Export dump file of 8.x unable to Import in 9i

Hi,
I have Oracle 8.x version export dump file.
When i try to import this file in Oracle 9i db, it fails everytime. I have tried with all possible options in import utility. When i start import it shows as a active jobs in the jobs list but after few seconds it disappears from active tab and goes to failed list. It doesnot even gives the reason for failure. No error messages also. I don't know what shoud i do as i want to upgrade my 8.x data to 9i. I have currently only 9i installed on windows 2000 Server.
Please reply to my query as sson as possible.
Thanks

i beleive, u are using OEM or any other tool to do the export and import.
FIRST make sure, u have configured OEM properly to handle the batch jobs.
easiest way is to use the command line utilities.
use exp of lower version to export the source database.
create similiar users and tablespaces ( tablespace names is not a must) in target database.
use the same lower version of imp to import into target database.

Similar Messages

HOW TO IMPORT DATA MORE THAN ONCE FROM THE SAME EXPORT DUMP FILE?

before asking my question i'd like to mention that i'm a french spoke...
so my english is a little bit bad. sorry for that.
my problem is : IMPORT
how to import data a SECOND TIME from an export dump file within oracle?
My Export dump file was made successfully (Full Export) and then i
tried to import datas for the first time.
I got this following message in my logfile: I ADDED SOME COMMENTS
Warning: the objects were exported by L1, not by you
. importing SYSTEM's objects into SYSTEM
REM ************** CREATING TABLESPACES *****
REM *********************************************
IMP-00015: following statement failed because the object already exists:
"CREATE TABLESPACE "USER_DATA" DATAFILE 'E:\ORANT\DATABASE\USR1ORCL.ORA' SI"
"ZE 3145728 DEFAULT STORAGE (INITIAL 10240 NEXT 10240 MINEXTENTS 1 MAX"
"EXTENTS 121 PCTINCREASE 50) ONLINE PERMANENT"
IMP-00015: following statement failed because the object already exists:
"CREATE TABLESPACE "ROLLBACK_DATA" DATAFILE 'E:\ORANT\DATABASE\RBS1ORCL.ORA"
"' SIZE 10485760 DEFAULT STORAGE (INITIAL 10240 NEXT 10240 MINEXTENTS "
"1 MAXEXTENTS 121 PCTINCREASE 50) ONLINE PERMANENT"
etc........
IMP-00017: following statement failed with ORACLE error 1119:
"CREATE TABLESPACE "L1" DATAFILE 'E:\ORADATA\L1.DBF' SIZE 1048576000 "
"DEFAULT STORAGE (INITIAL 10240 NEXT 10240 MINEXTENTS 1 MAXEXTENTS 121 PCTIN"
"CREASE 50) ONLINE PERMANENT"
IMP-00003: ORACLE error 1119 encountered
ORA-01119: error in creating database file 'E:\ORADATA\L1.DBF'
ORA-09200: sfccf: error creating file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified
--->etc..........
the drive E: with the folder E:\ORADATA didn't exist, but after
all that i created it.
see below, before my IMPORT statement
REM ********************* CREATING USER *********
REM ********************************************
IMP-00017: following statement failed with ORACLE error 959:
"CREATE USER "L1" IDENTIFIED BY VALUES 'A6E0DAA6865E7627' DEFAULT TABLESPACE"
" "L1" TEMPORARY TABLESPACE "TEMPORARY_DATA""
IMP-00003: ORACLE error 959 encountered
ORA-00959: tablespace 'L1' does not exist
IMP-00017: following statement failed with ORACLE error 959:
"CREATE USER "MLCO" IDENTIFIED BY VALUES '56AC6447B7D50467' DEFAULT TABLESPA"
"CE "MLCO" TEMPORARY TABLESPACE "TEMPORARY_DATA""
IMP-00003: ORACLE error 959 encountered
ORA-00959: tablespace 'MLCO' does not exist
ETC.......
REM ********************* GRANTING ROLES ***********
REM ************************************************
IMP-00017: following statement failed with ORACLE error 1917:
"GRANT ALTER ANY TABLE to "L1" "
IMP-00003: ORACLE error 1917 encountered
ORA-01917: user or role 'L1' does not exist
ETC.........
IMP-00017: following statement failed with ORACLE error 1918:
"ALTER USER "L1" DEFAULT ROLE ALL"
IMP-00003: ORACLE error 1918 encountered
ORA-01918: user 'L1' does not exist
-- that is normal, since the creation of the
tablespace failed !!
REM******************************
IMP-00015: following statement failed because the object already exists:
"CREATE ROLLBACK SEGMENT RB_TEMP STORAGE (INITIAL 10240 NEXT 10240 MINEXTENT"
"S 2 MAXEXTENTS 121) TABLESPACE "SYSTEM""
IMP-00015: following statement failed because
. importing SCOTT's objects into SCOTT
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "EVT_PROFILE_SEQ" MINVALUE 1 MAXVALUE 999999999999999999999"
"999999 INCREMENT BY 1 START WITH 21 CACHE 20 NOORDER NOCYCLE"
ETC............
importing L1's objects into L1
IMP-00017: following statement failed with ORACLE error 1435:
"ALTER SCHEMA = "L1""
IMP-00003: ORACLE error 1435 encountered
ORA-01435: user does not exist
REM *************** IMPORTING TABLES *******************
REM ****************************************************
. importing SYSTEM's objects into SYSTEM
. . importing table "AN1999_BDAT" 243 rows imported
. . importing table "BOPD" 112 rows imported
. . importing table "BOINFO_AP" 49
ETC................
. . importing table "BO_WHF" 2 rows imported
IMP-00015: following statement failed because the object already exists:
"CREATE TABLE "DEF$_CALL" ("DEFERRED_TRAN_DB" VARCHAR2(128),
IMP-00015: following statement failed because the object already exists:
"CREATE SYNONYM "DBA_ROLES" FOR "SYS"."DBA_ROLES""
IMP-00015: following statement failed because the object already exists:
"CREATE SYNONYM "DBA_ERRORS" FOR "SYS"."DBA_ERRORS""
IMP-00008: unrecognized statement in the export file:
. importing L1's objects into L1
IMP-00017: following statement failed with ORACLE error 1435:
"ALTER SCHEMA = "L1""
IMP-00008: unrecognized statement in the export file:
J
Import terminated successfully with warnings.
-------------------------------------b]
So after analysing this log file, i created
the appropriate drives and folders... as the
import statement doesn't see them.
E:\ORADATA G:\ORDATA etc...
And i started to [b]IMPORT ONE MORE TIME. with:
$ IMP73 sys/pssw Full=Y FILE=c:\temp\FOLD_1\data_1.dmp BUFFER=64000
COMMIT=Y INDEXFILE=c:\temp\FOLD_1\BOO_idx.sql
LOG=c:\temp\FOLD_1\BOO_log.LOG DESTROY=Y IGNORE=Y;
after that i could not see the users nor the
tables created.
and the following message appeared in the log file:
Warning: the objects were exported by L1, not by you
. . skipping table "AN1999_BDAT"
. . skipping table "ANPK"
. . skipping table "BOAP"
. . skipping table "BOO_D"
ETC.....skipping all the tables
. . skipping table "THIN_PER0"
. . skipping table "UPDATE_TEMP"
Import terminated successfully without warnings.
and only 2 new tablespaces (originally 3) were
created without any data in ( i check that in
the Oracle Storage manager : the tablespaces exit
with 0.002 used space; originally 60 M for each !!)
so,
How to import data (with full import option) succefully
MORE THAN ONE TIME from an exported dump file ?
Even if we have to overwrite tablespaces , tables and users.
thank you very much

The Member Feedback forum is for suggestions and feedback for OTN Developer Services. This forum is not monitored by Oracle support or product teams and so Oracle product and technology related questions will not be answered. We recommend that you post this thread to the appropriate Database forum.
The main URL is:
http://forums.oracle.com/forums/index.jsp?cat=18

How to import external table, which exist in export dump file.

My export dump file has one external table. While i stated importing into my developement instance , I am getting the error "ORA-00911: invalid character".
The original definition of the extenal table is as given below
CREATE TABLE EXT_TABLE_EV02_PRICEMARTDATA
EGORDERNUMBER VARCHAR2(255 BYTE),
EGINVOICENUMBER VARCHAR2(255 BYTE),
EGLINEITEMNUMBER VARCHAR2(255 BYTE),
EGUID VARCHAR2(255 BYTE),
EGBRAND VARCHAR2(255 BYTE),
EGPRODUCTLINE VARCHAR2(255 BYTE),
EGPRODUCTGROUP VARCHAR2(255 BYTE),
EGPRODUCTSUBGROUP VARCHAR2(255 BYTE),
EGMARKETCLASS VARCHAR2(255 BYTE),
EGSKU VARCHAR2(255 BYTE),
EGDISCOUNTGROUP VARCHAR2(255 BYTE),
EGREGION VARCHAR2(255 BYTE),
EGAREA VARCHAR2(255 BYTE),
EGSALESREP VARCHAR2(255 BYTE),
EGDISTRIBUTORCODE VARCHAR2(255 BYTE),
EGDISTRIBUTOR VARCHAR2(255 BYTE),
EGECMTIER VARCHAR2(255 BYTE),
EGECM VARCHAR2(255 BYTE),
EGSOLATIER VARCHAR2(255 BYTE),
EGSOLA VARCHAR2(255 BYTE),
EGTRANSACTIONTYPE VARCHAR2(255 BYTE),
EGQUOTENUMBER VARCHAR2(255 BYTE),
EGACCOUNTTYPE VARCHAR2(255 BYTE),
EGFINANCIALENTITY VARCHAR2(255 BYTE),
C25 VARCHAR2(255 BYTE),
EGFINANCIALENTITYCODE VARCHAR2(255 BYTE),
C27 VARCHAR2(255 BYTE),
EGBUYINGGROUP VARCHAR2(255 BYTE),
QTY NUMBER,
EGTRXDATE DATE,
EGLISTPRICE NUMBER,
EGUOM NUMBER,
EGUNITLISTPRICE NUMBER,
EGMULTIPLIER NUMBER,
EGUNITDISCOUNT NUMBER,
EGCUSTOMERNETPRICE NUMBER,
EGFREIGHTOUTBOUNDCHARGES NUMBER,
EGMINIMUMORDERCHARGES NUMBER,
EGRESTOCKINGCHARGES NUMBER,
EGINVOICEPRICE NUMBER,
EGCOMMISSIONS NUMBER,
EGCASHDISCOUNTS NUMBER,
EGBUYINGGROUPREBATES NUMBER,
EGINCENTIVEREBATES NUMBER,
EGRETURNS NUMBER,
EGOTHERCREDITS NUMBER,
EGCOOP NUMBER,
EGPOCKETPRICE NUMBER,
EGFREIGHTCOSTS NUMBER,
EGJOURNALBILLINGCOSTS NUMBER,
EGMINIMUMORDERCOSTS NUMBER,
EGORDERENTRYCOSTS NUMBER,
EGRESTOCKINGCOSTSWAREHOUSE NUMBER,
EGRETURNSCOSTADMIN NUMBER,
EGMATERIALCOSTS NUMBER,
EGLABORCOSTS NUMBER,
EGOVERHEADCOSTS NUMBER,
EGPRICEADMINISTRATIONCOSTS NUMBER,
EGSHORTPAYMENTCOSTS NUMBER,
EGTERMCOSTS NUMBER,
EGPOCKETMARGIN NUMBER,
EGPOCKETMARGINGP NUMBER,
EGWEIGHTEDAVEMULTIPLIER NUMBER
ORGANIZATION EXTERNAL
( TYPE ORACLE_LOADER
DEFAULT DIRECTORY EV02_PRICEMARTDATA_CSV_CON
ACCESS PARAMETERS
LOCATION (EV02_PRICEMARTDATA_CSV_CON:'VPA.csv')
REJECT LIMIT UNLIMITED
NOPARALLEL
NOMONITORING;
While importing , when i seen the log file , it is failing the create the external table. Getting the error "ORA-00911: invalid character".
Can some one suggest how to import external tables
Addressing this issue will be highly appriciated.
Naveen

Hi Srinath,
When i observed the create table syntax of external table from import dump log file, it show few lines as below. I could not understand these special characters. And create table definationis failing with special character viz ORA-00911: invalid character
ACCESS PARAMETERS
LOCATION (EV02_PRICEMARTDATA_CSV_CON:'VPA.csv').
I even observed the create table DDL from TOAD. It is same as i mentioned earlier
Naveen

IMPORT a VIEW from an export dump file

I'm trying to import a view from an export dump file. In using the Import Utility, do I use the TABLE parameter and give the View name ie: TABLES=view1
null

Only I want to do is import ONE view from an export dmp file that contains hundereds of table, many views and procedures. I do not want to reimport everything from the export file.

Export dump file and log file name as sysdate in script

Hi to All,
Can anybody help me to give logical backup export dump file namd log file name is as contain sysdate in its name so that we can Uniquelly identified it.
Regards
DXB_DBA

On windows it gets a bit hairy as there really is no clean and nice way of doing it.There are a couple of options.
1. If you can rely on dateformat not changing, you can use a static substring expression. For example, the following might work w/ finnish locale echo %date:~3,2%%date:~6,2%%date:~9,4%Similarly, when you know the dateformat you can tokenize the output of 'date /t' and discard the tokens you don't want.
2. You can set dateformat to your liking and then just use %date% in your script
3. You can run a "SELECT to_char(sysdate,..." into a file and then read that file in your script.
4. Simon Sheppard also has a solution you could use as a basis. I have a slight issue with the approach, but that could just be me.
5. Use gnuwin32 or similar ;)
Also note that %date% env var is set automatically from w2k onwards, so some of the solutions might not work w/ older versions.

Export dump files.

hi all.
i am using Enterprise Linux server version 5.1.19.6 /Red Hat and Oracle database 11G R2.I want
to export dump files automatically like we are doing in windows xp with scheduled Task.
Is it Possible in Linux?plz help me out thanks in advance.

Mehwish wrote:
hi all.
i am using Enterprise Linux server version 5.1.19.6 /Red Hat and Oracle database 11G R2.I want
to export dump files automatically like we are doing in windows xp with scheduled Task.
Is it Possible in Linux?plz help me out thanks in advance.Yes,possible,you can use cron job refer
http://adminschoice.com/crontab-quick-reference
But for backup recovery operation you should be use rman(recover manager),and through enterprise manager you can schedule backup job.
http://download.oracle.com/docs/cd/E10317_01/doc/backup.102/e05407/osb_rman_backup.htm
http://download.oracle.com/docs/cd/B12037_01/server.101/b10734/rcmrecov.htm

Where is my EXPORT dump file ? How to do BRTools off line table reorgan ?

Hello,
Here was my BRTools Export output message :
About to export specified tables via Direct Path ...
Current user changed to SAPPRD
. . exporting table CDHDR 60357362 rows exported
Export terminated successfully without warnings.
BR0280I BRSPACE time stamp: 2011-08-09 16.53.04
BR1160I 1 table exported by EXP utility
BR0280I BRSPACE time stamp: 2011-08-09 16.53.04
BR0670I Enter 'c[ont]' to continue, 'b[ack]' to go back, 's[top]' to abort:
But where is my Export dump file ?
Besides, could you tell me the procedures of using BRTools Export & Import to do off-line table reorgan ?
Due to some reasons, I can't do online table reorgan.

Hi Ming,
I noted the OSS note 646681 - Reorganizing tables with BRSPACE in my previous message, already. You don't need any additional effort such as creating script, if you use brspace as I noted in my last message.
Stop the SAP system, but not database then execute the command, below;
1) brspace -u / -f tbreorg -t "CDHDR"
2) At the incoming menu steps, select --> (8 - Table reorganization mode (mode)) .. offline
3) Then continue with "c"
At the end of this steps, table and related indexes will be reorganized.
You can update statistics by using the command, below after you complete the steps, above respectfully;
brconnect -u / -c -f stats -t all -f collect -p 4
Best regards,
Orkun Gedik

Getting Datapump Export Dump file to the local machine

I apologize to everyone as this is a duplicate post.
Re: Getting Datapump Export Dump file to the local machine
My initial thread(started yesterday)was in 'Database General' and didn't get much response today. Where do i post questions on EXPORT/IMPORT utilities?
Anyway, here is my problem:
I want to take the export dump of itemrep schema in orcl database (in a remote machine). I have an Oracle server (10G Rel2) running in my local Windows machine. I have created a user john with necessary EXPORT/IMPORT privileges in my local db. Then i created a Directory object,ie a folder named datapump in my local hard drive and granted READ WRITE privileges to john.
So john, who is a user in my local machine's oracle db is going to run the expdp utility.
expdp john/jhendrix@my_local_db_alias SCHEMAS=itemrep directory=datapump logfile=itemrepexp.log
The above command will fail because it will look for itemrep schema inside my local db, not the remote db where the itemprep is actually located. And you can't qualify the schemaname with its db in the SCHEMAS parameter (like SCHEMAS=itemrep@orcl).
Can anyone provide me a solution for this?

I think you can initiate the datapump exp utility from your client machine to export a schema in a remote database.But, Upon execution,oracle looks for the directory in the remote database and not on your local machine.
You're inovoking expdp from a client (local DB) to export data from a remote DB.
So, With this method, you can create the dumpfiles only on the Remote server and not on the local Machine.
You can perform a direct import instead of export using the NETWORK_LINK option.
Create a DBlink from your local and Remote DB and verify the connection.
Then,Initiate the Impdp from Your local machine DB using the parameter network_link=<db_link of the Remote DB> to import the schema.
The advantage of this option eliminates the Dumpfile creation at the Server side.
There are no dumpfiles during the import process. the Data is imported directly to the target schema.

User & Schema name of Export dump file

I have an exported dump file. I dont have any log file of that export. I want to Import it in another system. How do I know concerned user or schema name of that dump file.
Is there any way to know it???

dbanirav wrote:
I have an exported dump file. I dont have any log file of that export. I want to Import it in another system. How do I know concerned user or schema name of that dump file.
Is there any way to know it???made with exp or expdp?
what OS name & version?
How do I ask a question on the forums?
SQL and PL/SQL FAQ

Database Restore Using Export Dump File

I have searched a lot of books and web sites, but cannot find the exact procedure as to how to restore full oracle database using the export dump file and the import utility.
Does anyone have any ideas.
Paltform: W2K AD Svr, Oracle 9.2.0.6.
Please advice

Hi, I was able to create the db using dbca, and then import.
When I first imported, I got messages all over that user or objects did not exist. So I commented the line which would invoke the CreateDBCatalog.sql script.
And now I get this,
C:\>imp '/ as sysdba' file=z:\export\tuethusat\dbname_full_export.dmp full=y
Import: Release 9.2.0.1.0 - Production on Tue Oct 24 15:30:03 2006
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
IMP-00003: ORACLE error 942 encountered
ORA-00942: table or view does not exist
IMP-00023: Import views not installed, please notify your DBA
IMP-00000: Import terminated unsuccessfully
C:\>
Any suggestions?

How-to Generate Script from the export dump file

Hi all,
Software : Oracle 10gR2/Windows 2003
=============================
Has anyone generated a Script from a export dump file ( exported via data pump export). I know it is possible to generate script from the regular export.
I want to know how to generate the script for various objects or is it possible to get the counts of types of objects in the dump file and / or generate the script from the export dump file exported via data pump utility on Oracle 10g.
Thanks,
SS

I want to know how to generate the script for various objects.what do you mean by scripts? Assuming the metadata definitions of various objects.
First of all, you can generate the metadata definitions using import.
Use, Impdp with SQLFILE parameter to generate the SQL file for the metadata definitions.
Refer to
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14215/dp_overview.htm

Re-Occurring Blue Screen~Dump files included~Please Help~Unable to verify timestamp for ntkrnlpa.exe

Hello,
Starting yesterday I started getting the BSOD. I have uploaded my dump files to this dropbox account:
www.dropbox.com/sh/w3ryago8pfcw2y2/AAAR5i6Crx5q-p--xdESJjnMa
There are lots of them as my PC crashed many times.
I attempted to analyze them with windbg but all I can see is:
Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
Also I ran sfc /scannow and it found no integrity violations.
After the first BSOD I was barely able to get Windows to load without another immediate crash. I couldn't boot my PC last night but today seems okay so far. CPU temp was fine, actually quite cool as I had my window open right by the PC with the side off
the case and it was cold last night. Today, so far, seems to be running okay...so far anyways..
Windows update recently installed a driver for my on-board video card (Nvidia GeForce 6150n) on the 18th I think as I started using a 2nd monitor using the on-board card in addition to my PCI Express Ati Radeon HD. To use the second screen, I switched
the primary video in CMOS to on-board instead of PCI-E 16x so the on-board Nvidia card would be enabled.
I also installed brand new ram (4gb DDR2) about a month ago
and a new power supply 2 months ago. The power supply is not "exactly" the same voltage as the one that was in there but it's dang close. But I don't have any power leeching components.
Other than that nothing new has happened. After I got the crash, I tried to enter CMOS yesterday and it glitched out on me twice. I hope it's not my motherboard..
I am willing to do a system re-format as I am running Windows 7 32bit on a 64bit AMD so I wouldn't mind having 64 bit Windows anyways but I'd like to know what the problem is before I do this. Thank you.
Update: Just did a MalwareByte's Anti-Malware scan and no malware but found these items:
Scan Date: 5/22/2014
Scan Time: 6:08:00 PM
Logfile:
OS: Windows 7 Service Pack 1
CPU: x86
File System: NTFS
Scan Type: Threat Scan
Result: Completed
Objects Scanned: 261539
Time Elapsed: 8 min, 10 sec
Processes: 0
(No malicious items detected)
Modules: 0
(No malicious items detected)
Registry Keys: 0
(No malicious items detected)
Registry Values: 0
(No malicious items detected)
Registry Data: 0
(No malicious items detected)
Folders: 2
PUP.Optional.CrossRider.A, C:\Users\Justin\AppData\Local\Google\Chrome\User Data\Default\Extensions\ecoccdldklbjglocbgbfpmpehjegkode, , [dd97c58f413a74c2503e7106649ec23e],
PUP.Optional.CrossRider.A, C:\Users\Justin\AppData\Local\Google\Chrome\User Data\Default\Extensions\ecoccdldklbjglocbgbfpmpehjegkode\0.1_0, , [dd97c58f413a74c2503e7106649ec23e],
Files: 9
PUP.Optional.OptimumInstaller.A, C:\Users\Justin\Downloads\Player-Chrome.exe, , [6b090a4a4437d363a05f361717ea718f],
PUP.Optional.Outbrowse, C:\Users\Justin\Downloads\install-flashplayer.exe, , [561ee173fe7d1125edf4d9a443be5aa6],
PUP.Optional.CrossRider.A, C:\Users\Justin\AppData\Local\Google\Chrome\User Data\Default\Extensions\ecoccdldklbjglocbgbfpmpehjegkode\0.1_0\icon-128.png, , [dd97c58f413a74c2503e7106649ec23e],
PUP.Optional.CrossRider.A, C:\Users\Justin\AppData\Local\Google\Chrome\User Data\Default\Extensions\ecoccdldklbjglocbgbfpmpehjegkode\0.1_0\icon-16.png, , [dd97c58f413a74c2503e7106649ec23e],
PUP.Optional.CrossRider.A, C:\Users\Justin\AppData\Local\Google\Chrome\User Data\Default\Extensions\ecoccdldklbjglocbgbfpmpehjegkode\0.1_0\icon-48.png, , [dd97c58f413a74c2503e7106649ec23e],
PUP.Optional.CrossRider.A, C:\Users\Justin\AppData\Local\Google\Chrome\User Data\Default\Extensions\ecoccdldklbjglocbgbfpmpehjegkode\0.1_0\jquery-1.10.2.min.js, , [dd97c58f413a74c2503e7106649ec23e],
PUP.Optional.CrossRider.A, C:\Users\Justin\AppData\Local\Google\Chrome\User Data\Default\Extensions\ecoccdldklbjglocbgbfpmpehjegkode\0.1_0\manifest.json, , [dd97c58f413a74c2503e7106649ec23e],
PUP.Optional.CrossRider.A, C:\Users\Justin\AppData\Local\Google\Chrome\User Data\Default\Extensions\ecoccdldklbjglocbgbfpmpehjegkode\0.1_0\tweetwiki.js, , [dd97c58f413a74c2503e7106649ec23e],
PUP.Optional.CrossRider.A, C:\Users\Justin\AppData\Local\Google\Chrome\User Data\Default\Extensions\ecoccdldklbjglocbgbfpmpehjegkode\0.1_0\_DS_Store, , [dd97c58f413a74c2503e7106649ec23e],
Physical Sectors: 0
(No malicious items detected)

Hi,
All of the attached DMP files are of the
WHEA_UNCORRECTABLE_ERROR (124) bug check.
A fatal hardware error has occurred. This fatal error displays data from the Windows Hardware Error Architecture (WHEA).
If we run an !errrec on the 2nd parameter of the bug check (address of the WER structure) we get the following:
BugCheck 124, {0, 867d2024, b2000010, 10c0f}
===============================================================================
Section 2 : x86/x64 MCA
Descriptor @ 867d2134
Section @ 867d22bc
Offset : 664
Length : 264
Flags : 0x00000000
Severity : Fatal
Error : BUSLG_OBS_ERR_*_NOTIMEOUT_ERR (Proc 0 Bank 4)
Status : 0xb200001000010c0f
This is a pretty complicated error compared to other possibilities it could have been, as it implies you have a hardware fault somewhere along the bus (not very definitive on its own).
In our case however, we can go a bit deeper with this one:
0: kd> .formats 0xb200001000010c0f
Evaluate expression:
Hex: b2000010`00010c0f
Decimal: -5620492266238833649
Octal: 1310000001000000206017
Binary: 10110010 00000000 00000000 00010000 00000000 00000001 00001100 00001111
Chars: ........
Time: ***** Invalid FILETIME
Float: low 9.61613e-041 high -7.45059e-009
Double: -7.41853e-068
Now that we have this info, we'd refer to the AMD manual:
63 VAL Valid
62 OVER Status Register Overflow
61 UC Uncorrected Error
60 EN Error Condition Enabled
59 MISCV Miscellaneous-Error Register Valid
58 ADDRV Error-Address Register Valid
57 PCC Processor-Context Corrupt
56–32 Other Information
31–16 Model-Specific Error Code
15–0 MCA Error Code
In our specific case, bit 63 of the status code is set, so it is valid. Bit 62 of the status code is
unset, therefore there's no overflow. Bit 61 implies an uncorrected error has occurred, and Bit 60 implies an error condition was enabled. Last but not least, Bit 57 is
set and implies a corrupted processor context.
If we take a look at the last 15 bits of the binary:
Binary: [trimming] 00001100 00001111
In our case, the MSB in binary (00001100 ), implies a bus error occurred (as I mentioned above). We need to further decode the bits to understand more:
[0000]1100 00001111
0000 = 1PPT RRRR IILL.
PP = Participation Processor, T = Timeout,
R = Memory Transaction Type, I = Memory and/or I/O, and finally
L = Cache Level.
With this said, it appears we actually have a faulty motherboard as the processor seems fine, etc. The only other thing I see possible is bad RAM, which you can figure out whether or not is the case by running no less than ~8 passes of Memtest:
Memtest86+:
Download Memtest86+ here:
http://www.memtest.org/
Which should I download?
You can either download the pre-compiled ISO that you would burn to a CD and then boot from the CD, or you can download the auto-installer for the USB key. What this will do is format your USB drive, make it a bootable device, and then install the necessary
files. Both do the same job, it's just up to you which you choose, or which you have available (whether it's CD or USB).
Do note that some older generation motherboards do not support USB-based booting, therefore your only option is CD (or Floppy if you really wanted to).
How Memtest works:
Memtest86 writes a series of test patterns to most memory addresses, reads back the data written, and compares it for errors.
The default pass does 9 different tests, varying in access patterns and test data. A tenth test, bit fade, is selectable from the menu. It writes all memory with zeroes, then sleeps for 90 minutes before checking to see if bits have changed (perhaps because
of refresh problems). This is repeated with all ones for a total time of 3 hours per pass.
Many chipsets can report RAM speeds and timings via SPD (Serial Presence Detect) or EPP (Enhanced Performance Profiles), and some even support changing the expected memory speed. If the expected memory speed is overclocked, Memtest86 can test that memory performance
is error-free with these faster settings.
Some hardware is able to report the "PAT status" (PAT: enabled or PAT: disabled). This is a reference to Intel Performance acceleration technology; there may be BIOS settings which affect this aspect of memory timing.
This information, if available to the program, can be displayed via a menu option.
Any other questions, they can most likely be answered by reading this great guide here:
http://forum.canardpc.com/threads/28864-FAQ-please-read-before-posting
Regards,
Patrick
“Be kind whenever possible. It is always possible.” - Dalai Lama

Can we create export dump files on client side??

Hi,
Please see this link
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14215/dp_overview.htm#i1010293
Check the "NOTE" which says that
All Data Pump Export and Import processing, including the reading and writing of dump files, is done on the system (server) selected by the specified database connect string. This means that, for nonprivileged users, the database administrator (DBA) must create directory objects for the Data Pump files that are read and written on that server file system. For privileged users, a default directory object is available
So does this mean, the dump files can be created only on the server???
What if i want to create the dump file on my client c:\
Is it possible??
As per my knowledge, this was possible in 9i
Thanks

Yes in the "orignal" export ,it was possible to have a client side dump file.But the Export DataPump uses the Directory parameter which maps to a directory on the server side only and the option to give an absolute path for the dump file on the client side is removed,the files can be only on server side.
Aman....

Export Dump File without defined VPD policies

Hi there,
Can some one help me on this problem ?
I've some tables with vpd policies defined on them. When I export these tables the dump file puts some instructions related to these policies such as:
EXECUTE DBMS_RLS.ADD_GROUPED_POLICY(sys_context('userenv','current_schema'),'"TABLE1"','SYS_DEFAULT','POLICY1','MD','ACESS1','SELECT,UPDATE,DELETE',FALSE,TRUE,TRUE);
Then when I try to import those tables, I'm getting some problems with that if I don't have those policies/functions created (which is the case).
So,
how can I export tables without those instructions ?
Or
how can I prevent the execution of those lines during import task ?
Thanks in advance,
Helena

In both (export and import) cases the policy could also be disabled for the duration export and import.

Size of export dump file

I read an article on EXPORT of dump file cannot over the limit of 2Gig. This is because prior to 8.1.3 there is no large file support for Oracle Import, Export, or SQL*Loader utilties.
How bout the current version? 9i or 10g? Can the exp dump file be larger than 2G?

Under AIX Unix, there is a fsize parameter for every user in /etc/security/limits file. if fsize = -1 then user will have authority to create any file size. But to do this change, you should have root access under Unix enviroment.

Export dump file of 8.x unable to Import in 9i

Similar Messages

Maybe you are looking for