Error ORA-03113: end-of-file on communication channel in droppping a table
Good evening,
I am very new on Oracle and I have a problem with some tables. Without any reason, apparently, I can't drop some of my table. Oracle gives me this error:
ORA-03113: end-of-file on communication channel
and then close the connection of the user.
What I should have to do?
It is very important.
Thanks a lot
best regards
Anna Zanetti
Good morning, I still have the same problem, I can't drop a table from my database.
The message is again:
Re: Error ORA-03113: end-of-file on communication channel
The alert log file says:
Fri Nov 17 12:27:31 2006
Errors in file /usr/oracle/admin/oracledb/udump/oracledb_ora_4369.trc:
ORA-07445: exception encountered: core dump [0955C61F] [SIGSEGV] [Address not mapped to object] [0xC] [] []
and in file oracledb_ora_4369.trc there is:
Exception signal: 11 (SIGSEGV), code: 1 (Address not mapped to object), addr: 0xc, PC: [0x955c61f, 0955C61F]
Registers:
%eax: 0x00000000 %ebx: 0x00012d95 %ecx: 0x58301930
%edx: 0x00000000 %edi: 0x5830d9e8 %esi: 0x00000000
%esp: 0xbfffae1c %ebp: 0xbfffb060 %eip: 0x0955c61f
%efl: 0x00210282
(0x955c61f) movzw 0xc(%eax),%eax(0x955c623) cmp $30,%eax
(0x955c626) jle 0x955c63e
(0x955c628) xor %edx,%edx
(0x955c62a) push %edx
*** 2006-11-17 12:27:31.658
ksedmp: internal or fatal error
ORA-07445: exception encountered: core dump [0955C61F] [SIGSEGV] [Address not mapped to object] [0xC] [] []
Current SQL statement for this session:
drop table fiumiforjoin
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)
08856247 call 0885776A 1 ? 0 ? 1 ? 1 ? 0 ? 0 ?
08290320 call 0885605A 3 ? 0 ? 0 ? 0 ? 0 ? 0 ?
0955C61F signal 08290320 B ? BFFFAAB0 ? BFFFAB30 ?
0955D6BE call 0955C61F 5830F01C ? 0 ? FFFFFFFF ? 0 ?
1 ? 5830F01C ?
08DD1EEB call 0955CC22 BFFFB394 ? 0 ? 0 ? BFFFB348 ?
58EAB2B0 ? C ?
09434EF3 call 08DD1A28 BF2A8C4 ? BFFFC0C0 ?
BFFFC0C0 ? 4 ? B6AB0300 ?
B6ABC2E0 ?
094106E0 call 094326D4 4 ? 0 ? BFFFC0C0 ?
093D7BB5 call 0940FEF8 3 ? E ? BFFFC1F8 ? A4 ?
093D630C call 093D7AC4 BFFFCDF0 ? BFFFCD08 ? 17 ?
1 ? 0 ? A4 ?
08293DE6 call 0850FFFF 5E ? 14 ? BFFFCDEC ?
0A1ED44D call 08293DE6 5E ? 14 ? BFFFCDEC ? 0 ?
08292122 call 0A1ECAE4 BF2A8C0 ? 5E ? BFFFCDEC ? 0 ?
BFFFD6E8 ? BFFFD6E4 ?
0941F190 call 0829193C 0 ? 0 ? BF2A8C0 ? BF83090 ?
F1 ? 0 ?
08293DE6 call 0850FFFF 3C ? 4 ? BFFFEB08 ?
08291238 call 082937A8 3C ? 4 ? BFFFEB08 ? 0 ?
0828F403 call 08291012 3C ? 4 ? BFFFEB08 ?
08274A3D call 0828F39C BFFFEAEC ? 3C ? 4 ?
BFFFEB08 ? B6CC017C ?
B6C1A17C ?
__libc_start_main() call 08274A3D 2 ? BFFFEBA4 ? BFFFEBB0 ? 0 ?
+218 B6C1C898 ? B7600020 ?
Any idea of what I have to do?
Thanks for your help..
Best Regards
Anna Zanetti
Similar Messages
-
Getting error "ORA-03113: end-of-file on communication channel"
HI ,
When Iam trying to compile a procedure in SQL *PLUS ,iam getting the following error :
ORA-03113: end-of-file on communication channel and the connection is getting lost .There is no issue with the code .
When i compile the same procedure in sql developer ,connection is getting lost and getting error
"Connection Closed
Vendor Code 17008"
Please help me to resolve the issue .
Thanks in advance ...Hi
Here is the code which is not getting compiled and is giving the above said error
CREATE OR REPLACE PROCEDURE SP_Upload_CrossWalk
(src_dom_nm IN VARCHAR2, src_sys_nm IN VARCHAR2, src_dta_elem_nm IN VARCHAR2, src_cd_val_txt IN VARCHAR2,
src_cd_val_desc IN VARCHAR2,src_cd_val_grp_desc IN VARCHAR2, tgt_dom_nm IN VARCHAR2, tgt_sys_nm IN VARCHAR2,
tgt_dta_elem_nm IN VARCHAR2, tgt_cd_val_txt IN VARCHAR2, tgt_cd_val_desc IN VARCHAR2,cd_map_typ_desc IN VARCHAR2,
eff_dttm IN VARCHAR2, term_dttm IN VARCHAR2, errtext OUT VARCHAR2)
IS
src_dom NUMBER;
src_key NUMBER;
src_elem NUMBER;
tgt_dom NUMBER;
tgt_sys NUMBER;
tgt_elem NUMBER;
src_val_seq NUMBER;
tgt_val_seq NUMBER;
src_cd_val_seq NUMBER;
cd_val_map_key_sq NUMBER;
temp_var VARCHAR2(500);
var_len NUMBER;
map_code CHAR(1);
invalidlength_exception EXCEPTION;
unknown_exception Exception;
BEGIN
var_len := LENGTH(src_cd_val_txt);
IF var_len > 20 THEN
temp_var := 'Length of Source Code Value Text Name is more than 20 characters';
RAISE invalidlength_exception;
END IF;
var_len := LENGTH(src_cd_val_desc);
IF var_len > 255 THEN
temp_var := 'Length of Code Value Desc is more than 255 characters';
RAISE invalidlength_exception;
END IF;
var_len := LENGTH(tgt_cd_val_txt);
IF var_len > 20 THEN
temp_var := 'Length of Target Code Value Text Name is more than 20 characters';
RAISE invalidlength_exception;
END IF;
var_len := LENGTH(tgt_cd_val_desc);
IF var_len > 255 THEN
temp_var := 'Length of Target Code Value Desc is more than 255 characters';
RAISE invalidlength_exception;
END IF;
var_len := LENGTH(src_cd_val_grp_desc);
IF var_len > 255 THEN
temp_var := 'Length of Code Value Group Desc is more than 255 characters';
RAISE invalidlength_exception;
END IF;
BEGIN
SELECT dom_key INTO src_dom FROM cu_cdm_dom WHERE dom_nm = src_dom_nm;
EXCEPTION
WHEN TOO_MANY_ROWS THEN
temp_var := 'Too many rows for Domain Key value lookup for Source Domain Name: '||src_dom_nm;
RAISE TOO_MANY_ROWS;
WHEN NO_DATA_FOUND THEN
temp_var := 'Domain Key value lookup failed for Source Domain Name: '||src_dom_nm;
RAISE NO_DATA_FOUND;
WHEN OTHERS THEN
temp_var := 'Unknown error in the Domain Key value lookup for Source Domain Name: '||src_dom_nm||' :
'|| sqlerrm;
RAISE unknown_exception;
END;
BEGIN
SELECT sys_key INTO src_key FROM cu_cdm_sys WHERE sys_nm = src_sys_nm;
EXCEPTION
WHEN TOO_MANY_ROWS THEN
temp_var := 'Too many rows for System Key value lookup for Source System Name: '||src_sys_nm;
RAISE TOO_MANY_ROWS;
WHEN NO_DATA_FOUND THEN
temp_var := 'System Key value lookup failed for Source System Name: '||src_sys_nm;
RAISE NO_DATA_FOUND;
WHEN OTHERS THEN
temp_var := 'Unknown error in the System Key value lookup for Source System Name: '||src_sys_nm||' :
'|| sqlerrm;
RAISE unknown_exception;
END;
BEGIN
SELECT dta_elem_key INTO src_elem FROM cu_cdm_dta_elem WHERE dta_elem_phys_nm = src_dta_elem_nm
AND dom_key = src_dom AND sys_key = src_key;
EXCEPTION
WHEN TOO_MANY_ROWS THEN
temp_var := 'Too many rows for Data Element Key value lookup for Source Data Element Physical Name:
'||src_dta_elem_nm|| ', Source Domain Key: '||src_dom||' and Source System Key: '||src_key;
RAISE TOO_MANY_ROWS;
WHEN NO_DATA_FOUND THEN
temp_var := 'Data Element Key value lookup failed for Source Data Element Physical Name:
'||src_dta_elem_nm|| ', Source Domain Key: '||src_dom||' and Source System Key: '||src_key;
RAISE NO_DATA_FOUND;
WHEN OTHERS THEN
temp_var := 'Unknown error in the Data Element Key value lookup for Source Data Element Physical
Name: '||src_dta_elem_nm|| ', Source Domain Key: '||src_dom||' and Source System Key: '||src_key||' : '|| sqlerrm;
RAISE unknown_exception;
END;
BEGIN
SELECT dom_key INTO tgt_dom FROM cu_cdm_dom WHERE dom_nm = tgt_dom_nm;
EXCEPTION
WHEN TOO_MANY_ROWS THEN
temp_var := 'Too many rows for Domain Key value lookup for Target Domain Name: '||tgt_dom_nm;
RAISE TOO_MANY_ROWS;
WHEN NO_DATA_FOUND THEN
temp_var := 'Domain Key value lookup failed for Target Domain Name: '||tgt_dom_nm;
RAISE NO_DATA_FOUND;
WHEN OTHERS THEN
temp_var := 'Unknown error in the Domain Key value lookup for Target Domain Name: '||tgt_dom_nm||' :
'|| sqlerrm;
RAISE unknown_exception;
END;
BEGIN
SELECT sys_key INTO tgt_sys FROM cu_cdm_sys WHERE sys_nm = tgt_sys_nm;
EXCEPTION
WHEN TOO_MANY_ROWS THEN
temp_var := 'Too may rows for System Key value lookup for Target System Name: '||tgt_sys_nm;
RAISE TOO_MANY_ROWS;
WHEN NO_DATA_FOUND THEN
temp_var := 'System Key value lookup failed for Target System Name: '||tgt_sys_nm;
RAISE NO_DATA_FOUND;
WHEN OTHERS THEN
temp_var := 'Unknown error in the System Key value lookup for Target System Name: '||tgt_sys_nm||' :
'|| sqlerrm;
RAISE unknown_exception;
END;
BEGIN
SELECT dta_elem_key INTO tgt_elem FROM cu_cdm_dta_elem WHERE dta_elem_phys_nm = tgt_dta_elem_nm
AND dom_key = tgt_dom AND sys_key = tgt_sys;
EXCEPTION
WHEN TOO_MANY_ROWS THEN
temp_var := 'Too many rows for Data Element Key value lookup for Target Data Element Physical Name:
'||tgt_dta_elem_nm|| ', Target Domain Key: '||tgt_dom||' and Target System Key: '||tgt_sys;
RAISE TOO_MANY_ROWS;
WHEN NO_DATA_FOUND THEN
temp_var := 'Data Element Key value lookup failed for Target Data Element Physical Name:
'||tgt_dta_elem_nm|| ', Target Domain Key: '||tgt_dom||' and Target System Key: '||tgt_sys;
RAISE NO_DATA_FOUND;
WHEN OTHERS THEN
temp_var := 'Unknown error in the Data Element Key value lookup for Target Data Element Physical
Name: '||tgt_dta_elem_nm|| ', Target Domain Key: '||tgt_dom||' and Target System Key: '||tgt_sys||' : '|| sqlerrm;
RAISE unknown_exception;
END;
BEGIN
SELECT MIN(cd_map_typ_cd) INTO map_code FROM cu_cdm_cd_map_typ WHERE cd_map_typ_desc = cd_map_typ_desc;
EXCEPTION
WHEN TOO_MANY_ROWS THEN
temp_var := 'Too many values for Code Map Type Code value lookup for Code Map Type Desc:
'||cd_map_typ_desc;
RAISE TOO_MANY_ROWS;
WHEN NO_DATA_FOUND THEN
temp_var := 'Code Map Type Code value lookup failed for Code Map Type Desc: '||cd_map_typ_desc;
RAISE NO_DATA_FOUND;
WHEN OTHERS THEN
temp_var := 'Unknown error in the Code Map Type Code value lookup for Code Map Type Desc:
'||cd_map_typ_desc||' : '|| sqlerrm;
RAISE unknown_exception;
END;
BEGIN
SELECT cu_cdm_src_cd_val_grp_key_sq.nextval INTO src_cd_val_seq FROM dual;
EXCEPTION
WHEN OTHERS THEN
temp_var := 'Error in generating the value for the sequence CU_CDM_SRC_CD_VAL_GRP_KEY_SQ'||' : '||
sqlerrm;
RAISE unknown_exception;
END;
BEGIN
SELECT cu_cdm_cd_val_key_sq.nextval INTO src_val_seq FROM dual;
EXCEPTION
WHEN OTHERS THEN
temp_var := 'Error in generating the value (source) for the sequence CU_CDM_CD_VAL_KEY_SQ'||' : '||
sqlerrm;
RAISE unknown_exception;
END;
BEGIN
SELECT cu_cdm_cd_val_key_sq.nextval INTO tgt_val_seq FROM dual;
EXCEPTION
WHEN OTHERS THEN
temp_var := 'Error in generating the value (target) for the sequence CU_CDM_CD_VAL_KEY_SQ'||' : '||
sqlerrm;
RAISE unknown_exception;
END;
BEGIN
SELECT cu_cdm_cd_val_map_key_sq.nextval INTO cd_val_map_key_sq FROM dual;
EXCEPTION
WHEN OTHERS THEN
temp_var := 'Error in generating the value for the sequence CU_CDM_CD_VAL_MAP_KEY_SQ'||' : '||
sqlerrm;
RAISE unknown_exception;
END;
BEGIN
BEGIN
INSERT INTO cu_cdm_cd_val_mstr(cd_val_key, cd_val_eff_dttm, dta_elem_key, cd_val_txt,
cd_val_desc, coode_val_term_dttm)
VALUES(src_val_seq, to_date(eff_dttm, 'MM-DD-YYYY'), src_elem, src_cd_val_txt,
src_cd_val_desc, to_date(term_dttm, 'MM-DD-YYYY'));
EXCEPTION
WHEN DUP_VAL_ON_INDEX THEN
temp_var := 'Primary Key Violation, key already exists in the table CU_CDM_CD_VAL_MSTR';
RAISE DUP_VAL_ON_INDEX;
WHEN OTHERS THEN
temp_var := 'Unknown error inserting into the table CU_CDM_CD_VAL_MSTR :'||' : '|| sqlerrm;
RAISE unknown_exception;
END;
BEGIN
INSERT INTO cu_cdm_cd_val_mstr(cd_val_key, cd_val_eff_dttm, dta_elem_key, cd_val_txt,
cd_val_desc, coode_val_term_dttm)
VALUES(tgt_val_seq, to_date(eff_dttm, 'MM-DD-YYYY'), tgt_elem, tgt_cd_val_txt,
tgt_cd_val_desc, to_date(term_dttm, 'MM-DD-YYYY'));
EXCEPTION
WHEN DUP_VAL_ON_INDEX THEN
temp_var := 'Primary Key Violation, key already exists in the table CU_CDM_CD_VAL_MSTR';
RAISE DUP_VAL_ON_INDEX;
WHEN OTHERS THEN
temp_var := 'UUnknown error inserting into the table CU_CDM_CD_VAL_MSTR'||' : '|| sqlerrm;
RAISE unknown_exception;
END;
BEGIN
INSERT INTO cu_cdm_src_cd_val_grp(src_cd_val_grp_key, src_cd_val_grp_eff_dttm,
src_cd_val_grp_desc, src_cd_val_term_dttm)
VALUES(src_cd_val_seq, to_date(eff_dttm, 'MM-DD-YYYY'), src_cd_val_grp_desc,
to_date(term_dttm, 'MM-DD-YYYY'));
EXCEPTION
WHEN DUP_VAL_ON_INDEX THEN
temp_var := 'Primary Key Violation, key already exists in the table CU_CDM_SRC_CD_VAL_GRP';
RAISE DUP_VAL_ON_INDEX;
WHEN OTHERS THEN
temp_var := 'Unknown error inserting into the table CU_CDM_SRC_CD_VAL_GRP'||' : '|| sqlerrm;
RAISE unknown_exception;
END;
BEGIN
INSERT INTO cu_cdm_cd_val_map(cd_val_map_key, cd_map_eff_dttm, cd_map_typ_cd,
cd_map_term_dttm, tgt_cd_val_key, tgt_cd_val_eff_dttm, src_cd_val_grp_key, src_cd_val_grp_eff_dttm)
VALUES(cd_val_map_key_sq, to_date(eff_dttm, 'MM-DD-YYYY'), map_code, to_date(term_dttm,
'MM-DD-YYYY'),
tgt_val_seq, to_date(eff_dttm, 'MM-DD-YYYY'), src_cd_val_seq, to_date(eff_dttm,
'MM-DD-YYYY'));
EXCEPTION
WHEN DUP_VAL_ON_INDEX THEN
temp_var := 'Primary Key Violation, key already exists in the table CU_CDM_CD_VAL_MAP';
RAISE DUP_VAL_ON_INDEX;
WHEN OTHERS THEN
temp_var := 'Unknown error inserting into the table CU_CDM_CD_VAL_MAP'||' : '|| sqlerrm;
RAISE unknown_exception;
END;
END;
COMMIT;
EXCEPTION
WHEN NO_DATA_FOUND THEN
errtext := temp_var ||' : '|| sqlerrm;
WHEN TOO_MANY_ROWS THEN
errtext := temp_var ||' : '|| sqlerrm;
WHEN DUP_VAL_ON_INDEX THEN
errtext := temp_var ||' : '|| sqlerrm;
WHEN invalidlength_exception THEN
errtext := temp_var;
WHEN unknown_exception THEN
errtext := temp_var ||' : '|| sqlerrm;
WHEN OTHERS THEN
errtext := sqlcode ||' : '|| sqlerrm;
END SP_Upload_CrossWalk;
Please help me in this regard
Regards
Deepak -
Error ORA-03113: end-of-file on communication channel (while starting db)
Hello everybody! :-)
Looks like a need help with Oracle 11gr2 (RHEL 6 x64). Faced with a problem while starting database:
sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Fri Dec 7 01:43:45 2012
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 2538741760 bytes
Fixed Size 2216024 bytes
Variable Size 1828720552 bytes
Database Buffers 687865856 bytes
Redo Buffers 19939328 bytes
Database mounted.
ORA-03113: end-of-file on communication channel
Process ID: 6601
Session ID: 575 Serial number: 5
This is logfile (/u01/app/oracle/diag/rdbms/orcldocs1/orcldocs1/alert/log.xml):
<msg time='2012-12-07T01:52:22.363+04:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='localhost.localdomain' host_addr='127.0.0.1' module='[email protected] (TNS V1-V3)'
pid='6881'>
<txt>Errors in file /u01/app/oracle/diag/rdbms/orcldocs1/orcldocs1/trace/orcldocs1_ora_6881.trc:
ORA-19809: limit exceeded for recovery files
ORA-19804: cannot reclaim 28496896 bytes disk space from 5218762752 limit
</txt>
</msg>
<msg time='2012-12-07T01:52:22.363+04:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='localhost.localdomain' host_addr='127.0.0.1' module='[email protected] (TNS V1-V3)'
pid='6881'>
<txt>ARCH: Error 19809 Creating archive log file to '/u01/app/oracle/flash_recovery_area/ORCLDOCS1/archivelog/2012_12_07/o1_mf_1_249_%u_.arc'
</txt>
</msg>
<msg time='2012-12-07T01:52:22.368+04:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='localhost.localdomain' host_addr='127.0.0.1' module='[email protected] (TNS V1-V3)'
pid='6881'>
<txt>Errors in file /u01/app/oracle/diag/rdbms/orcldocs1/orcldocs1/trace/orcldocs1_ora_6881.trc:
ORA-16038: log 3 sequence# 249 cannot be archived
ORA-19809: limit exceeded for recovery files
ORA-00312: online log 3 thread 1: '/u01/app/oracle/oradata/orcldocs1/redo03.log'
</txt>
</msg>
<msg time='2012-12-07T01:52:22.368+04:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='localhost.localdomain' host_addr='127.0.0.1' module='[email protected] (TNS V1-V3)'
pid='6881'>
<txt>USER (ospid: 6881): terminating the instance due to error 16038
</txt>
</msg>
<msg time='2012-12-07T01:52:23.540+04:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
host_id='localhost.localdomain' host_addr='127.0.0.1' module='[email protected] (TNS V1-V3)'
pid='6881'>
<txt>Instance terminated by USER, pid = 6881
</txt>
</msg>
How can I resolve it, please advice. Thank you.
Edited by: user9001403 on 06.12.2012 5:58Hi,
Looks like your archivelog space is exhausted. Increase the db_recovery_file_dest_size size and check.
SQL> show parameter db_recovery
NAME TYPE VALUE
db_recovery_file_dest string /oracle/flash_recovery_area
db_recovery_file_dest_size big integer 3882MRegards,
Anand. -
Oracle error ORA-03113: end-of-file on communication channel
Dear Support
I am getting "ORA-03113: end-of-file on communication channel" when I am trying to access my application.
The current setup is following
- two node Sun Cluster with node name as sep1n1 and sep2n2
- running Oracle RAC (oracle database 10g) with instance name as ADVFRW1 and ADVFRW2
Please see attached oracle trace file which was generated at the time of problem.
Can you please help me to know what can be the reason of this oracle error/crash?
Thanks
Regards
VSI don't see any Trace file.
Network Problems?
Are the databases up and running? -
FULL JOIN Error - (ORA-03113: end-of-file on communication channel)
Hello,
well my following query is running fine, no errors but not showing join records from table B and E.
Query is as following:
SELECT D.EMPLOYEE_ID, F.EMP_NAME,
F.COMPANY_ID, F.COMP_NAME, F.BRANCH_ID, F.BR_NAME,
TO_CHAR(F.BIRTH_DATE,'DD/MM/YYYY') DOB,
((NVL(A.PF_OWN,0) + NVL(A.PF_COMP,0) + NVL(A.PROF_OWN,0) + NVL(A.PROF_COMP,0) + NVL(B.PROF_OWN,0) +
NVL(B.PROF_COMP,0) + NVL(B.TOT_PF_OWN,0) + NVL(B.TOT_PF_COMP,0) +
NVL(D.SAL_PF_OWN,0) + NVL(D.SAL_PF_COMP,0) -
(NVL(E.REV_PF_OWN,0) + NVL(E.REV_PF_COMP,0) + NVL(C.WD_PF_OWN,0) + NVL(C.WD_PF_COMP,0) +
NVL(C.WD_PROF_OWN,0) + NVL(C.WD_PROF_COMP,0)))) PF_BALANCE
FROM
(SELECT EMPLOYEE_ID, SUM(PF_OWN) SAL_PF_OWN, SUM(PF_COMP) SAL_PF_COMP
FROM EMPLOYEE.EMP_SAL_DETAILS
WHERE SAL_DATE >= (SELECT MAX(AS_ON_DATE) FROM EMPLOYEE.EMP_PF_OPBALS WHERE AS_ON_DATE <= '01-DEC-06')
AND SAL_DATE <= '01-DEC-06'
GROUP BY EMPLOYEE_ID) D
LEFT JOIN
(SELECT EMPLOYEE_ID, PF_OWN, PF_COMP, PROF_OWN, PROF_COMP
FROM EMPLOYEE.EMP_PF_OPBALS
WHERE AS_ON_DATE IN (SELECT MAX(AS_ON_DATE) FROM EMPLOYEE.EMP_PF_OPBALS WHERE AS_ON_DATE <= '01-DEC-06')) A
ON (D.EMPLOYEE_ID = A.EMPLOYEE_ID)
LEFT JOIN
(SELECT EMPLOYEE_ID, SUM(TOT_PF_OWN) TOT_PF_OWN, SUM(TOT_PF_COMP) TOT_PF_COMP, SUM(PROF_OWN) PROF_OWN, SUM(PROF_COMP) PROF_COMP
FROM EMPLOYEE.EMP_PF_PROF_DETAILS WHERE END_DATE >= (SELECT MAX(AS_ON_DATE) FROM EMPLOYEE.EMP_PF_OPBALS WHERE AS_ON_DATE <= '01-DEC-06')
GROUP BY EMPLOYEE_ID) B
ON (D.EMPLOYEE_ID = B.EMPLOYEE_ID)
LEFT JOIN
(SELECT EMPLOYEE_ID, SUM(PF_OWN) WD_PF_OWN, SUM(PF_COMP) WD_PF_COMP, SUM(PROF_OWN) WD_PROF_OWN, SUM(PROF_COMP) WD_PROF_COMP
FROM EMPLOYEE.EMP_PF_WITHDRAWALS WHERE PF_WDRAW_DATE >= (SELECT MAX(AS_ON_DATE) FROM EMPLOYEE.EMP_PF_OPBALS WHERE AS_ON_DATE <= '01-DEC-06')
GROUP BY EMPLOYEE_ID) C
ON (D.EMPLOYEE_ID = C.EMPLOYEE_ID)
LEFT JOIN
(SELECT EMPLOYEE_ID, SUM(PF_OWN) REV_PF_OWN, SUM(PF_COMP) REV_PF_COMP
FROM EMPLOYEE.EMP_SAL_REVERSALS
WHERE SAL_DATE >= (SELECT MAX(AS_ON_DATE) FROM EMPLOYEE.EMP_PF_OPBALS WHERE AS_ON_DATE >= '01-DEC-06')
AND SAL_DATE <= '01-DEC-06'
GROUP BY EMPLOYEE_ID) E
ON (D.EMPLOYEE_ID = E.EMPLOYEE_ID)
LEFT JOIN
(SELECT EMPLOYEE_ID, COMPANY_ID, COMP_NAME, BRANCH_ID, BR_NAME, EMP_NAME, BIRTH_DATE, CONF_DATE FROM V_SEL_SYS_EMP) F
ON (D.EMPLOYEE_ID = F.EMPLOYEE_ID)
ORDER BY D.EMPLOYEE_ID
And when i try to full join my tables and replace LEFT JOIN with FULL OUTER JOIN following errors accurs:
(ORA-03113: end-of-file on communication channel) and oracle gets disconnect.
Query will only show records its tables are FULL JOINED.
Please help what is the solution. Its very urgent also.
I am thankful to you.
Regards,
Imran> And when i try to full join my tables and replace LEFT JOIN with FULL OUTER
JOIN following errors accurs:
(ORA-03113: end-of-file on communication channel) and oracle gets disconnect.
This is not an error, but a symptom of an error. An ORA-03113 results when the Oracle Server Process that services your client, terminates abnormally. When that server process terminates, the connection (TCP socket) to your client is torn down - without your client knowing about it.
The ORA-03113 is generated by your client's Oracle driver when your client suddenly discovers that the connection to the Oracle Server Process is no longer there.
So why does the Server Process terminate abnormally? Usually due to an internal error (an ORA-600 and/or an ORA-7445).
These errors results in:
- error messages to be generated in the Oracle instance's alert log
- a trace file generated by the server process that includes stack and memory dumps
You need to determine what these errors are, and the use the ORA-600/ORA-7445 Troubleshooter (Metalink Note 153788.1) on [url http://metalink.oracle.com]Metalink to troubleshoot the error, determine whether it is a bug, if there is a patch or a workaround available, etc.
> Please help what is the solution. Its very urgent also.
I do not mind helping out where I can. But I do have a problem with people claiming there problem is urgent, and deserves quicker/better attention that other peoples' problems around here,
If your problem is urgent then you are in the wrong place. I do not get paid to solve urgent problems quickly. I and others, spend our free time providing assistance. You cannot demand any kind of urgent attention from any of us.
If you like urgent and special attention, use Oracle Support. -
Repository Gateway error ORA-03113: end-of-file on communication channel
Hello -
We have 4 Oracle Portals installed at my company which are all mirror installs of each other, but one server constantly has issues. About once a week I get an error in the <OraHome>\j2ee\OC4J_Portal\application-deployments\portal\OC4J_Portal_default_island_1\application.log
11/03/20 06:01:51 portal: [module=PortalServlet, ecid=2766352842090,1] ERROR: Repository Gateway error: Database Error: ORA=3113 ORA-03113: end-of-file on communication channel
11/03/20 06:01:51 portal: [module=PortalServlet, ecid=2766352842090,1] ERROR: oracle.webdb.repository.service.RepositoryServiceException: Portal session creation failed.
11/03/20 06:02:44 portal: [module=PortalServlet, ecid=3917404131701,1] ERROR: Repository Gateway error: Database Error: ORA=3114 ORA-03114: not connected to ORACLE
11/03/20 06:02:44 portal: [module=PortalServlet, ecid=3917404131701,1] ERROR: oracle.webdb.repository.service.RepositoryServiceException: Portal session creation failed.
11/03/20 06:07:44 portal: [module=PortalServlet, ecid=6271046517224,1] ERROR: Repository Gateway error: Database Error: ORA=3114 ORA-03114: not connected to ORACLE
11/03/20 06:07:44 portal: [module=PortalServlet, ecid=6271046517224,1] ERROR: oracle.webdb.repository.service.RepositoryServiceException: Portal session creation failed.
Once this error occurs, a reboot of the server is needed to restore functionality. The Portal server is a 32-bit Windows Server 2003 and the database is Oracle 10g residing on a Unix server. Can anyone help me troubleshoot this?Hello -
We have 4 Oracle Portals installed at my company which are all mirror installs of each other, but one server constantly has issues. About once a week I get an error in the <OraHome>\j2ee\OC4J_Portal\application-deployments\portal\OC4J_Portal_default_island_1\application.log
11/03/20 06:01:51 portal: [module=PortalServlet, ecid=2766352842090,1] ERROR: Repository Gateway error: Database Error: ORA=3113 ORA-03113: end-of-file on communication channel
11/03/20 06:01:51 portal: [module=PortalServlet, ecid=2766352842090,1] ERROR: oracle.webdb.repository.service.RepositoryServiceException: Portal session creation failed.
11/03/20 06:02:44 portal: [module=PortalServlet, ecid=3917404131701,1] ERROR: Repository Gateway error: Database Error: ORA=3114 ORA-03114: not connected to ORACLE
11/03/20 06:02:44 portal: [module=PortalServlet, ecid=3917404131701,1] ERROR: oracle.webdb.repository.service.RepositoryServiceException: Portal session creation failed.
11/03/20 06:07:44 portal: [module=PortalServlet, ecid=6271046517224,1] ERROR: Repository Gateway error: Database Error: ORA=3114 ORA-03114: not connected to ORACLE
11/03/20 06:07:44 portal: [module=PortalServlet, ecid=6271046517224,1] ERROR: oracle.webdb.repository.service.RepositoryServiceException: Portal session creation failed.
Once this error occurs, a reboot of the server is needed to restore functionality. The Portal server is a 32-bit Windows Server 2003 and the database is Oracle 10g residing on a Unix server. Can anyone help me troubleshoot this? -
SQL startup Error:ORA-03113: end-of-file on communication channel
Hello All,
Oracle 11g 11.2.0.2 Expression Edition
I made the number of processes to 1 by issuing the below command.
SQL> alter system set processes = 1;
SQL>shutdown immediateI am getting the below error when I issued startup command.
SQL> startup;
ORA-03113: end-of-file on communication channelalert log:
Fri Dec 28 14:09:24 2012
PMON started with pid=2, OS id=2984
Fri Dec 28 14:09:24 2012
PSP0 started with pid=3, OS id=5788
Fri Dec 28 14:09:25 2012
ORA-00020: No more process state objects available
ORA-20 errors will not be written to the alert log for
the next minute. Please look at trace files to see all
the ORA-20 errors.
Process GEN0 submission failed with error = 20
USER (ospid: 4780): terminating the instance due to error 444
Fri Dec 28 14:09:25 2012
VKTM started with pid=4, OS id=1676 at elevated priority
Instance terminated by USER, pid = 4780How to startup my database again?alert log:
Starting up:
Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production.
Using parameter settings in server-side pfile C:\ORACLEXE\APP\ORACLE\PRODUCT\11.2.0\SERVER\DATABASE\INITXE.ORA
System parameters with non-default values:
processes = 6
sessions = 32
spfile = "C:\ORACLEXE\APP\ORACLE\PRODUCT\11.2.0\SERVER\DBS\SPFILEXE.ORA"
memory_target = 1G
control_files = "C:\ORACLEXE\APP\ORACLE\ORADATA\XE\CONTROL.DBF"
compatible = "11.2.0.0.0"
db_recovery_file_dest = "C:\oraclexe\app\oracle\fast_recovery_area"
db_recovery_file_dest_size= 10G
undo_management = "AUTO"
undo_tablespace = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
dispatchers = "(PROTOCOL=TCP) (SERVICE=XEXDB)"
shared_servers = 4
job_queue_processes = 4
audit_file_dest = "C:\ORACLEXE\APP\ORACLE\ADMIN\XE\ADUMP"
db_name = "XE"
open_cursors = 300
diagnostic_dest = "C:\ORACLEXE\APP\ORACLE"
Fri Dec 28 14:06:59 2012
PMON started with pid=2, OS id=2248
Fri Dec 28 14:06:59 2012
PSP0 started with pid=3, OS id=3700
Fri Dec 28 14:07:00 2012
VKTM started with pid=4, OS id=4492 at elevated priority
Fri Dec 28 14:07:00 2012
ORA-00020: No more process state objects available
VKTM running at (10)millisec precision with DBRM quantum (100)ms
ORA-20 errors will not be written to the alert log for
the next minute. Please look at trace files to see all
the ORA-20 errors.
Process GEN0 submission failed with error = 20
USER (ospid: 6076): terminating the instance due to error 444
Instance terminated by USER, pid = 6076
Fri Dec 28 14:09:07 2012
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_1 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up:
Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production.
Using parameter settings in server-side pfile C:\ORACLEXE\APP\ORACLE\PRODUCT\11.2.0\SERVER\DATABASE\INITXE.ORA
System parameters with non-default values:
processes = 6
sessions = 32
spfile = "C:\ORACLEXE\APP\ORACLE\PRODUCT\11.2.0\SERVER\DBS\SPFILEXE.ORA"
memory_target = 1G
control_files = "C:\ORACLEXE\APP\ORACLE\ORADATA\XE\CONTROL.DBF"
compatible = "11.2.0.0.0"
db_recovery_file_dest = "C:\oraclexe\app\oracle\fast_recovery_area"
db_recovery_file_dest_size= 10G
undo_management = "AUTO"
undo_tablespace = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
dispatchers = "(PROTOCOL=TCP) (SERVICE=XEXDB)"
shared_servers = 4
job_queue_processes = 4
audit_file_dest = "C:\ORACLEXE\APP\ORACLE\ADMIN\XE\ADUMP"
db_name = "XE"
open_cursors = 300
diagnostic_dest = "C:\ORACLEXE\APP\ORACLE"
Fri Dec 28 14:09:24 2012
PMON started with pid=2, OS id=2984
Fri Dec 28 14:09:24 2012
PSP0 started with pid=3, OS id=5788
Fri Dec 28 14:09:25 2012
ORA-00020: No more process state objects available
ORA-20 errors will not be written to the alert log for
the next minute. Please look at trace files to see all
the ORA-20 errors.
Process GEN0 submission failed with error = 20
USER (ospid: 4780): terminating the instance due to error 444
Fri Dec 28 14:09:25 2012
VKTM started with pid=4, OS id=1676 at elevated priority
Instance terminated by USER, pid = 4780pfile.ora
xe.__db_cache_size=239075328
xe.__java_pool_size=4194304
xe.__large_pool_size=12582912
xe.__oracle_base='C:\oraclexe\app\oracle'#ORACLE_BASE set from environment
xe.__pga_aggregate_target=427819008
xe.__sga_target=645922816
xe.__shared_io_pool_size=75497472
xe.__shared_pool_size=306184192
xe.__streams_pool_size=0
*.audit_file_dest='C:\oraclexe\app\oracle\admin\XE\adump'
*.compatible='11.2.0.0.0'
*.control_files='C:\oraclexe\app\oracle\oradata\XE\control.dbf'
*.db_name='XE'
*.DB_RECOVERY_FILE_DEST_SIZE=10G
*.DB_RECOVERY_FILE_DEST='C:\oraclexe\app\oracle\fast_recovery_area'
*.diagnostic_dest='C:\oraclexe\app\oracle\.'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=XEXDB)'
*.job_queue_processes=4
*.memory_target=1024M
*.open_cursors=300
*.processes=100
*.remote_login_passwordfile='EXCLUSIVE'
*.sessions=80
*.shared_servers=4
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1' -
DB Login error (ora - 03113 end of file on communication channel)
I'm using oracle 9i on windows xp. Whaen try to login thro sql plus it gives subject error. When try to login from Enterprise Manager no errors are giving but cannot access.
Using sqlplus within same machine where DB is installed. (no remote access).
What could be the reason/ As I understood this is most common error that oracle has.
In addition can anybody explain what are the services that are using when connect to the db. (like listener...)
ThanksHey Sharab,
If you want to connect to OEM(Oracle Enterprise Manager) then first of all you have to configure it. You can find the Enterprise manager Configuration assistant form Configuration menu. First you configure it and then only you can access the database thorough OEM.
Just go through this url. You will know the steps to configure the OEM... Do it accrodingly...
http://download.oracle.com/docs/html/B11000_02/apbinsta.htm
If there is any prblem in accessing this website, then let me know, i will write the steps completely.
Please follow the steps given below to enjoy ur OEM jobs.....otherwise, it will not allow you to do all the activities inside the OEM.
Windows systems require that you set the correct credentials for the Jobs system to work properly in Enterprise Manager. By default, the Management Agent service is installed as a LocalSystem user. When submitting jobs, such as stopping or starting the database, the user submitting the job must have the Log on as a batch job privilege enabled.
Perform the following steps to establish that privilege for any operating system user who needs to submit an Enterprise Manager job.
Start the Local Security Policy tool:
Windows 2003: From the Start menu, select Administrative Tools, then Local Security Policy.
Windows XP: From the Start menu, select Control Panel, Administrative Tools, then Local Security Policy.
Under the Security Settings list, expand the list to Local Policies.
Under Local Policies, double-click User Rights Assignment.
Under Policy, search for the Log on as a batch job policy.
Thanks and Regards,
MSORA -
Encounter "ORA-03113 : end-of-file on communication channel error "
Hi experts :
I schedule a job of MS SSIS(SQL 2005) to do data transfer from Oracle to MS sql server every morning. Few days ago, SQL server report an error as bellow
錯誤: 2010-05-26 06:04:27.87
代碼: 0xC0202009
來源: Package 連接管理員 "pro.twacelifeapp"
描述: 發生 OLE DB 錯誤。錯誤碼: 0x80004005。
有 OLE DB 記錄可用。 來源: "OraOLEDB" Hresult: 0x80004005 描述: "ORA-03113 : end-of-file on communication channel error"。
錯誤結束
"ORA-03113 : end-of-file on communication channel error " happened.
many times It makes SSIS interupt. And the wierd thing is, as I restart SSIS again. Then the process done successfully.
I check Oracle alert.log at the event time, it report "inbound connection timed out (ORA-3136)".
sqlnet.log also list "TNS-12535: TNS:operation timed out".
from the day on, MS SQL server reported this error msg everyday.
I'm really confused and can't find the result of cause.
dose any helps ,thanks~
SQL server version : SQL server 2005
Oracle : Oracle 10g r2ORA-03113: end-of-file on communication channel
Cause: The connection between Client and Server process was broken.
Action: There was a communication error that requires further investigation. First, check for network problems and review the SQL*Net setup. Also, look in the alert.log file for any errors. Finally, test to see whether the server process is dead and whether a trace file was generated at failure time.
Regarda
Asif Kabir -
Convrtd to Invterval Part- ORA-03113: end-of-file on communication channel
Hi all,
I had a table as Interval Partitioned. In order to create XML- Xpath indexes on it, I converted it to Range Partitioned table.
I am able to create the XPATH indexes but I get the error: ORA-03113: end-of-file on communication channel
- When I revert the code to Interval Partitioned without the XMLIndex, it works fine(although takes time as no XML Index)
- When I convert table to non partitioned table, create the XML Index, it works fine.
But I need the partitons, so when I create the partitioned table I get the error.
CREATE TABLE INT_PART_TABLE
DB_ID VARCHAR2(10 BYTE),
xML_mESSAGE SYS.XMLTYPE,
LOAD_TIMESTAMP TIMESTAMP(6)
XMLTYPE xML_mESSAGE STORE AS BINARY XML
PARTITION BY RANGE (LOAD_TIMESTAMP)
PARTITION MAX VALUES LESS THAN (TIMESTAMP' 2013-06-01 00:00:00')
TABLESPACE CSTR_STG_DATA
NOCOMPRESS
NOCACHE
ENABLE ROW MOVEMENT;
BEGIN
DBMS_XMLINDEX.dropparameter('Indx_Par');
END;
BEGIN
DBMS_XMLINDEX.REGISTERPARAMETER(
'Indx_Par',
'PATH TABLE Table1
PATHS (INCLUDE ( /abc:field1/xyz:field2
/abc:field1/def:field2
NAMESPACE MAPPING ( xmlns:abc="ABCD"
xmlns:def="DEFG"
xmlns:xyz="XYZA"
end;
create index INDX_XPATHS on "INT_PART_TABLE" (XML_MESSAGE) indextype is xdb.xmlindex
parameters ('PARAM Indx_Par') local;
Now if I execute the following statement in
SELECT T.xML_mESSAGE
FROM INT_PART_TABLE1 T
WHERE XMLEXISTS (
declare namespace abc="ABCD";
declare namespacedef="DEFG";
declare namespace xyz="XYZA";
let $tt as xs:boolean := fn:exists($p/main/id = ("144283","9085802")])
return if ($tt) then true()
else ()'
PASSING T.xML_mESSAGE AS "p");
- Is there any other way of writing this Select statement, which may work?
- Any other thing I need to take care of when defining the table and partitions script so that I don't get this error?Hi,
I think it's time you give a clear (and working) test case so that we can safely try to reproduce the issue.
What you've given so far has syntax error and name mismatch.
So please :
- database version (SELECT * FROM v$version)
- complete sequence of DLLs
- some sample XML documents (it doesn't have to be the real ones, but at least something realistic)
Thanks in advance.
declare namespace abc="ABCD";
declare namespacedef="DEFG";
declare namespace xyz="XYZA";
let $tt as xs:boolean := fn:exists($p/main/id = ("144283","9085802")])
return if ($tt) then true()
else ()'Why all that stuff? You don't have to return a boolean.
The following works for me on 11.2.0.3 :
SQL> CREATE TABLE int_part_table (
2 db_id VARCHAR2(10)
3 , xml_message XMLTYPE
4 , load_timestamp TIMESTAMP
5 )
6 XMLTYPE xml_message STORE AS BINARY XML
7 PARTITION BY RANGE (load_timestamp) (
8 PARTITION MAX VALUES LESS THAN (timestamp '2013-06-01 00:00:00')
9 )
10 NOCOMPRESS
11 NOCACHE
12 ENABLE ROW MOVEMENT;
Table created
SQL> insert into int_part_table values (1, xmltype('<main><id>144283</id></main>'), sysdate);
1 row inserted
SQL> insert into int_part_table values (1, xmltype('<main><id>9085802</id></main>'), sysdate);
1 row inserted
SQL> insert into int_part_table values (1, xmltype('<main><id>1</id></main>'), sysdate);
1 row inserted
SQL> commit;
Commit complete
SQL> create index int_part_table_uix on int_part_table (xml_message)
2 indextype is xdb.xmlindex
3 parameters (
4 'PATH TABLE INT_PART_TABLE_PT
5 PATHS ( INCLUDE ( /main/id ) )')
6 local;
Index created
SQL> SELECT xml_message
2 FROM int_part_table
3 WHERE XMLExists(
4 '/main[id=("144283","9085802")]'
5 PASSING xml_message
6 )
7 ;
XML_MESSAGE
<main>
<id>144283</id>
</main>
<main>
<id>9085802</id>
</main>
Execution Plan
Plan hash value: 3517234298
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | Pstart| Pstop |
| 0 | SELECT STATEMENT | | 1 | 155 | 34 (6)| 00:00:01 | | |
| 1 | NESTED LOOPS | | 1 | 155 | 34 (6)| 00:00:01 | | |
| 2 | VIEW | VW_SQ_1 | 1 | 25 | 32 (4)| 00:00:01 | | |
| 3 | HASH UNIQUE | | 1 | 47 | | | | |
|* 4 | HASH JOIN SEMI | | 1 | 47 | 32 (4)| 00:00:01 | | |
| 5 | PARTITION SYSTEM SINGLE | | 2 | 90 | 2 (0)| 00:00:01 | 1 | 1 |
|* 6 | TABLE ACCESS BY LOCAL INDEX ROWID| INT_PART_TABLE_PT | 2 | 90 | 2 (0)| 00:00:01 | 1 | 1 |
|* 7 | INDEX SKIP SCAN | SYS117585_INT_PART__PIKEY_IX | 3 | | 1 (0)| 00:00:01 | 1 | 1 |
| 8 | COLLECTION ITERATOR PICKLER FETCH | XQSEQUENCEFROMXMLTYPE | 8168 | 16336 | 29 (0)| 00:00:01 | | |
|* 9 | TABLE ACCESS BY USER ROWID | INT_PART_TABLE | 1 | 130 | 1 (0)| 00:00:01 | ROWID | ROWID |
Predicate Information (identified by operation id):
4 - access("SYS_P3"."VALUE"=SYS_XQ_UPKXML2SQL(VALUE(KOKBF$),2,1,0) AND
SUBSTRB("VALUE",1,1599)=SUBSTRB(SYS_XQ_UPKXML2SQL(VALUE(KOKBF$),2,1,0),1,1599))
6 - filter(SYS_XMLI_LOC_ISNODE("SYS_P3"."LOCATOR")=1)
7 - access("SYS_P3"."PATHID"=HEXTORAW('704E') )
filter("SYS_P3"."PATHID"=HEXTORAW('704E') )
9 - filter("ITEM_6"=TBL$OR$IDX$PART$NUM("DEV"."INT_PART_TABLE",0,7,65535,"INT_PART_TABLE".ROWID))
Note
- Unoptimized XML construct detected (enable XMLOptimizationCheck for more information)
SQL> SELECT xml_message
2 FROM int_part_table
3 WHERE XMLExists(
4 '/main[id="144283" or id="9085802"]'
5 PASSING xml_message
6 )
7 ;
XML_MESSAGE
<main>
<id>144283</id>
</main>
<main>
<id>9085802</id>
</main>
Execution Plan
Plan hash value: 3748936130
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | Pstart| Pstop |
| 0 | SELECT STATEMENT | | 1 | 155 | 11 (10)| 00:00:01 | | |
| 1 | NESTED LOOPS | | 1 | 155 | 11 (10)| 00:00:01 | | |
| 2 | VIEW | VW_SQ_1 | 2 | 50 | 8 (0)| 00:00:01 | | |
| 3 | HASH UNIQUE | | 2 | 180 | | | | |
| 4 | CONCATENATION | | | | | | | |
| 5 | NESTED LOOPS | | | | | | | |
| 6 | NESTED LOOPS | | 1 | 90 | 4 (0)| 00:00:01 | | |
| 7 | PARTITION SYSTEM SINGLE | | 1 | 45 | 2 (0)| 00:00:01 | 1 | 1 |
|* 8 | TABLE ACCESS BY LOCAL INDEX ROWID| INT_PART_TABLE_PT | 1 | 45 | 2 (0)| 00:00:01 | 1 | 1 |
|* 9 | INDEX SKIP SCAN | SYS117585_INT_PART__PIKEY_IX | 3 | | 1 (0)| 00:00:01 | 1 | 1 |
| 10 | PARTITION SYSTEM SINGLE | | 1 | | 1 (0)| 00:00:01 | 1 | 1 |
|* 11 | INDEX RANGE SCAN | SYS117585_INT_PART__PIKEY_IX | 1 | | 1 (0)| 00:00:01 | 1 | 1 |
|* 12 | TABLE ACCESS BY LOCAL INDEX ROWID | INT_PART_TABLE_PT | 1 | 45 | 2 (0)| 00:00:01 | 1 | 1 |
| 13 | NESTED LOOPS | | | | | | | |
| 14 | NESTED LOOPS | | 1 | 90 | 4 (0)| 00:00:01 | | |
| 15 | PARTITION SYSTEM SINGLE | | 1 | 45 | 2 (0)| 00:00:01 | 1 | 1 |
|* 16 | TABLE ACCESS BY LOCAL INDEX ROWID| INT_PART_TABLE_PT | 1 | 45 | 2 (0)| 00:00:01 | 1 | 1 |
|* 17 | INDEX SKIP SCAN | SYS117585_INT_PART__PIKEY_IX | 3 | | 1 (0)| 00:00:01 | 1 | 1 |
| 18 | PARTITION SYSTEM SINGLE | | 1 | | 1 (0)| 00:00:01 | 1 | 1 |
|* 19 | INDEX RANGE SCAN | SYS117585_INT_PART__PIKEY_IX | 1 | | 1 (0)| 00:00:01 | 1 | 1 |
|* 20 | TABLE ACCESS BY LOCAL INDEX ROWID | INT_PART_TABLE_PT | 1 | 45 | 2 (0)| 00:00:01 | 1 | 1 |
|* 21 | TABLE ACCESS BY USER ROWID | INT_PART_TABLE | 1 | 130 | 1 (0)| 00:00:01 | ROWID | ROWID |
Predicate Information (identified by operation id):
8 - filter("SYS_P5"."VALUE"='9085802' AND SYS_XMLI_LOC_ISNODE("SYS_P5"."LOCATOR")=1 AND SUBSTRB("VALUE",1,1599)='9085802')
9 - access("SYS_P5"."PATHID"=HEXTORAW('704E') )
filter("SYS_P5"."PATHID"=HEXTORAW('704E') )
11 - access("SYS_P5"."RID"="SYS_P3"."RID" AND "SYS_P3"."PATHID"=HEXTORAW('0BBD') AND
"SYS_P3"."ORDER_KEY"<"SYS_P5"."ORDER_KEY")
filter(SYS_ORDERKEY_DEPTH("SYS_P3"."ORDER_KEY")+1=SYS_ORDERKEY_DEPTH("SYS_P5"."ORDER_KEY") AND
TBL$OR$IDX$PART$NUM("DEV"."INT_PART_TABLE",0,7,65535,"SYS_P3"."RID")=TBL$OR$IDX$PART$NUM("DEV"."INT_PART_TABLE_PT",0,7,65535,ROWI
D) AND "SYS_P5"."ORDER_KEY"<SYS_ORDERKEY_MAXCHILD("SYS_P3"."ORDER_KEY"))
12 - filter(SYS_XMLI_LOC_ISNODE("SYS_P3"."LOCATOR")=1)
16 - filter("SYS_P5"."VALUE"='144283' AND SYS_XMLI_LOC_ISNODE("SYS_P5"."LOCATOR")=1 AND SUBSTRB("VALUE",1,1599)='144283' AND
(LNNVL("SYS_P5"."VALUE"='9085802') OR LNNVL("SYS_P5"."PATHID"=HEXTORAW('704E') ) OR
LNNVL(SYS_XMLI_LOC_ISNODE("SYS_P5"."LOCATOR")=1) OR LNNVL(SUBSTRB("VALUE",1,1599)='9085802')))
17 - access("SYS_P5"."PATHID"=HEXTORAW('704E') )
filter("SYS_P5"."PATHID"=HEXTORAW('704E') )
19 - access("SYS_P5"."RID"="SYS_P3"."RID" AND "SYS_P3"."PATHID"=HEXTORAW('0BBD') AND
"SYS_P3"."ORDER_KEY"<"SYS_P5"."ORDER_KEY")
filter(SYS_ORDERKEY_DEPTH("SYS_P3"."ORDER_KEY")+1=SYS_ORDERKEY_DEPTH("SYS_P5"."ORDER_KEY") AND
TBL$OR$IDX$PART$NUM("DEV"."INT_PART_TABLE",0,7,65535,"SYS_P3"."RID")=TBL$OR$IDX$PART$NUM("DEV"."INT_PART_TABLE_PT",0,7,65535,ROWI
D) AND "SYS_P5"."ORDER_KEY"<SYS_ORDERKEY_MAXCHILD("SYS_P3"."ORDER_KEY"))
20 - filter(SYS_XMLI_LOC_ISNODE("SYS_P3"."LOCATOR")=1)
21 - filter("ITEM_2"=TBL$OR$IDX$PART$NUM("DEV"."INT_PART_TABLE",0,7,65535,"INT_PART_TABLE".ROWID))I asked in one of your other threads if /main/id was unique per XML document.
If so, you can use a simple function-based index instead of the XMLIndex :
SQL> drop index int_part_table_uix;
Index dropped.
SQL> create index int_part_table_ix1 on int_part_table (
2 xmlcast(
3 xmlquery('/main/id' passing XML_MESSAGE returning content)
4 as varchar2(10)
5 )
6 );
Index created.
SQL> SELECT xml_message
2 FROM int_part_table
3 WHERE XMLCast(
4 XMLQuery('/main/id' PASSING xml_message RETURNING CONTENT)
5 AS VARCHAR2(10)
6 )
7 IN ('144283', '9085802');
XML_MESSAGE
<main>
<id>144283</id>
</main>
<main>
<id>9085802</id>
</main>
Execution Plan
Plan hash value: 2864653096
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | Pstart| Pstop |
| 0 | SELECT STATEMENT | | 2 | 236 | 2 (0)| 00:00:01 | | |
| 1 | INLIST ITERATOR | | | | | | | |
| 2 | TABLE ACCESS BY GLOBAL INDEX ROWID| INT_PART_TABLE | 2 | 236 | 2 (0)| 00:00:01 | 1 | 1 |
|* 3 | INDEX RANGE SCAN | INT_PART_TABLE_IX1 | 2 | | 1 (0)| 00:00:01 | | |
Predicate Information (identified by operation id):
3 - access(CAST(EXTRACTVALUE(SYS_MAKEXML(0,"SYS_NC00003$"),'/main/id',null,0,0,524293,1073874944) AS
varchar2(10) )='144283' OR CAST(EXTRACTVALUE(SYS_MAKEXML(0,"SYS_NC00003$"),'/main/id',null,0,0,524293,1073874944
) AS varchar2(10) )='9085802') -
ORA-03113: end-of-file on communication channel, Please help
hello Seniors,
i have strange situation, facing it for the first time.
i m/s detail form and i am entering data. i successfully saved few records.
i completed entering one more record and for a reason i left it unsaved.
after lets say may be a minute or so, i got back to work and then tried to save the unsaved record
displayed on screen. when i pressed save button i got error;
ORA-03113: end-of-file on communication channel
leaving the form as is with this error displayed, i notice that i can very well use the db at server level
by running other sqls, meaning other resources are functioning. even i tried to open the same application again
leaving the erroneous form as is, and tried to enter in another form , it communicated well and saved without any errors.
also there is one more errro along with this, when i query; says "Unable to perform query"
ORA-01041: internal error. hostdef extension doesn't exist
and when exit the current form it quits the entire application and kills that particular session,
but the db is still up and running with no errors.
The Tnsping <hostname> is responding.
i want to know while entring on a form, is there any time-out limit between the entry and saving point?
or any other solution please help. vm thankful.
my db
SQL*Plus: Release 10.2.0.1.0 - Production on Sat Jul 25 09:31:46 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Release 10.2.0.1.0 - Production
form;
Forms [32 Bit] Version 6.0.8.25.2 (Production)
Oracle Database 10g Release 10.2.0.1.0 - Production
Oracle Toolkit Version 6.0.8.25.0 (Production)
PL/SQL Version 8.0.6.3.0 (Production)
Oracle Procedure Builder V6.0.8.21.0 Build #1459 - Production
PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
Oracle Query Builder 6.0.7.1.0 - Production
Oracle Virtual Graphics System Version 6.0.5.38.0 (Production)
Oracle Tools GUI Utilities Version 6.0.8.25.0 (Production)
Oracle Multimedia Version 6.0.8.25.0 (Production)
Oracle Tools Integration Version 6.0.8.18.0 (Production)
Oracle Tools Common Area Version 6.0.8.18.0
Oracle CORE Version 4.0.6.0.0 - Production
Edited by: user10967485 on Jul 25, 2009 12:47 AM
Edited by: user10967485 on Jul 25, 2009 12:52 AMi was testing entering into different forms of my application.
what i notice that this problem persist with just one form i.e. my purchase order header-details form.
whats happening is, it allows just the first or rather 1 record (incase if are in a query mode and select create record),
saving the next or IInd record returns this error. God knows why..?
can you please suggest any debugging technique to catch the theif?
i have WNFI, POSt-FORM-COMMIT, KEY-COMMIT, PRE-COMMIT, PRE-FORM at form level
at heade block i have ;
PRE-INSERT,UPDATE,DELETE, PRE-RECORD,POST-QUERY, KEY-ENTQRY, ON-POPULTE-DET
at detail blcok i have;
PRE-INSERT,UPDATE,PRE-RECORD,POST-QUERY,WHEN-REMOVE-RECORD.
sqlnet.ora, i have at 4 different dir;
C:\orant\NET80\ADMIN & C:\orant\NET80\ADMIN\SAMPLE AND
C:\oracle\product\10.2.0\db_1\NETWORK\ADMIN & C:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\SAMPLE
I am not so good with Dba interface, so please suggest me which particular file should refer and
where & what exactly should i look for..? as the file contains a comrehensive entries.
thankyou once again.
on displaying error from Help i get this;
INSERT INTO PURCHASE_ORDER_DETAIL) VALUES ) RETURNING ROWID,POD_COMP_CODE,POD_DATE,POD_POH_CODE,POD_POH_NO,POD_REMARKS,POD_CR_UID,POD_CR_DT,POD_UPD_UID,POD_UPD_DT,POD_PROD_CODE,POD_UOM,POD_QTY,POD_RATE,POD_CURR_CODE,POD_FX_RATE,POD_fc_AMOUNT,POD_LC_AMOUNT INTO :1,:2,:3,:4,:5,:6,:7,:8,:9,:10,:11,:12,:13,:14,:15,:16,:17,:18
ORA-03113: end of on communication channel. -
ExtractValue Problem----- ORA-03113: end-of-file on communication channel
Dear Friend
My system is now on this version
Oracle9i Enterprise Edition Release 9.2.0.4.0 - Production
PL/SQL Release 9.2.0.4.0 - Production
CORE 9.2.0.3.0 Production
TNS for Linux: Version 9.2.0.4.0 - Production
NLSRTL Version 9.2.0.4.0 - Production
earlier it was
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
PL/SQL Release 9.2.0.1.0 - Production
CORE 9.2.0.1.0 Production
TNS for Linux: Version 9.2.0.1.0 - Production
NLSRTL Version 9.2.0.1.0 - Production
I took the cold backup and restore in this version. after that my total system is working very fine, is very fast using than the previous. But only one SQL command is not working which is very urgent to solve
when i am using this
SELECT extractValue(value(t),'/produit/cod_pro') cod_pro
FROM XMLTABLE X,
TABLE ( xmlsequence (extract(XML_data,'/com/lProducts_list/produit'))) t;
the table structure is
SQL> desc XMLTABLE
Name Null? Type
DOC_ID NUMBER
FILE_NAME VARCHAR2(100)
FILE_DATE DATE
XML_DATA XMLTYPE
I got this error
ORA-03113: end-of-file on communication channel
Please guide me what to do to resolve this problem
FarhadThe error, ORA-03113: end-of-file on communication channel, is a client driver error.
The client driver simply says "hey, the database server process servicing me has torn down our communication channel!". The communication channel is usually a TCP socket connection.
The client driver has no idea why. Thus you have to find the answer on the server.
The usual cause of this communication channel being closed, is the Oracle server process servicing the client session, crashing.
When an Oracle server process crashes, it does not tell the client. It usually writes an entry to the Oracle alert log, dump a trace file, and terminates. When terminating, it tears down any communication channels (TCP sockets) it may have opened.
Therefore you must look in
- the alert log file for an error message listing the crash (which will include the dump file name)
- look at this trace dump file (which is difficult if you're not familiar with Oracle internals)
- investigate the stack trace and error codes on Metalink (which often turns up the bug notes for this, plus any workarounds or available patches)
Usually however, one should log these types of Oracle server errors as a TAR with Oracle Support. -
EAL extract fails with ORA-03113 end-of-file on communication channel error
Hi,
We are trying to run an EAL (v11.1.1.4) extract from an HFM (v9.3.1.4) environment onto Oracle database. We are able to run the extract successfully for few hundred records, but when the records exceeds 10 million we get the error below
[03 Dec 2011 06:02:41] [dbmgr] ERROR: OCI: HR#13579: Cannot execute statement for insert
[03 Dec 2011 06:02:41] [dbmgr] ERROR: OCI: HR#01428: OCI_ERROR: (ORA-03113: end-of-file on communication channel;Process ID: 16323;Session ID: 15 Serial number: 8288; (code=3113)) [rec#1]
[03 Dec 2011 06:02:41] [dbmgr] ERROR: OCI: HR#13580: Cannot rollback
[03 Dec 2011 06:02:41] [dbmgr] ERROR: OCI: HR#01428: OCI_ERROR: (ORA-03114: not connected to ORACLE; (code=3114)) [rec#1]
[03 Dec 2011 06:02:41] [dbmgr] WARN : HR#13674: Data move region job failed: HR#00000: some operations failed, see details in the log file; 81877900 cell(s) processed in 70348 second(s)
We checked on the DB and the Oracle session that was doing the insert was open even after the extract failed with the above error.
Any idea what could be causing this??
Thanks
Ramya SureshHi,
I was able to fix this issue.
From the trace file identified the related objects and validated them.
More details can be found in below MOS note.
[ID 421711.1]--Understanding and Diagnosing ORA-00600 [17069] Errors
Thanks for all the inputs... -
ORA-03113: end-of-file on communication channel ERROR
After applying Database patch 3095277 to my 9.2.0.1.0 installation
in order to update it to 9.2.0.4.0,I'm getting ORA-03113: end-of-file on communication channel
ERRORS when attempting various tasks. This is a local installation running on a Windows XP Workstation.
I've even tried creating a new test database but the result is the same.
The reason for moving up to 9.2.0.4.0 is so I can start using Advanced Queuing, which I understand had problems in earlier releases.
However before the update I could at least create the JMS queue tables without ERROR whereas now I get the following errors when attempting to create a queue table in SQL Plus from within Enterprise Manager Console.
SQL*Plus: Release 9.2.0.4.0 - Production on Thu Sep 18 08:20:08 2003
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected.
BEGIN SYS.DBMS_AQADM.CREATE_QUEUE_TABLE(Queue_table=> 'JMSQTBL',Queue_payload_type=>'SYS.AQ$_JMS_STREAM_MESSAGE',multiple_consumers=> false); END;
ERROR at line 1:
ORA-03113: end-of-file on communication channel
BEGIN SYS.DBMS_AQADM.CREATE_QUEUE(Queue_name=> 'JMSQUE',queue_table=> 'JMSQTBL'); END;
ERROR at line 1:
ORA-03114: not connected to ORACLE
I would be grateful of any pointers as to how to resolve this problem.
Regards
Gary.Chris, Thanks for the suggestion,
I took a look in the trace log and found the following entries that point to a ORA-00600 as you mentioned earlier.
This is only a test database so there's no great loss if
I have to re create it, but in saying that I did create a new test02 from scratch and had the same problem.
Is it posible something went wrong when applying the 9.2.0.4.0 patch ?.
Regards
Gary.
Dump file c:\oracle\admin\test01\udump\test01_ora_2556.trc
Wed Sep 17 16:25:14 2003
ORACLE V9.2.0.4.0 - Production vsnsta=0
vsnsql=12 vsnxtr=3
Windows 2000 Version 5.1 Service Pack 1, CPU type 586
Oracle9i Enterprise Edition Release 9.2.0.4.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.4.0 - Production
Windows 2000 Version 5.1 Service Pack 1, CPU type 586
Instance name: test01
Redo thread mounted by this instance: 1
Oracle process number: 10
Windows thread id: 2556, image: ORACLE.EXE
*** 2003-09-17 16:25:14.046
*** SESSION ID:(7.17) 2003-09-17 16:25:14.031
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** Object defn.s out of sync w/ data
*** 2003-09-17 16:25:14.281
ksedmp: internal or fatal error
ORA-00600: internal error code, arguments: [qmxiUnpPacked2], [121], [], [], [], [], [], []
Current SQL statement for this session:
select 1
from resource_view
where any_path = '/xdbconfig.xml'
----- PL/SQL Call Stack -----
object line object
handle number name
6A4FA348 6 package body XDB.DBMS_REGXDB
6A504D88 1 anonymous block
6A576AB8 639 package body SYS.DBMS_REGISTRY
6A1DBB6C 1 anonymous block -
ERROR at line 1: ORA-03113: end-of-file on communication channel
I have a DRDA gateway set up between my Oracle 10.2.0.4 instance (linux 64 bit), and a DB2 UDB instance (v 8.2 32 Bit). Within a SQLPlus session, I'm able to successfully interact with tables (select, update, delete) that do not have CLOB columns defined. However, whenever I try to access a table with a CLOB column (even doing a select on a single row), I get an end-of-file communication error and it kicks me out of my session. I can interact with the table as long as I don't include the CLOB/BLOB columns. Is there some additional configuration or memory settings I'm missing?
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> select * from mytablewithaclob@db2 where l_column= 1;
select * from dbo.mytablewithaclob@db2 where l_column= 1
ERROR at line 1:
ORA-03113: end-of-file on communication channelI add the following codepage.map (as per another post) - packages are bound properly, and tables without clobs I can interact with just fine.:
S 367 > US7ASCII
D 13488 > AL16UTF16
D 1200 = AL16UTF16
M 1208 = UTF8
MBC 1208 = 1208 1200
column in question is defined as follows in DB2:
mycol CLOB(1G) DEFAULT '' NOT NULL NOT LOGGEDAny thoughts? Much appreciated.
Edited by: kpw on Sep 3, 2009 4:21 PMUnfortunately TG4DRDA 10.2.0 does not support DB2 (C)LOB datatype. A crash is a rather unpleasant way to report this inability... but that could depend on the version of TG4DRDA you use (10.2.0.1.0). I guess when you upgrade TG4DRDA to 10.2.0.4.0 you will get a proper error message (ORA-28527 - datatype conversion error).
As workaround you could:
- create a view on the DB2 table and exclude the (C)LOB columns
- move/copy the (C)LOB data into a TG4DRDA supported datatype ((long) varchar for bit data)
Regards,
Ed
Maybe you are looking for
-
How can we know weather a report is running in background or foreground?
Is there any system variable to find it?
-
CS3 Extended or CS3 for use with LR?
CS3 Extended refers to an interface to Lightroom; however, I've found I can use CS3 to edit and save back to Lighroom. If all I'm doing is using plugins in CS3 to do noise reduction and sharpening, and CS3 to print, why would I need Extended?
-
TS4147 How do I resolve duplicates resulting from contacts created from different accounts?
I have duplicate contacts in my address book. I discovered by merging that the duplicate contacts were created from different accounts. How do I ID the account the contact was created from? Note: the duplicates are in my address book only. I do not h
-
When I try to get album artwork for iTunes, a message pops up saying that I need to sign into the ITunes store. But when I do, I still don't automatically get the "Cover Flow." I'm working in Windows XP. Has anyone had this problem?
-
Assign the desired activity type to cost center 1102 within cost center acc
Dear all, I am facing the problem mentioned as subject during entering the activity type. please guide me to overcome this problem. rgds, Vijay Mankar