Export ODI Mapping to Excel

Hello,
We are using ODI 11g, and we've managed to build the mapping between source and target.
We would like to know if it's possible to export the mapping we made to an Excel file ?
Thanks in advance,
Olivier

If you are good at repositories I advice you to write queries and export the results to Excel. In this way all you have to do is changing the intercace name and export the other interface.
I don't know exactly the table names in 11G but 10G, you need to use tables starting with SNP_POP%.

Similar Messages

OBIEE Report Export from Dashboard to Excel doesn't suppress the columns as

OBIEE Report Export from Dashboard to Excel doesn't suppress the columns as expected even after the properties are set to Suppress in the report. In Dashboard it is suppressed Properly but in the excel export it is not suppressed and values for the columns are repeated.
Added the following to the instanceconfig :
<Download>
<Export xsi:type="excel">
<DataValue>UseFormattedValue</DataValue>
<RepeatRows>false</RepeatRows>
</Export>
</Download>
But then could not restart services.The following error occured :
Util Logger] Exception occurred:
 Severity:1
 Type:PKN3saw9ExceptionE
 File:saxreader.cpp
 Line:681
 Message:Sax parser returned an exception.
Message: The prefix 'xsi' has not been mapped to any URI, Entity publicId: /oracle/ofm/instances/instance1/config/OracleBIPresentationServicesComponent/coreapplication_obips1/instanceconfig.xml, Entity systemId: , Line number: 43, Column number: 26
Edited by: 887111 on Mar 27, 2013 11:23 PM

Problem solved!!
 
See this part of the query:
 
if :P15_GESTOR_PROPIETARI='-3' then 
w:= w||' AND (("STASVWREPORT_TASQUES"."GES_GES_ID"=:GESTOR '; 
w:= w||'OR "STASVWREPORT_TASQUES"."GES_GES_ID_ESTA_ASSIGNADA"=:GESTOR)'; 
w:= w||'OR ("STASVWREPORT_TASQUES"."AGR_***_***_ID"=:P15_CANVI_DE_CLUB ';
w:= w||' AND "STASVWREPORT_TASQUES"."PUBLICA"=''S''))'; 
end if; 
 
when instead of :P15_CANVI_DE_CLUB I put a value (say ''EE'') it works correctly, finally I created an application item (ASSOCIAT) and when when I change :P15_CANVI_DE_CLUB I set :ASSOCIAT to the same value and the query is based on this application item:
 
if :P15_GESTOR_PROPIETARI='-3' then 
w:= w||' AND (("STASVWREPORT_TASQUES"."GES_GES_ID"=:GESTOR '; 
w:= w||'OR "STASVWREPORT_TASQUES"."GES_GES_ID_ESTA_ASSIGNADA"=:GESTOR)'; 
w:= w||'OR ("STASVWREPORT_TASQUES"."AGR_***_***_ID"=:ASSOCIAT '; 
w:= w||' AND "STASVWREPORT_TASQUES"."PUBLICA"=''S''))'; 
end if;

Reg: Exporting the data into excel in ADF 11g application.

Hi All,
We have developed an application in ADF 11g which retrieves the data from database in the form of table. Now we have a requirement to export that data into an excel sheet.
Can anyone please help us regarding this.
Thanks,
Harsha

Hi Harsha,
you can use <af:exportCollectionActionListener /> component to do that. Set the exportedId property to point to of the table. You have options to export all rows or only selected rows.
<af:commandToolbarButton text="Export All Rows to Excel" immediate="true"
 id="exportAll">
<af:exportCollectionActionListener type="excelHTML" exportedId="table"
 filename="export.xls"
 title="ADF Faces Export - All" exportedRows="all"/>
</af:commandToolbarButton>
<af:commandToolbarButton text="Export Selected Rows to Excel" immediate="true"
 id="exportSelected">
<af:exportCollectionActionListener type="excelHTML" exportedId="table"
 filename="export.xls"
 title="ADF Faces Export - Selected Rows"
 exportedRows="selected"/>
</af:commandToolbarButton>Good Luck,
Luc Bors

During export from Discover to Excel, Time Format changes to Number Format

Hi
I have a seconds column which is of number datatype. But in my report, I am converting the number in *0HH:MI:SS* format. For example, I have *4952534 seconds*. So my report is showing *1375:42:14* which is a Time Format. It looks good when I view the data in Discoverer Viewer or Plus. But when I try to export the data to Excel, the time format gets converted to *4952534 seconds*, which is creating problems. So can you suggest on how can I preserve the formatting during export to excel from discoverer.
Thanks
Sachin

Hi,
Excel will not implement the 0HH:MI:SS data format, it just gets the field as a number. You will have to format the field into text using the calculation from my previous post.
Rod West

Export from ALV to Excel - problem with numeric values

hi folks,
when exporting from alv to excel and we have negative values (and using an u.s.a. setting where . and , are different to r/3) negetive values are not shown correctly in excel.
when changing in win nt the regional settings to europe one's (e.g. germany) everything works fine.
any hints welcome,
kind regards
oliver

I guess this has something to do with the excel settings. In the control panel you have regional settings.try some options there. It might work.
Regards
Sudhi

Hyperion Web Analysis Studio - Excel Export Data PATH TO EXCEL

I have a problem with Hyperion Web Analysis Studio by Export Data (Path to Excel) function on every client (windows Vista - IE 7 - Office 2007)
The problem is when I try to use the Export data to Excel, the Path to the excel program is missing and I have to go manually over the directory and choose the excel.exe to export the report, when I restart the IE I have to do it again...
Hyperion support suggested I try adding the Excel path to my webanalysis.properties file
So I now have:
ExcelPath=C:\\Progra~1\\Micros~2\\OFFICE12\\EXCEL.EXE;C:\\Progra~1\\Micros~2\\OFFICE12
EXCEL.EXE
WordPath=C:\\Progra~1\\Micros~2\\OFFICE12\\WINWORD.EXE;C:\\Progra~1\\Micros~2\\OFFICE12
WINWORD.EXE
PPTPath=C:\\Progra~1\\Micros~2\\OFFICE12\\POWERPNT.EXE;C:\\Progra~1\\Micros~2\\OFFICE12
POWERPNT.EXE
MaxDataCellLimit=200000
XLExportMaxRows=60000
XLExportMaxColumns=200
ResolveDimSetAliases=false
ExportDataFullPrecision=true
To me this does not seem the way to go
This did not correct my problem.
Any ideas?
thanks
Erich

Hello,
Even we have the same issue.And changed the path in webanalysis.properties file.And it worked in entire report but in drillthru reports, export to excel 2010 didn't work and prompting to select the path to excel.Does anyone has solution for this??

Export the Report in Excel format

Hi,
How to export the Report in Excel format directly from the SAP to my Desktop.
Plz. give me the process???
Thanks

use this,
INCLUDE OLE2INCL.
INCLUDE EXCEL__C.
AND
 H_EXCEL TYPE OLE2_OBJECT, " Excel object
 H_MAPL TYPE OLE2_OBJECT, " list of workbooks
 H_MAP TYPE OLE2_OBJECT, " workbook
 H_ZL TYPE OLE2_OBJECT, " cell
 H_F TYPE OLE2_OBJECT, " font
 H TYPE I.
AND
PERFORM SUB_GET_DATA.
 'get data here
PERFORM SUB_POP_DATA.
 'populate data here
AND
PERFORM SUB_DISP_EXCEL.
*& Form SUB_DISP_EXCEL
FORM SUB_DISP_EXCEL.
 START EXCEL
CREATE OBJECT H_EXCEL 'EXCEL.APPLICATION'.
SET PROPERTY OF H_EXCEL 'Visible' = 1. " for printing o/p line by line in excel sheet
get list of workbooks, initially empty
CALL METHOD OF H_EXCEL 'Workbooks' = H_MAPL.
add a new workbook
CALL METHOD OF H_MAPL 'Add' = H_MAP.
output column headings to active Excel sheet
PERFORM FILL_CELL USING 1 1 1 10 'Mat Doc Number'(001) 'R'.
PERFORM FILL_CELL USING 1 2 1 4 'Item'(002) 'R'.
PERFORM FILL_CELL USING 1 3 1 10 'Mat Doc Date'(003) 'R'.
PERFORM FILL_CELL USING 1 4 1 10 'Vendor'(004) 'R'.
PERFORM FILL_CELL USING 1 5 1 20 'Mat Doc Item amount'(005) 'R'.
PERFORM FILL_CELL USING 1 6 1 15 'Material price'(006) 'R'.
PERFORM FILL_CELL USING 1 7 1 4 'Currency'(007) 'R'.
PERFORM FILL_CELL USING 1 8 1 18 'Material'(008) 'R'.
PERFORM FILL_CELL USING 1 9 1 30 'Material Desc'(009) 'R'.
PERFORM FILL_CELL USING 1 10 1 19 'Qty in Unit of Entry'(010) 'R'.
PERFORM FILL_CELL USING 1 11 1 19 'Qty Received'(011) 'R'.
PERFORM FILL_CELL USING 1 12 1 4 'Unit of Entry'(012) 'R'.
PERFORM FILL_CELL USING 1 13 1 20 'Mat Group'(013) 'R'.
PERFORM FILL_CELL USING 1 14 1 16 'Vendor Invoice'(016) 'C'.
LOOP AT T_OUT INTO W_OUT.
copy flights to active EXCEL sheet
 H = SY-TABIX + 1.
 PERFORM FILL_CELL USING H 1 0 10 W_OUT-MBLNR 'R'.
 PERFORM FILL_CELL USING H 2 0 4 W_OUT-ZEILE 'R'.
 PERFORM FILL_CELL USING H 3 0 10 W_OUT-BLDAT 'R'.
 PERFORM FILL_CELL USING H 4 0 10 W_OUT-LIFNR 'R'.
 PERFORM FILL_CELL USING H 5 0 20 W_OUT-DMBTR 'R'.
 PERFORM FILL_CELL USING H 6 0 15 W_OUT-NETPR 'R'.
 PERFORM FILL_CELL USING H 7 0 4 W_OUT-WAERS1 'R'.
 PERFORM FILL_CELL USING H 8 0 18 W_OUT-MATNR 'R'.
 PERFORM FILL_CELL USING H 9 0 30 W_OUT-MAKTX 'R'.
 PERFORM FILL_CELL USING H 10 0 19 W_OUT-ERFMG 'R'.
 PERFORM FILL_CELL USING H 11 0 19 W_OUT-WEMNG 'R'.
 PERFORM FILL_CELL USING H 12 0 4 W_OUT-ERFME 'R'.
 PERFORM FILL_CELL USING H 13 0 20 W_OUT-WGBEZ 'R'.
 PERFORM FILL_CELL USING H 14 0 16 W_OUT-XBLNR 'C'.
 CLEAR W_OUT.
ENDLOOP.
CALL METHOD OF H_EXCEL 'Workbooks' = H_MAPL.
CALL METHOD OF H_EXCEL 'Worksheets' = H_MAPL." EXPORTIN G #1 = 2.
SET PROPERTY OF H_EXCEL 'Visible' = 1.
PERFORM ERR_HDL USING 'Unable to create workbook'.
add a new workbook
CALL METHOD OF H_MAPL 'Add' = H_MAP EXPORTING #1 = 2. "----------can remove-------THIS IS FOR STAY AT LIST
PERFORM ERR_HDL USING 'Unable to create new workbook'..
FREE OBJECT H_EXCEL.
PERFORM ERR_HDL USING 'Unable to free workbook'.
ENDFORM. " SUB_DISP_EXCEL
 FORM FILL_CELL *
 sets cell at coordinates i,j to value val boldtype bold *
FORM FILL_CELL USING I J BOLD COL VAL I_HORIZON_ALIGN.
CALL METHOD OF H_EXCEL 'Cells' = H_ZL EXPORTING #1 = I #2 = J.
PERFORM ERR_HDL USING 'set cell object error'.
SET PROPERTY OF H_ZL 'Value' = VAL .
PERFORM ERR_HDL USING 'set value object error'.
GET PROPERTY OF H_ZL 'Font' = H_F.
PERFORM ERR_HDL USING 'set font object error'.
SET PROPERTY OF H_F 'Bold' = BOLD .
PERFORM ERR_HDL USING 'set bold object error'..
SET PROPERTY OF H_ZL 'ColumnWidth' = COL.
PERFORM ERR_HDL USING 'set columnwidth object error'.
IF NOT I_HORIZON_ALIGN IS INITIAL.
IF I_HORIZON_ALIGN = 'L'.
SET PROPERTY OF H_ZL 'HorizontalAlignment' = XLLEFT.
ELSEIF I_HORIZON_ALIGN = 'R'.
SET PROPERTY OF H_ZL 'HorizontalAlignment' = XLRIGHT.
ELSEIF I_HORIZON_ALIGN = 'C'.
SET PROPERTY OF H_ZL 'HorizontalAlignment' = XLCENTER.
ENDIF.
ENDIF.
PERFORM ERR_HDL USING 'set Alignment object error'.
ENDFORM. "FILL_CELL
*& Form ERR_HDL
 outputs OLE error if any *
--> p1 text
<-- p2 text
FORM ERR_HDL USING VAL.
IF SY-SUBRC <> 0.
 WRITE: / VAL.
 STOP.
ENDIF.
ENDFORM. " ERR_HDL

Export crystal report to excel with subreport

I have a report with two subreport, and the question is when I export the main report to excel ( data only ) there is no data in the excel file, but when I just export the subreport to excel ( data only ), the excel file shows all data correctly. Does anybody know a solution can resolve this problem? Thanks.

1. Add one more Report Footer by right clicking on the Report Footer and selecting insert section below
2. Put Subreport 1 in the Report Footer a i.e. RFa
3.Put Subreport 2 in the Report Footer b i.e. RFb
4.Export the report to Excel Data Only.
5. You should be able to see the data for both the subreports

Exporting Crystal report into Excel with code

I have written the following code to export crysal reports to excel. My problem is, when it exports number it adds the thousand seperator (,), but if I export the report from Crystal designer, it works fine. So I believe I am missing something in my code. Could some one help me with this? Any help is greatly appreciated.
       Dim xlApp As Microsoft.Office.Interop.Excel.Application
        Dim xlBook As Workbook
        Dim myReport1 As New ReportDocument
        Dim reportPath1 As String = ""
        reportPath1 = "C:\test\su.rpt"
        myReport1 = New ReportDocument
        myReport1.Load(reportPath1)
        Dim tmpExcelFile As String = ""
        tmpExcelFile = "C:\test\test.xls"
        myReport1.ExportToDisk(ExportFormatType.Excel, tmpExcelFile)

Hi Don,
Please provide
- Crystal Reprots version
- Visual Studio version
- Win or web app?
Try using 'ExportToStream' see if it reproduces the issue.
[1198587 - How to export a report to stream in C Sharp (C#) for Visual Studio .NET |http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333133393338333533383337%7D.do]
- Bhushan.

How to export a table in excel (in JSP)???

hi all,
I am using AJAX functionality in jsp to export a table into Excel.But i don't want to use it as it gives a hyperlink whereas i want a button which should work similar to hypelink.
I mean to say i want a saperate export button which should work similar to the hyperlink.
if anybody has any idea abt it....plz reply it soon.......

So what you want to do is redirect to a page when the user clicks the button?
So just put the button in a form with the action attribute set to wherever the hyperlink points now.
And in case the button is already a part of a form, then on the onClick() event of the button, change the action attribute of the form to this particular hyperlink target and then cause it to submit.
That ok?
Or do you want the Excel file you're generating to be sent to the browser causing it to popup a dialog asking the user to save or open? If so take a look here http://forum.java.sun.com/thread.jspa?threadID=5170452&messageID=9655276

How can I export the report to Excel or CSV format in Rational(Java)?

Dear all,Now I develop CR report integrate with Web application, I use Ratioanl(RAD) to develop. And I want to export the report to Excel/CSV format, but always failed.If I force it export CSV file in the system, when I use MS office to open this CSV file, the file content is bad.Could any one tell me how to achieve this? Many thanks!Steven

CR4E is bundled with RAD 7...actually to be clear it is a version of CR4E Professional. Users of RAD 7 will also get a dev/test license of CR Server as well as number of additional features to support developing applications against their BusinessObjects Enterprise or Crystal Reports Server systems. For more information regarding the RAD 7 launch you can read the press release here:<a href="http://biz.yahoo.com/bw/061205/20061205005363.html?.v=1">http://biz.yahoo.com/bw/061205/20061205005363.html?.v=1</a> I am hoping to do a webinar in January highlighting a number of the new features available with the IBM Rational Application Developer integration.As for RAD 6 support, unfortunately the CR4E toolkit does require Eclipse 3.2 support so it will not work with RAD 6. Regards, Sean Johnson (CR4E Product Manager) <a href="http://www.eclipseplugincentral.com/Web_Links-index-req-ratelink-lid-639.html">Rate this plugin @ Eclipse Plugin Central</a>

How can i export the data to excel which has 2 tables with same number of columns & column names?

Hi everyone, again landed up with a problem.
After trying a lot to do it myself, finally decided to post here..
I have created a form in form builder 6i, in which on clicking a button the data gets exported to excel sheet.
It is working fine with a single table. The problem now is that i am unable to do the same with 2 tables.
Because both the tables have same number of columns & column names.
Below are 2 tables with column names:
Table-1 (MONTHLY_PART_1)
Table-2 (MONTHLY_PART_2)
SL_NO
SL_NO
COMP
COMP
DUE_DATE
DUE_DATE
U-1
U-1
U-2
U-2
U-4
U-4
U-20
U-20
U-25
U-25
Since both the tables have same column names, I'm getting the following error :
Error 402 at line 103, column 4
alias required in SELECT list of cursor to avoid duplicate column names.
So How can i export the data to excel which has 2 tables with same number of columns & column names?
Should i paste the code? Should i post this query in 'SQL and PL/SQL' Forum?
Help me with this please.
Thank You.

You'll have to *alias* your columns, not prefix it with the table names:
$[CHE_TEST@asterix1_impl] r
1 declare
2    cursor cData is
3      with data as (
4        select 1 id, 'test1' val1, 'a' val2 from dual
5        union all
6        select 1 id, '1test' val1, 'b' val2 from dual
7        union all
8        select 2 id, 'test2' val1, 'a' val2 from dual
9        union all
10        select 2 id, '2test' val1, 'b' val2 from dual
11      )
12      select a.id, b.id, a.val1, b.val1, a.val2, b.val2
13      from data a, data b
14      where a.id = b.id
15      and a.val2 = 'a'
16      and b.val2 = 'b';
17 begin
18    for rData in cData loop
19      null;
20    end loop;
21* end;
for rData in cData loop
ERROR at line 18:
ORA-06550: line 18, column 3:
PLS-00402: alias required in SELECT list of cursor to avoid duplicate column names
ORA-06550: line 18, column 3:
PL/SQL: Statement ignored
$[CHE_TEST@asterix1_impl] r
1 declare
2    cursor cData is
3      with data as (
4        select 1 id, 'test1' val1, 'a' val2 from dual
5        union all
6        select 1 id, '1test' val1, 'b' val2 from dual
7        union all
8        select 2 id, 'test2' val1, 'a' val2 from dual
9        union all
10        select 2 id, '2test' val1, 'b' val2 from dual
11      )
12      select a.id a_id, b.id b_id, a.val1 a_val1, b.val1 b_val1, a.val2 a_val2, b.val2 b_val2
13      from data a, data b
14      where a.id = b.id
15      and a.val2 = 'a'
16      and b.val2 = 'b';
17 begin
18    for rData in cData loop
19      null;
20    end loop;
21* end;
PL/SQL procedure successfully completed.
cheers

500 internal server error while Export wedbdynpro content into Excel.

Hi Experts,
my requirement is export webdynpro content into excel sheet, so for this what i have did is
First step:
) created an Extneral library DC
2) imported the JARs to the libraries folder of the External Library DC project
3) Right-click on each of the JARs imported to the project and added them to the public part.
Second step:
1) Createed a new Reuse Web Dynpro DC
2) Created a new public part, selecting the "Can be packaged into other build results" option
3) extrcted the full content (folders and class files) to root folder
4) Imported the folders and files to the src/packages folder
5)binded the attributes, created 3 methods and writen the code for those methods.
Third Step:
1) created one more EXPORT EXCEL DC
2) ADDED LIB jar dc and Reuse DC IN used dc's
3) created usedwebdynpo component and binded attributes to Table VIEW and writen the code for exposing table values.
After this build and deployed i am getting clasnot found error
so what i have did now is
Fourth step:
1)Created "J2EE Library DC"
2) Refered "External Library DC" into J2EE Library DC.
3) Deployed "J2EE Library DC"
4) Refered this one in my Web Dynpro DC by giving Library Reference.
now when i deploy and run what happend i am getting
500 Internal Server Error SAP J2EE Engine/7.01
Application error occurred during request processing.
Details: com.sap.tc.webdynpro.services.sal.core.DispatcherException: Failed to start deployable object sap.com/export_file_excel_7.
Exception id: [00215E78C4C0006D00000AD9000E00F00004887F642A32FE]
Any one can tell what could be the problem.

Thanks for sharing the solution.

Table Header in freezed pane when exporting SSRS report to Excel

Hi,
I want table Header in freezed pane when exporting SSRS report to Excel.
Can I have the table header of tablix be present in freezed pane of excel.
Thanks,
Vivek Singh

Hi Vivek,
Please refer the following thread.
may be u get the answer.
How to freeze header pane in SSRS
Regards
msbilearning

Changing default color scheme when exporting ALV report to Excel spreadshee

Hi all,
We have a bunch of FI reports created using OOPS in abap. Each of the reports has the functionality to be exported to an excel spreadsheet. When exporting to Excel, the headers are a very dark brown color, making them difficult to read and it has been requested that they are shaded a lighter color. I have not defined any sort of color scheme within the report itself, and I was wondering if there was a way to change the color scheme when exporting the report to excel. Let me know if there is anything that can be done, thanks!

check ur fcat

Export ODI Mapping to Excel

Similar Messages

Maybe you are looking for