Export Data Sets as jpgs?

Is there a way to export data sets as jpgs instead of psd? The whole point is fast file creation and having a folder full of new psds which I then have to convert to jpg is kinda a silly step. Am I missing something?

I think because of the way variables work (at least the data set part), they need layers
( files that are not flattened) and jpegs don't support layers.
http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-7417a.h tml
If your intention is saving different variations of your opened
file, you could use layer comps.
http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-7870a.h tml
Then use export layer comps to files under the scripts menu.
MTSTUNER

Similar Messages

  • Exporting Data Sets as Files in CS5

    Why would CS5 crash every time I try to export Data Sets as files? I have been just doing it in CS2 because of the problem. However, CS2 is acting up for some reason at the moment.
    If CS2 where working, as it has in the past, then the exact same sets would export easily from there but not CS5. Is there any way to fix this problem?

    Hello,
    Yes I am running the latest version, on a mac. The Data Set is moderately sized, about 30 sets with 5 perameters (sorry if that is not exactly what they are usually called). It crashes while the data set is processing. After it saves a couple of files the system crashes. Sometimes it makes it a bit further, but never all the way through a whole set. CS2 is having all sorts of problems for me all of the sudden. I am going to look for my disk to unintstall then reinstall. It can't open files from File/Open and crashes within minutes of opening, even if I'm not doing anything with it yet. The only reason I have it is to run the Data Sets so I just hope I can find my install disk.
    Thanks for any help!

  • PSD files created using export data set fail to import into lightroom

    If I create a set of files using variables in a data set, the PSD files won't import into LightRoom. LR says to resave with maximum compatibility, but I already have that set in Photoshop. If I open one of the files and resave it, it will import. Perhaps PS isn't honoring the maximize compatibility setting when exporting.

    Hi,
    I downloaded 10g database ver 10.2.0.1.0 from oracle site and installed it on my laptop. I took an export of schema which was on my 9i database ver 9.2.0.1.0 using 9i exp, created tablespace and user in the 10gdb and tried to import the same to 10gdb using 10g imp using the following.
    imp system/pswd@10gdb fromuser=test touser=test file=expdat.dmp log=expdat.log
    it displays
    .importing SYSTEM'S objects into SYSTEM
    .importing TEST'S objects into TEST
    and it doesnt import any objects just hangs. The Log file does'nt have any entries.
    Can anyone help me.
    Thanks in advance
    Smdas

  • Why would only the first line of my data set txt file work?

    Hi -
    I had a lot of success using variables and external data sets until today.
    I have an external text file that I have imported as a data set (Image/Variables/Data Sets/Import...).  All of the variables have been defined and confirmed (at least PSD hasn't told me it can't find something which is the typical error msg.)
    This external text file, with the extension ".txt" has 12 lines on it, each line is 7 comma separated values, and each line is ending in a carriage return.
    YESTERDAY when I used File/Export/Export Data Set as Files... the procedure went beautifully for the 8 times I used it.  TODAY I only get the first of the 12 lines completed and then the export stops.  There are no error messages or other signs that Photoshop has choked on something so I guess something is wrong with my text file... BUT WHAT??
    Any insight on any step in this would be helpful.  You all know that if I'm using this feature it's because I have TONS of repetition ahead of me if it doesn't work.
    TIA your expertise,
    JL

    Fixed it!
    When Exporting as Data sets as files... the step I missed was to select "All Data Sets" from the Data Set drop down.
    Thanks all.
    JL

  • Secret data sets and variables in photoshop elements.

    In photoshop elements 4 thru 8, you can use data sets
    and variables, with the actions recorded for them in
    photoshop and then installed into photoshop elements.
    They work exactly like they do in photoshop and in fact
    there is already a menu item in photoshop elements,
    under in export menu, called export data sets as files.

    Not sure a I read you correctly but if I understand you
    what you have to do is make the first two images as dynamic variables using the variable panel and save it as a data set
    then replace those two images and save those as a data set
    So now you have data set one and two.
    You can save that as an variable library (xml)and that can be loaded into other documents.
    The question is can it be actioned?
    It can be scripted and do you want the same two images to replace the same two image in each document.
    I think you really have to tell us more.

  • Exporting Data for a single set of books from Oracle Financials

    I have a multiorg set-up with multiple set of books in an Oracle instance. I want to be able to export data for a single set of books into a new Oracle instance.
    Any insight into how this can be done (without going through each of the tables and referential integrity constraints) will be of great help
    thanks
    anoop

    It is a bit unclear what you are sending these POs to the other system for? Is it for matching to invoices there? Is it for receiving into inventory there?
    Are these two entities belong to the same parent but on two different oracle apps databases?
    In essence what do they do with the PO that you are sending to them?
    Why do you think there will be intercompany invoicing?
    Thanks
    Nagamohan

  • Export Indd to EPS/JPG and set the file name  for EPS/JPG file

    Hi,
       When I export the INDD to JPG/EPS, I want to set the file name with pageNumber  for JPG/EPS files using javascript.
    For Example
    If I set the file name as EPSFile.eps, after exporting the indd(with 2 pages) to eps
    ,files are generating in the following name EPSFile_1.eps, EPSFile_2.eps.
    but I want to set the file name as EPSFile_001.eps and EPSFile_002.eps using javascript.
    anyone knows please reply for this.
    Regards,
    Mubeen

    Hi,
      I tried the following code.
    var JPGe = new File("Applications/PDF/JPG/file.jp");
    app.activeDocument.exportFile(ExportFormat.jpg, );
    when I use this code ,exported jpg file names are
    file.jpg, file1.jpg,file3.jpg.
    but ,I want the output file names as file_001,file_002,file_003,
    Thanks,
    Mubeen

  • XYGraph: export minimized data set for same plot form

    hello all
    we are loading about 50'000 data points into a XY Graph.
    Assuming that the graph is 1'000 pixel wide and the line width of the plot is in minimum 1 pixel, we see about every 50th value when looking at the whole horizontal range of the data set.
    that's fine.
    now we would like to export the data into a further processing where only the visual aspect of the plot is important.
    if we use the initial data set of 50'000 values it needs much time. and most of the data is not important (not visible) because there are stucked, hidden behind the 1'000 visible data points.
    so we look for a way to use only the most important values, the 1000 points which are shown as own pixels in the forground. like the plot itself when exporting it to a bitmap for example.
    filtering out every 50th point does not seem a good way because the original form of the plot can be tampered. we assumed it at least and think that is not the way Labview handles the graph visualisation.
    Does anyone know how Labview builds and optimize the graph build up or how a minimized data set with the same plot form can be made out of the whole set?
    thanks for any help
    best, mischl

    Hi,
    the algorithm how Labview builds and optimize the graph is not published. Attached you find an example how you can minimize data for export. A typical usage in application is therefore finding peaks, which could be filtered out by the actual graph visualizaiton. 
    Dont heasitate to ask again if you have any new quesitons concerning the subject.
    Best Regards, Fabian

  • Open data set and close data set

    hi all,
    i have some doubt in open/read/close data set
    how to transfer data from internal table to sequential file, how we find sequential file.
    thanks and regards
    chaitanya

    Hi Chaitanya,
    Refer Sample Code:
    constants:   c_split         TYPE c
                               VALUE cl_abap_char_utilities=>horizontal_tab,
               c_path          TYPE char100
                               VALUE '/local/data/interface/A28/DM/OUT'.
    Selection Screen
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
    PARAMETERS : rb_pc    RADIOBUTTON GROUP r1 DEFAULT 'X'
                                    USER-COMMAND ucomm,    "For Presentation
                 p_f1     LIKE rlgrap-filename
                                          MODIF ID rb1,    "Input File
                 rb_srv   RADIOBUTTON GROUP r1,             "For Application
                 p_f2     LIKE rlgrap-filename
                                         MODIF ID rb2,     "Input File
                 p_direct TYPE char128 MODIF ID abc DEFAULT c_path.
                                                           "File directory
    SELECTION-SCREEN END OF BLOCK b1.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_f1.
    *-- Browse Presentation Server
      PERFORM f1000_browse_presentation_file.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_f2.
    *-- Browse Application Server
      PERFORM f1001_browse_appl_file.
    AT SELECTION-SCREEN OUTPUT.
      LOOP AT SCREEN.
        IF rb_pc = 'X' AND screen-group1 = 'RB2'.
          screen-input = '0'.
          MODIFY SCREEN.
        ELSEIF rb_srv = 'X' AND screen-group1 = 'RB1'.
          screen-input = '0'.
          MODIFY SCREEN.
        ENDIF.
        IF screen-group1 = 'ABC'.
          screen-input = '0'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    *&      Form  f1000_browse_presentation_file
          Pick up the filepath for the file in the presentation server
    FORM f1000_browse_presentation_file .
      CONSTANTS: lcl_path TYPE char20 VALUE 'C:'.
      CALL FUNCTION 'WS_FILENAME_GET'
        EXPORTING
          def_path         = lcl_path
          mask             = c_mask  "',.,..'
          mode             = c_mode
          title            = text-006
        IMPORTING
          filename         = p_f1
        EXCEPTIONS
          inv_winsys       = 1
          no_batch         = 2
          selection_cancel = 3
          selection_error  = 4
          OTHERS           = 5.
      IF sy-subrc <> 0.
       MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
               WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        flg_pre = c_x.
      ENDIF.
    ENDFORM.                    " f1000_browse_presentation_file
    *&      Form  f1001_browse_appl_file
       Pick up the file path for the file in the application server
    FORM f1001_browse_appl_file .
      DATA:  lcl_directory  TYPE char128.
      lcl_directory  = p_direct.
      CALL FUNCTION '/SAPDMC/LSM_F4_SERVER_FILE'
        EXPORTING
          directory        = lcl_directory
          filemask         = c_mask
        IMPORTING
          serverfile       = p_f2
        EXCEPTIONS
          canceled_by_user = 1
          OTHERS           = 2.
      IF sy-subrc <> 0.
       MESSAGE e000(zmm) WITH text-039.
       flg_app = 'X'.
      ENDIF.
    ENDFORM.                    " f1001_browse_appl_file
    *&      Form  f1003_pre_file
        Upload the file from the presentation server
    FORM f1003_pre_file .
      DATA: lcl_filename TYPE string.
      lcl_filename = p_f1.
      IF p_f1 IS NOT INITIAL.
        CALL FUNCTION 'GUI_UPLOAD'
          EXPORTING
            filename                = lcl_filename
            filetype                = 'ASC'
            has_field_separator     = 'X'
          TABLES
            data_tab                = i_input
          EXCEPTIONS
            file_open_error         = 1
            file_read_error         = 2
            no_batch                = 3
            gui_refuse_filetransfer = 4
            invalid_type            = 5
            no_authority            = 6
            unknown_error           = 7
            bad_data_format         = 8
            header_not_allowed      = 9
            separator_not_allowed   = 10
            header_too_long         = 11
            unknown_dp_error        = 12
            access_denied           = 13
            dp_out_of_memory        = 14
            disk_full               = 15
            dp_timeout              = 16
            OTHERS                  = 17.
        IF sy-subrc <> 0.
          MESSAGE s000 WITH text-031.
          EXIT.
        ENDIF.
      ELSE.
       PERFORM populate_error_log USING space
                                        text-023.
      ENDIF.
    ENDFORM.                    " f1003_pre_file
    *&      Form  f1004_app_file
         upload the file from the application server
    FORM f1004_app_file .
      REFRESH: i_input.
      OPEN DATASET p_f2 IN TEXT MODE ENCODING DEFAULT FOR INPUT.
      IF sy-subrc EQ 0.
        DO.
          READ DATASET p_f2 INTO  wa_input_rec.
          IF sy-subrc EQ 0.
    *-- Split The CSV record into Work Area
            PERFORM f0025_record_split.
    *-- Populate internal table.
            APPEND wa_input TO i_input.
            CLEAR wa_input.
            IF sy-subrc <> 0.
              MESSAGE s000 WITH text-030.
              EXIT.
            ENDIF.
          ELSE.
            EXIT.
          ENDIF.
        ENDDO.
      ENDIF.
    ENDFORM. " f1004_app_file
    Move the assembly layer file into the work area
    FORM f0025_record_split .
      CLEAR wa_input.
      SPLIT wa_input_rec AT c_split INTO
        wa_input-legacykey
        wa_input-bu_partner
        wa_input-anlage.
    ENDFORM.                    " f0025_record_split
    Reward points if this helps.
    Manish

  • Can not export data from form tracker

    Hi there,
         I have set up a lovely form for collecting data. It all comes into the Adobe Tracker and the Responses file fine.
         What i wish to do is export data from the responses file into another format. I should be able to do it from the Export button on the left but it is 'blanked out' and does nothing if I push it. I can't find any details on here or the internet relating to this. And yes, there is data in the file to export .
    Hoping you can help.
    Many thanks in advance.

    I have the same problem but... I created two forms for two separate purposes and have had responses to both.
    One of them allows me to export the data and the other does not.
    Does anyone out there have an answer for this seemingly random anomoly?
    Regards
    Sydman

  • Download using open data set and close data set

    can any body please send some sample pgm using open data set and close data set .the data should get downloaded in application server
    very simple pgm needed

    Hi Arun,
    See the Sample code for BDC using OPEN DATASET.
    report ZSDBDCP_PRICING no standard page heading
    line-size 255.
    include zbdcrecx1.
    *--Internal Table To hold condition records data from flat file.
    Data: begin of it_pricing occurs 0,
    key(4),
    f1(4),
    f2(4),
    f3(2),
    f4(18),
    f5(16),
    end of it_pricing.
    *--Internal Table To hold condition records header .
    data : begin of it_header occurs 0,
    key(4),
    f1(4),
    f2(4),
    f3(2),
    end of it_header.
    *--Internal Table To hold condition records details .
    data : begin of it_details occurs 0,
    key(4),
    f4(18),
    f5(16),
    end of it_details.
    data : v_sno(2),
    v_rows type i,
    v_fname(40).
    start-of-selection.
    refresh : it_pricing,it_header,it_details.
    clear : it_pricing,it_header,it_details.
    CALL FUNCTION 'UPLOAD'
    EXPORTING
    FILENAME = 'C:\WINDOWS\Desktop\pricing.txt'
    FILETYPE = 'DAT'
    TABLES
    DATA_TAB = it_pricing
    EXCEPTIONS
    CONVERSION_ERROR = 1
    INVALID_TABLE_WIDTH = 2
    INVALID_TYPE = 3
    NO_BATCH = 4
    UNKNOWN_ERROR = 5
    GUI_REFUSE_FILETRANSFER = 6
    OTHERS = 7.
    WRITE : / 'Condition Records ', P_FNAME, ' on ', SY-DATUM.
    OPEN DATASET P_FNAME FOR INPUT IN TEXT MODE.
    if sy-subrc ne 0.
    write : / 'File could not be uploaded.. Check file name.'.
    stop.
    endif.
    CLEAR : it_pricing[], it_pricing.
    DO.
    READ DATASET P_FNAME INTO V_STR.
    IF SY-SUBRC NE 0.
    EXIT.
    ENDIF.
    write v_str.
    translate v_str using '#/'.
    SPLIT V_STR AT ',' INTO it_pricing-key
    it_pricing-F1 it_pricing-F2 it_pricing-F3
    it_pricing-F4 it_pricing-F5 .
    APPEND it_pricing.
    CLEAR it_pricing.
    ENDDO.
    IF it_pricing[] IS INITIAL.
    WRITE : / 'No data found to upload'.
    STOP.
    ENDIF.
    loop at it_pricing.
    At new key.
    read table it_pricing index sy-tabix.
    move-corresponding it_pricing to it_header.
    append it_header.
    clear it_header.
    endat.
    move-corresponding it_pricing to it_details.
    append it_details.
    clear it_details.
    endloop.
    perform open_group.
    v_rows = sy-srows - 8.
    loop at it_header.
    perform bdc_dynpro using 'SAPMV13A' '0100'.
    perform bdc_field using 'BDC_CURSOR'
    'RV13A-KSCHL'.
    perform bdc_field using 'BDC_OKCODE'
    '/00'.
    perform bdc_field using 'RV13A-KSCHL'
    it_header-f1.
    perform bdc_dynpro using 'SAPMV13A' '1004'.
    perform bdc_field using 'BDC_CURSOR'
    'KONP-KBETR(01)'.
    perform bdc_field using 'BDC_OKCODE'
    '/00'.
    perform bdc_field using 'KOMG-VKORG'
    it_header-f2.
    perform bdc_field using 'KOMG-VTWEG'
    it_header-f3.
    **Table Control
    v_sno = 0.
    loop at it_details where key eq it_header-key.
    v_sno = v_sno + 1.
    clear v_fname.
    CONCATENATE 'KOMG-MATNR(' V_SNO ')' INTO V_FNAME.
    perform bdc_field using v_fname
    it_details-f4.
    clear v_fname.
    CONCATENATE 'KONP-KBETR(' V_SNO ')' INTO V_FNAME.
    perform bdc_field using v_fname
    it_details-f5.
    if v_sno eq v_rows.
    v_sno = 0.
    perform bdc_dynpro using 'SAPMV13A' '1004'.
    perform bdc_field using 'BDC_OKCODE'
    '=P+'.
    perform bdc_dynpro using 'SAPMV13A' '1004'.
    perform bdc_field using 'BDC_OKCODE'
    '/00'.
    endif.
    endloop.
    *--Save
    perform bdc_dynpro using 'SAPMV13A' '1004'.
    perform bdc_field using 'BDC_OKCODE'
    '=SICH'.
    perform bdc_transaction using 'VK11'.
    endloop.
    perform close_group.
    Hope this resolves your query.
    Reward all the helpful answers.
    Regards

  • Help with exporting data from pdf form

    I have about 100 pdf forms that I created in adobe forms central and distributed as a pdf form (rather than on the web). I am trying to export the data into a spreadsheet but when I export it, the fields are all jumbled in the csv file, as in they are not in the same order. I need to export the data all together so I'm going to the forms menu and selecting "manage form data" and then selecting "merge data files into spreadsheet". I tried exporting a single file but that gave me something really weird.
    Please help, I have a deadline next week to analyze this data and can't make sense of it once it is exported to a spreadsheet.

    Would you please share your form with me and send me one of your pdf forms and some of the csv files?
    You can share your form by doing the following:
    1. Click on the “Share” icon on the bottom left corner.
    2. Click on “Add Collaborator” on the popup menu.
    3. Enter [email protected] under “People to share with”.
    4. Set subject to "Export data from pdf form"
    5. Click the “Share” button on the bottom right of the dialog.
    Thanks
    Ken

  • Help with exporting gradient background as jpg

    Hi there! I'm totally new to this forum & very new to
    fireworks, so go easy on me!
    I am designing for QVGA smartphone/PPc screens & find
    that when I create a gradient in fireworks MX (version 6) &
    then export it as a jpg, on the phone/PPC screen the gradient is
    filled with big blocks of colour rather than smooth transitions
    between them, making the overall effect more like lines or blacks
    of colour than a smooth gradient. I am exporting the jpgs at the
    highest quality settings (100%).
    Can someone help? Is it just my lack of technique when
    blending colours? If so is there a tutorial somewhere? Or can I
    export in a different format? The screens I design are controlled
    by an xml layout file, & will accept .jpg, .gif & .bmp
    Thanks!

    Yes, as I mentioned earlier in this thread, the bit depth
    could be the
    issue. Try setting your monitor to 16 bit and experiment with
    gradients
    at that bit depth. Keep the color range and the tonal range
    less extreme
    (light blue to dark blue for example, rather than white to
    dark blue)
    similar an you might be able to get something a little more
    pleasing.
    Jim Babbage - .:CMX:. & .:ACE:.
    Extending Knowledge, Daily
    http://www.communityMX.com/
    CommunityMX - Free Resources:
    http://www.communitymx.com/free.cfm
    .:Adobe Community Expert for Fireworks:.
    news://forums.macromedia.com/macromedia.fireworks
    news://forums.macromedia.com/macromedia.dreamweaverdrblow
    wrote:
    > Thanks again for the replies y'all!
    >
    > As far as I can gather from web sources, the PPI of my
    smartphone QVGA screen
    > is 96ppi. Setting the canvas PPI does not seem to affect
    the quality of either
    > jpg, gif or bmp formats on export, once they are on my
    phone screen. It would
    > appear form web sources that the phone screen displays
    16 bit colour depth.
    >
    > I have tried to make the gradient as smooth as possible
    & on my laptop screen
    > it looks really good. Any more suggestions?
    >
    > Thanks.
    >

  • Help needed with Export Data Pump using API

    Hi All,
    Am trying to do an export data pump feature using the API.
    while the export as well as import works fine from the command line, its failing with the API.
    This is the command line program:
    expdp pxperf/dba@APPN QUERY=dev_pool_data:\"WHERE TIME_NUM > 1204884480100\" DUMPFILE=EXP_DEV.dmp tables=PXPERF.dev_pool_data
    Could you help me how should i achieve the same as above in Oracle Data Pump API
    DECLARE
    h1 NUMBER;
    h1 := dbms_datapump.open('EXPORT','TABLE',NULL,'DP_EXAMPLE10','LATEST');
    dbms_datapump.add_file(h1,'example3.dmp','DATA_PUMP_TEST',NULL,1);
    dbms_datapump.add_file(h1,'example3_dump.log','DATA_PUMP_TEST',NULL,3);
    dbms_datapump.metadata_filter(h1,'NAME_LIST','(''DEV_POOL_DATA'')');
    END;
    Also in the API i want to know how to export and import multiple tables (selective tables only) using one single criteria like "WHERE TIME_NUM > 1204884480100\"

    Yes, I have read the Oracle doc.
    I was able to proceed as below: but it gives error.
    ============================================================
    SQL> SET SERVEROUTPUT ON SIZE 1000000
    SQL> DECLARE
    2 l_dp_handle NUMBER;
    3 l_last_job_state VARCHAR2(30) := 'UNDEFINED';
    4 l_job_state VARCHAR2(30) := 'UNDEFINED';
    5 l_sts KU$_STATUS;
    6 BEGIN
    7 l_dp_handle := DBMS_DATAPUMP.open(
    8 operation => 'EXPORT',
    9 job_mode => 'TABLE',
    10 remote_link => NULL,
    11 job_name => '1835_XP_EXPORT',
    12 version => 'LATEST');
    13
    14 DBMS_DATAPUMP.add_file(
    15 handle => l_dp_handle,
    16 filename => 'x1835_XP_EXPORT.dmp',
    17 directory => 'DATA_PUMP_DIR');
    18
    19 DBMS_DATAPUMP.add_file(
    20 handle => l_dp_handle,
    21 filename => 'x1835_XP_EXPORT.log',
    22 directory => 'DATA_PUMP_DIR',
    23 filetype => DBMS_DATAPUMP.KU$_FILE_TYPE_LOG_FILE);
    24
    25 DBMS_DATAPUMP.data_filter(
    26 handle => l_dp_handle,
    27 name => 'SUBQUERY',
    28 value => '(where "XP_TIME_NUM > 1204884480100")',
    29 table_name => 'ldev_perf_data',
    30 schema_name => 'XPSLPERF'
    31 );
    32
    33 DBMS_DATAPUMP.start_job(l_dp_handle);
    34
    35 DBMS_DATAPUMP.detach(l_dp_handle);
    36 END;
    37 /
    DECLARE
    ERROR at line 1:
    ORA-39001: invalid argument value
    ORA-06512: at "SYS.DBMS_SYS_ERROR", line 79
    ORA-06512: at "SYS.DBMS_DATAPUMP", line 3043
    ORA-06512: at "SYS.DBMS_DATAPUMP", line 3688
    ORA-06512: at line 25
    ============================================================
    i have a table called LDEV_PERF_DATA and its in schema XPSLPERF.
    value => '(where "XP_TIME_NUM > 1204884480100")',above is the condition i want to filter the data.
    However, the below snippet works fine.
    ============================================================
    SET SERVEROUTPUT ON SIZE 1000000
    DECLARE
    l_dp_handle NUMBER;
    l_last_job_state VARCHAR2(30) := 'UNDEFINED';
    l_job_state VARCHAR2(30) := 'UNDEFINED';
    l_sts KU$_STATUS;
    BEGIN
    l_dp_handle := DBMS_DATAPUMP.open(
    operation => 'EXPORT',
    job_mode => 'SCHEMA',
    remote_link => NULL,
    job_name => 'ldev_may20',
    version => 'LATEST');
    DBMS_DATAPUMP.add_file(
    handle => l_dp_handle,
    filename => 'ldev_may20.dmp',
    directory => 'DATA_PUMP_DIR');
    DBMS_DATAPUMP.add_file(
    handle => l_dp_handle,
    filename => 'ldev_may20.log',
    directory => 'DATA_PUMP_DIR',
    filetype => DBMS_DATAPUMP.KU$_FILE_TYPE_LOG_FILE);
    DBMS_DATAPUMP.start_job(l_dp_handle);
    DBMS_DATAPUMP.detach(l_dp_handle);
    END;
    ============================================================
    I dont want to export all contents as the above, but want to export data based on some conditions and only on selective tables.
    Any help is highly appreciated.

  • No data set found when creating a report

    Dear all,
    This is my first time using BI Publisher, and I am stuck at a very early stage.
    I have followed the various steps described in the documentation, up to creating a new report.
    When I try to do so, I fail as there is no available data set in the left panel.
    Another curious behaviour is that I have first to export and then import sample data as xml for the sample to be saved. Otherwise, when I just click on 'Save as Sample Data', the sample file appears to be associated with the dataset, but disappears at the next logon.
    What would cause such behaviours?
    Are these issues linked?
    Is it a configuration/setup issue?
    Or could it be a privileges/roles issue?
    Cordially,
    Albain

    Vitaly,
    1.  Yes, I checked "More Data Sources" - not there.
    2.  I tried adding the Field Definitions using Control Panel Add/Remove - no help.
       I tried removing the "Field Definitions" and then adding them again - no help.
    3.  Another machine does have the same version of CR.  It is running Vista.  Problem machine is running XP.
    4.  Clicked the "Reinstall" button in the Control Panel Add/Remove - this fixed the problem.  I did not need to uninstall the program.
    Both machines now exhibit the same list of connection types (with one small exception).  Thank-you for your hellp.
    .... Warren
    Edited by: Warren Pickell on Oct 23, 2009 11:55 PM
    Edited by: Warren Pickell on Oct 23, 2009 11:56 PM
    I'm trying to indicate "Yes, my question has been answered.", but it does not seem to "take".

Maybe you are looking for

  • Only one Apple ID possible?

    Hi I had initially set up my Apple ID with a wrong email, and when it did not verify yet, I realized my error and corrected it. If there's a chance that the email I punched in exists, can they now access my iPhone? I currently have an Apple ID (with

  • MultiMedia Center for Think Offerings for Windows XP and 2000 -- will not install on Windows 7

    MultiMedia Center for Think Offerings for Windows XP and 2000 -- will not install on Windows 7  in compatibility mode or any other way. I receive error " can not open \device\memory" and then " This program can not run on his hardware. Thinkcenter E

  • Passing Data to the Purchase Order Style Sheet

    I am new to oracle so please pardon my ignorance. I was tasked with switching the Purchase Order from transmitting via a 3rd party application to using XML Publisher. I was able to get the PO to generate successfully and I have made a few minor chang

  • Switch iTunes Library from one Mac to Another

    I have an older iMac which I keep the iTunes library on an external. I just got a new MBP. How do I configure it so the iTunes library for the MBP will be the same library that I have on the external. With Lion and iCloud coming I will have to use th

  • XML-RPC Service is not available

    I'm experiencing a problem where CF 8.01 will not start. the log shows the message "The XML-RPC service is not available. This exception is usually caused by service startup failure. Check your server configuration." I traced this to a corrupted /lib