Explore links in recursive and multithreading mode

Hi everyone.
I need a help to make this exercise:
Develop a java program that. from a web page, explore all the link in ecursive and multithreading mode.
Every thread will stop at an exploration level equal to 6. If the link was already explored the exploration
does not repeat again and the exploration level will be shown on the console.
I'd like a help at least for an initial definition.
thank you

Welcome to our community
I'm not sure I fully comprehend the issue. You are previewing. This will impose some limitations and really is only there to approximate the end user experience.
You say that if you open things outside of RoboHelp the links work fine. And this is really how the end user will be using things, no? So if it works fine in this mode I'm not understanding why there is an issue.
Out of curiosity, why PDF? You are hopefully aware that one might supply PDF only for the purposes of printing, right? Otherwise, if your end user will be expecting to click links or whatever, you should be outputting a help format. (CHM, WebHelp, FlashHelp, AIR Help, etc)
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Similar Messages

Download Links for JMS Explorer to view message and its details

Can i get the links for downloading the JMS explorer to view messages and its details on j2ee server.

I checked Hermesjms tool but found that it does not work with j2ee server.
Is there any other JMS explorer tool to view messages and its details on j2ee server specifically.

Get GPS info using Autonomous and CellSite Mode parallelly using MultiThreading

I tried to get the GPS latitude and longitude values using Autonomous and CellSite Mode parallelly using two threads, but while execution only one thread is being active and I get values from only that, the other thread doesn't return any values at all.
Is it possible to retrieve the GPS information using multiple threads running parallelly and also can I display the latitude and longitude values from the threads on the screen with less accuracy rate among the values.
Thanks in advance...

Your thread may not get noticed as it is in General Support threads. You may post your thread in Java Development to get faster response.
Ron
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

More Details about Multithreading Mode in User Management

Good morning,
we are working with Portal 7.0 on SP 14 and there is an option to activate the multithreading mode
in the User Management part of the support desk. Since this option seems to significant speed up our
login time i´am interested in more details about what is happening here. But i was unable to locate
any documentation / forum entries / blogs about it. Another point is the question if it is possible
to persist that option. After every Node / Serverrestart multithreading gets deactivated again.
Any Ideas / Links / Helps would be appreciated and points will be rewarded.
Thank you,
Marco

Hi
Here is a useful HDD password summary:
http://aps2.toshiba-tro.de/kb0/TSB6B01MC000CR01.htm
_HDD User Password and HDD Master Password:_
There are two levels of the HDD Password, the HDD User Password and the HDD master Password. If both levels of HDD Password have been registered, you can access the HDD by entering either of them. TOSHIBA Password Utility (TPU) only supports the HDD User Password. If you want to register both, open BIOS SETUP. If the HDD User Password has been registered, the HDD Master Password can not be registered
Hope this helps a little bit

Internet explorer 11 not working in app mode

Hi,
I have a Lenovo desktop computer with Windows 8.1. IE 11 worked perfectly well in both app and desktop modes but since 2-3 weeks my IE doesn't open in app mode. I think it might be linked to the update following the IE security problem.
I tried to make the change described in a previous post, namely:
Click the tools button in IE 11(IE 11 on the desktop), choose Internet
options, navigate toprograms tab, on the opening
Internet explorer, choose how you open links:
Make sure we have always in Internet explorer or Let
Internet Explorer decide selected.
BUT in my case the tools/internet option/programs tab doesn't allow me to change this parameter... it's blocked on "always in internet explorer on the desktop" mode....
it doesn't allow me to select anything else...
Is there a solution to this ? please advise.
Thanks

blocked on "always in internet explorer on the desktop" mode....
Sounds like you may have installed another browser which has set itself to be the default? In order to use MUF IE, IE insists that it be the default browser.
Robert Aldwinckle

Firefox 18.0.1 consuming excessive CPU--both in Standard and Safe Mode--when accessing Gmail

Firefox 18.0.1 consumes excessive CPU--both in Standard and Safe Modes--when accessing Gmail (in Standard Mode). CPU consumption averages around 56% on my dual-CPU, Windows 7 desktop.
The only way to stop this from happening it to open Gmail in "HTML" mode. When I open Gmail in Standard mode, a "Loading..." status shows at the top of the page. After about 30 seconds, a error window pops-up within the Gmail page saying that there is a performance problem and provides the option to load Gmail in a limited, "HTML" mode. Clicking the HTML Mode link solves the issue. I've been using Firefox for years and have never seen this issue until now.

try this link
*https://support.mozilla.org/en-US/kb/firefox-uses-too-many-cpu-resources-how-fix

Firefox 19 crashes on startup in normal and safe modes.

upon startup, ff19 crashes in both normal and safe modes. I've disabled all add ons and extensions.
XP Pro sp3.
It started crashing occaisionally, then increasingly more often, now, upon startup.
I tried reloading ff19.
I can't start ff with the -p command.
Crash ID: bp-89fc95f5-6efb-4c72-8721-fbf1b2110906
1361302409
1360392309
1358921494
1357934458
1354939166

its not correct crash id.
We're sorry to hear that your Firefox seems to be crashing when you open it. Please perform the following steps to give us a crash report ID that helps us find out more about the cause of the crash.
#Press the following shortcut to get a Run window: [Windows] + [R]. This should bring up a window that contains a text field.
#In that text field, enter %APPDATA% and press Enter. An explorer window should open.
#From that explorer window, double-click on the ''Mozilla'' folder, then double-click on ''Firefox'' and then on ''Crash reports''. Double-click on ''submitted''.
#Now, you should see a list of files that contain reports. Go to ''View'' > ''Arrange Icons by'' > ''Modified'' to get the most recent files at the top of the window.
#Open the most recent 5 files with a text editor and copy the IDs.
#Paste each ID with '''bp-''' into the reply window on the forums.
Thanks in advance!
You can find more information and troubleshooting steps in the [[Firefox crashes]] article.

How to use a single page for create and update mode.

Hi,
I need to develop a single page to be used for both create and update modes.
I am going to use a variable MODE
and i will set this in the emp summary page.
Based on the button clicked by the user i have to render the JSF page.
For tis if the user selects a perticular and cliks on update thn i will pass the empno to the next.
so there in the next i will appy a ViewCreiteria on my View Obj to fetch only that row so that only that emp will be displayed ion update mode.
This is working fione for me.
So now the issue is
when the user clicks on CreatEmp button.
i need to enable my VO for insert operations.
for this i wrote the code like this in the beforePhase event
FacesContext ctx = FacesContext.getCurrentInstance();
ValueBinding valBinding = ctx.getApplication().createValueBinding("#{data}");
BindingContext bContext = (BindingContext) valBinding.getValue(ctx);
DCDataControl dcControl = bContext.findDataControl("DataControl");
Application app = ctx.getApplication();
ApplicationModule am = (ApplicationModule) dcControl.getDataProvider();
System.out.println("After Appmodule initiation");
// get the VO reference and initiate the query
System.out.println("Before Page VO initiation");
PrismDmPageSectionViewImpl vo = (ViewImpl)am.findViewObject("View");
//ViewRowImpl row = (ViewRowImpl) vo.createRow();
/* TO CREATE AN EMPTY ROW*/
Row row=vo.createRow();
System.out.println("New Row is created");
//vo.createKey(row);
vo.insertRow(row);
vo.setCurrentRow(row);
By doing this a new empty page is rendered.
But when i fill up the values and click on ok.. i am getting the error like this..
JBO-27023: Failed to validate all rows in a transaction.
JBO-27027: Missing mandatory attributes for a row with key null of type View3
JBO-27014: Attribute Id in View3 is required
JBO-27014: Attribute PageeId in View3 is required
Please point me out where i am missing.
Thanks

Hi,
In my opinion you are over complicating things.
This is what I do for using the sme page as both create and update without all this code.
1) Create a browse page containing a an adf table with a select one component bound to your view object.
2) Create an additional edit page containing only an edit form containing fields of your view object that your users must enter in order to add or edit rows.
3) Link the pages in the JSF diagram with an "edit" navigation case from browse to edit page and a "return" navigation case from edit to browse (make sure that redirect option is NOT set on both cases)
4) Remove the submit button from the edit page and add two application module bindings for the commit and rollback operations as command buttons in the form footer facet. Make sure that both buttons has an action of return and that their disabled property is set to false. You will probably change their labels to ok and cancel respectively.
5) Drop a create action for your view object from the data control palette inside your page as a command button and set the action property to edit also.
3) Set the action property of the view button to edit
This should basically work without any code from your part. -- at least it does so for me -- if you like to make it a bit more funcy you may add am action listener inside your buttons and set a requeScope variable for example #{requestScope.editing} to true or false depending on the button clicked. Then add a title to your page with a value like #{requestScope.editing == true ? 'Editing record' : 'Adding a new record'}..
Hope that helps.
Thanassis

Photosmart D110a Wireless Troubleshooting with D-Link DIR-655 and Mac OSX 10.8

Good evening all,
Apologizes if this has already been posted. I've googled this issue a couple of times, but I still haven't found a solution for this problem.
I have the Photosmart D110a and I'm running Mac OSX Mountain Lion, and my router is a D-Link DIR-655 and my security is WPA-Personal and the router is running in 802.11gn mode. My ISP is Optimum Online.
The issue that I've been having is that the printer works wireless when everything has been recently booted up. As does the scanner. However, if it hasnt been used for a while, the printer shows up in the OSX Print & Scan settings page as idle, but when I try to print, the dialog just says "looking for printer" and never finds it, and just says "The printer is not connected" under the item in the OSX Print Queue. Because of this, I have to restart the computer or restart the printer for them to find each other again.
I've seen other solutions on here, such as giving the printer a static IP address, and this hasn't worked either. The printer is still accessible with the static IP address, which means it's still got a connection to my network, but for some reason the OS isn't recognizing it or something.
It's obvious that the printer works when everything is freshly rebooted, but I still haven't been able to figure out this issue once it's been idle for a while.
Any help would be greatly appreciated!!
Errold

Hi,
Try following my post below, I believe it might be relevant as the router drops the Bonjour connection:
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/losing-connection-to-airprint-a-few-min...
I would also suggest updating your router's firmware and check if that may help:
http://www.dlink.com/us/en/support/product/dir-655-wireless-n-gigabit-router
For any help with this proccess I would highly recommend contacting Dlink support.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Install from scratch 3 times Mavericks but cannot used my restore it will just start for ever. After first install and restore mail and link between folder and files didn't work anymore. Now cant see my disk in finder. Help?

First install through regular update : never finishing the start after automatic restart
First install from scratch: erase through disk utility, install OS X Mavericks (using Recover mode), restart ok - Used Migration Assistant to restore applications and data only - Mail crashed each 5 inutes and asked constantly for password of my 2 accounts, links between folders and files not OK and attaching a doc was complicated. I downloaded the update same problems
Second install from scratch: erase through disk utility, install OS X Mavericks (using Recover mode), restart ok - Used Migration Assistant to restore applications and data only and settings : never finishing the start after automatic restart
Third install from scratch: erase through disk utility, install OS X Mavericks (using Recover mode), restart ok - But no disk available in Finder
So far no Mac since 3 days ...
Any help is welcome

Still struggling to understand why copying the entire root dir to a disk image and then restoring from that image did not, as expected, yield an identical system, and why I even had to reinstall after doing this.
Because there is a lot more going on under the hood than merely copying files.
The only way to do what you want is to use cloning software like Carbon Copy Cloner.
My advice is to rescue your personal files to a regular non-TimeMachine external drive, Zero erase the ENTIRE drive and install OS X fresh and update, then your programs from original sources and files from backup.
Then, make a bootable clone and you can copy that as many times as you want and each one is bootable.
Most commonly used backup methods
How to erase and install Snow Leopard 10.6

Poster Frame and Trim Mode not working properly with post-synced clips

Hi Everyone-
Final Cut Pro seems to be doing something really odd and I'm wondering if anyone else has experienced it and if so what is the fix:
We are shooting a movie on Red with sound coming in on multitrack wav files. We downconvert the R3D files to Prores and then manually sync the tracks in the timeline.
We link the pix and sound and drag them to the bin to make our dailies. They all play, in sync. When we try to set a poster frame the issues begin. If I load the clip into the browser park the playhead on a frame and choose poster frame, the actual frame in the bin is very noticably offset (often by a few seconds).
Also, when I use the trim mode, the frames jump to a different part of the shot during trim. It's like the shot is jumping ahead or back while I hit the frame advance or recede buttons. Once I let go of the button the image jumps to the correct number of frames. But, it's very distracting if I am trying to trim, for example, to just before an actor blinks. I can't trim 1 frame at a time. I have to keep hitting the button, watching the picture jump to a different part of the shot, release the trim button and watch the picture jump back to the now correctly trimmed frame...
As a test I took some of the Prores clips with scratch track sound and brought them into the bin directly from the finder, bypassing the syncing. Using those clips, the trim and poster frames work as expected. Obviously something is going on during syncing.
I assumed maybe because the audio and pix we different lengths the clip was getting "confused", and didn't know where to "start". So, in the timeline with the synced clips, I razor bladed a few shots, linked them, and dragged them to the bin so the audio and video were the exact same length... Same issue.
I have noticed the same behavior on 2 separate Macs so I don't think its a preference or corrupted install issue.
Anyone seen this and have any suggestions?
Thanks,
David

Yes, David, I'm having the same problem under the same circumstances. we're using merged clips made from Prores QTs and multitrk BWF files. In the trim window, the display frame jumps ahead considerably in a frame-by-frame trim, but trims accurately in the timeline. My only work-around has been to use the left/right scrub arrows in the trim window when necessary, which displays the correct frame. Sorry not to have an answer, but I saw a post on another forum from 2007 that speculated it was an FCP 6 bug. Resetting prefs doesn't help.
Tim

Pagp and silent mode

Hello,
I am confused with the "silent" mode when used with PAGP "auto" and "desirable" modes.
"CCNP BCMSN exam certification guide" book, says that "silent" is used when peer is not capable of sending Pagp frames (does not participate in pagp), so that an etherchannel is built in our side anyway.
But everywhere(cisco's site,book), is reffered that if one peer is in "auto" mode and other in "on" mode OR one peer is in "desirable" and other in "on" mode, a channel is not formed.
Since the default submode for both - "desirable" and "auto" - is "silent"( meaning that our side does not expect any pagp frames) why a channel can not been established?
Thanks.

Hello Bob Grante,
I agree with you that the documentation is very confusing and vague about PaGP negotiation.
From what I understand an EtherChannel will form only if one side is configured to be non-silent. I cannot confirm this because I do not have access to a etherchannel capable switch at this time.
I quote the 3550 Software Configuration Guide 12.2(25)SE.
"Silent Mode" (Page 31-5)
"The silent mode is used when the switch is connected to a device that is not PAgP-capable and seldom,
if ever, sends packets. An example of a silent partner is a file server or a packet analyzer that is not
generating traffic. In this case, running PAgP on a physical port connected to a silent partner prevents
that switch port from ever becoming operational; however, the silent setting allows PAgP to operate, to
attach the interface to a channel group, and to use the interface for transmission."
The configuration examples te
"Configuring EtherChannels (Page 31-10)
"non-silent -- If your switch is connected to a partner that is
PAgP-capable, you can configure the switch interface for
nonsilent operation. You can configure an interface with the
non-silent keyword for use with the auto or desirable mode.
If you do not specify non-silent with the auto or desirable
mode, silent is assumed. The silent setting is for connections
to file servers or packet analyzers. This setting allows PAgP
to operate, to attach the interface to a channel group, and to
use the interface for transmission."
I also would like to quote Brian McGahan, CCIE #8593
"The description of silent and non-silent is hard to extrapolate from the brief description on CCO, but this is what it means. When in "silent" mode, the switch will generate (if in "desirable" mode) PAgP and respond to PAgP (if in "auto" mode) regardless of whether the link is "silent", meaning whether or not you are recieving traffic from your neighbor.
When in "non-silent" mode, the switch will only initiate or respond to a PAgP request if the link is "non-silent", meaning that you are receiving traffic in the interface.
Why this is even an option I'm not really sure, but by default the switch will run PAgP regardless of whether or not traffic is being received in the interface." -- http://forum.internetworkexpert.com/ubbthreads/showflat.php?Cat=&Number=3346&Main=3256
I think the only way to find out is to test it yourself in a lab environment. I will keep this in mind for future testing.
Best regards,
Leon

Windows explorer does not start and could not open control panel.

HP Touchsmart 610-1280
When trying to open window explorer, it says window explorer is stopped working and trying to restart. But it does not open. Cannot go to control panel.

Hello GLPP:
Can you srst up the computer in safe mode. Turn off computer and turn it back on press F-8 and hold as the computer starts up. Ounce in safe mode open up recovery manger select microsoft recovery and do a back restore recovery choose a date as close as you can before this problem occurred and do the recovery. This will fix your issue.

Flipping between AT&T LTE and Emergency mode

Greetings,
I am the proud new owner of a BlackBerry Z10. Within a few days of getting the phone, I noticed it was flip-flopping constantly between AT&T LTE and emergency mode. I could not make or receive calls, and text messages I sent were often received multiple times. Here are some of the steps I took to try and resolve the problem:
1. Went to the AT&T store and had a new SIM card installed
2. Several days later, I went back since the problem persisted. They provided a replacement phone.
3. Performed a security wipe, interrupted it part way through, and performed a fresh install from a PC using BB Link.
4. Called AT&T support, who suggested replacing it with yet another phone. However, this didn't seem helpful since I purchased the original phone in Pennsylvania and swapped it out the first time in Texas - I wouldn't think they'd have phones from the same "batch" in such geographically disparate locations.
I'm out of ideas on what else could be causing this and would greatly appreciate any insight the community here could provide!
Thanks in advance!
Solved!
Go to Solution.

Thank you for the help and suggestions! I worked with AT&T support and they "did something" ...the phone has been stable and working flawlessly for a few weeks now. Unfortunately I'm not sure exactly what they did to correct the problem; all I know is that it went to their "L3 support" who in turn worked with Blackberry. It took them about a day to fully fix the issue but since then, it's been all blue skies.
Thanks again!

Link between 0RECORDMODE AND ROCANCEL

Hi, could you pls explaint the link between 0RECORDMODE and ROCANCEL
I just dont understand why they are mapped in transferrules. and i dont have the field ROCANCEL field in my datasource. actually what scenario makes 0RECORDMODE and ROCANCEL go together could u pls explain
Thanks in Advance,
Pallavi.

Hi,
First: the recrodmode controls how data is posted into cubes or ODS (DSO) Objects.
Different Chars have different meanings:
N for new records
B for Pre Imgages
' ' for after images
R for Reverse Images
X for Storno
D for Deletion of a Key (only in ODS possible)
What extractor delivers what different types pof values can be seen via to tables:
ROOSOURCE in the source R/3 System.
There point out th edelta mechanism. With this value, check within Table RODELTAM. There you see the different POSSIBLE Values for ROCANCEL delivered by a DataSource.
The relevant objekt for the controlling of the mode in BW is the InfoObject 0RECORDMODE. Each ODS (DSO) has this Object. For Logistic-Extractors (except MaterialManagement) 0RECORDMODE should be mapped with ROCANCEL.
0STORNO generally is an InfoObject for Reports. E.G. Material movements. Stornos are posted in R/3 with particular so called movement types. Each movement typer contains an information if it is of type "Storno". If this is so, the field storno contains an X.
If you now map the storno field onto 0RECORDMODE, the record is interpreted as a storno record an will be wied blank ini the DataTarget.
If you have monotone increasing document numbers (like in CO-PA, CO-OM, MM-INV ...) 0RECORDMODE should be left blank. 0STORNO can be used for Reporting then and be filled differently.
If you can have changes to an already existing document number (like in sales orders or purchase orders) i'd strongly recommend to map 0RECORDMODE onto the delivered ROCALNCEL field.
also Check
Refer OSS Note 399739 and 333492
Thanks..Assign points if helpful.
´Tony

Explore links in recursive and multithreading mode

Similar Messages

Maybe you are looking for