Export for quick time running under windows?

I am coming to Final cut X pro from Imovie. Under Imovie I could export a movie that would run under quicktime for both Mac and Windows computers. Now using Final cut X pro, when I export for quicktime, my movie works fine using a Mac computer but fails under windows. When I attempt to open the movie quicktime tells me I have a problem with the codec. It indicates that I need an add on, but does not indicate which one is needed. Share works great for output to my Ipad. What I like to do is export to quicktime and use a windows computer to output to a wide screen tv. I down loaded the latest version of quicktime for windows. Under the share option what codec option should I chose, or do I require an add in to Quicktime? Thanks.

Not that you should have to, but try to make your final export from Compressor to see if that works better. Perhaps this can help you isolate the problem. H.264 should work in Windows, so you could also check your export on a different PC to see if the problem is on the receiving end.
I'll put in my vote here for Flip-for-mac getting their components to play nice with FCX. I have always found it a handy tool.

Similar Messages

Is there a fix for iTunes not running under Windows 8.1 Operating System?

I used iTunes for Windows, on my Dell Tower PC, successfully under Windows 7 to import CD tracks and share them with my iPad and iPhone using iTunes Match but since I upgraded my operating system to Windows 8 and then 8.1, iTunes for Windows will not run, despite my downloading the latest versions as they become available; I receive no error message!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
You could also try working through
TS1717: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
tt2

My project is finish with final cut 4 when i export on quick time a window open and says (error 34 ) is anyone knows what is the problem tanks DENIS

my project is finish with final cut 4 when i export via quick time a window open and says (error 34 ) what is the problem .
i've made many transfers before and every time it was excellent thanks denis

Is the external formatted tmac OS Extended?
It should be.
Al

Quick Time Pro in Windows 7

I have quick time pro 7 but use it in Windows not Mac. I can't find a way to play a .wma file in quick time pro. All I can see online is codec software to allow wma files to play in quick time if you have a mac. This doesn't help if you are trying to use quick time pro with windows.
I have a movie I created in windows live movie maker and want to play it in quick time pro or more specifically import it so I can export it to a m4v file to upload the video on my iphone 4s. The video orginated from my iphone 4 as mov but I found it much easier to edit in movie maker over quick time pro but now can't save the file as mpeg4 or m4v in movie maker so I need to be able to open the save wma in quicktime pro.

The Windows version of QuickTime Player can't open Windows Media Player formats.
The only reason the Mac version uses QuickTime for WMP files is because of additional third party software.

I've problems exporting in quick time : green line and got a video that doesn't go smooth

every time i try to do export with quick time i got problems :
green line
video that that stops every now and then
is it a problem of the machine or of the video
for last i tried to share media and i got a video that go smothly but when i burned the dvd i got bucgs again

i read around that quick time has some problems with two graphic cards but not final cut x
yes i've got two graphic cards but i can't manage to remove one of them.
infact i'vea mac pro1.1 and i had to buy a new graphic card ( one that i fonundcompatible with final cut and my mac )
to makefinal cut pro x run. the problem is that the computer recognize andinstall the driver card only if i leave the oringinal one as well.
if i try toturn on the computer only with the new card there is no signal to thevideo.
hope youcan give any help

Is CS5.5 ok to run under window 8?

Dear Sir / Madam
I will buy new computer with OS window 8 Pro (64bit).
So my existing CS5.5 is running under window XP in my old computer
Could you please advise about questions as below:
1. How to transfer CS5.5 to new computer with OS window 8 Pro (64bit)?
2. How to solve this error from running Adobe Illustrator CS5.1?
I am looking forward to your reply
Andrew

If you do not own discs for CS5.5, you can download CS5.5 trials versions to your new computer from the web site page linked below and then use your current serial number to activate it. You need to follow the Very Important Instructions to do that properly
http://prodesigntools.com/adobe-cs5-5-direct-download-links.html
You are allowed to maintain two machines with activated installations of Adobe software as long as they are not both using the same software at the same time. If you prefer to remove the software from the older machine you should deactivate it first (under the Help options) before uninstalling.

HT3775 how can i download the audio codec for quick time to hear the sound

hi, everyone i just jumped to mac from windows so i have couple of problems to sort out first and formost i like to ask that how and where can i download the audio codec for quick time player to hear the sound of the movie because whenever i download something as me for an audio codec after that if i wanted to uninstall anything where should i go to do that and finally just couple of days back i just bought new macbook pro so whenever i made i purchase to app store or itunes ask me for security questions as i am making first time purchase on this new make and the thing is i could remember my security answers so i cannot proceed so please help me out .

There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

I have Firefox 6.0 running under Windows XL. When I forward an email with a URL in it, my recipients tell me the URL is not highlighted and they have to cut and paste it into their browser. Why? How can I get my forwarded URLs to be highlighted?

I have Firefox 6.0 running under Windows XL. When I forward an email with a URL in it, my recipients tell me the URL is not highlighted and they have to cut and paste it into their browser. Why? How can I get my forwarded URLs to be highlighted?

If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
This one will create the form, database and send out the emails...
http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

Application Runs Under Windows 8.1 But Not Under Windows XP (I Know XP Is Deprecated)

The problem is with the obtuse error message put out by Windows's program loader. It reads, in part, "..is not a valid Win32 application." The application runs everywhere except on Windows XP. Looking for root cause of the problem. It's a very
simple application. Only a few lines of code.
C:\Packaged-Software\32-BIT\Reboot.exe is not a valid Win32 application.
Proposed nature of the problem:
1. The file was downloaded from a website but the download was incomplete.
2. The full file system filename path contains bad characters such blank space.
3. Visual Studio constructed an application that won't run anywhere much less on XP.
4. The supporting libraries are not properly installed (e.g. .NET Framework4, and VCREDIST).
Retorts:
1. The file wasn't downloaded from a website and is intact.
2. The filename path doesn't contain any spaces.
3. The application runs under Windows 8.1. Also on Windows 7.
4. The supporting libraries are properly installed.
So, what's the problem? One surely will not discover the root cause from "not a valid application."
Body must be 4 to 60000 characters long. I had put the code here. It isn't 60000 character long. But it validated as if there are more than 60000 characters. Sorry for the incomplete submission due to website construction error.
MARK D ROCKMAN

Hi F7H2fw,
How did you develop the application ?
Here is a similar symptom and this may explain the issue somehow:
Setup.exe is not a valid Win32 application
http://blogs.msdn.com/b/vsnetsetup/archive/2012/10/16/setup-exe-is-not-a-valid-win32-application.aspx
I suspect there is a compatibility issue here .
Considering this is more likely a developing issue .It is recommended to ask for help from our MSDN Forum .They are more familiar with the developing issue .If it is possible ,please attach the code in that thread .Thanks for your understanding and cooperation.
MSDN Forum
https://social.msdn.microsoft.com/Forums/en-US/home
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Can't install driver for HP P1006 LaserJet under Windows 8.1 64 bit

Hi,
I can not install the driver for HP P1006 LaserJet under Windows 8.1 64 bit.
I download the driver installation program from the HP website. When I run it, it says reinstalling the driver files, then copying files to the hard drive and then it crashes. I also tried using the driver CD that came with the printer to no avail.
The printer works fine on my other laptop with Vista on it. Help!

Hi peshi77,
Welcome to the HP Support Forums! I see you are trying to install your HP Laserjet P1006 to your computer running Windows 8.1, but everytime you attempt to extract the files it crashes. After some research I see there were no updated drivers made available for the Windows 8.1 OS, you must install the Hostbased Plug and Play Basic Driver, to get the basic printing functions. Please click on the link below to download and install:
HP LaserJet P1000-P1500 Hostbased Plug and Play Basic Driver
Once downloaded, please follow the on screen instructions. I hope this helps!
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

I want to install Adobe PageMill 3.0 on my laptop which runs under Windows Vista but cannot because the original input was on floppy discs, and I don't have a floppy disc drive.

Is Adobe PageMill 3.0 still available? I use it to run three websites but it does not run on my new desktop which has a 64-bit operating system. However it would run on my laptop which runs under Windows Vista. But the original installation was from floppy discs and I do not have a floppy disc drive.

I am sorry Lcosahedron I am not aware of a download location for Adobe PageMill 3.0. It appears it was discontinued in 1999. You can find more details at Adobe PageMill - Wikipedia, the free encyclopedia.

Can you export a Quick Time REFERENCE file from Final Cut Pro X?

Used to be in FCP-7, you could export your timeline and at the bottom of the Export dialog box, there was a check box where you could check "Make the movie self-contained," which would export a full Quick Time .mov file, or you could UNCHECK that box and FCP would export a Quick Time REFERENCE file (referencing the source media used within the timeline), which you could then bring in to any one of a number of different encoding apps.
I prefer to use Sorenson Squeeze to do my encoding, as it's much, much faster than Compressor and has infinitely more format options (Flash, Windows Media, Real, etc., etc.).
But now, I don't see a way to export a Quick Time Reference file from the Final Cut Pro timeline, er, uh, storyline, er, uh, project.
Anybody know if there's a way to export a Quick Time REFERENCE file (not a full Quick Time .mov)?

R&B wrote:
Anybody know if there's a way to export a Quick Time REFERENCE file (not a full Quick Time .mov)?
I do the same thing with Final Cut Express, actually. Only I then open the reference file up in QuickTime Pro and re-export it to an h.264 mp4. I can do that multiple times in the background vs. getting caught up in Final Cut's pathetically non-threaded user interface when it's saving/exporting.
I was going to ask the exact same question here, but you beat me to it. And so far it sounds like the answer is "no" ... :-(
jas

FCE crashes when export using Quick Time

Hi All,
When I select "Export - Using Quick Time Conversion", FCE crashes. I tried to repair permissions and rebooted but it did not help.
Export using QT was working fine last week. I did some maintenance checks with Onyx over the weekend. Could it be the problem.
Any suggestions for fix?
Thanks.

2007 MacBookPro
Mac OSX V10.6.3
2.2 GHZ Intel Core 2 Duo
4GB RAM
FCE Scratch Disk is an external 500GB drive (it has always been and it's been working fine the last 1.5 years) External drive is connected via FW800.
In Final Cut, I use HDV1440X1080 1080i. Please let me know if you need any other settings.
I use Quick Time V10.0 (113)

Do IMAQ Cast Image or IMAQ Linear averages give different results when using different computers that are running under Windows XP ?

Hello
I'm currently developping an image processing algorithm using Labview 7.1 and the associated IMAQ Vision tools. After several tests, I found a weird result. Indeed, I put the labview algorithm - including the IMAQ VI on the library to get sure that I use all the time the same VI - on my memory stick and used it on two different computers. I tested the same picture (still in my memory stick) and had two very different results.
After several hours trying to understand why, I found that there were a difference between the results given by both computers at the very begining of the algorithm. Indeed, I used a JPEG file.
To open it, I first create an Image with IMAQ Create (U8). Then, I open it.
Then in my first sub-VI, I use IMAQ Cast Image to be sure that the picture is a U8 grayscale picture.
Right after that, I use the IMAQ Linear Averages. The results of this VI are different on the two computers.
I tried several time on the same picture : one computer always give me the same result but the two computers give me a different result. So there is no random variable on the results.
So my question is : Do IMAQ Cast Image or IMAQ Linear averages give different results when using different computers that are running under Windows XP ?
My bet is on IMAQ Cast Image but I'm not quite sure and I do not undestand why. The labview and IMAQ are the same on both computers.
The difference between the two computer are above :
Computer 1 :
Pentium(R) 4 CPU 3.20GHz with a RAM of 1Go. The processor is an Intel(R).
The OS is windows XP Pro 2002
Computer 2 :
Pentium(R) 4 CPU 2.80GHz with a RAM of 512Mo. The processor is an Intel(R).
The OS is windows XP Pro 2002.
If anybody can help me on this problem, it would be really helpful.
Regards
Florence P.

Hi,
Indeed it's a strange behaviour, could you send me your VI and your JPEG file, (or another file that reproduces) so that I could check this inthere ?
I'll then try to find out what's happening.
Regards
Richard Keromen
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> Découvrez, en vidéo, les innovations technologiques réalisées en éco-conception

HT204382 what is the best apple download for quick time?

what is the best apple download for quick time?

None. Just run QuickTime. It is part of your Lion system. It is in your Application folder.

Export for quick time running under windows?

Similar Messages

Maybe you are looking for