Export multiple regions with effect

Hi guys,
I have some hundreds of regions of a vocal recording. I'd like to apply the same amount of reverb and compression to all these regions and export them all at once (mp3).
What I did: all regions in consecutive order on one audio track with insert effects.
I tried the export feature but it allows to export one region at a time even when I select all regions. This seems to be work for a week....
I'd also like to be able to define an additional length for the newly created regions, so the reverb would not be cut off.
When I export from the audio bin it doesn't include the effects.
I also tried creating markers from the original regions, bounce the whole track and then...? Is there a way to cut the bounced filed corresponding to all these markers?
Thanks for help,
Eddie

How many 100's?
Reimporting the regions will give you the option to put them on seperate tracks....you can do 50 or 100 at a time... Logic will put them on seperate tracks for you... don't import from scratch or Logic might have to redraw the overviews
Make a channel strip of the desired pluggins...
Adding a channel strip to 100 tracks takes about 15 minutes...depending upon which pluggins you are using, you might run out of system resources
then export all tracks as audio
I'm thinking 300 audio files with effects could be created in about maybe 3 hours...unless they are over 1 minute each, or you have system resource issues
Of course, I have to add every 15 minutes checking the forum, so make this at least an 8 hour job!
Message was edited by: Scott Roewe1

Similar Messages

How to export multiple regions with fades to audio files

When I have a bunch of regions that I want to export to audio files Logic manages to ignore the fades I created on them. Is there any other way than bouncing every single region? Basicly I just want to consolidate (like PT) the regions fom the project including the fades.

Sorry, but I forget to tell you, that is one of my report is Interactive Report and another is PL/SQL function returning SQL query report
I know about thats two links which you posted.
I have tryed Denes Kubicek link and his exaple not worked. When I press "Download Excel" button I got excel file only with first report on it (http://htmldb.oracle.com/pls/otn/f?p=31517:108)
And his package (export_excel_pkg) have a limitation: This package will not work for Function Returning SQL type of report.
By second link, I must totally reprogramming all three my reports, thats is not goog for me.

Exporting multiple files with passthrough settings at once

I have a gaggle of videos in mp4 format (some with m4v extensions) that I want to export in Quicktime Pro to change the headers so that my PS3 can play them (some currently come up as corrupted data on the PS3 because it doesn't like some of the information in them.. doing a passthrough with Quicktime solves the problem).
My question is, is there a way to do multiple files at once instead of doing one, loading the next video, exporting it, loading the next, etc.? Most programs that convert/export video files have some sort of que or something. I'm using the most recent version of Quicktime Pro and I'm on a Vista machine.

I have a similar problem. I need to convert a lot of Flip MinoHD files so I can edit them in Adobe Premiere. I have found a setting in Quicktime Pro that will do the export, but only for one files at a time. If Quicktime Pro doesn't have a way to do batch processing of exporting it should develop one.

Mass Export of Regions with Plug-ins

Hey guys,
I've been working on a project, and now what I need to do is export 100 or so regions on 1 track with the plug-ins.
Since I've got about 15 tracks of roughly 100 or so regions, it gonna tack awhile to export them one by one.
Does anybody know a way where I can export all the regions on a track into audio files, with the plug-ins enabled aswell?; I also need the names of the regions to stay the same aswell.
If anybody can help me that would be great.
Thanks

Hmm, I'd probably, in a test project, move the regions to new tracks (one track per region) and then do the bounce in place function, which will get you the bounced audio files batch bounced.
Then I'd probably trick Logic's file handling to load in the new audio files in place of the existing ones, by manually locating the missing files in the new location.
It's a bit tedious though - out of interest, why do you need to do this, in place of a simple freeze or track bounce? Is this for exporting to someone else?

How to export multiple albums with a single export??

If there's a way to do this, I haven't been able to figure it out...
If I have a project that contains X number of albums, is there a way to do a single export of the project/albums so that the exported jpgs are automatically put into folders that have the same names as the albums? As opposed to having to go to each album one at a time, create a folder with the same name as the album, and export the images it contains, then repeat for the next album.
Hope I'm being clear the way I explained it...thanks for any tips,
-Nelson

Hi
What is your source data?
If the source is external to the SQL Server (like a log file, Excel, CSV, JSON, XML, external application...) you can and should insert it all using Bulk Insert operation.
Pls clarify what is your source data, and if you need more help using Bulk Insert.
https://www.simple-talk.com/sql/learn-sql-server/bulk-inserts-via-tsql-in-sql-server/
http://msdn.microsoft.com/en-us/library/ms188365.aspx
[Personal Site] [Blog] [Facebook]

Export multiple images with random layers

I have this texture file that has many different variations to it. (3 different kinds of pants, different hairpieces, some optional items, etc...)
What i want to do, is export it with random layers selected. (there are also folders inside, it's fine if i have to merge the folder into a single layer, but it would be better if it could treat the folders as a layer)
There are 2 layers that must always be on,
then there are 6 other layers that can be mixed and matched completely at random.
Finally: there are 3 layers that only one of them can be active at one time (if one is active, the other 2 cannot be). Those last 3 layers I wouldn't mind if i had to go through manually and remove the combinations that couldn't work, but it would be much better to have it automatic.
Is there any way to script this so that it exports all of these textures as *filename*_*variation#*.png

-the first 8 lines just make sure there is a valid document open, and if there is, find out the file path and everything
Correct.
But I cut corners, if I were more diligent I would also check for the existence of more than one layer and that the file has been saved at all (otherwise it has no path and an error occurs) etc.
-line 14 just makes sure it outputs no more than 20 images (which i find odd. the texture files are extremely small ~6.82 kb each, so loading them won't be a problem. it would be good if it got stuck in an infinite loop)
Feel free to change it to a higher number.
To create 100 files change to
for (var p = 1; p < 101; p++) {
Why is thearray2 put in thearray, but then never used separately?
The function RandomShow checks if the elements in the Array are Arrays themselves
if (theObject.constructor != Array) {
and just assumes it is a Layer if it is not an Array.
But when it is an Array the function RandomShow is run with that Arrays elements as arguments.
This is intended to enable the various rules – for example if you have two or more Layers of which only one may be visible you could put them in such an Array with minimal and maximal set to 1, which should only make one visible.
But – and again I should have included checks for this – you should not put a Layer in more than one Array.
In the example changing theArray2 to
var theArray2 = [[theLayers[0], theLayers[1], theLayers[2]], 1, 1, "no"];
would mean that 7, 8 and 9 would only be visible individually.
But as theArray2 is itself part of theArray it may be visible or not unless it is set as the baseLayer.
Or rather it would if I had not forget to check the baseLayer item for being an Array itself …
So please change the affected if-clause (should be about line 34) to
// show the baselayer;
if (baseLayer.constructor == Number) {
          var theObject = theArray[baseLayer];
// show baselayer if layer;
          if (theObject.constructor != Array) {
                    theObject.visible = true;
// run function if baselayer is an array;
          else {
                    RandomShow (theObject[0], theObject[1], theObject[2], theObject[3])
          maximal--
-baselayer is defined (but i can't find out where to input what it is, do i put it in place of the "no" on line 15?)
The function takes four arguments,
• the Array
• the minimum number of visible elements
• the maximum number of visible elements
• a layer that should always be visible identified by its place in the Array
So when invoking the function RandomShow and wanting the first layer in the Array to be visible it would be:
RandomShow (theArray, 1, 5, 0);
-for the layer array do I put in the actual layer names?
If you want to address a layer with teh name »Layer 1« by name (top level layers that is, layers in Groups are filial to the Group) you can use
myDocument.layers.getByName("Layer 1")
-If I currently have layers hidden, how would i tel it to not add those to be randomly shuffled and made visible (it was randomizing the texturemap and the other layer that is there for future reference into the compiled pngs)
Whether a Layer is visible or not is irrelevant in the curren tform of the Script, the Layers are addressed in the Array.
Introducing a check for visibility would be possible, but make the function a bit more convoluted as this would also affect the maximum number for example.
I don’t think I answered all questions, but maybe you’ve made progress on your own already and you can always post again if matters are still unclear.
Maybe the function is more complicated than it would need to be or maybe it will not be able to accomodate all your needs currently, but one could for example extend the baseLayer argument to an Array itself to have more than one element (either Layer or another Array) that will always be visible … there are still possibilities but the issue might be a bit complicated.

Multiple regions with parent child info.

I have the need to display parent-child-details on the same page - but more intuitively in 3 regions of a page.
As an example, i want the first region to display a list of departments, the second adjacent region to display employess in a department chosen in the first region, and the third should have employee details for a chosen employee in the 2nd region.
The master details approach may not necessarily fit as an elegant solution.
Any ideas/suggestions/past apps built that would be similar ?
Regards,
Atul

Docster wrote:
Hi,
Do you happen to still have this application? I'd love to see it.You are totally wasting your time. There is no point in posting follow-ups to threads this old in the expectation that the original participants will respond—watches on threads that will generate email notifications of thread updates last for only a period of a few weeks.
"Sofie87" is not listening. Gone. An ex-poster. Look at their profile: not posted in *4+ years*.
Posting follow-ups to ancient threads/departed users is NOT an effective way of getting help:
<li>Other users may ignore the thread if it is closed.
<li>Your assumption that the questions are related may be incorrect, leading to confusion about the nature of the problem and potential solutions.
<li>Watches on the thread will have expired, so the original participants are totally unaware of the new post. They may no longer be active on the forum.
<li>You have no ability to mark posts as helpful or correct.
Post your requirements as a new thread, including at least the following information:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Links to related posts and threads (using the methods in the FAQ)

Multiple Regions with Spry?

I'm using the Spry fade effects to pull in some content in a
div located in that page. Is there any way to call the fade on two
seperate divs at one time. Essentially so when the user clicked on
the link it would load new content into two divs.
Here's the code I'm using :
onclick="fadeIt('artWork','subpages/track1.html'); return
false;">

function fadeIt(ele,url,id){
Spry.Effect.DoFade(id',{ duration: 500, from: 100, to: 0,
finish: function() {
Spry.Utils.updateContent(ele, url, function() {
Spry.Effect.DoFade(id,{ duration: 500, from: 0, to: 100 });
onclick="fadeIt('artWork','subpages/track1.html','artWork');fadeIt('div2','subpages/page2. html','fadediv2');
return false;"
fadeIt('element for update content','thecontent for the
element.html','the id of the element to fade')
That would do :)

Multiple regions with fixed length

Hi
I have two regions on a page arranged in two columns. The size of the regions increasing/decreasing according to the data values we have selected. I want that width of regions to be fixed. How can I do it?
Regards
PMR

Hi PMR,
Edit your regions and in the "Attributes" section, "Region Attributes" property set the value for the width like this:
width=500pxTake into account that the region will be wide enough at least to hold all the items it contains and that your region template has to have the substitution string #REGION_ATTRIBUTES#. If that's not the case, make a copy of the region template, edit the copy and add the substitution string in the template definition, and select the new template for your region.
Regards,
Sergio

Any way to add multiple regions to a dialplan

I want a single dial plan for my pool (which is centralied) but want to
have multiple Dialin Conferencing régions. Any way to have 1 dial plan associated with multiple dialin conf régions ?

Thx for the quick answer Kevin.
However i don't want to assigned multiple regions to a dialin access number, i'd like to assign multiple regions to a dialplan.
I want multiple regions with different numbers but do not want multiple dial plans.
Question is: 1 dialplan = 1 dialin region only ??
I think that my only option is to have a "north America" dialin region and assign my differant npa access numbers.

Exporting a QT with multiple channels?

Curious... Am I able to export / create a QT file with multiple audio channels embedded?
I've a project with multiple tracks of audio. Now, of course, I know how to "pan" a track left / right to create a project with discrete tracks.
But, what if I have multiple tracks (vo, sfx, and STEREO audio.) Is there a way to create QuickTime file (exported from FCPX) with MORE than TWO audio tracks? For example, can I create a file with mono'd VO on one track... mono'd SFX on another... THEN... stereo music on two separate tracks? (for a total of four tracks.)
Please advise, and thanks.

dastoelk wrote:
Luis, many thanx!!!! You mind posting a quick screen shot showing the setting for "Roles as Multitrack Quicktime Movie?" Again... awesome!
No problem!
Here it is. Note that you can create as many audio tracks as you want, and they can each correspond to one or more roles (or sub-roles).
In the example, three audio tracks will be created, one each for Dialogue, Music, Effects; but you can do any combination of roles and/or sub-roles as you please.

Recent issue on multiple PCs: Preview and Export flicker/banding/moire effect

Recently we discovered one of our PC's flickering and banding in the preview window during playback and on exports. Shortly thereafter, the same issue appeared on another workstation. What we are seeing is a variation of issues that include but are not limited to the following within the preview window and more importantly in our renders:
Flicker - Video changes in brightness
Moire effect - Can see a cross-hatch pattern during playback
Banding - You can clearly make out horizontal or vertical lines, or sometimes both.
Seeing layers beneath 100% opacity layers. When two layers are stacked with footage, you can see the footage below as if the top layer is at 97% despite the actuality of it being at 100%.
These issues exist on multiple machines with differing specs, in all projects. This is neither a project or machine-based issue. All effects removed from clips within the timeline; source footage looks great in standalone player. These issues occur with a new project with a blank color matte.
Just spent 3+ hours in live chat with an Adobe Rep who remotely team-viewed to see the same issues testing project base solutions to no avail. Everything was tested from render containers/codecs, local vs server, project managing, cache clearing, etc. These same projects did not exhibit these issues a week ago.
All of these situations lead me to believe that this is a Premiere issue, something changed with how Premiere is handling our files and this is a huge issue. We are unable to deliver finals to clients due to this problem.
Ticket # 0185909669

Ran some tests. Wiped everything with Creative Cloud Cleaner Tool. Reinstalled the previous iteration of CC (not 2014), version 7.0.0 base. The issue exists here as well. Updated it to 7.2.2, same thing. Wiped everything again with the cleaner tool, installed CC 2014 Base, 8.0.0 and had the same issue, updated to current version no difference. These issues did not always exist, this is of recent coming.
We are running multiple Windows 7 and 8 machines at 64-bit. Their hardware varies per computer and all produce the same results.
We are having to make all renders from ONE mac that does not exhibit the symptoms described in the first post. This is HUGELY restricting to our business and we are having to wait on queues of renders to deliver due to this.
Exact same issue in post here: Re: Weird Horizontal Interference in Exported Video (check out the YouTube link)
HELP!!!

How to export animated gif with transparent background and glow effect?

I've been having issues lately with creating animated gifs in flash. I finally figured out a way to export a gif with a transparent background but I'm now having an issue with it again because I'm using a glow effect. When the gif is exported the glow effect changes into a very poor quality and becomes less of a glow and more like a solid color. I've even exported a png sequence from flash and put it into photoshop then created a gif from there but I'm still having the same issue. Is there anyway I can properly export this in gif form so the quality is the same as when I test it in flash?
I've provided an image of what my issue looks like and the settings (I've messed around with the settings and this is the best I can come up with) . This is in photoshop but the result is similar in flash. The left one is what it originally looks like and the right is what it will look like after exporting. As you can see as I said before the glow changes into more of a solid color kind of like a border. Any help would be greatly appreciated, thanks in advance!

A GIF is limited to 256 colors while a glow effect likely wants to tie up thousands (let's just say 'lots') of variations of tone.

Exporting a template with multiple images

Let's assume I want to have a large print made at an outside commecial lab because my printer does not handle the size.
In the Print Module, is there a way to export a template with multiple images so that it can be sent to an outside lab for printing?
Or, is this not possible and I would have to design the template in Photoshop and send the file to the lab?
If Lightroom is not yet capable of this, it certainly seems like a worthwhile feature.

Thanks for sticking with this thread to help me.
I am on Windows and I do have PDF capability, the full Adobe Acrobat Professional.
I have been experimenting with your suggestions and, yes, saving it as a PDF and bringing it into Photoshop is a workaround. The images and Identity plate come into Photoshop as they appear in the template in Lightroom.
What doesn't appear in Photoshop is the whitespace(margins)around the images. They appear in the PDF, but they don't appear when I open the PDF in Photoshop. Is there a setting I'm overlooking in the PDF settings dialog that will correct this? Or, is this just the way importing a PDF works when it comes to margins? Must I always go to Image/Canvas size to get the canvas I want? Is there a way of not having to do this?

Export of multiple artboards with only artboards' name, doesnt save to desired folder.

when trying to export multiple artboards into files that only bear the separate artboards' name, i set up the export with the filenames with blank names so set to ".jpg" . i also choose a folder that they are to be saved to.
what happens now is weird: the files will have the folders' name as a basename and will be saved next to the folder, not inside folder.
can you people see this behaviour too?

You can rename the artboards there.
The name gets part of the file name on export.

Export multiple regions with effect

Similar Messages

Maybe you are looking for