Export form AddressBook in Leopard are old data only

Hi,
When I export my address book from AddressBook on Leopard, it exports only my old address book from Tiger...
In my Application Support/AddressBook I have this 2 files of DB :
-rw------- 1 dulrich dulrich 421888 Oct 30 08:10 AddressBook-v22.abcddb
-rw------- 1 dulrich dulrich 5724020 Oct 27 04:22 AddressBook.data
I install Leopard de Oct 27.... After that I made some modification on my address book... When I export from AddressBook it's this file which is exported and not the last.

Sorry I post it in Leopard forum not here !
You can delete it

Similar Messages

Webi report gives old data in infoview on refresh

Hi Experts,
We are facing this strange issue on a webi report after some data updation in the SAP BW infocube.
The webi report is based on the universe which is connected to an infocube in our BW dev system. After some data updation in the cube, we had tested the report in webi rich client and everything was working fine (the newly updated data from cube was reflecting). Now, we had tested the same report in infoview, but it was showing the old data only. We had tried exporting the report once again to infoview, refreshed universe structure; but without any success.
What appeared to be even more strange was that the last refresh time was also not changing. While running the report in the infoview it hardly takes 40secs. But on refreshing it says the last refresh time was 5mins.
Any help on this would be highly appreciated.
Regards,
Arun.

it sounds like when you refresh report in Infoview you get the cached data, it never goes to the DB to fetch new one...
You'll need to enable traces on webi processing server as well as SOFA/MDX tracing and review log files to see if requests are going to db or not and what is being returned.
It could be at webi proc level or at your BW level.
You can also try disabling webi caching in webi proc server properties and see what happens.

Export to PDF, Excel, Excel (Data Only) formatting issues

Hi Community
I have a report that consists of 5 subreports. Out of the 5 subreports, 3 of them have a similar format whereas the other 2 are different.
Iu2019m currently facing an issue whereby the exports to excel works fine, but excel (data only) has some alignment issues(i.e. the data appears below the correct columns). However, when the report is tweaked to make export to excel (data only) appear correctly, the export to excel had its data shifted out of alignment. There is no impact to pdf exporting at the moment.
Are there any people who are facing similar issues? Is there any resolution or workaround? I appreciate any help. Thanks.
FYI, the version of crystal reports is Crystal reports is Crystal reports 2008 and we are using the crystal report viewer interface to export into excel and pdf formats. The excel version is 2007.
Regards

DW, i've also run into issues with multiple sub reports. I resolved it by putting each sub report into it's own section, and then suppressing the sub report (Note, if ur trying to export subreport data to excel, I don't think its going to work. You'd need to create shared variables and then bring those sub report shared variables into your main report).
Once you bring your shared variables into the main report, suppress your sub reports, and then export to excel, you're still left with a dataset that has missing rows. This is ok. You can solve it easily within the excel file itself by sorting the data on a unique ID like Account #. This removes the extra rows.
Not the most elegant solution, but it works.

Failed to export the report... to Microsoft Excel (97-2003) Data-only

I'm using Crystal Report version 12.1.0.892
I'm trying to export reports to 'Microsoft Excel (97-2003) Data-only' (an option I use all of the time), and am getting the message "Failed to export the report."
It only started this week. I can export to "'Microsoft Excel (97-2003)" (and PDF, etc.) without incident, but it's not what I want.
I have not made any changes to Crystal Reports, but have applied updates to Microsoft Windows XP (ver 2002, SP 3).
Any ideas?

I'm having the same error and have a subreport with 3 groups. The subreport data being returned is all in the Details section. All other sections of the sub are suppressed.
I can export the main report fine (it's just headers). I can also drill into the sub and export that fine, but of course get back only limited data. When I try to export the whole thing it chokes.
Any thoughts?
Many thanks for your help.

Export in AddressBook are from the old Tiger DB

Hi,
When I export my address book from AddressBook on Leopard, it exports only my old address book from Tiger...
In my Application Support/AddressBook I have this 2 files of DB :
-rw------- 1 dulrich dulrich 421888 Oct 30 08:10 AddressBook-v22.abcddb
-rw------- 1 dulrich dulrich 5724020 Oct 27 04:22 AddressBook.data
I install Leopard de Oct 27.... After that I made some modification on my address book... When I export from AddressBook it's this file which is exported and not the last.

I am not sure I understand what you are seeing, but I have this suggestion. If you will no longer be running Tiger on your computer, you can move the AddressBook.data file out of the Address Book directory which is ~/Library/Application Support/AddressBook/ . Any time you export a backup archive, it will make a copy of all of the contents of that directory. Taking that file out of that directory though would mean that there's no way to import the contacts on Tiger.

Column headings are mismatched when export to excel (Data Only)

Hi All,
We have an old Crystal Web Portal designed using CE10 in VS 2003.   The crystal viewer shipped with VS 2003 exports to excel (Data only) in correct order where all the columns headers are matched with the corresponding data.
We have re-written the entire new web portal in VS 2008 with using CE10 on windows 2003 server. Everything works we can view the report, page navigation, export to PDF, export to MS Excel 97-2000.   However when export to MS Excel 97-2000 (Data only) option, the column headings are mismatched with the corresponding data.   I don't understand what changed between VS 2003 Crystal Viewer and VS 2008 Crystal Viewer.   I think this has to be the crystal viewer problem because I'm exporting from the viewer tool bar.
Here is the API referencing in the code:
In Visual Studio I'm referencing all CE10 10.0.3300 version api's. Howerver since Crystal Viewer with VS 2008 is newer and has 10.5.3700 version I'm using CrystalDecision.Shared and CrystalDecision.Web are version 10.5.3700.   These seems to have no problem. The entire web portal works fine.
More about Web Portal:
-User is validated upon login with CE10
-use selects the report from the list
-Report ID is then passed to reportdocument
-reportdocument API loads the report and
-Viwer.reportsource= reportdocument.reportsource
We cannot update Crystal Enterprise 10 right now.   I'm in the middle of deploying new web portal with VS 2008.   I have to resolve the Export excel (Data only) option and have the column headers matched with the data in excel.   I have tried everthing.
Can some help here.
thanks

Hi,
The report saves the printer information and if it can connect to the exact same printer then the print options will get passed to the printer.
If the report is being sent to a different printer, Crystal doesn't know if this new printer will support the same settings, ie. duplex or color. In our case we were setting the report to print duplex printing and landscape. When our application went to print it actually crashed because some of the printers didn't support duplex.
What we did is disable the print button on the viewer and added the PrintDialog control to our form. Use the ReportDocument.PrintOptions method to set the properties for the PrintDialog control.
var printDialog1 = new PrintDialog();
printDialog1.UseEXDialog = true;
printDialog1.AllowSomePages = true;
if (myLink.Parent.SavedPrinterSettings != null)
     printDialog1.PrinterSettings = myLink.Parent.SavedPrinterSettings; //Use any saved printer settigns
     printDialog1.PrinterSettings.Copies = Convert.ToInt16(copies);
     dr = printDialog1.ShowDialog();
     if (dr == DialogResult.OK)
     myLink.Parent.SavedPrinterSettings = printDialog1.PrinterSettings;     //Save the latest printer settings
     nCopy = printDialog1.PrinterSettings.Copies;               //Get the number of Copies
     sPage = printDialog1.PrinterSettings.FromPage;               //Get the number of Start Page
     ePage = printDialog1.PrinterSettings.ToPage;                    //Get the number of End Page
     myReport.PrintOptions.PrinterName = printDialog1.PrinterSettings.PrinterName;     //Get the printer name
     myReport.PrintOptions.CustomPaperSource = printDialog1.PrinterSettings.DefaultPageSettings.PaperSource;
     if (printDialog1.PrinterSettings.Duplex == System.Drawing.Printing.Duplex.Vertical)
          myReport.PrintOptions.PrinterDuplex = PrinterDuplex.Vertical;
     else if (printDialog1.PrinterSettings.Duplex == System.Drawing.Printing.Duplex.Horizontal)
          myReport.PrintOptions.PrinterDuplex = PrinterDuplex.Horizontal;
     else if (printDialog1.PrinterSettings.Duplex == System.Drawing.Printing.Duplex.Simplex)
          myReport.PrintOptions.PrinterDuplex = PrinterDuplex.Simplex;
Hope this helps,
Brian

PDF form storing old data

Hello, I am new to the forum and was hoping someone here would be able to help me with an issue I have run into or help me find someone who could.
I was recently working on a security assessment of a website and I found a PDF document for an employement application that appears to store old data within the code of the document. To explain further:
- I found the PDF form document on the website. When downloaded and opened with Reader it appears blank. The document is avaiable to download and then you are directed to email it to HR, so there is no online submission on the website.
- When opened in a text editor it displays mostly encoded text and numbers but there is portion of the document with lines that correspond to the fields in the document and contain information from previous instances of the document that has been filled out.
Has anyone encountered this before? If yes are there any remediations for a PDF form storing unwanted data within the code of the document?
Thanks in advance and sorry if I have posted this in the wrong location.

Filling in online forms should never allow the form to be saved back to the website. Usually such a form (or any online document) would go to the user's browser's temp folder, and be saved in there. I don't know how it was possible that user data got back onto the web server form (unless it was originally uploaded like that).
What I would do if I encountered such a situation
upload the clean, empty form
make sure the file is read-only
test it by filling in the form online
see if the original form has been altered in any way

Datepicker remembers old date in form

I use Apex 3.2 and have an issue with the Date picker, using a Database Column as source
I want to edit an existing item on a form with a Date Picker. The current date is f.e. 2011-12-30. I want to change this to 2012-05-16.
For this, I open the Date Picker in my form and chose my new date (2012-05-16) and the date picker closes. Lets I assume I made a mistake and want to select 2012-05-17. I will open the datepicker again to adjust the date 1 day. However the month and year selected in the data picker is again the old date 2011 and 12, when I would expect it to be 2012 and 5. So I need to select the right month and year again.
Is there a way to load the date picker, so the date picker is loaded with the correct month and year?

Entries for the location bar are stored in the places.sqlite file.
Form data for web pages and for the search bar are stored in the formhistory.sqlite file.
You shouldn't see old data appearing once you delete this file, so if this does happen then make sure to delete the file in the correct location.
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Versioned or old data in Live Cycle Form?

While working with LiveCycle forms, we received one from a customer that had an odd behavior. When looking at it through Acrobat reader, we got the data we expected. When attempting to use some other tools to extract data, we got a whole other set of data for the forms.
Our customer(s) use the form as a template, pastes the latest data into the form, and then uses Save As to create a final copy to send to us. Using some Linux tools we found that the form was actually maintaining at least three different sets data that had been used to fill the form. It turns out that the Acrobat products were reading the latest data, while our other tools were picking up the first set.
First the important question: Is there some sort of versioning switch or command I can use to ensure that the form contains ONLY the latest set of data?
Less important but interesting question: Why is the form saving this old data, and how much bloat can be expected?
Thank you in advance.

We are experiencing a similar issue. It appears that the form saves data that has been put into the form. I don't know if it is some sort of versioning, or an error. I, too, have asked if there is some way to "turn off" this behavior
I would appreciate it if you keep me in mind should you receive an answer to this question.

Adobe X pro, export forms data to fdf, then import into new form using automation?

Is there a faster way to export 13 page forms pdf data out to fdf and then import I back into a new pdf form. There are a total of 167 pdf files with total of 130 some field on each form. The fields are all the same in each document. I want to make a macro or script to automate this process. I don’t want to to open all 167 files then export them one at a time. then creat167 new files and import all that data back in. Also each file is the name of the person who filled it out. I could automate the copying of the new 2012 pdf to make 167 new ones each with their name using VBA. But if that could be automated in adobe great.
We have to make new admission forms for next year. Currently all the dates and fees are this year. So I had to update all the pages in Publisher and reprint them to pdf. We are sending the forms back to people with the data already entered since 95% of it did not change. This helps save them time in having to re-fill out the entire form again.
Or any other suggestions
TIA

try67, I do have Pro as stated in the title “Adobe X pro, …”
George,
the position of the forms fields is exactly the same. But now that I think of it the data in the pdf’s is slightly older than the exported info in Access as I explain further below.
George, I can create 167 files in an instant using VBA, I in fact have all the names in Access and did this already.
I also forgot, I have all the data from all the forms in Access now. So it would be better to use that since it is more up to date than the pdf forms. Any email and phone number changes were changed in Access. I clicked Manage Form data/ export to txt in Adobe and imported that into Access with a VBA and a macro.
So I really just need to open each particular file and import the data into it.
So can I call the whole process from VBA? Using a Active-X reference in VBA to get to control Adobe?
I write VBA in my sleep so if it can be done there, Fantastic.

Help with exporting forms based data to Excel 2007

I have a user who is attempting to export forms based data to Microsoft Excel 2007 and when he attempts this he receives a message stating that Windows does not recognise this file type (tsv). I am not too familiar with Office 2007 so I am unable to direct this users as to how to correct this issue.
Is someone able to give me the navigation path to help me to assist this user? thanks

Did you verify the file type from Windows Explorer?
1) Right click on My Computer > Explore
2) Go to Tools > Folder Options
3) Click on File Types tab
4) Check if TSV file is defined there or not. If it is not there, click on New and add the File Extension

My iTunes account no longer has everything on my iPod-5th gen. I want to put everything on my iPod on my iTunes on my new laptop without losing new purchases that are on the iTunes account or the old data on the iPod.

My iTunes account no longer has everything on my iPod-5th gen. I want to put everything on my iPod on my iTunes on my new laptop without losing new purchases that are on the iTunes account or the old data on the iPod.

See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

OS 10.5.8 Leopard. Recovering old data from Time Machine after HD replacement.

Okay, I have and iMac dual core Model A1224, EMC 2210, 20" screen, 2.66GHz processor, 2GB RAM, came, when I bought it, with a 500 GB drive circa late 2008. The drive started to fail about 2 weeks ago, random shut downs, wouldn't boot up, couldn't find the OS. Could sometime recover booting up from the original OS disk in the C drive, but eventually even that failed. Had run disk first aid and TechTool Pro6 to no avail, they all passed the drive so it was a mechanical failure,not bad sectors.
REPLACED the drive with a brand new Seagate Barracuda 1TB drive, figured I was all set, Time Machine had backed up the old drive every day since 2009 to an external 1TB drive. I could even see the data there. Now new drive is installed and I need to load the OS to it and retrieve my data from Time Machine. Put in the old disk, Leopard 10.5.1, and walked along and asked it to bring in the data from Time Machine.... except, the data is saved on Time Machine in a new version of Leopard, ver. 10.5.8 and so the 10.5.1 version can't import it, but of course Migration Assistant will allow you to import it later.
So, I continue to load the OS via the disk, then go to software update after creating a new computer name, which I didn't want to do. Updated the software so I am now running OS 10.5.8, open Migration Assistant and attempt to migrate / recover the old data from Time Machine. I can get some stuff, but it insists on my resetting everything up all over again, all new accounts in Quicken and Thunderbird and Microsoft Office, no recovery of data already there and I can't access the accounts that were set up by others, it indicates I don't have sufficient privileges though I was an Administrator on the old computer and on the current system as well.
Frankly, I need that old data, so how do I get it? Do I bite the bullet and upgrade the system to Snow Leopard OS10.6.XX, will that allow me access to old data under OS 10.5.8? Will it be backwards compatible? How about moving up to Lion? Would that be a better way to go and will I be able to recover that old data then?
VERY frustrated here! Thanks for help or direction you all can provide.

HI,
Have you looked through Pondini's extensive TM help site?
http://Pondini.org/TM/FAQ.html
http://pondini.org/TM/Troubleshooting.html
Can't imagine what he hasn't covered!

Cross Tab export : Excel Data Only - Row headings are *bottom* aligned?

Hi All,
Having a problem with Crystal 11 / BOXI.
I have a Cross Tab working fine that has four Row groupings (labels on the left).
In Preview mode, it looks as expected. Row #1 label appears on line 1. Row #1 label shows blank on line 2,3,4 etc until it is ready to change.
The organization of the Row group is further made clear by a nice box that spans multiple rows. The Row label appears at the TOP of this box as you might expect.
In Excel-Data Only format, there is a problem. (I saved, scheduled, and ran on BO XI Enterprise CMC console.) The Excel file shows the Row 1 labels without any box (that's OK as it is "data only") however the text is bottom aligned. So the first label does not appear until the final row of the grouping.
Same thing is happening with Row 2, 3 groupings, they are all bottom aligned.
It's confusing for the users who would expect the Row grouping labels to be all top-aligned.
I have searched the forums and support site and read all technotes. I also tried several things including:
Format Field for Row#1 Name, choosing Left/Right/Center horizontal alignment (where is the same for vertical??)
Within BO Enterprise, try combinations of options under Excel - Data Only : export formatting, maintain relative object position, maintain column alignment, use options saved with report, etc.
Any ideas? Is there a way to force a top-alignment programmatically, for Excel Data Only output?
Help appreciated !
Rob McCauley
Cognex
Natick, MA 01760 USA

I found the answer to this question with help from SAP Support.
In the Cross-Tab Expert, Customize Style tab, click "Column Totals on Top".
Then, the Excel Data Only report will show the row titles Top-aligned for the row group.

Images exported using Leopard are soft compared to Tiger.

I've been working on exporting images for client preview and noticed that the images I'm exporting under Leopard seem a bit soft. I checked my export settings and everything looks the same as it did under Tiger.
For comparisons sake, I exported several images that had previously been exported under Tiger and there is a definite difference. Side-by-side, the images exported using Leopard are much softer than the images exported using Tiger. The edits on these images were all previously done using Tiger.
Has anyone else noticed this?
I'm using 1.5.6 on 10.5.1.
Thank you!
Cheers,
Anthony
Message was edited by: Barbatto - Fixed Subject Line

Janet Taylor wrote:
Everything looks fine for me from Aperture and LR. I did a clean install of Leopard and all my apps on a Macbook Pro. Are you looking at images in photoshop to compare them? Preview is not a reliable way to check for sharpness right now, since some rocket scientist decide it would be cool if you couldn't scale in set increments anymore, and the randomly scaled rendition can be very soft. As a follow-on to that thought, are the images on your web site displaying at the size you exported them at? If they're being scaled on the web page, and safari is using the same rendering engine as Preview, it's possible that it's making the images look soft.
hope i said something useful.
Hi Janet,
Hmmm, perhaps the fresh install is the way to go? I'm using Photo Mechanic view the exported images, not Preview or Safari. I only mentioned Preview in an earlier thread because in other discussions I've found, Preview appears to exhibit some of the same softness that myself and a few others are experiencing with our Aperture exports.
Here's a screen grab of two images rendered side-by-side in PhotoMechanic. The top image was exported using Tiger while the bottom image was exported using Leopard. The actual edits on the image (white balance, sharpness, etc) were done previously in Tiger. The only thing I did to the image in Leopard was export it.
http://www.barbatto.com/misc/comparison.jpg
In this example, it's pretty obvious that the image exported with Leopard is much softer. Also note that the file size is slightly smaller for the Leopard exported image.
As for the images on my website, most of them were exported with Aperture under Tiger. Since I've upgraded to Leopard and have been experiencing soft images, I've been using Canon's Digital Photo Professional to export any newer shots I've placed on my site.
Regarding Lightroom, I installed the trial and its exports were flawless. They don't exhibit any of the softness I am experiencing with Aperture.
So, right now, I'm at a loss. I experience this softness on both my MacPro and MacBook Pro. It should be noted that both machines were upgraded. Perhaps I should take some time and do a clean install on one of the machines and see if my results are any different. Or keep my fingers crossed that 10.5.2 will solve my problems
Thanks for your comments!
Cheers,
Anthony

Export form AddressBook in Leopard are old data only

Similar Messages

Maybe you are looking for