Export Artboards with file name = to artboard name

My job requires me to deal with multiple artboards in a single file (same project versioned out among several clients). Is there any way to export from Illustrator where the exported file's name would match the name of the artboard rather than documentName-01, documentName-02 and so on?
Note: I am working with CS5

You can rename the artboards there.
The name gets part of the file name on export.

Similar Messages

How to get multiple image resoultion and paste it in new ms word doc or ecxel with file name

Hi any one help me to get the imge resolution and paste it in new ms word or excel
i have 100 file i fixed the sizing for all the file by downsample using javascript
i want to get the resolution of all the image and paste it with file name
anyone please help me
Thank you

Hi any one help me to get the imge resolution and paste it in new ms word or excel
i have 100 file i fixed the sizing for all the file by downsample using javascript
i want to get the resolution of all the image and paste it with file name
anyone please help me
Thank you

Received File send with file name to destination side

Hi All,
Here I have used FILE adapter in Receive location and WCF-BasicHttp adapter in send ports.
Requirment is should be able to send the file name also along
with the file to destination from BizTalk.
No orchestrations in this project. DynamicSendPassThru sendport. Please find the below screenshot for send port properties.
How can i fix this please assist me on this.
Thanks & Regards,
Vasu

Hi Osman,
below code is custom pipeline code. and what code and where can i add the code.
regarding send the file with file name from BizTalk to OutBound transport location.
Please assist me on this.I'm not aware coding part.
publicMicrosoft.BizTalk.Message.Interop.IBaseMessageExecute(Microsoft.BizTalk.Component.Interop.IPipelineContextpc,
Microsoft.BizTalk.Message.Interop.IBaseMessageinmsg)
            System.Diagnostics.
Debug.WriteLine("Inside
SendFileRenameWithDate Pipeline",
"SLNG.BizTalk");
IBaseMessageContextmessageContext = inmsg.Context;
// if the transport type is file for outbound, then change the add in the date in the file name.
stringadapterType = (string)inmsg.Context.Read("OutboundTransportType",
"http://schemas.microsoft.com/BizTalk/2003/system-properties");
// The file name in the file adapter must contain '%SourceFileName%', e.g. CB_%SourceFileName%.xml
if(adapterType ==
"FILE")
// Retreive the file name from the message context
//object obj = messageContext.Read("FileName", "http://schemas.microsoft.com/BizTalk/2003/file-properties");
//string customSendFileName = obj.ToString();
//System.Diagnostics.Debug.WriteLine("FileName:" + customSendFileName, "SLNG.BizTalk");
// Append with date in ddMMyyyy_HHmmss format
stringcustomSendFileName =
if(string.IsNullOrEmpty(DateFormat))
                    customSendFileName =
DateTime.Now.ToString("yyyyMMdd_HHmmss");
else
                    customSendFileName =
DateTime.Now.ToString(DateFormat);
                System.Diagnostics.
Debug.WriteLine("FileName:"+
customSendFileName, "SLNG.BizTalk");
// Write back with new file name to the message context
                messageContext.Write(
"ReceivedFileName",
"http://schemas.microsoft.com/BizTalk/2003/file-properties",
customSendFileName);
//if (messageContext.IsPromoted("ReceivedFileName", "http://schemas.microsoft.com/BizTalk/2003/file-properties")
== false)
//    messageContext.Promote("ReceivedFileName", "http://schemas.microsoft.com/BizTalk/2003/file-properties",
customSendFileName);
//messageContext.Write("FileName", "http://schemas.microsoft.com/BizTalk/2003/file-properties", customSendFileName);
            System.Diagnostics.
Debug.WriteLine("Going
off SendFileRenameWithDate Pipeline",
"SLNG.BizTalk");
returninmsg;
        #endregion
Thanks & Regards,
Vasu

EXPORT 시 DATE FUNCTION 을 FILE NAME 으로 이용하기

제품 : ORACLE SERVER
작성날짜 : 2002-04-08
EXPORT 시 DATE FUNCTION 을 FILE NAME 으로 이용하기
=================================================
PURPOSE
다음은 export시에 date function을 file name으로 이용하는 방법을
설명한다.
Explanation
1)DATE 를 넣어서 shell program 으로 exp 를 하는 방안은 다음과 같다.
CDATE=d`date '+%m%d%H%M%S' `;export CDATE
exp scott/tiger file=$CDATE.dmp full=y
2) UNIX prompt 에서
$setenv CDATE=d`date '+%m%d%H%M%S' `
exp scott/tiger file=$CDATE.dmp full=y
Reference Documents
--------------------

Hi All,
I got the solution.
The code which i had written in the FM is wrong.
OUTPUT = SY-DATUM - 1. // Wrong.
The correct one is below :
DATA: Temp TYPE SY-DATUM.
Temp = SY-DATUM - 1.
OUTPUT = Temp.
And after that, in FM's Export tab, it should be Export parameter as OUTPUT and checked the "Pass value" check box.
For the Physical File : <F=TEST>.txt.
Here the FM which i created was FILENAME_EXIT_TEST.
When I am calling the corresponding Logical file in the APD, It is working fine.
Thanks for your inputs.

How to print contact sheet with file names

I want to print a photo contact sheet with file names. Is this possible with any standard Mac app?

I'd like to print the Album name at the top of each contact sheet I produce from that album - is this possible within iphoto '08 or do I need to print to a pdf and then edit that pdf with acrobat pro for example.

How to copy the photo with file name at window 7 and search specific one in iphone 4s?

How to copy the photo with file name at window 7 and search specific one in iphone 4s?

Clendenen02 wrote:
2) It would be equally helpful if there was something that would take the name of the picture file and spotlight comment, copy and paste it to a movie file's comments with the same name but obviously has different extention. For an example
In a Pictures folder
Name: Dark Knight, The.jpeg       Comment: (2008) Genre: Action...             <- copy comment
In a Movie Folder
Name: Dark Knight, The.m4v       Comment:                                               <- paste
and do this for all 700 files
This Bash script will do it.
Edit "PicDir" and "MovDir" to the location of your Folders
(Note: The comment is written to the m4v file using xattr, so the Spotlight comment field appears blank in Finder, but the comment metadata is still indexed by Spotlight (If you add a Spotlight comment from Finder, it is stored both as an extended attribute and in a .DS_Store file)
#!/bin/bash
PicDir=$HOME/Desktop/Pictures
MovDir=$HOME/Desktop/Movies
for f in $PicDir/*
do
     if [ ! -d "$f" -a "${f##*.}" == "jpeg" ]; then
          comment=$(mdls -raw -name kMDItemFinderComment "$f")
          if [[ $comment != "(null)" ]]; then
               picname=${f##*/}
               movname=${picname%.*}.m4v
               if [ -e "$MovDir"/$movname ]; then
                     xattr -w com.apple.metadata:kMDItemFinderComment "\"$comment\"" "$MovDir"/$movname
               fi
          fi
     fi
done

Feature Request: Add option to not have artboard name saved with file name

Please give us an option to turn off the artboard name being appended to the filename. I work in an environment where I have to do a lot of versions and very specific filenames that are given to authors. I like using artboards, but currently, the artboard name is appended to the exported file name and I have to change the file name each time to make it useable to me. I would greatly appreciate the option to turn this off. It creates a lot of unncessary work for me.
Thank you

Why not simply add the field by modifying the template?

Export List of File Name with Faces Identified

I'd like to export a list from Aperture, into any file format - Words, Numbers, rich text, MS Word, MS Excel, anything!!
The list would show the file name and all the faces identified in that file.
My daughter is in her High School dance team. I've taken more than 1000 photos. Here is is the end of the season and I'd like to distribute the photos among the dancers/parents. They don't have the software or care to take the time to sort through the pics to figure out which photos they are in. I'd at least like to give them a list of photos so that can find the ones
Faces can be a helpful feature (though I hate all the file versions all over the place in iPhoto and Apeture).
I've read that Faces is not stored in the metadata of the file. I've tried to export metadata, but not much comes out other than the standard file size, camera settings, etc.
Easier to describe the situation, I guess, but would be helpful for many photos with people (weddings, parties, reunions, genealogy photos ...)
which is Faces is supposed to be about, RIGHT???
I guess a work around could be exporting the files from the identified faces. That seems like it would just junk up more storage/memory. I guess you could use a file list naming app and then delete the exported files - that just seems stupid.
I expect a little more from a souped up version of iPhoto for $79. Especially if I have Adobe Creative Suite with Bridge. If Apple wants to give a little shove to Apple, and bring novice users from looking for a non Apple solution, I think this would be an EASY no brainer.
Thanks anyone who has a solution of a decent work around.
Beth in Wisconsin
Aperture 3.06
Adobe Creative Suite 6

Dear Kirby, Thank you so much for your reply.
I'm familiar with Metadata. I've worked with Canto Cumulus and Filemaker.
I guess a more important question - where is the Faces data stored?
I'm looking to export a text version by file name, such as in a spreadsheet. Something like this
File Name     PhotoFile_01.jpg     PhotoFile_01.jpg     PhotoFile_03.jpg
Faces ID'd    Nina Totenburg        Carl Kasel               Tom Ashbrook
Faces ID'd    Carl Kasel                Peter Sagel
Faces ID'd    Terri Gross               Terri Gross              Nina Totenburg
Faces ID'd     Renee Montaigne    Tom Ashbrook
OR
File Name                    Face 1               Face 2          Face 3               Face 4
PhotoFile_01.jpg         Bob Braun         Tina Fey        Andy Warhol
PhotoFile_02.jpg         Leah Jones       Beyonce        Tina Turner      Dave Matthews
PhotoFile_03.jpg         Lisa Liu            Geena Davis
Anything that would identify the faces in a photo to a text file ....
Yes I understand that most of the IOS software is supposed to make it easier for the new and less techie user. But if you are going to create all these versions and mini files for the photos, why not make them accessible to a power user. I'm not a coder, but I've been using macs for 25 of my 40 years.
What gets me is that you go to the trouble of identifying all the Faces. What is Faces really supposed to help you with?
I mean Facebook is better at face recognition than this. Don't go on a tangent - about this - just sayin'.
Thanks for your time!
Beth

Export to Excel - File Name WAD 7.0

Hi All,
I am using Export to Excel Functionality with WAD 7.0 to export the report to excel format.
I have used button web item, with an excel picture above it. The functionality works fine.
But while exporting the name of excel file shown is WAD 7.0 name.
ex. My WAD 7.0 name is IFIOP_C07_W700, the excel file also gets saved in this name.
I want it to be made customizable.
Can you throw some pointers.
Thanks,
Sri Arun Prian

Hi,
i have the same issue now where i need to populate the xport file name as report name. can you send me your solution please.

Saving as PDF - problem with file name

Hello everybody,
I have a little problem. I'm making a lot of similar document with InDesign so everytime I copy/paste the latest and then rename it from windows. But when I try to save (with a custom preset) the document as PDF, everytime on default InDesign gave the name of the original document, so I have to write the right name everytime. How can I change this? I want to have on default the file name I'm working on, not the original one.
EXAMPLE
I copy and paste "average.indd" and then I rename it as "joe.indd". I make some changes inside JOE, save it and then try to export as PDF. When the saving window appear, the program suggest "average.pdf" as name of the PDF I'm creating.
Thanks for your support and excuse me if my english is not that good (not my language).
Have a nice day!
Dario

Ah well, it is generally accepted that the most recent PDF-export file name "sticks" and when that's the case, there isn't anything you can do about it except type in the new name you want. However, I just tried it a second time (the first time before my first post), and here, I got it to work the way you want by doing what I originally advised...
Start new file.
Save As average.indd
Export > PDF...file name defaults to average.pdf
Back in InDesign, Save As joe.indd
Export > PDF...file name defaults to joe.pdf
What exactly did you try, and where did the result differ from what I saw?

VERY frustrated with file names!

I've read many posts that have explained why we can't use spaces in the file names but none have really explained how to get around it. I'm creating a small web site with about 4 separate photo pages. It will be published to a non-mac server. I've tried evrything I can think of to change these file names but they keep coming back.
Dragging them from the media browser brings in the filename (with spaces).
I made a duplicate of each photow within iPhoto and renamed with no spaces but once imported to iWeb the original titles came back
I've exported entire folders and given new names to all photos during the process and they came back again also
Some retain their title (summer vacation 10/02)
Some revert to original file name (DCS0001523.jpg)
I'm really fed up. Any help?

And remember to also delete the original photo
that
is sitting in your Library, because it somehow
keeps
the offending titles.
I wouldn't recommend deleting the original photos in
your iPhoto Library. I always recommend making
duplicates of the photos you will be using and then
applying any processing to those duplicates. What I
usually recommend is that you gather up all the
photos you will use into a temporary album, then
export them (and thereby duplicating them) all at
once to a folder on the desktop where you can access
them for more processing before you drop them into
iWeb.
I don't like to disturb my "originals" as you can
tell. Always making copies!
We think somewhat alike but I am not as careful as you. I always make a duplicate before I work on a photo. Frequently I delete the one that got improved upon because the Original is sitting in the Library anyhow.
But I messed up with my website pictures. In iPhoto I had a bunch of folders for categories, so I made more folders and called them WEBChris Professional, WEBChris and Lorna, WEBCheyenne, etc.
The problem is that somewhere along the line I ended up with TWO WEBLornas. God knows how, but maybe one was a copy. I should have nipped it in the bud when I noticed it, but I was busy working on iWeb and let it get worse and worse (because I kept putting pictures away into folders and I was never sure which Lorna folder a picture would go into. Oh, maybe one was a young Lorna the other an old Lorna, but at this point they are mixed young and old. Bummer.
— Lorna in Southern California

Automate exports and imports (file names)

Hi all,
I will like to do a simple export and import into another schema in another database.
I am very comfortable with the process but all i require is how to set the dump file and log file names to be the date and name of the database being exported and imported.
For example when I do the export I want the dump file and logfile names to be exp_ORCL_230805.dmp and exp_ORCL_230805.log for database ORCL exported on 230805.
For the import I want the logfile name to be imp_TEST_230905.log.
I am doing this export and import on a windows xp client but the database reside on UNIX AIX boxes.
Thanks alot

Set up ORACLE_SID before you start the imp/exp session on the client, then you can use file=exp_%ORACLE_SID%_%DATE%.dmp etc. (Note that if your windows locale has a date format w/ whitespace you might have to write a script to get rid of it..)

After upgrading to ios 5.1.1 the icons for dlete, export, etc. under file names are missing. Please help.

Hi,
After upgrading to ios 5.1.1 the icons (delete, export, mail) below the file names in garage band are missing. Any ideas about this. Thanks.

Oh, I've tried this as well: http://blog.scoopz.com/2010/09/11/iphone-camera-roll-thumbnails-corrupt-shows-bl ack-boxes-fix/, but it didn't make a difference; the videos I capture with the iphone are fine, it's the movies I uploaded myself that don't have a thumbnail.

Export tables with lowercase names

Has anyone ever done a table export on a table with a lower case name?
I have set up a parameter file with the entry:
tables=USER."table_name"
but I get a:
EXP-00011: USER."table_name" does not exist
The table DOES exist, and if I ever find the person who designed an entire schema with lower case table names I'll strangle him...
The syntax, with the double quotes, is what's shown in the Docs I have to hand.
Anyone?

Yes, so have I. But they still translate to uppercase when the export actually happens.
I actually have a schema full of tables, all with lowercase names, and I can't export them explicitly.
I have tried it with 8.1.5 and 8.1.6 (Solaris).
I'll try it with 9i and 8.0.6 when I get the instances up, but I'd really like it if someone else could try this and tell me I'm hallucinating. (I'd like to see your parameter syntax too of course!)
BTW, if you do try experimenting with lowercase table names, be prepared for things like TOAD and some of the OEM software to screw up too.

Export html - Image files names

Hi,
I'm trying to create a project with an image (map of Italy) that highlight any region on mouseover (rollover).
Everything is fine, and when I preview on firefox it looks great.
Problem is that when i export it (export with images in a folder), it creates some strange names of these files (ie: no title_r1_c1_d1), that is not recognized by other html softwares (joomla).
Is there any way to export these file names with another name?
The project is really long and it would be impossible to rename these files when the have allready been exported, so I need to find a solution to tell fireworks to export them in a right format.
Thanks in advance

I'd suggest looking at the Export options (in the dialog that appears after choosing File > Export). For instance, maybe it would help to deselect "Include Areas without Slices".
In addition, you could experiment with the HTML Setup options (by clicking the Options button in the above dialog or by choosing File > HTML Setup). For example, in the Document Specific section, there are file naming options for slices.
Sorry, but there are a lot of variables and unknowns in what you're describing, and it's hard to narrow down what's happening. These are general suggestions.

Export Artboards with file name = to artboard name

Similar Messages

Maybe you are looking for