Export content from cluster table RSZWOBJ

Hello,
i need the html-cotent of the SAP BW cluster table 'RSZWOBJ'. I've tried this about the ABAP statement
IMPORT FROM DATABASE rszwobj(bm) ID key
but the results wasn' t very succesfully.
The goel is to get the html-coding of the relevant BW-bookmark, to search this bookmark for an specific string, this string should be replaced for an another one. After this action the changed html string have to export to the cluster table 'RSZWOBJ'.
If this procedure possible with the IMPORT-Statment or there are any another possibilities to change the content in the cluster  table 'RSZWOBJ'?
With best regards
Jurand

Hey Sandra,
thank you for your help. Your advice has solved the problem.
With best regards,
Jurand

Similar Messages

  • Read data from cluster tables

    Hi,
      I met a problem.
      How to read data from cluster tables using:
      b2-key-pernr = 20.
      b2-key-pabrj = 2006.
      b2-key-pabrp = 09.
      b2-key-cltyp = '1'.
      import saldo from database pcl2(b2) id b2-key.
    the problem is that the sy-subrc is always 4, could anyone help me?
    thank you very much!

    Hi,
    Import and export to database is used in two programs and not in the same program.
    <b>ZPROGRAM1.</b>
    tables : indx.
    Data : SALDO type i,
           indxkey LIKE indx-srtfd VALUE 'ZAB1'.
      indx-aedat = sy-datum.
      indx-usera = sy-uname.
      indx-pgmid = sy-repid.
    EXPORT SALDO TO DATABASE indx(zc) ID indxkey.
    In another program,
    <b>ZPROGRAM2.</b>
    tables : indx.
    Data : SALDO type i,
           indxkey LIKE indx-srtfd VALUE 'ZAB1'.
      indx-aedat = sy-datum.
      indx-usera = sy-uname.
      indx-pgmid = sy-repid.
      IMPORT SALDO FROM DATABASE indx(zc) ID indxkey.
    Best regards,
    Prashant

  • How to Extract data from Cluster table  and transperant table

    Hello BW Experts ,
    I want to extract the data from cluster table BSEG and a transperant table BKPF .
    The primary fields are BELNR , GJHAR and BUKRS.
    the fields of table BKPF to extarct is BUDAT and fields of BSEG table is HKONT , BSCHL , ZUONR and POSID.
    I can not create a view over these two tables as BSEG is a Cluster table.
    Please guide me.
    Regadrs ,
    Amol.

    hi Amol,
    take a look Sigg's weblog
    /people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
    you can use RSAX_BIW_GET_DATA_SIMPLE as sample, there specified import parameters
    FUNCTION RSAX_BIW_GET_DATA_SIMPLE.
    ""Lokale Schnittstelle:
    *" IMPORTING
    *" VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
    *" VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
    *" VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
    *" VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
    *" VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
    *" TABLES
    *" I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
    *" I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
    *" E_T_DATA STRUCTURE SFLIGHT OPTIONAL
    *" EXCEPTIONS
    *" NO_MORE_DATA
    *" ERROR_PASSED_TO_MESS_HANDLER

  • How to Export data from a Table to Excel using PL/SQL Code

    Hi,
    I need to export data from a table to the excel sheet using PL/SQL script.
    could you pls provide with custom codes or sample procedures.
    Bobby

    http://asktom.oracle.com/pls/ask/f?p=4950:8:7947129213057862756::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:728625409049

  • [b]export data from a table to a csv or .txt file[/b]

    hi plz i need help in how to export data from a table to a csv or .txt file

    If you are using TOAD, then you can execute the statement like SELECT * FROM TABLE1
    Then, you can go to Output Grid and you can say save as and you can save it as you want, excel, tab delimited or whatever.
    Thanx,
    Cheers,

  • Export data from a table to text file using srcipt task

    Hi
    i am new to SSIS
    i have to export data from a table and append it into a existing file through SSIS script task
    please help
    Thanks
    Umesh

    Hi Umesh,
    The data structure of the source table and the structure of the destination file are the same, right? Is the destination file a flat file? Do you have to do it through Script Task? If the destination file is a flat file, this can be done easily by using
    the stock tasks/components other than .NET code. In the Data Flow Task, we choose the appropriate source adapter (such as OLE DB Source or ADO.NET Source) to extract data from the source table, perform transformation if necessary, and then load to the destination
    file via a Flat File Destination. When setting up the Flat File Destination, uncheck the “Overwrite data in the file” option so that the extracted data will be appended to the existing file.
    If you need to implement it through Script Task/Component indeed, you may benefit from the following code examples:
    http://stackoverflow.com/questions/8070163/how-to-add-custom-footer-to-an-ssis-flat-file-seperate-component-or-script-tas 
    http://stackoverflow.com/questions/8467326/add-header-and-footer-row-flat-file-ssis 
    If you need further help about the script, I suggest that you ask a new question in .NET forums where you can get more dedicated support:
    http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?category=netdevelopment 
    Regards,
    Mike Yin
    TechNet Community Support

  • SELECT is taking lot of time to fetch data from cluster table BSET

    <Modified the subject line>
    Hi experts,
    I want to fetch data of some fields from bset table but it is taking a lot of time as the table is cluster table.
    Can you please suggest me any other process to fetch data from cluster table. I am using native sql to fetch data.
    Regards,
    SURYA
    Edited by: Suhas Saha on Jun 29, 2011 1:51 PM

    Hi Subhas,
    As per your suggestion I am now using normal SQL statement to select data from BSET but it is still taking much time.
    My SQL statement is :
    SELECT BELNR
                  GJAHR
                  BUZEI
                  MWSKZ
                  HWBAS
                  KSCHL
                  KNUMH FROM BSET INTO CORRESPONDING FIELDS OF TABLE IT_BSET
                  FOR ALL ENTRIES IN IT_BKPF
                  WHERE BELNR = IT_BKPF-BELNR
                      AND BUKRS = IT_BKPF-BUKRS.
    <Added code tags>
    Can you suggest me anymore?
    Regards,
    SURYA
    Edited by: Suhas Saha on Jun 29, 2011 4:16 PM

  • Select from Cluster Table

    Hi,
    I want to read data fields name1 name2 name3 name4 from cluster table BSEC.
    I tried select statement it takes lot of time.
    Let me know if theres a better way.
    Any help will be rewarded with points.
    Thanks,
    blluesh

    Hi,
    Generally Select on cluster table will be very slow especially if u dont pass all the keys. Let me know what are all the fields u are passing to this select in WHERE clause. Also check the transperant table TCJ_CPD which has all name fields.
    Thanks,
    Vinod.

  • How to select data from cluster table

    hi experts,
                   I have a report which picks data from bseg (cluster table ) for a month report it is taking around 4 minutes to process.I feel it is not good when take the report after some months.
    how to select data from these table???how to declare itab for these cluster tables????can we include any search condition or any other kind of internal table???
    please advice.
    mani

    Hi Manikandan,
    The following code may be helpful to understand how to select the data from cluster table.
    Types: Begin of ty_kna1,
    Kunnr type kna1-kunnr,
    adrnr type kna1-adrnr,
    end of ty_kna1,
    begin of ty_bseg,
    belnr type bseg-belnr,
    kunnr type bseg-kunnr,
    end of ty_bseg,
    begin of ty_final,
    belnr type bseg-belnr,
    kunnr type kna1-kunnr,
    adrnr type kna1-adrnr,
    end of ty_final.
    Data: it_kna1 type table of ty_kna1,
    wa_kna1 type ty_kna1,
    it_bseg type table of ty_bseg,
    wa_bseg type ty_bseg,
    it_final type table of ty_final,
    wa_final type ty_final.
    Select kunnr adrnr from kna1 into table it_kna1 where....
    if sy-subrc = 0.
    select belnr kunnr into table it_bseg for all entries in it_kna1 where kunnr = it_kna1-kunnr.
    endif.
    sort it_kna1 by kunnr.
    Loop at it_bseg into wa_bseg.
    move wa_bseg-belnr to wa_final-belnr.
    read table it_kna1 into wa_kna1 with kunnr = wa_bseg-kunnr binary search.
    if sy-subrc = 0.
    move: wa_kna1-kunnr to wa_final-kunnr,
    wa_kna1-belnr to wa_final-belnr.
    endif.
    append wa_final to it_final.
    clear wa_final.
    endloop.
    Loop at it_final into wa_final.
    write: / wa_final-belnr, wa_final-kunnr, wa_final-adrnr.
    endloop.
    Reward if useful.
    Thankyou,
    Regards.

  • Copy contents from Webdynpro Table to Clipboard

    I have a requirement, wherein the contents from the table UI in Webdynpro, in an SRM system, have to be copied to a clipboard. The class CL_PERS_ADMIN->SET_DATA is the hint given for the same.
    Not sure how it works or how to implement this!?!
    Have gone through Web dynpro Selectoption: upload from clipboard and as per Harald's comment have also enabled 'Allow Programmatic clipboard access' in IE.
    Please advice.
    Edited by: Wincy J on Mar 23, 2011 9:30 AM

    Hi Wincy,
    Please check this...
    copy data from table
    Check this u understand
    https://wiki.sdn.sap.com/wiki/display/WDABAP/General+Issues#GeneralIssues-1.190
    Cheers,
    Kris.
    Edited by: kissnas on Mar 23, 2011 9:53 AM

  • Retrieve data from cluster tables

    hi
    can any one explain me how to retrieve data from cluster tables
    Regards
    sachin

    you can write a select
    select * from KONV
           into table it_konv
    where <condition>
    you cant join.. cluster tables..

  • How to fetch data from cluster tables

    hi
    i need to know  how to fetch data from cluster tables please update me if any
    i know that we cannot use joins in cluster table we use view etc
    but i need detailed inforation on methods for fetching data from cluster tables
    regards
    Nishant

    Hi,
        Check the following links
    http://fuller.mit.edu/hr/cluster_tables.html
    The specified item was not found.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33

  • How to access data from Cluster table....?

    Hi Experts,
    Can You plz tell How to import/read data from cluster table? Plz give me the syntaxes also..
    Thanx in advance.

    Types of TABLES and the differences
    Transparent tables
    Pool tables
    Cluster Tables
         From the user point of view, all tables are used to store data and there is no difference in behavior or operation of these tables. All of them can be managed by using the standard OPEN SQL. However from the administrator point of view, transparent tables do exists with the same structure both in the directory as well as the database, exactly with the same data and fields. While other two are not transparent in the sense that they are not manageable directly using database system tools. We cannot use Native SQL statements on these tables. These are logical tables, which are arranged as records of transparent tables.

  • How to check the content of cluster table smw3_bdoc1(00)

    Hi!
    I want to check the business partner changes sending via bdoc from crm to sap.
    For this i want to look into the bdocs.
    I think it's the cluster-table smw3_bdoc1.
    'Cause i don't know which is the name of the structure in the clustd-field i use:
    data: dirtab type table of cdir,
          wa_dirtab like line of dirtab.
    import directory into dirtab from database
                                      smw3_bdoc1(00)
                                      id '49600667F6980046E1008002AC18C6E5'.
    if sy-subrc = 0.
      write  / 'Directory:'.
      loop at dirtab into wa_dirtab.
        write: / wa_dirtab-name,  wa_dirtab-otype, wa_dirtab-ftype,
                 wa_dirtab-tfill, wa_dirtab-fleng.
      endloop.
    else.
      write 'Not found'.
    endif.
    So i've found the directory object "BDOC_BODY".
    Now i want to read the content with:
    data:   iclust type string.
    loop at itbdocid.
         IMPORT BDOC_BODY = iclust FROM DATABASE smw3_bdoc1(00)
                                        ID itbdocid-bdoc_id.
    endloop.
    An error message raises with...
    "error importing the object BDOC_BODY"
    The dump tells me that object types of BDOC_BODY and iclust doesn't match.
    I've changed the field iclust to type xstring... but it's the same error.
    If somebody here can help... Thanks a lot!
    Cheers, Ingo

    Hi,
    Thanks, I can see the data now.I am expecting that data should display in the 2LIS_VDKON extractor.There are two records for particular condition type.Item 10 and Item 20, but in RSA3, it is showing only one record for Item 20 and not showing for Item 10.
    I have cleaned and filled the setup tables, but still no luck.
    Can you please guide me, where else to look?
    Thanks
    Priya

  • Read from cluster table ZL-PCL2

    Hi all,
    I need to read cluster table ZL that stores wage type for pernr. Now previously i was suggested
    FM 'CU_READ_RGDIR'
    FM 'CD_RED_LAST'.
    FM 'PYXX_READ_PAYROLL_RESULT'. But i want to use the statement
    Import from database.
    i have included the file RPC2ZL00.
    then the statement
    Import ZL to ZZL from database PCL2(ZL) ID ZL-KEY.
    Now does anyone have idea abt ZL-KEY??
    means what value i need to feed in ZL-KEy and how do i feed it??
    thanks in advance for all those who help me..
    Reena

    Hi Reena,
    Key is the combination of Pernr & sequence no., which u see it from report display payroll result(HINCLSTR) or RGDIR table.
    Instead of Import statement You can also use macro as below .
      CALL FUNCTION 'CU_READ_RGDIR'
           EXPORTING
                PERSNR          = PERNR-PERNR
           TABLES
                IN_RGDIR        = RGDIR
           EXCEPTIONS
                NO_RECORD_FOUND = 1
                OTHERS          = 2.
      CHECK SY-SUBRC = 0.
      PAY_BEGDA = SEL-BEGDA.
      LOOP AT RGDIR WHERE SRTZA = 'A'  AND VOID = SPACE
                      AND  ( PAYDT >= SEL-BEGDA AND PAYDT <= SEL-ENDDA ).
        IF RGDIR-RUNDT >= PAY_RUNDT.
          MOVE RGDIR-RUNDT TO PAY_RUNDT.
          PAY_BEGDA = RGDIR-FPBEG.
          SEQNR = RGDIR-SEQNR.
        ENDIF.
      ENDLOOP.
      RX-KEY-PERNR = PERNR-PERNR.
      UNPACK SEQNR TO RX-KEY-SEQNO.
      <b>RP-IMP-C2-RU.</b> 
      CHECK RP-IMP-RU-SUBRC = 0.
    Read the cluster table
      LOOP AT CRT.
      ENDLOOP.
      Hope this helps.
    Thanks,
    Sarika.

Maybe you are looking for