Export Multi-artboard filename without prefix slash

My mac OS version is OS X 10.10.2.
Since i update the Illustrator from cc to cc2014,
when i export multi-artboard images,
the artboard image filename will be automatic added a slash mark in the first character position,
like "/someprefix_artboardname.png"
The correct filename should be"someprefix_artboardname.png".
It won't happened in Illustrator CC.

I have been using this method successfully for quite some time with these exact files, only in the last few days has this problem shown up.
When I originally made the template in indesign, I imported the pdf, showed import options, and linked the pages to the same page number in the pdf. 1 to 1, 2 to 2, etc. My original thought was that this setting had been lost, so deleted the linked pdf and imported it again to try to get the 1 to 1 link. However, that did not change anything and I noticed that the page that shows up by itself in the pdf is almost always page 2, not page 1. If the page-to-page connection had been lost, all of the pages in indesign would be linking to page 1 as is the default behavior for linked pdfs.
Also, I thought that the save issue would be on the illustrator side too, so I tried resaving it but that didn't work either. The only way that I can get the file to work is if I remake it completely and save over the old file.
Now, I know that you're most likely thinking that this is an illustrator issue, but I don't think that it is one or the other, but rather both of them. The screenshots that I attached above are not the only way this error manifests itself. Sometimes the pdf looks right in acrobat, but once it is linked it displays with a transparency, shows only a few of the pages, or shows none at all.
I'm probably going in circles here, but I cannot figure out which program is the cause of the error or if there are two different issues that are happening at the same time.

Similar Messages

PS CC: export layer to files without prefix / numbers

Hi,
Trying to modify the script in Photoshop CC for the "layers to file" option in order to remove the number-prefix, I just got erorrs.
Has anyone a working solution for removing the numbers while exporting?
Thanks.
Julia

Oh, I`ve got the solution:
Start line 1020:
var fileNameBody = fileNamePrefix;
        //fileNameBody += "_" + zeroSuppress(i, 4); (change this line into a comment)
        if(fileNameBody != '') fileNameBody += "_";   (make an if-statement for the case you give the file a perfix, it will add automatically an underscore)
        fileNameBody += layerName;                         (say that the file name is the layer name)
done

Photoshop CC export layers to files without prefix

Can anyone help with this?

Maybe you should ask over at
http://forums.adobe.com/community/photoshop/photoshop_scripting?view=discussions

Multi-Artboard export to multi-file PDF

Hey gang.
I have an Illustrator CS4 document with 51 artboards. I would like to easily export each artboard to its own PDF file based on a PDF preset. Currently when I do save as I can select the indivual artboard and it will only save the content on that artboard to a PDF file. However I don't want to do that 51 times for each design file (100+ design files).
Any thoughts on how to export a single artboard in a multi-artboard document to a single PDF file for each artboard in the file?
Cheers!
Tom

Well I ended up writing something to solve this problem. I hope this snippet helps somebody else stuck in a similar situation. This applescript saves each artboard as its own PDF file based on a pdf preset and flattener preset.
-- User configuration
set PDFPreset to " " ----------- YOUR PDF PRESETS HERE -------------
set PDFFlat to " " ----------- YOUR FLATTENER PRESETS HERE -------------
set DefaultLoc to " " ----------- YOUR DEFAULT SAVE LOCATION HERE -------------
-- User configuration
set theDesignName to " "
set destFolder to " "
set destFile to " "
tell application "Adobe Illustrator"
    if (count every document) > 0 then
        if (count every document) > 1 then
            display alert "Please have only 1 file open in Illustrator to perform this PDF export."
        else
            -- what file is it and where do we want to export
            display dialog "Please enter the desired export filename name:" default answer theDesignName
            if button returned of result is "OK" then
                set theDesignName to text returned of result as string
                set destFolder to choose folder with prompt "Please select the folder to save " & theDesignName & " :" default location DefaultLoc
                set numArtboardsPrintable to count every artboard in document 1
                display dialog "Exporting " & numArtboardsPrintable & " individual files."
                -- Export the artboards to individual PDF files with a PDF presets
                repeat with incr from 1 to numArtboardsPrintable
                    set PDFExportSettings to {class:PDF save options, PDF preset:PDFPreset, view pdf:false, flattener preset:PDFFlat, artboard range:(incr)}
                    set destFile to destFolder & theDesignName & "-" & incr as string
                    save document 1 in file destFile as pdf with options PDFExportSettings
                end repeat
                display dialog "All done."
            end if
        end if
    else
        display alert "Open a document before running this script"
    end if
end tell

How do I stop Illustrator automatically adding numbers to file name when exporting with artboard?

I need to export with artboard. Illustrator automatically adds a number to my original file name. It won't even let me replace the old file. It is extremely annoying and makes flow with other programs really hard because they can't auto update, since the file name changes. When you have multiple files, you can't be manually renaming all the time. Anyone knows how to fix this? Thanks.

This has been discussed a few times, and here is a summary of the usual solutions.
http://forums.adobe.com/message/2989508#2989508
What is it EXACTLY you are trying to do. Are you trying to export a single page from filename.ai and make it filename.psd, (without any number afterwards). In that case you could delete the extra artboards prior to export, and then you won't have to checked use artbaords as there is only one page. Otherwise I would plan ahead so your end result will be filename-01.jpg, filename-02.jpg, and then everytime you use export artbaords those names will replace.
I am happy with the function as is, and would prefer to have a serial number automatically after the name when checking use artboards. But sounds liek you and others desire more options and thte ability to turn off adding to the filename.

Exporting Multiple Artboards of Different Formats Easily

I have one document with multiple artboards. I need to export each artboard with different formats and ppi. Is there a way I can do this quickly and efficiently without having to export each artboard individually? Thank you in advance for your time, insight, and help.

Thanks for the reply Wade.
It an unusual sitatution. I have a whole document created in illustrator. I'm handing it over to a client for them to work on in-house and they've requested an inDesign file. Ideally I'd like a way of exporting my ai file into an indd file. Haven't been able to find a way of doing this at the moment.

Can you export multi track audio using FCPX?

hey guys
i can only find export audio under the "share" menu
and it has aiff,aac and mp3, no wav or omf and no options to include as multi tracks rather than a single stereo track or 5.1 surround
do you guys know of a way to export multiple tracks? without muting every track and export numerous times of course

Typed this hours ago and forgot to post it.....
Have actually done that and sent a test piece to the broadcaster. Not sure if I have got the audio tracks in the right order.... from top to bottom would that be audio tracks 1-4, with four at the bottom? I am waiting to hear back from the broadcaster to see if the test piece works as they expect it to.

In Indesign CS6 I export an artboard to TIFF with the sdk's funtion SnapshotUtilsEx- ExportImageToTIFF(iStream) and, the resulting file is one pixel too large in the X, leaving a transparent strip on one edge. Any idea if there is a bug in the sdk?

In Indesign CS6 I export an artboard to TIFF with the sdk's funtion SnapshotUtilsEx->ExportImageToTIFF(iStream) and, the resulting file is one pixel too large in the X, leaving a transparent strip on one edge. Any idea if there is a bug in the sdk?

An easy example to prove this bug of Indesing CS6: I create a psd with Photoshop CS6, with width 505 pixels, height 317 pixels and a resolution of 300 pixels per inch. This psd is placed on a page in InDesign CS6. Then I try to export it as a tiff with the functions:
fSnapshotUtilsEx->Draw(flags,fullResolutionGraphics,greekBelowPtSize,enableAntiAliasing,tr ansparencyQuality,abortCheck,pVPAttrMap,bDrawNonPrintingObjects);
and
SnapshotUtilsEx-> ExportImageToTIFF (iStream)
The resulting tiff has a width of 506 pixels (one pixel more in width). It will happen the same if we start with a width of 507 pixels, etc.
This error does not occur with Indesign CS5, nor Indesing CC.

Export to pdf filename (can of worms?)

I know this is probably a perenial post, but I'm trying to unserstand the logic of not picking up the filename in PDF exports.
Anyone know if this behaviour can be changed in CS4.
Adobe: Can you please give us a button in the export dialogue to chose to export to the filename? Its a small thing, a bit like my brain, when I'm trying to remember the filename of the document and trying to keep my exports in sync with my files.

If it's really a thorn in your side, 4 quick keystrokes can serve as a workaround:
When you're ready to export, press Ctrl+Shift+S to bring up the Save As dialog box, which will contain the current filename, preselected for you. Press Ctrl+C to copy it, then Esc to cancel the Save As operation and dismiss the dialog box.
Now press Ctrl+E invoke the Export dialog box, and paste the filename in using Ctrl+V.
Sounds like more than it is...only takes an extra 2 or 3 seconds:
Ctrl+Shift+S
Ctrl+C
Esc
Ctrl+E
Ctrl+V

How can I get a filename without the file extension?

I using a JFileChooser to select and read a file. Now I want to get the filename without the file extension
JFileChooser j = new JFileChooser;
String file = j.getSelectedFile.getName();
At the moment I get this result "file.dat". I need only the filename.....
Thank you
Thomas

It's quite that.
Here is the code to do that (and the method to get only the extension):
     public String getFileName(String text) {
          int ind = text.lastIndexOf(".");
          if(0<ind && ind<(text.length()-1)) {
               return text.substring(0, ind);
          return(null);
     public String getFileExtension(String text) {
          int ind = text.lastIndexOf(".");
          if(0<ind && ind<(text.length()-1)) {
               return text.substring(ind+1).toLowerCase();
          return(null);
     }(I used 0<ind instead of ind>0 because with the code formatting there is a bug with > )
I hope this helps,
Denis

Email response: Get filename without extension

I've got the following workflow setup:
On subscription:
- Encode file to lowres h264 quicktime movie
- Place encoded file on webserver(make no new asset)
- Send email with: Video ready review on http://localhost/[[File Name]]
This workflow works when encoding an original quicktime movie. But when a mpeg is being encoded the link in the email says video.mpg. Instead of video.mov.
Is there a way to only get the filename without the extension so I can put this down in my mail: http://localhost/[[File Name]].mov
Another thing I ran into is that if the filename contains spaces the link is not being put down nice in the mail. I there a way to use html tags?
Message was edited by: StefSOFT

Why not just use the builtin method. No ned to customize for this.
set wshell = createobject("WScript.Shell")
CurPath = WShell.Currentdirectory
Set fso = CreateObject("Scripting.FileSystemObject")
Set objFolder = fso.GetFolder(curpath)
Set files = objFolder.Files
For each fileIdx In files
WScript.Echo fileidx.name
Wscript.Echo Replace(fileIdx.Name,"." & fso.GetExtensionName(fileIdx.Path),"")
Next
You just need one line.
FYI
I do not understand the use of ByVal when that is the default for VBScript and nearly all languages.
ByRef can be used to allow a function to set a value and have it set the value in the caller.
ByVal and ByRef will not affect a true object like the fso. Objects are alway passed by reference in VB languages.
¯\_(ツ)_/¯

Multi-server Environment without Windows Domain

Hi,
Has anyone had experience with installing SAP BPC in a multi- server environment without using Microsoft Active Directory as a domain. (ie just using local users for everything).
Do we need to create a domain in order in successfully install and use the BPC? If that is the case, which server is best suited to install the domain on?
Many thanks

Hi,
Do you have at least a domain for hosting your servers ? Without an administrative domain for computer and technical accounts I doubt you could even make BPC work in a multi-servers environment.
If you don't have a domain for your users, you may (but i will never recommend it), create all your users localy. But you will have to create them on all BPC servers with same name / same password. Password adminisration will be a real mess as you will have to change the password on all machine each time the user want to change it. And this will not be done by the end-user but by IT staff. Also, users will not be able to use Windows Integrated Authentication functionnality.
So basically, yes use a domain for computer and users. The most easy architecture is to use a single domain for both computer and users.
If you have to install a Windows AD, I would take a look at Microsoft white paper and KB. But I think that you have to dedicate at least 1 machine for it (best is to have 2 servers for fault tolerance).

Multi language website without a database?

I would like to make a website in norwegian and english (perhaps also in spanish).
I use DW5 but I don't have much experience with databases (so I don't use this in this case).
Are there any way to make multi language site - without make a copy of the whole site and correct it? Of course I will have to change the text in the webpages, but I'm more thinking of the dwt-(template-files) and css-files...Not making new dwt and css file but keep them, and correct text pages.
Could I use some kind of script?
Is this this enough information to understand what I want to do?
Hope for the best
Morten

Hi
Yes, there is enough information to say that there is no 'magic' script that will do what you wish and that the way you describe, (create separate pages for each language) is the only way to do this if you do not wish to use a database.
You could use Google's translate to do the translation when the specific language is selected, but in my experience the translations are only usable as an approximation, and definitely should not be used on a professional web site as the actual content.
PZ
www.pziecina.com

Adding zeros to filenames when exporting in Lightroom "Filename-001" "Fliename-002" etc?

Hi, does anyone know if it is possible to add zeros before numbers when exporting files eg: "Filename-001" "Fliename-002" etc? The default setting is "Filename-1" "Filename-2" ect. The reason I want to have zeros in the number sequence is that certain software will display files in the wrong numerical sequence eg: "Filename-1" "Filename-10" Filename-11" etc and then "Filename-2" after "Filename-19". If zeros are added the files will always be displayed in the correct sequence "Filename-001" "Filename-002"... "Filename-009" "Filename-010" "Filename-011" etc.

Just customize the filename using the template editor, and use the Sequence token set to the number of leading zeroes you want, as shown.

I am unable to export images from Aperture without crashing the app.

Having just upgraded to Mavericks and the current version of Aperture, I am unable to export images or videos without Aperture crashing. I'm reinstalled Aperture and done a fresh reinstall of Mavericks with no change in condition. Any suggestions?

Hi there mapboys,
You may find the troubleshooting steps in the article below helpful.
Aperture 3: Troubleshooting Basics
http://support.apple.com/kb/ht3805
-Griff W.

Export Multi-artboard filename without prefix slash

Similar Messages

Maybe you are looking for