Export all Channels to Excel without a dialog or a stp file

Hello,
i try to write a vbs script that export all channels that exists to excel without a dialog. By the reson that i don´t know exactly how many channels are generated while the measurement i can´t use a stp file. I tried to set all variables but everytime i get a global error (excelstat=100).
Since this problem was discussed in 2006 ( http://forums.ni.com/ni/board/message?board.id=60&message.id=2115&query.id=95137#M2115) perhabs there is a solution now with Diadem 10.2, besides generate the stp file in the script or hold stp files for any possible number of channels.
Thanks for the help
diademi
Message Edited by diademi on 04-24-2008 10:10 AM

Hi diademi,
Nothing has changed in DIAdem since then, but you do have several options. First and foremost, you can save the data as a TDM file and use the freely downloadable TDM Excel Add-in to load the TDM file into Excel. This has the advantage that it's extremely fast but the disadvantage that it's completely inflexible as to where and how the written values show up in Excel.
http://zone.ni.com/devzone/cda/tut/p/id/4906
If that doesn't work for you, you can export the data channels into an ASCII file, as mentioned in the older link. This has the advantage that it's fast but the disadvantage that it's not very flexible as to where and how the written values show up in Excel.
Finally, you can export your data channels into an Excel file using ActiveX calls in a DIAdem VBScript. This has the advantage that it's flexible in where and how you write the values, but the disadvantage that it's comparatively slow, especially for large data sets.
Let me know what sounds most promising, and I'll send you code. Also, please confirm whether you're using Excell 2007 or an earlier version.
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Similar Messages

Is there way to "export all tracks as audio" without such extreme volume?

Exporting some songs for a client, and when i use the "export all tracks as audio" function-- the tracks created are much louder than the levels i have them at in the song. I'm paying mind to the 'normalize' function, as well as the automation option.
But it seems to not matter if i turn the master volume down, or if I turn the output down- the tracks are much, much louder than they are in the song.
Anybody know of a way around this short of bouncing each individual track one by one? We don't have time for that.

AIFF and WAV are sonically identical, doesn't realy matter which you choose. AIFF is to Mac what WAV is to windows.
It does not have any bearing on levels, that is up to the *Track Automation.* If you have no Track Automation the files will be exported as if the fader is at 0 dB. ONLY when you automate the fader and put the track in *Read mode* will there be a difference, and only if you check the *include Pan/Volume automation* option.
http://documentation.apple.com/en/logicpro/usermanual/index.html#chapter=32%26se ction=12%26tasks=true

Export all user's schema , without One

Dear Friends ,
I am running Oracle 10g in my production server . Here I have near about 20 user/schema . Now I want to export data from 19 user without 1 user , i.e., I just take export 19 users only . Is it possible to do ? Is there any script to do this ?

Hi,
>>Is it possible to do
Yes it is. If you want to use a old export version you must use the OWNER clause.
exp system/password owner=user1,user2,user3,user4,user5... file=test.dmpNow, as you are using Oracle 10g, you can use the SCHEMAS clause in the new expdp (Datapump). So, I advise you to take a look either at [url http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/dp_overview.htm#i1009203]Overview of Oracle Data Pump or [url http://www.orafaq.com/wiki/Datapump]Datapump Faq
Cheers
Legatti

I am moving all my iphoto pictures to seperate folders outside of iphoto. I have found iphoto slighlty cumbersome. After I move all pictures from iphoto to a separate file how can I delete all the iphoto photos without deleting the ones in the file?

I am moving all of my iphoto pictures into seperate folders becuase iphoto is great, but a bit cumbersome when I need to transfer all the pictures to a external drive.
1) After I move all pictures, how can I delete the iphoto pictures without destroying the ones I have in files
2) how can I ensure that I have sucessfully captures all the iphoto files so when I delelte from iphoto I have not forgotten any
3) is there a way to determine what duplicate pictures I have?
Thanks!

If you Control click on the iPhoto Library, you'll see a list of folders - one named "Masters". Inside of this folder are all of your original, high-res photos. You can copy them to other folders if you like.
You can't delete iPhoto pics without deleting the ones in the iPhoto Library.
You can copy all of your Masters pics out of the Library, ensuring that you won't forget any.
I don't know of anyway to determine if there are duplicate photos - most (if not all) have a unique name assigned.
Good luck,
Clinton

Export in excel without displaying all rows

Hello,
I use OBIEE version 10.1.3.4.1.
I have a report in "table view" with thousands of rows.
I would like to export a report to Excel, without displaying the data. Is possible to set the execution as an export in Excel?
Alternatively I enabled the "Page Control" by 50 "row per page." Is possible to export to excel all the row of the report without to see them all?
Thanks
Sara
Edited by: Sara C. on 25-gen-2010 6.23

Hi Sara,
you have 2 options:
1. use ibots to deliver your report in the form of an excel. This would avoid the generation of report.
2. Use "download to excel" option. This option downloads the entire content and NOT the ones displayed on the screen.
Hope this helps.
cheers,
Vineeth

Reg: Exporting the data into excel in ADF 11g application.

Hi All,
We have developed an application in ADF 11g which retrieves the data from database in the form of table. Now we have a requirement to export that data into an excel sheet.
Can anyone please help us regarding this.
Thanks,
Harsha

Hi Harsha,
you can use <af:exportCollectionActionListener /> component to do that. Set the exportedId property to point to of the table. You have options to export all rows or only selected rows.
<af:commandToolbarButton text="Export All Rows to Excel" immediate="true"
                                               id="exportAll">
<af:exportCollectionActionListener type="excelHTML" exportedId="table"
                                                 filename="export.xls"
                                                 title="ADF Faces Export - All" exportedRows="all"/>
</af:commandToolbarButton>
<af:commandToolbarButton text="Export Selected Rows to Excel" immediate="true"
                                        id="exportSelected">
<af:exportCollectionActionListener type="excelHTML" exportedId="table"
                                                 filename="export.xls"
                                                 title="ADF Faces Export - Selected Rows"
                                                  exportedRows="selected"/>
</af:commandToolbarButton>Good Luck,
Luc Bors

Export all tracks as audio files

Hi all,
I need to export all my tracks as audio files, and i need them to all be the same length, i set a loop brace from the first bar to bar 233, but when i choose export all tracks as audio files, some tracks are coming out at say 4m06, some are 5m30 etc.
I would like to just export all tracks and have them the same length - i.e the full song length. Is this possible?
The only way i've found at the moment is to bounce each track one at a time, but this is going to take ages lol!
(i did try putting a blank midi file or audio file at the very end of every track to make logic think it needs to export all channels right to the end, but this still didn't work)
any ideas or help would really be appreciated,
Thanks

This is just the way the export feature works. Once there is no more audible audio data, or MIDI information, the exported audio region ends.
Is there a particular reason you need every region to go to the end marker, even if no audio or MIDI information is contained to that point?
This actually saves you hard drive space, by not creating audio files bigger than necessary.

Script for exporting all stories to one RTF file

Hi, I've been searching for this as I know it's been asked before, but I haven't had any luck finding it yet: Wasn't there a script that someone developed which would allow you to export all stories from an InDesign document into a single RTF file? Or is that wishful thinking....
Thanks, Phyllis

http://www.kahrel.plus.com/indesign/batch_convert_cs3.html
Kasyan

Export to Excel Action in MS SSRS Report not exporting all data in Report

Hi,
I have developed a complex Report that has many expandable nodes in a table format. The report works fine.
However, when I export the Report to Excel using Actions --> export to Excel, only the data in expanded nodes is included. The data in collapsed nodes is not included.
I am looking for approach to include data in expanded nodes in Excel Export. The expanded data can be expanded in Excel.
Any help in this regard will be appreciated.

Hi Abhijit PS,
Per my understanding you are experiencing the issue with the excel report which have add the drill down action, after export to excel only the expanded nodes included and the collapsed nodes is not shown, right?
Generally, if we expand the nodes before export to excel then the excel will display the expanded details row and keep collapsed the details row which haven't expand, but we have the toggle "+","-" on the left of the Excel to help
control the expand and collapse, when you click the "+" you can expand the collapsed notes to see the details rows.
I have tested on my local environment with different version of SSRS and can always see the "+","-" as below:
On the Top left corner you can find the "1","2", this help to control the "Collapse All" and "Expand All".
If you can't see the "+","-" in the excel, the issue can be caused by the Excel version you are currently using, and also excel have limit support of this, please provide us the Excel version information and the SSRS version. You
can reference to this similar thread:
lost collapsing columns when export to excel
Please try to export other drill down report to excel and check if they work fine, if they did, the issue can be caused by the drill down action you have added in this report is not correctly, if possible, please try to redesign the report.
Article below about how to add Expand/Collapse Action to an Item for your reference:
http://msdn.microsoft.com/en-us/library/dd220405.aspx
If your problem still exists, please feel free to ask
Regards
Vicky Liu

Not able to export all table data to excel

Hi All,
I am using jdev 11.1.1.4.0
I want to export all my table data to a excel file.
I used ADF inbuilt <af:exportCollectionActionListener/> to do the same.
Also, I have pagination on my JSPX.
When I click on export button to export the data, it exports current records in the page not all the records.
For instance, I have 100 records in my table and I am displaying 20 records per page.
When I click on export to excel image, it exports current 20 records instead of exporting all 100 records.
Please tell me how to export all the records to the excel.
Sample code,
<af:exportCollectionActionListener exportedId="t1" type="excelHTML"/>t1 is id of my table from which I want to export the data.
also, I have tried exportedRows="all" - but it doesn't work!!!!
Appreciate your help.
Thanks and Regards,
Madhav K.

Hi Arunkumar,
thanks for your reply.
Yes, it works....
But I don't want to do the same in such way.
Because almost every page I have export to excel functionality.
So if follow this way then I have extra table on every page. I don't want this in my application.
Is there any other way???
Thanks and Regards,
Madhav K.

Exporting PDF document to Excel. When I export a PDF document to Excel containing lists of people the Excel page shows all the names on one line several inches deep instead of on separate lines which makes editing impossible. What am I doing wrong?

Exporting PDF document to Excel. When I export a PDF document to Excel containing lists of people the Excel page shows all the names on one line several inches deep instead of on separate lines which makes editing impossible. What am I doing wrong?

Murray is right. Padding (and margins) is added to the width. However, when using percentages, you should never use figures that add up to exactly 100%.
Browsers need to convert the percentages to pixels. Because pixels must be whole numbers, some percentages are rounded up, which results in the final element dropping down below its neighbours. With percentages, it's much safer to use values that add up to 98% (99% often works, but 98% is safer).

Not able to export all the rows into excel

Hi All,
I'm not able to export all the records in discoverer report to excel sheet.
There are actually 27000 records in discoverer report, when i export them to excel sheet i can see only 16000 records.
I'm using discoverer plus.
Any suggestions...please share with me.
Thanks in advance,

Hi,
Do you have parameters on the worksheet? if so then are you selecting same as when you ran it?
What version are you using ? Plus? Viewer? Desktop?
You can export the worksheet into CSV instead of XLS and see what you get.
Also check other formats to see if this missing lines happen in all export methods or just the XLS.

Export all data from my waveform chart to excel

Hello, my name is Chris. I am just learning to use LabView. Everything I have learned so far is through these boards. Which is a valuable tool for someone learning. The VI I am working on is to monitor current from a unit we are testing. I am able to monitor current and have it running in what I believe to be real time. As I said, this is the first one I have made. I am trying to export all the data from my Waveform Chart to a report. Everytime I try I get one instance and it measures 0. I don't know what I am doing wrong. Any help would be appreciated. Also, if you have any suggestions on the all around working of this I would appreciate that as well. Thank you in advance.
Attachments:
Lp Current Test.vi ‏83 KB

Hey Christophrt,
If you are trying to display the microseconds for a waveform chart in LabVIEW here is how you can do it:
Go to the Chart Properties>Display Format>X-Axis>Advanced editing mode>enter:
%<%I:%M:%S%6u>T as the format string and you will have the hours: minutes: and seconds to the microseconds.
If you are trying to display the exported data in microseconds in Excel, you will probably have to do some formatting changes in Excel to have that work.
Regards,
Tommy G.
Applications Engineer
National Instruments

How to export diadem channels to an existing excel file with a certain configuration

Hello,
I would like to export some channels from the Data Portal of Diadem to an existing excel file. The excel file consists of many spreadsheets and each channel should match one spreadsheet.
I´ve tried to use EXCELExport() function but it doesn´t work.(this function is designed for something else, it generates a new excel file). I´ve tried to access to each spreadsheet and copy the information throughout a for statement but this solution needs a lot of time. If somebody has any idea, please help.
Solved!
Go to Solution.

Hi Ovidius,
You have two options that I can think of. You can export the data from the Data Portal to a temporary file, probably a CSV file, then load the data from file into the Excel template, OR you could stick with the Excel ActiveX approach but change to assigning a range of cells instead of individual cell values one at a time.
There is an Excel File Export option in DIAdem, but it always creates a new Excel file, it can not be used to export to an existing Excel file.
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Export to excel without assistant?

Hello,
I need your help once more...
I built a measurement-system that reads data from RS232 and exports it to an excel-file. That all works with an autosequenz, but I want to automate the export, so that I do not have to click on "Finish"-button.
Is that possible?
(The filename is generated automatically in my autosequenze)
Thanks for your help...
Nico

Here are my files. Perhaps you can take a look and analyse what I'm doing wrong...
Nico
Attachments:
Serial_Input.zip ‏8 KB

Export all Channels to Excel without a dialog or a stp file

Similar Messages

Maybe you are looking for