Mac. (until you get Mountain Lion and Messages in that OS X version).
Mountain Lion and it's full version of Messages will not sync the iMessages that have happened in between the 14th December 2012 (end date of Messages beta) and the Install of Mountain Lion if you decide on that route.
8:51 PM Sunday; May 5, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

My security questions email has expired how do i get a new one

my security questions email has expired how do i get a new one

Click here for information. If you can't reset it through the method described in that article or by sending yourself a rescue email(it requires correctly answering two of the questions), contact the iTunes Store staff via the link in the 'Additional Information' section.
(112110)

Question about making PDF files expirable using contnet manager

Hello
I would like to know if I enable users of my website to view PDF files online can I make the PDF files using Content Server to expire once the user logs off from my website and his session end?
Thanks
Yoav

That's a fairly general question. Have you read the basic white paper on the product site: http://www.adobe.com/products/contentserver/ ?

Security questions through iPad expired time every 1 sec and i cant put them to use AppStore

I put a security questions already in my account , but when I try to use AppStore in my iPad It ask me to put moré security questions , the problem is when i try to do It every time It says the time has expired . That i should start again . I tryied several times and It seems i have only 3 secs to do It . No mater what I do the time to do It always expired. Pelase help me i cant download any app .

Why don't you just go to FIOS local office and exchange 6416 for 7216?

Question about ACS 5.1 and user account expiration

Hi All,
Is there a setting on ACS 5.1 where you can configure the user account's expiration? Speaking of users locally configured on the ACS.
If not, can you accomplish this with an external db such as MS AD? How ?
We are looking for a way to manage our guest's hotspot so what we can create temporary users without having to purchase any aditional hardware/software.
Thanks in advance,
Raga

Raga,
Here is the answer to your first questions -
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.1/release/notes/acs_51_rn.html#wp122068
As far as being able to do this in AD it is possible you can look at the following documentation which shows how to configure AD attributes, I have helped a customer retrieve the lockouttime attribute in his AD environment, I dont think this attribute is present in the 2003 DC because I was unable to replicate this attribute.
Another step would be to use useraccountcontrol -
http://support.microsoft.com/kb/305144 - if set a simple condition that if this value is 512 you can permit access, when you lock the account it will add the status of disable to the type of account if it is 512 (Normal_Account) it will equal 514. The most secure is to see what value you have for the guest account by retrieving the attribute after you create the account, create a condition that matches this account.
Let me know if this helps!
Tarik

HT5312 Guys, I have forgotten my security question answers, and the rescue email I placed in with my apple id has been closed down as well (it was a university id, when I graduated, the email service expired). I need help changing my password.

Guys, I have forgotten my security question answers, and the rescue email I placed in with my apple id has been closed down as well (it was a university id, when I graduated, the email service expired). I need help changing my password.

The Three Best Alternatives for Security Questions and Rescue Mail
    1. Use Apple's Express Lane.
          Go to https://expresslane.apple.com ; click 'See all products and services' at the
          bottom of the page. In the next page click 'More Products and Services, then
          'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
          ID security questions' and click 'Continue'.
     2. Call Apple Support in your country: Customer Service: Contact Apple support.
     3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

My cloud account expired. I don't remember securtiy questions. How to renew Cloud support

My cloud account expired. I don't remember securtiy questions. How to renew Cloud support

Hello jlemmon2778,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/ht5312
Best of luck,
Mario

Expired userPassword question

Similar Messages

Maybe you are looking for