Export data from discovery system?

Hi all,
I have tested some scenarios on the discovery system, and would like to apply them on our own system.
Now I have the problem that I have no Customers, Products or anything else which for example I need for the service create sales order.
My Question is:
Is it possible to export the data on the discovery system to my system to avoid creating new ones at my system?

Exporting data is not supported in version 7 and in System 9 and above it only exports in a native format that can be used for reloading. The three ways I know of are Report scripts, MDX expressions run from MAxL(or EAS or Smartview) and Star Analytics integration Server.It is a third party tool and I'm not even sure if it works on version 7 ASO cubes.(I'm preetty sure it does)

Similar Messages

Error MUT-02041 : While exporting the data from Java system.

Dear Friends,
When exporting data from Java system (source system) using SAPINST. We are getting
the below error in 4 of 5 (Archiving SDM Repository) stage.
Error :
MUT-02041 SDM call of createsdmkitjar ends with returncode 2
With this, I am unable to proceed further. Please help me on this to proceed further.
Thanks in advance,
regards,
Srinivas

Hi All,
I could find the below error log from sapinst.log file.
=============
Info: Exclude components as specified
in /usr/sap/IPD/DVD_JAVA/51033746_1/Installation_Master_6.20_6.40_05_08/IM_AIX_PPC64/SAPINST/COMMON/INSTALL/JMIG/EXCLUDE.XML
Info: Resulting JAR
file: /oracle/IPD/sapdata1/data_export/SDM/SDMKIT.JAR
Info: No temporal directory for packing is provided. SDM home directory
will be used.
Info: Pack directory exists already. Remove it first.
Info: Start packing the components of com.gsk in
packedOrigin_com.gsk.jar
Info: Create /usr/sap/IPD/JC02/SDM/program/pack/packedOrigin_com.gsk.jarInfo: The components of com.gsk were successfully packed in
packedOrigin_com.gsk.jar
Info: Start packing the components of local in packedOrigin_local.jar
Info: Create /usr/sap/IPD/JC02/SDM/program/pack/packedOrigin_local.jar
Info: Create /oracle/IPD/sapdata1/data_export/SDM/SDMKIT.JAR
Warning: Warning during command execution: No metadata files exist for
development
component 'revtrac_agu11'/'local'/'LOKAL'/'0.2009.08.11.10.56.14'/'0'.
Cannot pack this archive.
No metadata files exist for development
component 'revtrac_aug13eartest'/'local'/'LOKAL'/'0.2009.08.13.14.44.25'/'0'. Cannot pack this archive.
No metadata files exist for development
component 'Aug10_09'/'local'/'LOKAL'/'0.2009.08.10.14.39.29'/'0'.
Cannot pack this archive.
No metadata files exist for development
component 'Aug14'/'local'/'LOKAL'/'0.2009.08.14.10.46.38'/'0'. Cannot
pack this archive.
No metadata files exist for development
component 'Aug14two'/'local'/'LOKAL'/'0.2009.08.14.10.55.21'/'0'.
Cannot pack this archive.
No metadata files exist for development
component 'revtrac_aug11b'/'local'/'LOKAL'/'0.2009.08.13.14.36.43'/'0'.
Cannot pack this archive.
Missing archives may lead to errors after the packed SDM installation
has been extracted later.
Info: This SDM installation has been packed
to /oracle/IPD/sapdata1/data_export/SDM/SDMKIT.JAR
To unpack this installation again,
extract /oracle/IPD/sapdata1/data_export/SDM/SDMKIT.JAR and invoke the
SDM command install with parameter extractpackedinst=true
Executed, but finished with warning(s). Return code: 2
Error: Executed, but finished with warning(s). Return code: 2
ERROR 2010-10-21 15:54:48
MUT-02041 SDM call of createsdmkitjar ends with returncode 2
=============
Can you please check this and help me on this to proceed further.
thanks..
Srinivas

Not been able to export data from FDQM to target system

Hi,
Am not been able to export data from FDQM to my target system which is Hyperion Enterprise 6.4
I have imported, Validated the mapping but as soon as i click on export after creation of the export file the system throws an error as "*Error: Arguments are of the wrong type, are out of acceptable range, or are in conflict with one* *another*". Also am pasting the error log down below
** Begin Enterprise Adapter Runtime Error Log Entry [2009-08-20-16:10:27] **
ERROR:
Code.............. 10230
Description....... Data Load Errors.
Enterprise API Return Code: ALREADY_LOCKED_RO-.
Procedure......... clsHPDataManipulation.fDBLoad
Component......... upsHE6xG4A
Version........... 100
Thread............ 6028
IDENTIFICATION:
User.............. administrator
Computer Name..... HYPERION
ENTERPRISE CONNECTION:
App Name.......... GCIP_S
Connect Status.... Connection Open
GLOBALS:
Zero-For-No....... True
INI File Path..... C:\WINDOWS\HypEnt.ini
NameCat.txt Path.. C:\Hyperion\FDM\GCIP\Outbox\Logs\NameCat.txt
NameCat Entity....
NameCat Category..
NameCat Exists.... False
Any suggestions any one, what should i do

Hello,
Is it possible that the entity that you are loading to in Enterprise is locked? It appears that it may be per the below error. You can only load to unlocked intersections, so I would start by checking the catagory and entity combination for being locked.
Regards
JF

Export data from ABAP report to SAP BW system

Hi Everyone,
I have requirement to export data from the R/3 system from a ABAP report to BW system.
Currently we are planning to create a Ztable to put the data into that, but I would like to know , is there a better way to do instead of going for a Ztable.
Regards,
Shobana.K

Hi Shobana,
is possible define a data-source in RSO2 with Function module as source.
In this function module you define a table. During the loading data in BW from this datasource the system execute this function module and transfer the line of that table.
In the function module you can repeat the code of the abap program.
You can see the function module example (RSAX_BIW_GET_DATA_SIMPLE).
Regards.
Paolo Ardemagni

Exporting data from R/3 system as IDOCs

As I am working with MDM and not familar with R/3 very much, is there any manual or baisic guidlines how to export master data as IDOCs from R/3 ?
Thank you in advance

Hi Vytas,
to send the data from R3 system to MDM System, you need to follow procedure as mentioned below:
1. you can use the transaction "MDMGX" in R3 system to extract the refrence data to the mdm system via FTP Server.generally this transaction is used to extract the lookup tables data into the repository.
for using this, you can use the option there in transaction MDMGX as "Define repositories and FTP Server" and configure all the required details and you have to install the ftp server on MDM server.then to extract the data, there is a option as "Start Extraction" and your data will be extracted from R3 to MDM inbound port via FTP Server.
for further details about MDMGX, you can refer SAP Note No-964991.
2. to extract the main table data from R3 to MDM, you can use the transaction "MDM_CLNT_EXTR".
for detail info about this transaction, just refer the SAP Note No.-836985, 1035601, 844558.
both transaction will be used for extracting the data from R3 to MDM as per your business requirement.
I hope, this will help you.
any further info, just let me know.
Regards,
Saurabh...
Reward with points if found helpful.

Export data from the R/3 system from a ABAP report to BW system

Hi Everyone,
I have requirement to export data from the R/3 system from a ABAP report to BW system.
Currently we are planning to create a Ztable to put the data into that, but I would like to know , is there a better way to do instead of going for a Ztable.
Regards,
Shobana.K

Hi Shobha,
In the second option as you mentioned sending the data to BI.
1. Check when u click on second option what is the target details that is showing?( Menas suppose if you send the data using Open Hub u will find the options like FF,Otherparty,etcc...).
2. As you mentioned if you have option to upload the data to Table.Then you can load and u can create the Generic DS.
Issues & Concern
            1. Need to think how the data will be poplated(Means how are going to maintain Delta info records table level before
               populating to it)
             2. whether Ztable should be refreshed before updating R/3 report data to Ztable.
Based on the concerns verify your scenario.If everything ok then u can proceed as per u r plan.
Regards
Ram.

Export data from database table before database migration

Hello,
We are planning to migrate our SAP ERP 6 Ehp4/NW7.01 from Oracle 11.2 to IBM DB2 v. 9.7 database. During test migrations I have established that we spend a lot of time for one particular table (COEP). Because we donu2019t have possibility to archive this table before migration I have an idea to export data from previous years from this table to the file system (using an ABAP report), delete those data from table before migration and then after migration, import back to the database from the file system.
Does anybody have any concerns or suggestions about this idea?
Thank you for your answers
Andrej

Hello Andrej,
I strongly do not recommend to do so.
I am not sure whether technically this could work at all..
Even it if would work .. In order to really save time, the export and the import would have to be a dirty one (meaning the system is operational and in production). With this there is a high risk to produce inconsistencies on this table. And you most likely will receive no support if something unforeseen happens and you end with problems.
Also your approach (if it should work at all) , would have to be tested thoroughly by you , also protecting the table from any changes.
I do not believe that this can save any effort compared to implementing advanced migration techniques like table splitting.
On top, you would go high risk to end with an unsupported system, with not using official migration procedures
Hans-Juergen

Reg:when i was uploading data from legacy system

Hi All,
it is any Include program
for tcode mpr1
when i was upload the data for forecast values from
legacy system to sap system .
only one record is geting updated
other records are not updateding
i have retun logic like this
code,,,,,,,,
TYPES: BEGIN OF TY_FILE,
 WERKS LIKE MAPR-WERKS,
 MATNR LIKE MAPR-MATNR,
 PRWRT LIKE PROW-PRWRT,
 END OF TY_FILE.
DATA: IT_FILE TYPE STANDARD TABLE OF TY_FILE,
 WA_FILE TYPE TY_FILE.
DATA : IT_MARA LIKE MARA OCCURS 0 WITH HEADER LINE,
 IT_MARC LIKE MARC OCCURS 0 WITH HEADER LINE.
DATA : LV_FILE TYPE STRING.
LV_FILE = I_MPR1USERPAR.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>GUI_UPLOAD
EXPORTING
 FILENAME = LV_FILE
 FILETYPE = 'DAT'
 HAS_FIELD_SEPARATOR = 'X'
CHANGING
 DATA_TAB = IT_FILE
EXCEPTIONS
 FILE_OPEN_ERROR = 1
 FILE_READ_ERROR = 2
 NO_BATCH = 3
 GUI_REFUSE_FILETRANSFER = 4
 INVALID_TYPE = 5
 NO_AUTHORITY = 6
 UNKNOWN_ERROR = 7
 BAD_DATA_FORMAT = 8
 HEADER_NOT_ALLOWED = 9
 SEPARATOR_NOT_ALLOWED = 10
 HEADER_TOO_LONG = 11
 UNKNOWN_DP_ERROR = 12
 ACCESS_DENIED = 13
 DP_OUT_OF_MEMORY = 14
 DISK_FULL = 15
 DP_TIMEOUT = 16
 NOT_SUPPORTED_BY_GUI = 17
 ERROR_NO_GUI = 18
 OTHERS = 19
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT T_ARTICLES.
 CLEAR : IT_MARA,IT_MARC.
 SELECT SINGLE * FROM MARA INTO IT_MARA WHERE MATNR = T_ARTICLES-MATNR.
 SELECT SINGLE * FROM MARC INTO IT_MARC WHERE MATNR = T_ARTICLES-MATNR
 AND WERKS = T_ARTICLES-WERKS.
ENDLOOP.
LOOP AT IT_FILE INTO WA_FILE .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
 EXPORTING
 INPUT = WA_FILE-MATNR
 IMPORTING
 OUTPUT = WA_FILE-MATNR.
T_FORECAST_VALUES-WERKS = WA_FILE-WERKS.
T_FORECAST_VALUES-MATNR = WA_FILE-MATNR.
T_FORECAST_VALUES-PERKZ = IT_MARC-PERKZ.
T_FORECAST_VALUES-ERTAG = T_ARTICLES-PRDAT_NEW.
T_FORECAST_VALUES-KOPRW = WA_FILE-PRWRT.
T_FORECAST_VALUES-MEINS = IT_MARA-MEINS.
APPEND T_FORECAST_VALUES.
CLEAR : T_FORECAST_VALUES.
ENDLOOP.
thanks
mars

For creating/uploading the master data from legacy system to SAP we either use below options
1. BDC (recording)
2. BAPI
3. ALE iDoc.
I would sugguest you to use BAPI and there's already this post which explains few details about the BAPI:
Problems with BAPI_PROJECT_MAINTAIN
Regards
Sreenivas

Error while exporting data from HCM to VDS

Hi,
When i am trying to export data from the SAP HCM system using the RPLDAP_EXTRACT, the export fails and the log shows that the LDAP_CREATE failed. In the VDS log,
com.sap.idm.vds.oper.main_listener Message:
Exception on add: class java.lang.Integer:null incompatible with class
java.lang.String:null
I verified the database connectivity from VDS to IDS when seems fine since the LDAP_SEARCH is working fine.
Cheers !
Zaheer

It was a bug in SP2, it is fixed in SP2 Patch 4.
Cheers !!
Zaheer

Export data from BW to oralce with open hub service.

Hi Dear all,
When I tried to export data from BW to oralce with open hub service. There is no available RFC destination for this oracle system. That means i need to create a RFC destination for the oracle server.
How can i achive this, in SM59? But U don't know much how to configure this. Is there any expert can help me there?
Kevin

Hi kevinhuang ,
RFC connection.......... You can check in SM59 tcode...Double click on the the desired Source system
or
RSA1-->Source systems and then right click on Source system and Check
To test RFC connection...RSA1 ....Source system....... Right click on desired source system >> Connection Parameter.....Test connection
Pls go thru this links,
http://help.sap.com/saphelp_nw70/helpdata/EN/43/79f902dfb06fc9e10000000a1553f6/frameset.htm
BI Open Hub Destination and data transfer process setup
http://www.ibm.com/developerworks/data/library/techarticle/dm-0802li/index.html
Hope this helps U.
Regards
Chandra Sekhar
Edited by: Chandra Sekhar T on Apr 21, 2009 3:36 PM

Export data from block to excel.

Hi
Does anybody know how I can export data from oracle forms to an excel worksheet. I need to provide a direct interface for a user where he fetches the data into the block and by just click a button the data from the block should go to an excel sheet.
Thanks in advance
-Samsam

Something along the following lines should help you in you are Client/Server. If you're on the Web then make sure you have WebUtil set up and add "CLIENT_" to all the OLE2 calls.
PROCEDURE P_EXCEL IS
     application ole2.Obj_Type;
     workbooks ole2.Obj_Type;
     workbook ole2.Obj_Type;
     worksheets ole2.Obj_Type;
     worksheet ole2.Obj_Type;
     args ole2.List_Type;
     cell ole2.Obj_Type;
     j INTEGER;
     k INTEGER;
     file_name_cl VARCHAR2(32767);
     item_prompt VARCHAR2(32767);
user_cancel EXCEPTION;
BEGIN
-- open the java save file dialogue box
file_name_cl := GET_FILE_NAME('H:\', 'file_name.xls', 'XLS Files (*.xls)|*.xls|', NULL, SAVE_FILE, TRUE);
file_name_cl := SUBSTR(file_name_cl,1,LENGTH(file_name_cl));
IF file_name_cl IS NULL THEN
RAISE user_cancel;
END IF;
application := ole2.create_obj('Excel.Application');
workbooks := ole2.Get_Obj_Property(application, 'Workbooks');
workbook := ole2.Invoke_Obj(workbooks, 'Add');
worksheets := ole2.Get_Obj_Property(workbook, 'Worksheets');
worksheet := ole2.Invoke_Obj(worksheets, 'Add');
go_block('EXPORT_BLOCK');
first_record;
j:=1; /* Represents row number */
k:=1; /* Represemts column number */
/* Add the column headings using item prompts */
     FOR k IN 1..10 /* Block has 10 visible columns */
LOOP
item_prompt := get_item_property(:SYSTEM.CURRENT_BLOCK||'.'||:SYSTEM.CURRENT_ITEM, prompt_text);
args:=ole2.create_arglist;
ole2.add_arg(args, j);
ole2.add_arg(args, k);
cell:=ole2.get_obj_property(worksheet, 'Cells', args);
ole2.destroy_arglist(args);
ole2.set_property(cell, 'Value', item_prompt);
ole2.release_obj(cell);
next_item;
END LOOP;
j:=j+1; /* Add to rowcount so that data won't overwrite column headings! */
LOOP
/* Add in all the data */
FOR k IN 1..10 /* Block has 10 visible columns */
LOOP
IF NOT name_in(:system.cursor_item) IS NULL THEN
args:=ole2.create_arglist;
ole2.add_arg(args, j);
ole2.add_arg(args, k);
cell:=ole2.get_obj_property(worksheet, 'Cells', args);
ole2.destroy_arglist(args);
ole2.set_property(cell, 'Value', name_in(:system.cursor_item));
ole2.release_obj(cell);
END IF;
next_item;
END LOOP;
j:=j+1;
IF :system.last_record = 'TRUE' THEN
     exit;
ELSE
     next_record;
END IF;
END LOOP;
     ole2.Release_Obj(worksheet);
     ole2.Release_Obj(worksheets);
     /* Save the Excel file created */
     args := ole2.Create_Arglist;
     ole2.Add_Arg(args, file_name_cl);
     ole2.Invoke(workbook, 'SaveAs', args);
     ole2.Destroy_Arglist(args);
     /* release workbook */
     ole2.Release_Obj(workbook);
     ole2.Release_Obj(workbooks);
     /* Release application */
     ole2.Invoke(application, 'Quit');
     ole2.Release_Obj(application);
EXCEPTION
WHEN user_cancel THEN
     RAISE;
END;

Looking for a solution or service to export data from a dynamic form into a database

As the title of this discussion states, I'm looking for a solution or service to export data from a dynamic form into a database to be used for reporting. Creating the dynamic form is not a problem, it's getting it into a database that's more of a nuisance. A dynamic form is needed in order to provide skip logic, hide/reveal, and other similar dynamic features.
The database hasn't been created, so just looking for the easiest, more effective and dependable solution. The key is being able to run reports off the data later.

So i set up 2 residential grade routers to test this out. Seems to be working okayish. I believe with directional antenae routers I should achieve what I need.
As for security I configured each device separately. I set them so only allow the MAC address of the other through wireless. This seems to be the best system for me. Once they are connected even if a MAC is spoofed of the other router it drops automatically because they are always connected. My wired devices get plugged in and recieve an IP from my main network.
There more testing to be done, but it seems to be working.
Thanks for your input and suggestions guys. I will be marking this topic as answered.

Exporting Data from one Server to Another server w/ Version Enabled Tables

Hi,
I'm currently having a problem with regards to Exporting data to another server. This is the Scenario:
Source Server is Production Server with all of its Tables in the Schema are Version-Enabled.
Destination Server is a Test Server.
I exported data from Production Server using EXP command. Then in my Test Server I imported my data using IMP command (I already created tablespace and user for the Schema).
Import is successful in my Test server but when I execute my queries, There are no rows returned.
I checked my _LT tables and it contains my data. but when I query from the View created when version was enabled, no result is returned.
Am I missing something when I exported and imported my Schema? Should I have included the WMSYS schema when I created the .dump file?
Thanks in advance.

Hi Stefan,
we tried using Export and Import using Data Pump.
expdp system/password@orcl full=y directory=dmpdir2 dumpfile=FULL_DB.dmp
impdp system/password@orcl full=y table_exists_action=truncate directory=dmpdir2 dumpfile=FULL_DB.dmp
Still the same result as using exp and imp. _LT tables have data but when you query using the View, no results are found.

Printing or exporting files from remote system running SAP

Hi to everyone,
I am trying to print or save exported data from SAP (in Excel)to a remote system where I am working. SAP is running in a remote server to which I am connected. So far I have only been able to print and save in the remote system (where SAP is running ), but can't do it to my printer/PC. It is probably a simple problem but I can't see an answer.
Thank very much to anyone who can give me a clue.
Antonio

check if printer LP02 or similar is defined on your SAP system. It prints via SAPLPD to your local printer.
To save anything to your local PC - you can use "save to local file" from the report, or WS_DOWNLOAD FM from ABAP.

Can not export data from form tracker

Hi there,
I have set up a lovely form for collecting data. It all comes into the Adobe Tracker and the Responses file fine.
What i wish to do is export data from the responses file into another format. I should be able to do it from the Export button on the left but it is 'blanked out' and does nothing if I push it. I can't find any details on here or the internet relating to this. And yes, there is data in the file to export .
Hoping you can help.
Many thanks in advance.

I have the same problem but... I created two forms for two separate purposes and have had responses to both.
One of them allows me to export the data and the other does not.
Does anyone out there have an answer for this seemingly random anomoly?
Regards
Sydman

Export data from discovery system?

Similar Messages

Maybe you are looking for