Export/Import error : ORA-31609: error loading file "kualter.xsl"
Hi ,
I was exporting the database , I got the following error after that I found that dbms_metadata_util.load_stylesheets needs to run . Please assit me how to procced further .
C:\Users\379164>expdp import1/import1 directory=dmp_dir dumpfile=dump.dmp full=
Export: Release 10.2.0.1.0 - Production on Friday, 15 October, 2010 14:50:45
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
ORA-39006: internal error
ORA-39213: Metadata processing is not available
====================================================================
SQL> execute dbms_metadata_util.load_stylesheets
BEGIN dbms_metadata_util.load_stylesheets; END;
ERROR at line 1:
ORA-31609: error loading file "kualter.xsl" from file system directory
"C:\oraclexe\app\oracle\product\10.2.0\server\rdbms\xml\xsl"
ORA-06512: at "SYS.DBMS_METADATA_UTIL", line 1793
ORA-06512: at line 1
Please help me on this ....
Thanks
Refer following MOS note (even though the error number is different in header)
Ora-39213 Using Data Pump Export (Doc ID 402242.1)
Similar Messages
-
Error ORA-03113: end-of-file on communication channel in droppping a table
Good evening,
I am very new on Oracle and I have a problem with some tables. Without any reason, apparently, I can't drop some of my table. Oracle gives me this error:
ORA-03113: end-of-file on communication channel
and then close the connection of the user.
What I should have to do?
It is very important.
Thanks a lot
best regards
Anna ZanettiGood morning, I still have the same problem, I can't drop a table from my database.
The message is again:
Re: Error ORA-03113: end-of-file on communication channel
The alert log file says:
Fri Nov 17 12:27:31 2006
Errors in file /usr/oracle/admin/oracledb/udump/oracledb_ora_4369.trc:
ORA-07445: exception encountered: core dump [0955C61F] [SIGSEGV] [Address not mapped to object] [0xC] [] []
and in file oracledb_ora_4369.trc there is:
Exception signal: 11 (SIGSEGV), code: 1 (Address not mapped to object), addr: 0xc, PC: [0x955c61f, 0955C61F]
Registers:
%eax: 0x00000000 %ebx: 0x00012d95 %ecx: 0x58301930
%edx: 0x00000000 %edi: 0x5830d9e8 %esi: 0x00000000
%esp: 0xbfffae1c %ebp: 0xbfffb060 %eip: 0x0955c61f
%efl: 0x00210282
(0x955c61f) movzw 0xc(%eax),%eax(0x955c623) cmp $30,%eax
(0x955c626) jle 0x955c63e
(0x955c628) xor %edx,%edx
(0x955c62a) push %edx
*** 2006-11-17 12:27:31.658
ksedmp: internal or fatal error
ORA-07445: exception encountered: core dump [0955C61F] [SIGSEGV] [Address not mapped to object] [0xC] [] []
Current SQL statement for this session:
drop table fiumiforjoin
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)
08856247 call 0885776A 1 ? 0 ? 1 ? 1 ? 0 ? 0 ?
08290320 call 0885605A 3 ? 0 ? 0 ? 0 ? 0 ? 0 ?
0955C61F signal 08290320 B ? BFFFAAB0 ? BFFFAB30 ?
0955D6BE call 0955C61F 5830F01C ? 0 ? FFFFFFFF ? 0 ?
1 ? 5830F01C ?
08DD1EEB call 0955CC22 BFFFB394 ? 0 ? 0 ? BFFFB348 ?
58EAB2B0 ? C ?
09434EF3 call 08DD1A28 BF2A8C4 ? BFFFC0C0 ?
BFFFC0C0 ? 4 ? B6AB0300 ?
B6ABC2E0 ?
094106E0 call 094326D4 4 ? 0 ? BFFFC0C0 ?
093D7BB5 call 0940FEF8 3 ? E ? BFFFC1F8 ? A4 ?
093D630C call 093D7AC4 BFFFCDF0 ? BFFFCD08 ? 17 ?
1 ? 0 ? A4 ?
08293DE6 call 0850FFFF 5E ? 14 ? BFFFCDEC ?
0A1ED44D call 08293DE6 5E ? 14 ? BFFFCDEC ? 0 ?
08292122 call 0A1ECAE4 BF2A8C0 ? 5E ? BFFFCDEC ? 0 ?
BFFFD6E8 ? BFFFD6E4 ?
0941F190 call 0829193C 0 ? 0 ? BF2A8C0 ? BF83090 ?
F1 ? 0 ?
08293DE6 call 0850FFFF 3C ? 4 ? BFFFEB08 ?
08291238 call 082937A8 3C ? 4 ? BFFFEB08 ? 0 ?
0828F403 call 08291012 3C ? 4 ? BFFFEB08 ?
08274A3D call 0828F39C BFFFEAEC ? 3C ? 4 ?
BFFFEB08 ? B6CC017C ?
B6C1A17C ?
__libc_start_main() call 08274A3D 2 ? BFFFEBA4 ? BFFFEBB0 ? 0 ?
+218 B6C1C898 ? B7600020 ?
Any idea of what I have to do?
Thanks for your help..
Best Regards
Anna Zanetti -
Error ORA-20003: Cannot read file/... in Cash Management?
Dear All.
I am having this Error in the Cash Management Module on the bank statement load process
Error ORA-20003: Cannot read file /software/d01/oracle/interface/finance/inbound/email.9Nemail.13111507.3445704.cnv.
How do I resolve this error.
Thank you.Hi Lucy,
The error is probably due to one of the reasons:
1. There is no file in the location: /software/d01/oracle/interface/finance/inbound/email.9Nemail.13111507.3445704.cnv.
2. No permission on the file respective file.
Please get the assistance from the DBA to check on this.
Thanks &
Best Regards, -
Unable to open database : error , ora-03113 end of file communication
Hi Guys ,
I am facing a serious issue with my database
machine Oracle Linux Tikanga 5
database : 10.2.0.1
Error : ora-03113
I was trying to drop a logfile , while inserting the data ....
I restored and tried recovering it but it recovers with message , media recover complete but doesnot allows to open the database
gives the same error : Error : ora-03113 end of file communication
alert_log shows
alter database recover if needed
start
Media Recovery Start
ORA-264 signalled during: alter database recover if needed
start
Wed Jan 9 16:20:18 2013
db_recovery_file_dest_size of 2048 MB is 40.79% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Wed Jan 9 16:22:02 2013
alter database recover datafile list clear
Wed Jan 9 16:22:02 2013
Completed: alter database recover datafile list clear
Wed Jan 9 16:22:02 2013
alter database recover datafile list
1 , 2 , 3 , 4 , 5
Completed: alter database recover datafile list
1 , 2 , 3 , 4 , 5
Wed Jan 9 16:22:02 2013
alter database recover if needed
start
Media Recovery Start
ORA-264 signalled during: alter database recover if needed
start
Wed Jan 9 16:22:07 2013
alter database open
Wed Jan 9 16:22:07 2013
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=16, OS id=2049
Wed Jan 9 16:22:07 2013
ARC0: Archival started
ARC1: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC1 started with pid=17, OS id=2051
Wed Jan 9 16:22:07 2013
Repairing half complete open of thread 1
Wed Jan 9 16:22:07 2013
Errors in file /d1/app/oracle/oradata/orcl/bdump/orcl_lgwr_1966.trc:
ORA-00600: internal error code, arguments: [3712], [1], [1], [0], [445262], [0], [445261], []
Wed Jan 9 16:22:08 2013
Errors in file /d1/app/oracle/oradata/orcl/bdump/orcl_lgwr_1966.trc:
ORA-00600: internal error code, arguments: [3712], [1], [1], [0], [445262], [0], [445261], []
LGWR: terminating instance due to error 470
Instance terminated by LGWR, pid = 1966
can you please suggest on the same ..
ThanksDue to the nature of the error and to prevent any trial-and-error, I would highly recommand you to open a service request with Oracle asap.
Oracle too recommands the same.
Thanks... -
Parser Error Message: Could not load file or assembly 'Oracle.DataAccess, V
I'm working on a 64 bit windows 7 ultimate system and I can't get the Oracle.DataAccess and Oracle.Web to load on the helloworld web page
See error below. At the very end i have the gacutil output. Also, the same dll's work on a 32 bit windows 7 system. I've also tried to load the beta version of the odac 64 bit
but it it gets a "java stopped working error"
Thanks in advance
WEB PAGE ERRORVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV
Server Error in '/test/helloworld' Application.
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Could not load file or assembly 'Oracle.DataAccess, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified.
Source Error:
Line 37: <add assembly="System.Xml.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
Line 38: <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
Line 39: <add assembly="Oracle.DataAccess, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89B483F429C47342"/>
Line 40: <add assembly="Oracle.Web, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89B483F429C47342"/></assemblies>
Line 41: </compilation>
Source File: C:\inetpub\wwwroot\test\helloworld\web.config Line: 39
Assembly Load Trace: The following information can be helpful to determine why the assembly 'Oracle.DataAccess, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89b483f429c47342' could not be loaded.
=== Pre-bind state information ===
LOG: User = IIS APPPOOL\DefaultAppPool
LOG: DisplayName = Oracle.DataAccess, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89b483f429c47342
(Fully-specified)
LOG: Appbase = file:///C:/inetpub/wwwroot/test/helloworld/
LOG: Initial PrivatePath = C:\inetpub\wwwroot\test\helloworld\bin
Calling assembly : (Unknown).
===
LOG: This bind starts in default load context.
LOG: Using application configuration file: C:\inetpub\wwwroot\test\helloworld\web.config
LOG: Using host configuration file: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\Aspnet.config
LOG: Using machine configuration file from C:\Windows\Microsoft.NET\Framework64\v2.0.50727\config\machine.config.
LOG: Post-policy reference: Oracle.DataAccess, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89b483f429c47342
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/Temporary ASP.NET Files/test_helloworld/480589f5/895d06ab/Oracle.DataAccess.DLL.
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/Temporary ASP.NET Files/test_helloworld/480589f5/895d06ab/Oracle.DataAccess/Oracle.DataAccess.DLL.
LOG: Attempting download of new URL file:///C:/inetpub/wwwroot/test/helloworld/bin/Oracle.DataAccess.DLL.
LOG: Attempting download of new URL file:///C:/inetpub/wwwroot/test/helloworld/bin/Oracle.DataAccess/Oracle.DataAccess.DLL.
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/Temporary ASP.NET Files/test_helloworld/480589f5/895d06ab/Oracle.DataAccess.EXE.
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/Temporary ASP.NET Files/test_helloworld/480589f5/895d06ab/Oracle.DataAccess/Oracle.DataAccess.EXE.
LOG: Attempting download of new URL file:///C:/inetpub/wwwroot/test/helloworld/bin/Oracle.DataAccess.EXE.
LOG: Attempting download of new URL file:///C:/inetpub/wwwroot/test/helloworld/bin/Oracle.DataAccess/Oracle.DataAccess.EXE.
Version Information: Microsoft .NET Framework Version:2.0.50727.4927; ASP.NET Version:2.0.50727.4927
gacuil output
VVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV
C:\Users\Administrator>C:\"Program Files"\"Microsoft SDKs"\Windows\v6.0A\Bin\x64
\gacutil.exe /l Oracle.DataAccess
Microsoft (R) .NET Global Assembly Cache Utility. Version 3.5.21022.8
Copyright (c) Microsoft Corporation. All rights reserved.
The Global Assembly Cache contains the following assemblies:
Oracle.DataAccess, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89b483f4
29c47342, processorArchitecture=x86
Edited by: burk_s on Jun 6, 2010 2:42 PMHi Mubarak,
Please firstly make sure you installed SharePoint Foundation 2010 with SP2 in a Windows Server 2012 R2. Since only SP2 slipstream installations are supported on Windows Server 2012 R2
http://blogs.technet.com/b/stefan_gossner/archive/2014/05/03/sharepoint-2010-sp2-and-windows-server-2012-r2.aspx
http://blogs.technet.com/b/stefan_gossner/archive/2013/09/19/slipstream-version-of-sharepoint-foundation-2010-with-sp2-included.aspx
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Password file auth - error ORA-01990: error opening password file '/p00/ora
Hi, Im setting up password file auth on our existing database.
Ive run this
orapwd file=orapwdt04.pwd password=secret entries=5
then set this in the .ora file
remote_login_passwordfile=exclusive
But when I restart the dabase im getting this error
ORA-01990: error opening password file '/p00/oraprod/9.2.0/dbs/orapw'
How / where do I tell the database to look for the password file.
Im running on AIX and Oracle 9.2.0.6
thanks for looking.password filename must be in the format of orapw<sid> and location of the file $ORACLE_HOME/dbs
-
Parser Error Message: Could not load file or assembly 'DreamweaverCtrls
Hi,
After attempting to view my first asp.net page I was greeted
with the following error:
Parser Error
Description: An error occurred during the parsing of a
resource required to service this request. Please review the
following specific parse error details and modify your source file
appropriately.
Parser Error Message: Could not load file or assembly
'DreamweaverCtrls, Version=1.0.0.0, Culture=neutral,
PublicKeyToken=836f606ede05d46a' or one of its dependencies. The
system cannot find the file specified.
Source Error:
Line 1: <%@ Page Language="VB" ContentType="text/html"
ResponseEncoding="iso-8859-1" %>
Line 2: <%@ Register TagPrefix="MM"
Namespace="DreamweaverCtrls"
Assembly="DreamweaverCtrls,version=1.0.0.0,publicKeyToken=836f606ede05d46a,culture=neutra l"
%>
Line 3: <MM:Insert
Line 4: runat="server"
Source File: /s4/admin/wiki1/detail.aspx Line: 2
Assembly Load Trace: The following information can be
helpful to determine why the assembly 'DreamweaverCtrls,
Version=1.0.0.0, Culture=neutral, PublicKeyToken=836f606ede05d46a'
could not be loaded.
I have deployed the files using dreamweaver and it says "no
files to deploy". I have a bin folder with the correct .dll in it,
in the correct root folder. So whats happening??
Please help
Cheers
GAre you testing on the server or locally. If the latter is
true make sure
that a copy of the controls is in a bin folder at the
C:\inetpub\wwwroot
level.
Paul Whitham
Certified Dreamweaver MX2004 Professional
Adobe Community Expert - Dreamweaver
Valleybiz Internet Design
www.valleybiz.net
"graham6117" <[email protected]> wrote in
message
news:e2ngbc$sib$[email protected]..
> Hi,
>
> After attempting to view my first asp.net page I was
greeted with the
> following error:
>
> Parser Error
> Description: An error occurred during the parsing of a
resource required
> to
> service this request. Please review the following
specific parse error
> details
> and modify your source file appropriately.
>
> Parser Error Message: Could not load file or assembly
'DreamweaverCtrls,
> Version=1.0.0.0, Culture=neutral,
PublicKeyToken=836f606ede05d46a' or one
> of
> its dependencies. The system cannot find the file
specified.
>
> Source Error:
>
>
> Line 1: <%@ Page Language="VB"
ContentType="text/html"
> ResponseEncoding="iso-8859-1" %>
> Line 2: <%@ Register TagPrefix="MM"
Namespace="DreamweaverCtrls"
>
Assembly="DreamweaverCtrls,version=1.0.0.0,publicKeyToken=836f606ede05d46a,cultu
> re=neutral" %>
> Line 3: <MM:Insert
> Line 4: runat="server"
>
>
> Source File: /s4/admin/wiki1/detail.aspx Line: 2
>
> Assembly Load Trace: The following information can be
helpful to determine
> why
> the assembly 'DreamweaverCtrls, Version=1.0.0.0,
Culture=neutral,
> PublicKeyToken=836f606ede05d46a' could not be loaded.
>
>
> I have deployed the files using dreamweaver and it says
"no files to
> deploy".
> I have a bin folder with the correct .dll in it, in the
correct root
> folder. So
> whats happening??
>
> Please help
>
> Cheers
>
> G
> -
ASPNETCOMPILER error ASPCONFIG Could not load file or assembly Oracle.Data
I have migrated my .Net solution from 3.5 to 4.0 which consist of a class library and a web service. Web serivice is dependent on class library and the class library uses oracle.dataaccess.dll version 4.112.3.0. I have installed ODAC 11.2.0 in my machine.
When I try to build the solution using MSBUILD.EXE I am getting the below error on my build machine.
ASPNETCOMPILER : error ASPCONFIG: Could not load file or assembly 'Oracle.DataAccess' or one of its dependencies. An attempt was made to load a program with an incorrect format. [D:\VEROS_BuildFolder\CDDS_MERGE_CODEDROP_.NETUPGRADE\WEB Services\AppraisalSubmission\AppraisalSubmissionService.metaproj]
And I try to build from VS2010, it is building successfully.
But we need to build only using MSBUILD.EXE which resides in "C:\Windows\Microsoft.NET\Framework\v4.0.30319" path. While building using MSBUILd.EXE the Oracle.DataAccess.dll is getting copied into the BIN folder of the web service. It should reference from GAC location. My build serveer is 64 bit win2008 server. when I checked the dll version install using GACUTIL , I got the below result
C:\Program Files (x86)\Microsoft SDKs\Windows\v7.0A\bin\NETFX 4.0 Tools>gacutil /l oracle.dataaccess
The Global Assembly Cache contains the following assemblies:
oracle.dataaccess, Version=2.112.3.0, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=AMD64
oracle.dataaccess, Version=4.112.3.0, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=AMD64
oracle.dataaccess, Version=4.112.3.0, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
Previous the application was building successfully using framework 3.5 and Oracle.DataAccess.dll version 2.112.3.0.
Please help to build my applicaiton using MSBUILD 4.0 version.Typically, when you get the "load a program with an incorrect format" exception, it's a mismatch in the bit-ness of the Oracle client you're using and the project you're building. By default, .net builds in AnyCPU mode. That means if you do it on a 64 bit system, you'll get a 64 bit (x64) program. That doesn't work with a 32 bit Oracle client. Usually, you'll need to force MSBUILD to build a 32 bit (x86) result. That will use the 32 bit Oracle client successfully. There's probably a command line switch for that. When building in Visual Studio, you can do it from the Build > Configuration Manager menu.
Now in this case it looks like you actually have both 32 and 64 bit versions of Oracle.DataAccess in the GAC, so I'm not sure if you have both Oracle clients or not. If you have one in the \bin with Copy Local = True, you could be getting the wrong one. You'll want to set Copy Local = False on the properties of the reference and remove that file from the \bin. -
Dear All,
I have installed Sharepoint Foundation 2010 in my server 2012 R2 machine. and I restore my existing content database backup into new site collections. and I'm trying to browse the site collection in window, the below error shown..
Parser Error
Message: Could not load file or assembly 'Microsoft.Office.Access.Server.UI, Version=14.0.0.0,
Culture=neutral, PublicKeyToken=71e9bce111e9429c' or one of its dependencies.
<add assembly="Microsoft.Office.Access.Server.UI, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" />
I tried to checked the assembly folder having the DLL or not. but its
not available in the C:\Windows\assembly location. and I'm tried to resolved this issue by HOTFIX. but unfortunately, I can't find out the patch file for MOSF 2010 in server 2012 r2.
Please help me on this issue. I'm very new to sharepoint...
Any help will be more appreciated.
Thanks,
MubarakHi Mubarak,
Please firstly make sure you installed SharePoint Foundation 2010 with SP2 in a Windows Server 2012 R2. Since only SP2 slipstream installations are supported on Windows Server 2012 R2
http://blogs.technet.com/b/stefan_gossner/archive/2014/05/03/sharepoint-2010-sp2-and-windows-server-2012-r2.aspx
http://blogs.technet.com/b/stefan_gossner/archive/2013/09/19/slipstream-version-of-sharepoint-foundation-2010-with-sp2-included.aspx
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Getting error "ORA-03113: end-of-file on communication channel"
HI ,
When Iam trying to compile a procedure in SQL *PLUS ,iam getting the following error :
ORA-03113: end-of-file on communication channel and the connection is getting lost .There is no issue with the code .
When i compile the same procedure in sql developer ,connection is getting lost and getting error
"Connection Closed
Vendor Code 17008"
Please help me to resolve the issue .
Thanks in advance ...Hi
Here is the code which is not getting compiled and is giving the above said error
CREATE OR REPLACE PROCEDURE SP_Upload_CrossWalk
(src_dom_nm IN VARCHAR2, src_sys_nm IN VARCHAR2, src_dta_elem_nm IN VARCHAR2, src_cd_val_txt IN VARCHAR2,
src_cd_val_desc IN VARCHAR2,src_cd_val_grp_desc IN VARCHAR2, tgt_dom_nm IN VARCHAR2, tgt_sys_nm IN VARCHAR2,
tgt_dta_elem_nm IN VARCHAR2, tgt_cd_val_txt IN VARCHAR2, tgt_cd_val_desc IN VARCHAR2,cd_map_typ_desc IN VARCHAR2,
eff_dttm IN VARCHAR2, term_dttm IN VARCHAR2, errtext OUT VARCHAR2)
IS
src_dom NUMBER;
src_key NUMBER;
src_elem NUMBER;
tgt_dom NUMBER;
tgt_sys NUMBER;
tgt_elem NUMBER;
src_val_seq NUMBER;
tgt_val_seq NUMBER;
src_cd_val_seq NUMBER;
cd_val_map_key_sq NUMBER;
temp_var VARCHAR2(500);
var_len NUMBER;
map_code CHAR(1);
invalidlength_exception EXCEPTION;
unknown_exception Exception;
BEGIN
var_len := LENGTH(src_cd_val_txt);
IF var_len > 20 THEN
temp_var := 'Length of Source Code Value Text Name is more than 20 characters';
RAISE invalidlength_exception;
END IF;
var_len := LENGTH(src_cd_val_desc);
IF var_len > 255 THEN
temp_var := 'Length of Code Value Desc is more than 255 characters';
RAISE invalidlength_exception;
END IF;
var_len := LENGTH(tgt_cd_val_txt);
IF var_len > 20 THEN
temp_var := 'Length of Target Code Value Text Name is more than 20 characters';
RAISE invalidlength_exception;
END IF;
var_len := LENGTH(tgt_cd_val_desc);
IF var_len > 255 THEN
temp_var := 'Length of Target Code Value Desc is more than 255 characters';
RAISE invalidlength_exception;
END IF;
var_len := LENGTH(src_cd_val_grp_desc);
IF var_len > 255 THEN
temp_var := 'Length of Code Value Group Desc is more than 255 characters';
RAISE invalidlength_exception;
END IF;
BEGIN
SELECT dom_key INTO src_dom FROM cu_cdm_dom WHERE dom_nm = src_dom_nm;
EXCEPTION
WHEN TOO_MANY_ROWS THEN
temp_var := 'Too many rows for Domain Key value lookup for Source Domain Name: '||src_dom_nm;
RAISE TOO_MANY_ROWS;
WHEN NO_DATA_FOUND THEN
temp_var := 'Domain Key value lookup failed for Source Domain Name: '||src_dom_nm;
RAISE NO_DATA_FOUND;
WHEN OTHERS THEN
temp_var := 'Unknown error in the Domain Key value lookup for Source Domain Name: '||src_dom_nm||' :
'|| sqlerrm;
RAISE unknown_exception;
END;
BEGIN
SELECT sys_key INTO src_key FROM cu_cdm_sys WHERE sys_nm = src_sys_nm;
EXCEPTION
WHEN TOO_MANY_ROWS THEN
temp_var := 'Too many rows for System Key value lookup for Source System Name: '||src_sys_nm;
RAISE TOO_MANY_ROWS;
WHEN NO_DATA_FOUND THEN
temp_var := 'System Key value lookup failed for Source System Name: '||src_sys_nm;
RAISE NO_DATA_FOUND;
WHEN OTHERS THEN
temp_var := 'Unknown error in the System Key value lookup for Source System Name: '||src_sys_nm||' :
'|| sqlerrm;
RAISE unknown_exception;
END;
BEGIN
SELECT dta_elem_key INTO src_elem FROM cu_cdm_dta_elem WHERE dta_elem_phys_nm = src_dta_elem_nm
AND dom_key = src_dom AND sys_key = src_key;
EXCEPTION
WHEN TOO_MANY_ROWS THEN
temp_var := 'Too many rows for Data Element Key value lookup for Source Data Element Physical Name:
'||src_dta_elem_nm|| ', Source Domain Key: '||src_dom||' and Source System Key: '||src_key;
RAISE TOO_MANY_ROWS;
WHEN NO_DATA_FOUND THEN
temp_var := 'Data Element Key value lookup failed for Source Data Element Physical Name:
'||src_dta_elem_nm|| ', Source Domain Key: '||src_dom||' and Source System Key: '||src_key;
RAISE NO_DATA_FOUND;
WHEN OTHERS THEN
temp_var := 'Unknown error in the Data Element Key value lookup for Source Data Element Physical
Name: '||src_dta_elem_nm|| ', Source Domain Key: '||src_dom||' and Source System Key: '||src_key||' : '|| sqlerrm;
RAISE unknown_exception;
END;
BEGIN
SELECT dom_key INTO tgt_dom FROM cu_cdm_dom WHERE dom_nm = tgt_dom_nm;
EXCEPTION
WHEN TOO_MANY_ROWS THEN
temp_var := 'Too many rows for Domain Key value lookup for Target Domain Name: '||tgt_dom_nm;
RAISE TOO_MANY_ROWS;
WHEN NO_DATA_FOUND THEN
temp_var := 'Domain Key value lookup failed for Target Domain Name: '||tgt_dom_nm;
RAISE NO_DATA_FOUND;
WHEN OTHERS THEN
temp_var := 'Unknown error in the Domain Key value lookup for Target Domain Name: '||tgt_dom_nm||' :
'|| sqlerrm;
RAISE unknown_exception;
END;
BEGIN
SELECT sys_key INTO tgt_sys FROM cu_cdm_sys WHERE sys_nm = tgt_sys_nm;
EXCEPTION
WHEN TOO_MANY_ROWS THEN
temp_var := 'Too may rows for System Key value lookup for Target System Name: '||tgt_sys_nm;
RAISE TOO_MANY_ROWS;
WHEN NO_DATA_FOUND THEN
temp_var := 'System Key value lookup failed for Target System Name: '||tgt_sys_nm;
RAISE NO_DATA_FOUND;
WHEN OTHERS THEN
temp_var := 'Unknown error in the System Key value lookup for Target System Name: '||tgt_sys_nm||' :
'|| sqlerrm;
RAISE unknown_exception;
END;
BEGIN
SELECT dta_elem_key INTO tgt_elem FROM cu_cdm_dta_elem WHERE dta_elem_phys_nm = tgt_dta_elem_nm
AND dom_key = tgt_dom AND sys_key = tgt_sys;
EXCEPTION
WHEN TOO_MANY_ROWS THEN
temp_var := 'Too many rows for Data Element Key value lookup for Target Data Element Physical Name:
'||tgt_dta_elem_nm|| ', Target Domain Key: '||tgt_dom||' and Target System Key: '||tgt_sys;
RAISE TOO_MANY_ROWS;
WHEN NO_DATA_FOUND THEN
temp_var := 'Data Element Key value lookup failed for Target Data Element Physical Name:
'||tgt_dta_elem_nm|| ', Target Domain Key: '||tgt_dom||' and Target System Key: '||tgt_sys;
RAISE NO_DATA_FOUND;
WHEN OTHERS THEN
temp_var := 'Unknown error in the Data Element Key value lookup for Target Data Element Physical
Name: '||tgt_dta_elem_nm|| ', Target Domain Key: '||tgt_dom||' and Target System Key: '||tgt_sys||' : '|| sqlerrm;
RAISE unknown_exception;
END;
BEGIN
SELECT MIN(cd_map_typ_cd) INTO map_code FROM cu_cdm_cd_map_typ WHERE cd_map_typ_desc = cd_map_typ_desc;
EXCEPTION
WHEN TOO_MANY_ROWS THEN
temp_var := 'Too many values for Code Map Type Code value lookup for Code Map Type Desc:
'||cd_map_typ_desc;
RAISE TOO_MANY_ROWS;
WHEN NO_DATA_FOUND THEN
temp_var := 'Code Map Type Code value lookup failed for Code Map Type Desc: '||cd_map_typ_desc;
RAISE NO_DATA_FOUND;
WHEN OTHERS THEN
temp_var := 'Unknown error in the Code Map Type Code value lookup for Code Map Type Desc:
'||cd_map_typ_desc||' : '|| sqlerrm;
RAISE unknown_exception;
END;
BEGIN
SELECT cu_cdm_src_cd_val_grp_key_sq.nextval INTO src_cd_val_seq FROM dual;
EXCEPTION
WHEN OTHERS THEN
temp_var := 'Error in generating the value for the sequence CU_CDM_SRC_CD_VAL_GRP_KEY_SQ'||' : '||
sqlerrm;
RAISE unknown_exception;
END;
BEGIN
SELECT cu_cdm_cd_val_key_sq.nextval INTO src_val_seq FROM dual;
EXCEPTION
WHEN OTHERS THEN
temp_var := 'Error in generating the value (source) for the sequence CU_CDM_CD_VAL_KEY_SQ'||' : '||
sqlerrm;
RAISE unknown_exception;
END;
BEGIN
SELECT cu_cdm_cd_val_key_sq.nextval INTO tgt_val_seq FROM dual;
EXCEPTION
WHEN OTHERS THEN
temp_var := 'Error in generating the value (target) for the sequence CU_CDM_CD_VAL_KEY_SQ'||' : '||
sqlerrm;
RAISE unknown_exception;
END;
BEGIN
SELECT cu_cdm_cd_val_map_key_sq.nextval INTO cd_val_map_key_sq FROM dual;
EXCEPTION
WHEN OTHERS THEN
temp_var := 'Error in generating the value for the sequence CU_CDM_CD_VAL_MAP_KEY_SQ'||' : '||
sqlerrm;
RAISE unknown_exception;
END;
BEGIN
BEGIN
INSERT INTO cu_cdm_cd_val_mstr(cd_val_key, cd_val_eff_dttm, dta_elem_key, cd_val_txt,
cd_val_desc, coode_val_term_dttm)
VALUES(src_val_seq, to_date(eff_dttm, 'MM-DD-YYYY'), src_elem, src_cd_val_txt,
src_cd_val_desc, to_date(term_dttm, 'MM-DD-YYYY'));
EXCEPTION
WHEN DUP_VAL_ON_INDEX THEN
temp_var := 'Primary Key Violation, key already exists in the table CU_CDM_CD_VAL_MSTR';
RAISE DUP_VAL_ON_INDEX;
WHEN OTHERS THEN
temp_var := 'Unknown error inserting into the table CU_CDM_CD_VAL_MSTR :'||' : '|| sqlerrm;
RAISE unknown_exception;
END;
BEGIN
INSERT INTO cu_cdm_cd_val_mstr(cd_val_key, cd_val_eff_dttm, dta_elem_key, cd_val_txt,
cd_val_desc, coode_val_term_dttm)
VALUES(tgt_val_seq, to_date(eff_dttm, 'MM-DD-YYYY'), tgt_elem, tgt_cd_val_txt,
tgt_cd_val_desc, to_date(term_dttm, 'MM-DD-YYYY'));
EXCEPTION
WHEN DUP_VAL_ON_INDEX THEN
temp_var := 'Primary Key Violation, key already exists in the table CU_CDM_CD_VAL_MSTR';
RAISE DUP_VAL_ON_INDEX;
WHEN OTHERS THEN
temp_var := 'UUnknown error inserting into the table CU_CDM_CD_VAL_MSTR'||' : '|| sqlerrm;
RAISE unknown_exception;
END;
BEGIN
INSERT INTO cu_cdm_src_cd_val_grp(src_cd_val_grp_key, src_cd_val_grp_eff_dttm,
src_cd_val_grp_desc, src_cd_val_term_dttm)
VALUES(src_cd_val_seq, to_date(eff_dttm, 'MM-DD-YYYY'), src_cd_val_grp_desc,
to_date(term_dttm, 'MM-DD-YYYY'));
EXCEPTION
WHEN DUP_VAL_ON_INDEX THEN
temp_var := 'Primary Key Violation, key already exists in the table CU_CDM_SRC_CD_VAL_GRP';
RAISE DUP_VAL_ON_INDEX;
WHEN OTHERS THEN
temp_var := 'Unknown error inserting into the table CU_CDM_SRC_CD_VAL_GRP'||' : '|| sqlerrm;
RAISE unknown_exception;
END;
BEGIN
INSERT INTO cu_cdm_cd_val_map(cd_val_map_key, cd_map_eff_dttm, cd_map_typ_cd,
cd_map_term_dttm, tgt_cd_val_key, tgt_cd_val_eff_dttm, src_cd_val_grp_key, src_cd_val_grp_eff_dttm)
VALUES(cd_val_map_key_sq, to_date(eff_dttm, 'MM-DD-YYYY'), map_code, to_date(term_dttm,
'MM-DD-YYYY'),
tgt_val_seq, to_date(eff_dttm, 'MM-DD-YYYY'), src_cd_val_seq, to_date(eff_dttm,
'MM-DD-YYYY'));
EXCEPTION
WHEN DUP_VAL_ON_INDEX THEN
temp_var := 'Primary Key Violation, key already exists in the table CU_CDM_CD_VAL_MAP';
RAISE DUP_VAL_ON_INDEX;
WHEN OTHERS THEN
temp_var := 'Unknown error inserting into the table CU_CDM_CD_VAL_MAP'||' : '|| sqlerrm;
RAISE unknown_exception;
END;
END;
COMMIT;
EXCEPTION
WHEN NO_DATA_FOUND THEN
errtext := temp_var ||' : '|| sqlerrm;
WHEN TOO_MANY_ROWS THEN
errtext := temp_var ||' : '|| sqlerrm;
WHEN DUP_VAL_ON_INDEX THEN
errtext := temp_var ||' : '|| sqlerrm;
WHEN invalidlength_exception THEN
errtext := temp_var;
WHEN unknown_exception THEN
errtext := temp_var ||' : '|| sqlerrm;
WHEN OTHERS THEN
errtext := sqlcode ||' : '|| sqlerrm;
END SP_Upload_CrossWalk;
Please help me in this regard
Regards
Deepak -
SQL Error: ORA-29913: error in executing ODCIEXTTABLEOPEN callout
Dear Friends,
I executed the following stmsts:
1)CREATE OR REPLACE DIRECTORY TEST_DIR AS 'd:\mydata';
2)GRANT READ, WRITE ON DIRECTORY TEST_DIR TO wonders_mumbai1;
3)CREATE TABLE ext_tab18 (
old_cust VARCHAR2(8),
new_cust VARCHAR2(8)
ORGANIZATION EXTERNAL (
TYPE oracle_loader
DEFAULT DIRECTORY TEST_DIR
ACCESS PARAMETERS (
RECORDS DELIMITED BY NEWLINE
BADFILE TEST_DIR:'bad-upload.bad'
LOGFILE TEST_DIR:'log_upload.log'
FIELDS TERMINATED BY ','
OPTIONALLY ENCLOSED BY '"'
MISSING FIELD VALUES ARE NULL
REJECT ROWS WITH ALL NULL FIELDS
(old_cust,new_cust))
LOCATION ('datafile1.csv')
REJECT LIMIT 0
NOMONITORING;
4)SELECT * FROM ext_tab18;
1 -3 execute successfully.
4 throws up the error:
Error starting at line 1 in command:
SELECT * FROM ext_tab18
Error report:
SQL Error: ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04063: unable to open log file log_upload.log
OS error The system cannot find the file specified.
ORA-06512: at "SYS.ORACLE_LOADER", line 19
29913. 00000 - "error in executing %s callout"
*Cause: The execution of the specified callout caused an error.
*Action: Examine the error messages take appropriate action.
What is to be done?Hi,
Yes if I put it on the server it works.
But if I put the file on the client in a shared folder and put the ip address as below:
10.97.140.59\mydata
it doesn't work.
So it seems that this will work if the file is on the server and not on any client.
If that be the case then it is a definite disadvantage.
thanks for ur reply. -
Error : ORA-28545: error diagnosed by Net8 when connecting to an agent
I try to connect my Oracle 11.2 database to SQL server 2012. I installed Oracle Gateway on a window 2012 R2 and followed Oracle Gateway configure instruction.
Here is the initdg4msql.ora
# HS init parameters
HS_FDS_CONNECT_INFO=ctmcsql2012.dot.state.co.us:1433/CTMCSQLSVR12/external
HS_FDS_TRACE_LEVEL=OFF
HS_FDS_TRANSACTION_MODEL=READ_ONLY
HS_DB_NAME=external
HS_DB_DOMAIN=ITS.DOT.STATE.CO.US
LISTENER.ORA
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME=PLSExtProc)
(ORACLE_HOME=D:\product\11.2.0\tg_1)
(PROGRAM=extproc)
(SID_DESC =
(SID_NAME=dg4msql)
(ORACLE_HOME=D:\product\11.2.0\tg_1)
(PROGRAM=dg4msql)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = CTMCSQL2012.dot.state.co.us)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
ADR_BASE_LISTENER = D:\product\11.2.0\tg_1
TNSNAMES.ORA
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
dg4msql.its.dot.state.co.us =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=ctmcsql2012.dot.state.co.us)(PORT=1521))
(CONNECT_DATA=
(SID=dg4msql))
(HS=OK)
lsnrctl status output:
PS D:\product\11.2.0\tg_1\bin> lsnrctl status LISTENER
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 23-APR-2015 14:26:54
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=CTMCSQL2012.dot.state.co.us)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
Start Date 21-APR-2015 16:00:11
Uptime 1 days 22 hr. 26 min. 42 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File D:\product\11.2.0\tg_1\network\admin\listener.ora
Listener Log File d:\product\11.2.0\tg_1\diag\tnslsnr\CTMCSQL2012\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=CTMCSQL2012.dot.state.co.us)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "dg4msql" has 1 instance(s).
Instance "dg4msql", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
I copied TNS entry to the database TNSNAMES.ora and created a DB link and get error:
CREATE DATABASE LINK "EXTERNAL.ITS.DOT.STATE.CO.US@CODOT"
CONNECT TO "CoDOT"
IDENTIFIED BY <PWD>
USING 'dg4msql.its.dot.state.co.us';
Link : "EXTERNAL.ITS.DOT.STATE.CO.US@CODOT"
Error : ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from EXTERNAL@CODOTCheck if this helps you - https://community.oracle.com/thread/466786
Pradeep -
SQL Error: ORA-29902: error in executing ODCIIndexStart() routine
I am running a SDO_RELATE operation on 2 geometries from 2 different tables. Spatial indexes are already created and the tables are also versioned.
Below is the spatial meta data for both the geometries in user_sdo_geom_metadata table:
DIMINFO is :
MDSYS.SDO_DIM_ELEMENT(MDSYS.SDO_DIM_ELEMENT(Easting,0,700000,0.001),MDSYS.SDO_DIM_ELEMENT(Northing,0,1300000,0.001),MDSYS.SDO_DIM_ELEMENT(Height,-100,2000,0.001))
SRID is 27700
When I use SDO_RELATE or ADO_ANYINTERACT on both the geometires, i am getting the below error.
Error report:
SQL Error: ORA-29902: error in executing ODCIIndexStart() routine
ORA-13243: specified operator is not supported for 3- or higher-dimensional R-tree
ORA-06512: at "MDSYS.SDO_INDEX_METHOD_10I", line 333
29902. 00000 - "error in executing ODCIIndexStart() routine"
*Cause: The execution of ODCIIndexStart routine caused an error.
*Action: Examine the error messages produced by the indextype code and
take appropriate action.
Could you please let me know what should be the root cause for this issue?Hi
Have you checked this posting?
Re: ORA-13243
Luc -
Error: ORA-12008: error in materialized view refresh path
Hello Dba' s
We are on 12.0.6 EBS with 10.2.0.5 DB on Sun solaris SPARC 64 bit.
We are getting below error while Refreshing Materialized View.
Start of log messages from FND_FILE
Error: ORA-12008: error in materialized view refresh path
ORA-00600: internal error code, arguments: [kcblasm_1], [103], [], [], [], [], [], [] Occured while Refreshing Materialized View
End of log messages from FND_FILE
Not sure how to proceed.We have just upgraded our database from 10.2.0.3 to 10.2.0.5.
Also we still have our test instance with 10.2.0.3 database ,there refreshing MV completed successfully.
Also refreshing through TOAD gives below error:-
BEGIN
DBMS_SNAPSHOT.REFRESH(
LIST => 'XXPPL.XXPPL_OPM_TRANSACTIONS_MV'
,PUSH_DEFERRED_RPC => TRUE
,REFRESH_AFTER_ERRORS => FALSE
,PURGE_OPTION => 1
,PARALLELISM => 0
,ATOMIC_REFRESH => TRUE
,NESTED => FALSE);
END;
Error at line 2
ORA-12008: error in materialized view refresh path
ORA-00600: internal error code, arguments: [kcblasm_1], [103], [], [], [], [], [], []
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2256
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2462
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2431
ORA-06512: at line 2
Please advice.
Thanks,
Edited by: user12209274 on Nov 23, 2010 2:10 AMthank you Justin,
I found in my alertDB.log this line ;
Mon Aug 20 03:00:54 2007
ORA-01555 caused by SQL statement below (SQL ID: 64a7sdbbvknta, Query Duration=1021 sec, SCN: 0x0004.4a145344):
Mon Aug 20 03:00:54 2007
INSERT /*+ BYPASS_RECURSIVE_CHECK */ INTO "MANAGEMENT"."MVIEW_COMPUTERS"("ID","WINVERSION","ANTIVIRUS","GUID","INSTALLDT","CONNECTION_TYPE","GROUPID
","QUOVACOUNTRY") SELECT "C"."ID","C"."WINVERSION","C"."ANTIVIRUS","C"."GUID","C"."INSTALLDT","C"."CONNECTIONTYPE","C"."GROUPID","C"."QUOVACOUNTRY"
FROM "MANAGEMENT"."COMPUTERS" "C"
So i execute this query to found the TUNED_UNDORETENTION value ;
SELECT *
FROM V$UNDOSTAT v
WHERE v.MAXQUERYID = '64a7sdbbvknta'
and i have this result :
BEGIN_TIME 20070820 02:53:42
END_TIME 20070820 03:03:42
UNDOTSN 1
UNDOBLKS 51242
TXNCOUNT 5012
MAXQUERYLEN 1060
MAXQUERYID 64a7sdbbvknta
MAXCONCURRENCY 21
UNXPSTEALCNT 0
UNXPBLKRELCNT 0
UNXPBLKREUCNT 0
EXPSTEALCNT 14
EXPBLKRELCNT 51392
EXPBLKREUCNT 0
SSOLDERRCNT 1
NOSPACEERRCNT 0
ACTIVEBLKS 606920
UNEXPIREDBLKS 19896
EXPIREDBLKS 612728
TUNED_UNDORETENTION 1841
I don't know exactly which value i should set my parameter?
Message was edited by:
HAGGAR -
SQL Error: ORA-12801: error signaled in parallel query server P007
Hi all
I am getting the following error when doing aggregation for a cube
<b>SQL Error: ORA-12801: error signaled in parallel query server P007.</b>Job is showing as finished but no aggregation is hapenning.
regards
KKfor ORA- 20000
check the note below it shows you have insufficient authorizations.
<b>Reason and Prerequisites</b>
You are using BW 7.00 with Support Package 07 or higher.
The BW module for the update statistics has been adjusted to SAPDBA or BRConnect (with regard to the heuristic, which is when, how and which statistics are created). To ensure that all table changes are taken into account, the relevant information must be flushed from the Oracle memory before the update statistics is carried out. For this purpose, the SAPCONN role (higher than ORA 10.2) or SAP SAP<sid> oder SAPR3 (ORA 10.1) requires additional authorizations that were not assigned up to now.
<b> Note 963760 - 'ORA-20000: Insufficient privileges' for creating statistics</b>
For Error -for SQL Error: ORA-01418: specified index does not exist
check note below-
<b>Note 337830 - BW: ORA-1418 in system log</b>
It seems that Index no longer exist which you are trying to delete.The 900 index, which exists on the F table only if the E table is partitioned, is deleted twice and on the second attempt it no longer exists.
<b>
Note 1003360 - BW fact tables: Deleting index from process chain terminates</b>
If it relates your error it requires corrections for SP-12.
Hope it Helps
Chetan
@CP..
Maybe you are looking for
-
SETTING UP HP 8600 TO APPLE AIRPORT EXTREME
I recently purchased an Apple Airport Extreme Base Station. Everything setup perfectly until I took on the task of connecting my HP 8600 All in One printer. I am hopelessly lost especially when it asked for a WEP or WPA key. Can anyone help or se
-
April 1. ( and no, this is not an April fools joke!! ) I uploaded the newest OS Maverick 10.9 a week ago. Since then my Epson WF 2540 printer scanner does not connect to the Mac. I have tried everything I know, and looked for solutions online, but s
-
Check boxes not responding correctly in form.
I've created a form in forms central. Then I used XI to edit more fields. I have 7 check boxes grouped together. They are required and have a min. of 1 and max of 7. They are allowed to check as many as they wish. But when they hit the submission of
-
Hi Hope someone can assist I'm struggling to download items on some websites on Safari and the forum on the website suggested I clear my Java cache. I can't find any references to Java under system Preferences or Utilities. There is also no option to
-
After spending time with Pages I have found somethings I feel are lacking and hope are included in future upgrades. Here are my short list of things I hope are in the next upgrade. Page Layout Feature: Have the ability to import multiple documents in