Export for DVD using toast

I am using Final Cut 6. I have 6 projects that I want to put on continual loop. They were all the same settings when imported to final cut and exported exactly the same. Only four out the 6 would work in Toast although could play them out of toast.
I then used Imovie to export the other two. They are all at 1920 x 1440 but when put into toast it is changing the 4 to 1440 x 1080. Any ideaS?

I suppose you are working with HDV?
It is 1920x1080 anamorphic(1440x1080).
So Toast just shows native dimension.
If Toast shows 16:9 aspect movie on preview, that's fine.
At least my Toast 10 is recognizing movie correctly.

Similar Messages

Exporting for DVD without using iDVD

Hi
I've downloaded 5 x mini DV tapes (from a client) onto iMovie because I was having major audio syncing problems using Final Cut Pro.
Using iMovie proved the perfect solution.
What I'm not sure about now is how to export the file, so that I can burn it onto DVD using Toast and so that it self loads when put in the DVD player.
In FCP I export 'Quicktime Movie' and take off the 'Make movie self contained' option. The file I get is then great to put into Toast as a video then DVD-Video, which when played in a DVD player self loads.
This system is great because it avoids having to go through the DVD authoring phase and for these small client jobs it is really necessary to cut down time.

Don't try 'drag and dropping' the iMovie project file (the icon with a star) - that file won't work.
I don't like to contradict you, Fred, but since Toast 6.1.1, FOR SURE, the project-file with the star-icon does work with Toast.. that updated version "catches" the ref.mov from inside automatically.... no need to export anything manually...
but, as you have mentioned before:
select in Toast "video", select "dvd", THEN drop project into Toast...
PS: yepp, I couldn't deny myself, to post a pic here ... ;-)))

FCP 7 exporting for DVD, Image problems

Hey,
New here so sorry if I'm a little slow with everything. We shot some concert footage using 4 cameras, 3 cameras shot in 1440X1080 HDV 1080i60 and the other camera shot in AVCHD but was imported as 1440X1080 ProRes 422. I edited the video in a sequence with settings of 1440X1080, field dominance of Upper (odd), and compressor HDV 1080i60. I was trying to find a way to export for SD DVD in the best quality I could and found Ken Stone's site,
http://www.kenstone.net/fcp_homepage/hdv_timeline_to_sd_dvd.html
It's worked for me on other projects. This project is a 2 1/2 hour DVD, so I tested that method on a minute of the footage and it didn't come out well just for one camera. I followed Ken Stone's page and took the sequence and changed the settings to field dominance None, and compressor to ProRes 422. Then I exported using quicktime conversion with settings of ProRes 422 HQ. Once that file is exported I've been taking it to Compressor and using either DVD Best 90 Minutes or 120 Minutes. On the max bitrate I don't go above 7.9 and on the average I'm usually around 6.7 for Best 90 minutes and 5.2 for Best 120 minutes. Whenever I put the footage in DVD Studio Pro, the footage from the 3 cameras shot in 1080i60 look great but the footage originally shot in AVCHD has all sorts of lines and distortion on movement. I'm just trying to find out if there is a better way for me to take my footage from final cut to SD DVD and still get good looking footage out of the original AVCHD footage. I don't really understand why the footage from the AVCDD footage is coming out like that since it was imported as ProRes 422. Any ideas on how to fix this?
Thanks,
Matt

Thanks a lot, this did the trick.
Yeah I'm doing a dual layer dvd, but I'm sending it off for replication so from what I've read it sounds like I have to build and format the dvd, then burn each Layer to it's own dvd. Do you have any experience with this? The break point is kind of confusing me right now because it sounds like just a lot of trial and error.
Thanks again
Matt

Emergency questions exporting for dvd studio pro (ntsc and pal)

Hi,
I'm under a tight timeline and would appreciate any help possible. I'm experimenting with outputs/burning today so the real thing can happen tomorrow.
I have an hour long project that was shot on two different kinds of cams -- a sony hdv V1U and pan dvx100b. The first shot mostly in 16:9, the second squeeze 24p. We imported all footage as non-hd though, because the V1u has had problems syncing properly with hd settings with final cut. The issue/question now is this-
I don't know what file format (I'm assuming mpeg-4 for DVD studio pro, but using compressor or no?) or settings to use -- I'm used to mpeg-4, but for some reason it is coming out all grainy/pixelated and I'm not sure if I need to adjust the settings. Also, once exported into a usable/high quality format, I need to burn a ntsc dvd but also a pal dvd -- I've burned pal dvds on dvd studio pro before and know adjusting the settings is just in preferences, but I'm assuming the video will need to be converted into a different kind of file. Or no?
My sequence settings are 1440x1080 (16:9), quicktime video settings compressor hdv 1080i60. When I export as a quicktime file the conversion is great and no problems, but that isn't workable in dvd studio pro.
I would appreciate any advice you could offer,
Thank you,
Tenzin

Thank you, I'm trying that -- someone else just mentioned it needing to be an mpeg 2 file as well. The trouble I'm having now in compressor is it isn't converting when I press submit -- nothing is showing up in the batch monitor. I've tried this directly exporting from fcp using compressor, as well exporting quicktime from fcp and then using the quicktime file in compressor.
I'm not used to using compressor so I'm thinking I am not doing something properly in this process? Thank you for the suggestions, they are reassuring. Do you know if the same file produced by compressor can be used for the pal dvd?

Exporting for DVD

Hi,
Ridiculous question I know but here goes.
I have a 2 1/2 hour show that I videoed on MiniDV and have edited in Final Cut. The image quality is as good as I want it, not perfect but fine, but when I export to use in DVD Studio I loose quality. I'v used Compressor and converted it to MPEG-2, but is there any way I can just export straight from Final Cut Pro without loosing image quality, keeping all the settings and so on I used in Final Cut Pro?
Im burning on to Dual Layer DVDs so space isn't really an issue.
Does it have to be MPEG-2? Is there a different, higher quality format I can use? Or is the only thing I can do to try keep the quality raising the bitrate?
Anyone with an insight to share with me can treat me like a luddite and use baby speak
Cheers

Heya,
All DVD's are authored to MPEG-2 format. You must compress the file to MPEG-2 in order to play on a standard DVD player. SD MiniDV is roughly 13gigs per hour. So for 2 1/2 hours of footage you're looking at around 30 gigs that needs to be compressed to fit onto a DVD.
You should also take into consideration the bitrate of MPEG-2 compression. Considering that the audio is compressed to AC3 a safe bitrate compression for DVD video is around 7.5 mbp/s. A bitrate higher than that may cause errors during playback on some DVD players.
single layer vs. dual layer makes no difference on the total bitrate compression it only means you can fit longer duration of the compressed bitrate. Sending to Compressor and using a customized setting of MPEG-2 compression with 7.5 bitrate for video and AC3 for audio is the best quality you'll get on a standard DVD.
Welcome to the forum.

Best way to export for DVD

Hi Guys
Right, I am exporting to DVD and i want to know the best way to do this at the highest quality, but also, so the DVD will play on most players.
I am shooting in HDV 1080i 60, importing to Final Cut Pro 5.1.4 (the older final cut pro) using the apple intermediate codec.
I want to make the best quality SD dvd. The content is rarely over 5 minute's (kids music videos) but i am preparing a 50 minute show which needs to be put on DVD.
I usually use; export to quicktime movie, with the setting dv pal 48 khz anamorphic, i use DVD studio pro also to make the DVD, but not sure what the best settings are.
PLEASE HELP.

The BEST export method I have found by comparing them all is by exporting using Compressor and the DVD Best Quality setting. Now this setting gives you a few different options for length of your project: 120 minutes, 150 minutes, or 90 minutes. And then with each of these length options comes the option of 4:3 or 16:9. So if your project is 50 minutes, select the DVD: Best Quality 90 minutes option, either 4:3 or 16:9 depending what your project is. After laying your cursor over this option it will open up a list of audio options. What I do is just select the "All" option, which then lists all 3 audio options in your batch window: AIFF, Dolby 2.0, and MPEG-2. What I then do is just delete the MPEG and Dolby options, leaving the AIFF. After waiting for it to compress (make sure you specify a destination for the files so you can find them) it will give you 2 files, an MPEG-2 file which is the movie file, and an AIFF file (looks like an itunes file) that is the audio file. At this point, open up DVD Studio Pro and drag these 2 files into the assets window, and you're good to go from there. Hope this helped.
-JP

Exporting for Web VS exporting for DVD

So here's the story:
I am pretty familiar with exporting my movies for the web and stuff like compression, etc but I was just asked to burn some of my movies for DVD distribution. As stupid as I am, I sent those guys the files that I use for web distribution and of course I get a reply that goes something like this: "This isn't DVD quality. We need the full movie file, highest quality/bit rate, frame rate, de-interlaced versions of the movie."
Can someone help me understand what that means??
If I were to export the movie uncompressed I might as well give up right now. It's all HD. I won't be able to fit even one of my movie files on the biggest hard drive.
Does anyone know what "the highest quality/bit rate, frame rate" etc. means? I feel like a retard right now.
Thanks for your help!

Assuming you are using Final Cut Express, your best bet is to create a master DVD and have a good service provider duplicate the disk.
In FCE, do the following:
Make sure everything is rendered:
*Sequence > Render All > Both*
*Sequence > Render Only > Mixdown*
Then save your project.
Export to QuickTime Movie (not QuickTime Conversion)
UNcheck the option called "Make Movie Self-Contained"
Check the option to Include chapter markers (if you have chapter markers in your sequence)
Save
Then import the resulting QT reference movie into iDVD and build your DVD project. Burn the finished project to disk and give it to the duplicators.
If that's not acceptable to them then you should
1) find another duplication house that will do the work or
2) get the exact specifications from them as to what they require; if this is the case you will probably need to get an external hard drive that you can use to save the project for them.
What is the exact nature of your source video? HDV? AVCHD? Something else? Do you have mixed formats in your sequence?

Help Exporting for DVD Output

What is the best way to export my 1920x1080 16:9 timeline for DVD output.
I have tried numerous attempts but the quality on DVD leaves something to be desired.
It looks great when i export it using QT but I also need to have it on a DVD.
Clearly, I am doing something wrong. What settings should i be using?
Sequence Settings
Frame Size: 1920x1080
Field dominance - none
Frames: 30fps
Compressor: ProRes422

First thing you've got to understand is that a DVD is standard definition. It will never be HD quality. That you will lose by encoding to mpeg2.
I'd do the compression in compressor-- try the standard compressions for your length, if those are NG, try duplicating a preset and upping the bitrate. Also, 2 pass vbr with increase the quality, at the expense of compressing time.
This is almost as dark an art as web encoding. Not difficult to do, just time consuming and tedious until you find the correct recipe.
EDIT: I should add that only you and your client can decide what is "good enough."
Message was edited by: Jim Cookman

Exporting for DVD requires extremely low volumes, is that normal?

Hi,
I have completed a project and when exporting to dvd I find I need to lower the master volume by 18 db for it to not cause tv speakers to pop, I try it out on several different tv's with the same result.
When I mix my audio none of it exceeds 0 db, nothing is in the red and nonetheless I lowered by 6 db, but it won't be enough until I export at -18 Db.
I do this by lowerng the master audio level from 0 to -18.
Is this normal?

Hunt, thanks for the reply!
I do the same, well I use beyer dynamic dt 770 pro headphones for monitoring, then I test the audio out on a stereo and a 5.1 surround setup.
If I export the audio on a cd it sounds great everywhere, put it on dvd and it goes to hell.
Is it possible that audio cd's are at 44100 16 bit wheras dvd audio is 48000 khz?
Doesn't make much sense to me, but the way I see it the irony is this:
Play and audio cd where the audio peaks at 0db through your tv and it sounds great, play a dvd with the same audio on it and it kills the speakers :S
Is it possible that mpeg2 encoding boosts audio levels for some reason and you need to correct it by pushing audio levels down?
I found this link after doing some research:
http://dvcreators.net/discuss/showthread.php?t=25404
Basically this question was asked:
1. *is there a certain db level an audio track should be if you plan to burn to DVD?
amongst others,
The reply was:
Use the audio meters to gauge audio level. Peaks should be at -16 to -12.
Why is this do you think?
-2 db would not work when I burn to dvd, it would kill the speakers of either a surround system or a stereo tv system, including my samung hdtv.
When I export to dvd I first export from premiere the built in Mpeg-2 DVD setting and then use either windows dvd maker or idvd on my mac to burn to dvd.

Exporting for DVD SP?

Ive finished editing my video in FC and have exported using both Quicktime and QT conversion - when I open DVD Studio Pro and try to import the asset - it gives me an error saying the file is not compatible. What file format do I need to export to to create a simple DVD of one video created in FC?

Hi
Export your sequence to *Quciktime Movie* (nos QT Conversion) including DVDSP markers (self contained is my favorite flavor).
OPTION A
Drop that file in DVDSP and let it make the encoding (less control over encoding settings plus uncompressed audio)
OPTION B
Use Compressor with the corresponding Best Quality preset for DVD depending your movie lenght in minutes to get: MPEG2 video and AC3 audio. Import thoses as assets in DVDSP.
Check that your DVDSP project match your movie format: PAL/NTSC and SD/HD DVD.
Hope that helps !
Alberto

Exporting for DVDSP2 using FCPHD4.5?

Hi,
What's the "best" method for exporting from FCPHD 4.5 use in DVDSP2? I've searched the forums and I've a seen a few different answers (a lot of which were suggestions for FCP5 / DVDSP4).
I have a 99 minute movie that I'm exporting at "current settings" from FCP. I end up with a 21GB file that works fine in iDVD5 - but will not fit onto a standard DVD-R using DVDSP2 (comes out to 8.7 GB in DVDSP's meter). iDVD also produces a final print that we're quite happy with.
I'm planning to upgrade to FC Studio before the end of the year - but until then - any suggestions, techniques, tips would be greatly appreciated. Or, simply tell me where I'm going wrong.
Thanks gang-

Craig,
While I'm no expert I can tell you what I have experienced. I prefer, and have been suggested to, export from FCPHD using Compressor. Of course I always go with high quality output. I just used this method with a 98 minute movie late last week and used the 90 minute HQ compression default in Compressor and the accompanying audio compression. After about 20 hours of compression I ended up with a movie that was 3.42GB and audio that was 1.05GB. However, when I put them in the DVDSP Project the resulting track containing them is 4.9 GB, still too long (my total project comes out to 5.1GB). My suggestion is to use Compressor, but not to use the 90 minute HQ setting. I'm not sure the best way from there I would say that you should use the bit rate calculator at this site: http://www.wiredinc.com/bitrate.html and customize your settings, or if you're not comfortable with that use either the 90 minute fast encode, or 120 HQ encode, but I do not know if the results will be good enough for yoru liking.
Hope that helps at least a little. I don't want to to waste 20 hours like I did! good luck!

Exporting for Dvd Studio Pro

im trying to export students projects in my lab, what steps do i need to do to get them to work efficiently in Dvd Studio Pro. they are all on there own external harddrives.

I think we need a bit more detail.
Are you exporting footage from FCP?
If so, you should look to encode it to MPEG2 before bringing it in to DVDSP if you want to have control over the encoding process. You could use Compressor, or you could use any other encoder that you wish, as long as it produces elementary streams for DVDSP.
You could export from FCP using the Quicktime conversion OR the Compressor option.
You might choose to do neither and simply use the .mov file in DVDSP and let DVDSP handle the encoding as you work (in the background) or when you build.
Some more info would help

Export For DVD Studio Pro

What's the best export setting for an iMovie that I will be including on a DVD-SP project. I posted a similar question in the DVD-SP forum and was told to use MPEG-2 as my export setting under the "Expert Settings" tab. However, I didn't see this as an option. What's the best setting to use for a DVD project. I was under the impression that MPEG-2 is the standard for DVD but don't know what to do to get that quality from iMovie.

Well what -I- would do is a FULL Quality DV export from iMovie then use Compressor to encode to MPEG-2. Compressor gives you a lot more options and (arguably) better quality.
Daniel C. Slagle
Keeper of the "Unofficial" iMovie FAQ
http://iMovie.danslagle.com

Export for Web using optimized for "download" or "streaming"?

Hi,
Exporting for Web have some setting there,i'll choosing the .mov - H264 - and medium low quality - 15 Frame Rate - Checked Frame Reordering, others Automatic and the Audio will be 32.000hz and Mono.
Now,what about the optimizing? Download or Streaming?
What about Self-Contained Movie? do i need it?

optimizing for download or streaming depends on what sort of site you're sharing it on. Will it be streamed or a download file?
It must be self-contained, unless you are going to be streaming it, and hosting it from the machine that the original media is on. Even then I'm not sure that would work reliably.

Exporting Flash for DVD use

We are working on a Flash file that will be used on the web and also on a DVD. We have the flash file set up to 720 x 540. We have not used the Title safe and Action safe template area, and we have type and titles close to the edge in our flash file. How will we be able to export out the flash file to work on a DVD and still be visible on a TV since we have not used the title safe/action safe template? Can we just output at a smaller size? Please let me know what our options are so we can figure out where to go from here. We will be exporting the file out of Flash and bringing it into Final Cut Pro and then exporting it out through Compressor to burn with DVD Studio Pro. Any help will be greatly appreciated.
Thanks,
kevinLVAI

You can convert SWF to some movie format like AVI. You have tons of tools available for it.
I am currently working with Croatian television creating some animations.
I use AdShareit:
http://www.adshareit.com/swf-to-video.html
You can choose anything you like.
Hope it helps.
Regards,
Vjeko

Export for DVD using toast

Similar Messages

Maybe you are looking for