Export settings - 1080p Video at 24 bit audio ?

Hello,
I usually export my videos in the H.264 format, as I have read online that it is the simplest way to ensure the highest quality for YouTube (with the preset).
However, I am making a music video for someone and they claim that when I render the video in this format is makes the audio duller...
The audio file is 24-bit depth, I am fairly sure that when I am rendering in H264, it is making the audio 16-bit.
(I'll admit, I have no idea what '24 bit' means... I am just reading what it says on the export wizard.)
I have tried exporting in AVI, since it lets you choose 24-bit audio... however, I cant get it to 1080p.
Is there any advice in what format I should export in if I want to retain the 24-bit quality but not loose any video quality.
Thanks in advance, this problem has been really confusing me.
Sam

Thanks for your reply.
Just out of interest,
Here is my audio file.
Any idea what may be causing it to sound 'duller'.
(If it isnt the bit-depth)
I personally could not hear any difference, but the guy I am making it for could.
I think he works in professional sound, so there is a chance he may be using an external audio interface like you said.

Similar Messages

What QT7 settings do I use to export a 1080p video for playback on iPhone4? I'm using the iPhone to playback 1080p video on 1080p monitor. Is this possible?

Does anyone know what settings I should use to export a 1080p video for playback on iPhone4? I'm hoping to use the iPhone4 to playback 1080p video on 1080p monitor. Is this possible?
I have previously saved my .mov file as Apple TV, but the quality is reduced from 1920x1080 to 960x540. I was unable to sync the higher quality file to my phone (and am worried this is the limitation of the hardware). I added this file to iTunes, added to a playlist, and sync'd to my iPhone. The playback works but the resolution is obviously a lower quality.Is it possible to keep the higher quality for playback through a 1920x1080 hd monitor? Otherwise, would I be able to sync a 1920x1080 mov file to a new iPad or other device? Thanks in advance to your answers.

Does anyone know what settings I should use to export a 1080p video for playback on iPhone4? I'm hoping to use the iPhone4 to playback 1080p video on 1080p monitor. Is this possible?
No. Only the iPhone 4S, iPad3, and TV3 currently support 1080p30 content. Even then the 1080p30 playback support for your monitor may depend on how the device is connected. The iPhone 4 is limited to 720p30 playback.
Is it possible to keep the higher quality for playback through a 1920x1080 hd monitor? Otherwise, would I be able to sync a 1920x1080 mov file to a new iPad or other device?
Not on your current device. As previously stated, the latest generation of iPhone, iPad, and TV devices support a maximum 1080p30 playback capability but may be limited to lower resdolutions depending on your method of connection to your monitor. This information can be found on the Apple web site TechSpecs page for each respective device.

I have Adobe Elements 9 and I used to be able to export HD 1080p videos with no issue. But recently, when I export using H.264 MPEG or MPEG 2, which I normally used, the high resolution videos come out very choppy. How can i fix this?

I have Adobe Elements 9 and I used to be able to export HD 1080p videos with no issue. But recently, when I export using H.264 MPEG or MPEG 2, which I normally used, the high resolution videos come out very choppy. How can i fix this?

mr
Are you running the 9.0.1 Update of the program and on what computer operating system is it running?
Is your video card/graphics card driver up to date according to the manufacturer of the card?
Is your computer optimized, including maintenance of pile ups of preview files, conformed audio files, and conformed video files?
Do you have the latest version of QuickTime installed on your computer with Premiere Elements 9.0/9.0.1?
What are your project settings and what are the properties of your source media? When you say that "used to be able to export...." is that on the same computer, same brand/model/settings for the camera recording the video now in use, same Premiere Elements 9.0/9.0.1?
Where player are you using for the playback of these exports?
Please give us more details on the size of the projects (then and now) as well as details of the customized export settings in your Share/Computer/ route. Premiere Elements 9.0/9.0.1 is only a 32 bit application running in 32 bit or 64 bit system. Not sure if computer resources might be taxed more so now than before.
More later.
ATR

Best export settings for video for web

Can anyone give me some advice on the best export settings for a short video that is to be viewed on the web? I have some short, say 2 minute videos that need to be placed on a website and need a reasonable file size. What would the best Format and Preset options be in Premiere? Would it be helpful to utilize After Effects to reduce file size? Thank you in advance to anyone who has some advice!!

For now, it would be on my own website or a clients website. But there may
be another possibility, I have a client that already has some videos
available for viewing on their website, looks like they are YouTube videos
that play on their site, and there is an option to "Watch on YouTube". So I
guess I would love some recommended export settings for a straightforward
video clip on my website, and if I need to explore the YouTube preset in
Premiere, let me know. Thank you, I really appreciate your answers and
help!!

Can't export to 1080p video in iMovie

I've imported a video taken with my iPhone 4s into iMovie 11. I confirmed the video is actually 1080p. In iMovie I then select Share -> Export Movie, the only size available is "Large 720 x 540" or smaller. Since this was 1080p video to begin with, shouldn't I be able to export it as 1080p?
So, I searched and found a youtube video describing how to export 1080p video using QuickTime. I followed the video step by step, but when I got the the part to select H.264 format, that format was unavailable.
What do I have to do to export 1080p video?
I don't recall this being a problem in the past.

Hi
Im curious about this point. I recently imported some video from a 5S, the option on my mac said, import as large or original, when i checked orginal I got a warning saying it may lose quality on playback so I checked large. I want to keep the quality from the 5S so I can export to itunes and watch on my HD tv with apple TV, by checking large does that decrease quality or is it the correct default?
My macbook is non-retina so I am assuming the playback quality it refers to is on my mac. I have changed the default to original even with the playback warning - is this correct?

What are the best export settings for video with small text?

I am making videos of lectures (where slides show up next to a small video of a person talking). I would like the text to show up as legibly as possible, all while maintaining a small file size (smallest possible) and still maintaining quality. What would you recommend? The slides change every couple minutes or so, but I don't wnat to reduce the frame rate becuase I do have that small video in the corner. Which settings and format are best? Also, I'll be uploading this to Youtube.
THANKS!

Keep in mind that the small video in the corner does not require as high a data rate as a full screen video. So, if a full screen video requires, let's say 5Mb/s for a talking head, you might be able to get away with 2Mb/s or less for the entire frame with a little video and a lot of static slide. Also remember that the less motion in the video, the lower the bit rate can be.
Try it out.
Use the H.264 preset for YouTube at the same frame size as what you are editing, and then reduce the data rate to half normal. Export and check out the quality. Then halve it again and check the quality. Keep going until the quality is unacceptable then go up a little. Find your sweet spot.
It is subjective. You have to decide the lowest bit rate you personally can accept and still be confident that the client will be OK with it.

How do I change the Export settings for video to itunes.It is set at exporting at 128kbps I want a higher setting.can Someone please help me?

Hello can someone please help me?I am trying to export a video from garageband to itunes.The settings are set and the audio is 128kbps.I obviously want them higher at least 192.Where can i find that option on here for exporting videos?

The Three Best Alternatives for Security Questions and Rescue Mail
     1. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
     2. Call Apple Support in your country: Customer Service: Contact Apple support.
     3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

CS4 MPEG 2 export settings for video captured by sony cybershot dsc-w35

Hi,
I am trying to export a project (which contains video captured by my sony cybershot dsc-w35 digital camera) in MPEG 2 format (not sure if there is a better format I should be using, but I tried to do it in AVI before and the resulting file was way too large), and the resulting exported file always comes out with choppy video. The video capture settings for my cybershot camera (and thus the source video in my project) are:
- VGA (640 x 480)
- framerate: 25 fps
At the outset, I am using DV (only other option is HDV) as capture format, and I selected DV-PAL: Standard: 48 kHz as my Sequence preset. I have no idea if thi is the appropriate preset for me to be using, but it seems logical since its timebase is 25 fps and it says a 4:3 video ratio in the description, and almost every other preset seems to be intended for HD video and higher framrates or ratios, etc.
At the export stage, I select MPEG 2 format, and other than that I really have no idea what settings I should be using. I set the preset to Custom and under the Video section I switch the framerate to 25 and the pixel aspect ratio to 4:3. Everything else I pretty much leave the same.
Can anyone tell me why the export file always comes out choppy? (it is not choppy when I watch it in Premiere itself). I must be either using the wrong preset at the beginning or in the export stage (or both). The VGA capture setting of my camera seems like it might be an issue as none of the presets in Premiere appear to accomodate it. Any help is sincerely appreciated!

Thanks for the prompt response, Hunt.
The spec sheet you referred to is actually for the Sony cybershot dsc-w350, whereas my camera is the sony cybershot dsc-w35. that's probably the reason for the discrepancy. When looking at the properties of the source video I am using it says 25 fps, so does this mean I should be using a PAL preset in the export stage? I see what you mean about using a Desktop (custom) preset for the sequence preset, and for this I set the framerate to 25, frame width to 640 and height to 480 (to match my camera settings), but what should I set the pixel width to?
In the export stage, I select custom preset again, but within this there are lots of options (mostly under the Video tab) I am unsure about. Should I be using PAL instead of NTSC since I'm using a 25 fps framerate? I can also scroll video quality anywhere from 1 to 5, any ideas? I can also choose various pixel aspect ratios here and then there are a bunch of bitrate settings I am totally cluseless about. Also, under the Multiplexer tab, there is an option between constant and variable bitrate types, which should I use? Thanks again

OMF and AAF exports -limited functionality now with 'raw' DSLR audio files.

I'm an post production sound mixer...and a film maker and thus I see PP CS5 from 2 sides. I'm using CS5 with a PC.
The industry uses OMF or AAF to export from a video workstation to an audio one. However PP CS5's OMF and AAF are both flawed.
I often had trouble exporting OMF's (from CS4) which failed without any reason popping up from the software. I usually believed this to be because of the OMF's restriction to 2Gb so I exported single tracks when I believe the source files are large...even when specifing say only 50 frame handles.
AAF more often worked with large files but the exports become large of course (that's OK) and all video material had to be deleted in the sequence before doing an AAF export.
I am now using CS5 and dropping my Canon 5D2 'H264' and Panasonic GH-1 'mts' files directly on the timeline instead of converting them to avi's with Neoscene. Great ...but alas all OMF's or AAF exports now fail....they will only work if I get my audio back to being wav files again, which isn't really viable once editing has occurred.
I know that OMF is fraught...Avid never made it easy but AAF is a more up to date exchange protocol. Could I request that this is investigated and an intermediate transcode to something like wav or AIFF be undertaken by Media Encoder when an AAF export is used? I assume that the encoder doesn't yet know how to process audio .movs or mts files into the required export audio file and just kills the process.
David Taylor Postfade Sound Pinewood Studios UK

Stan,
Thanks for the suggestion...I submitted a Bug Report.
I used both OMF and AAF to export from PP CS4 to my professional Fairlght DAW, which was happy with either, as long as the export was succesful. As I said there were occasional problems with OMF even though I selected small 'audio handles' for the 'embedded' OMF exports. My source audiofiles are often pretty big. AAF worked with these big source files however.
However I always used Neoscene to transcode my DSLR files before importing the Neoscene converted .AVI's into CS4, the audio was part of the new .AVI's and was probably now a .WAV.
Now with CS5 I can drop the Canon 5D2's 'H264. mov's' or the Panasonic GH-1's '.mts' video files directly into PP-which plays them beautifully.
My trouble now starts when I try and export the edited audio to my DAW. I can only get it to work with source files that are .WAV.
I don't think other professional users, like all those new PP CS5 machines at the BBC, will be happy with the compromised OMF/AAF exports either as so many of us are using DSLR's now.
David

Exporting from PPro CC - Exporting using Match Sequence Settings issue with 24 bit audio

I am having an issue exporting my sequence which contains final AIFF mix (24 bit 48 kHz) into a 'same-as-source' ProRes 422 file with 24 bit audio. I am specifically trying to export media with 'Match Sequence Settings' checked to create an identical output of what my sequence is. I wind up only creating a PR422 with 16 bit audio rather than 24 bit audio.
My sequence contains ProRes 422 media and 24 bit AIFF final stereo mix (1 audio file) from our Sound department.
My sequence is currently setup as "Custom" at 1920x1080, 23.976 fps, Square Pixels, Progressive, etc. Audio is 48 kHz (I don't see an option for choosing different bit rates in the 'Sequence Settings').
Using 'Match Sequence Settings', my options to alter the audio are "greyed out" and unavailable. I'm not sure why 'Match Sequence Settings' doesn't recognize that I am cutting with 24 bit audio and, instead, only exports 16 bit audio.

Always skip Match Sequence Settings and set up the export manually.

Audio upsampling in Quicktime Pro: Best export settings for Final Cut?

I'm using Quicktime Pro to convert audio from 32 kHz to 48 kHz, for use in FCE/FCP. Quicktime gives me several options for export settings. I want to make the conversion lossless, without increasing the size of the audio file too much.
These are the settings I'm using so far:
Format: Linear PCM
Channels: Stereo (L R)
Rate: 48 kHz
Sample Rate Converter Settings: Quality: Best
Linear PCM Settings: Sample size: 16 bits
Are these settings the best choices? Does anyone have experience doing this kind of upsampling?
Here are the other options in Quicktime:
Format: Linear PCM, A-Law 2:1, IMA 4:1, MACE 3:1, MACE 6:1, QDesign Music 2, Qualcomm PureVoice, and mu-Law 2:1
Channels: 2 Discrete Channels, Mono, Stereo (L R)
Rate: there are other choices, but I know 48 kHz is what I want
Advanced Settings:
Sample Rate Converter Settings: Faster, Fast, Normal, Better, Best
Linear PCM Settings (when Linear PCM is the format): 8 bit, 16 bit, 24 bit, 32 bit (floating point checked), 32 bit (floating point unchecked).
The file size grows quickly as you increase the Linear PCM bit settings.

You can't create something that is not in the file.
Moving from 32kHz to 48 will only make the file size
larger and can't improve the audio.
Doesn't FCP or FCE import your file at 32. Or does it
change it to 48 after import?
I am aware that increasing the audio from 32 kHz to 48 kHz will not improve the quality of the audio. And yes, Final Cut Pro and Express will both capture and allow you to work witih 32 kHz audio.
I have several hours of video shot with 32 kHz audio settings that I'd prefer to have stored on disk with 48 kHz audio, because (a) some applications like iMovie have demonstrated problems with 32 kHz audio in the past, and (b) the majority of my video is shot with 48 kHz audio, so my 32 kHz video will eventually end up in a 48 kHz project, leaving the upsampling to Final Cut. Yes, I do eventually plan to burn my projects to DVD as well, but this isn't an immediate concern.
The problem with doing the conversion in Final Cut is this: Some of the people knowledgeable about Final Cut Pro and Express recommend doing the upsampling using Quicktime or another application, instead of using Final Cut, because Final Cut may not do as good a job as Quicktime. So my intention is to upsample the audio now in preparation for later projects. I don't completely understand why Final Cut wouldn't do as good of a job at upsampling, but a couple of experienced users in the FCP and FCE forums have independently corroborrated this.
Thanks to everyone for their helpful posts and responsiveness.
PowerMac G5 Quad 2.5 GHz 3GB RAM Mac OS X (10.4.5) NVIDIA GeForce 7800GT
Message was edited by: Anthony M Kassir MD

PP 5.5 - DNxHD Matched Sequence Settings exports washed out video

Just want to make sure I'm not missing something. We shot on Scarlet, and after color we got back 1920x1080 DNxHD files.
Im concerned because after conforming, I'm using Match Sequence Settings to export from Premiere and my export video is washed out and different than the original.
Here's the original DNxHD video that I got from our colorist. (all i did was change the filename)
https://www.yousendit.com/download/TEhXNU1KTlF6RS9xYk1UQw
This is the file Premiere spit out after using Match Sequence Settings (a little shorter because original clip had handles)
https://www.yousendit.com/download/TEhXNU1KTlE0b0R2WnRVag
Sequence Settings below. It's also worth it to note that even though I'm choosing 1080p 23.976 DNxHD 175 10-bit and clicking okay, whenever I click configure again under "Video Previews", the dropdown list has defaulted back to 1080i 59.94 DNxHD 220 10-bit. weird. 709 vs. RGB is not making a difference for me.
My Export settings, just for good measure. "Use Maximum Render Quality" isn't making a difference for me
Side by Side comparison. You can really see the difference in the hair above her left eye. Original has a bit more contrast.
I can get good looking exports using other codecs and settings, PhotoJPEG works pretty well, but I know in a lot of cases DNxHD is kind of a standard for finishing work, and up until now I've done mostly broadcast and I've never worked with this Avid codec before. This is our first project with this camera so I want to make sure I'm doing the post-color work correctly. Our colorist already kinda boned us by not haing a red rocket and basically forcing me to take this codec. I'm just wondering if there is some color management step or setting that I'm missing. I really need this export to match the original.
Thanks for all your help, hopefull i can learn something here

Have you tried comparing the footage from inside of Premiere? Put each of the before and afters over top of each other in Premiere itself and see if they look different. Honestly I downloaded your test file and played them from inside premiere right side by side and didn't notice the problem that I see occuring in your pictures. However I did notice a bit of aspect change or something. But nothing related to color.Anyways just try placing them in premiere and comparing them both from inside Premiere.
If just simply placing the files inside Premiere doesn't fix the issue to begin with. Then attempt to change your preview file format in premiere to something besides Quicktime.
But honestly in the pics you posted I can see a clear difference however when I pull both of your files from rapidshare into Premiere Pro on my windows machine using the standard mpeg preview codec I see no color differences.
Like Jim said though Quicktime can't be trusted for color accuracy it has several known gamma issues.

FCE export settings for higher quality video

Hello. I'm a self-schooled newspaper video features producer and relative newcomer to Final Cut Express, shifting from Premium Elements. I've just begun using it to upload videos to my newspaper's finicky web system, which will only accept .flv files of a certain size. My modus operandi has been to export my videos as large .avi files, using Quicktime conversion and DV/DVCPRO/NTSC, with medium quality, with 16 bit sound set at 32 Khz. Then I run that .avi through the Adobe Flash Media Encoder with a frame rate of 15 fps, deinterlacing and resizing the screen to 640 by 480. This procedure (outlined by our former video editor) produces serviceable web quality video (You can see video that results from using these settings at http://wvgazette.com/multimedia). So, two questions: 1) I have created an 8-minute FCE music video for my band and wish to export it at a higher quality (for use on Vimeo) than these newspaper settings. Which of them do I change so that a higher quality video results without waiting all night for a massive file to upload? 2) And wthere might I turn for guidance on better understanding the Sanskrit of FCE video export settings for newbies? Thanks for any help.
Douglas Eye
http://hundredmountain.com

The simplest way to produce good quality video for the internet is:-
1. File>Export Using QT Conversion.
2. The "Format" window should say, "QT Movie".
3. In "Use" select "LAN/Intranet" from the dropdown menu.
4. Click "Save" and when it has finished encoding, upload it.
Do not mess about altering audio settings, frame rates etc.
Using the above settings an 8 minute video would be encoded in around 20 minutes (depending on computer speed) and would be well under 100MB.
Is that too big?
Message was edited by: Ian R. Brown

AE11 AVCHD 1080p video support for Panasonic Lumix FZ200 - no audio on videos.

I have jsut installed Adobe Elements 11 trail edition with latest updates on Win 7 64-bit. I purchased a new camera Panasonic DMC-FZ200 which does 1080p video and stores file in AVCHD video format on the SD card. I imported my photos/video first time from my new camera and AVCHD video files are playing ok but there is no sound coming from the video.
Importing them into Windows 7 and using local windows playback - it works perfect.
What is wrong with AE11? Or what to tweak...
Long time user of AE since version 3.

sherveyj1
Are you dealing with a PAL or NTSC project. For now I will assume NTSC.
As Hunt has suggested, transfer your video from the camera memory card to a computer hard drive location.
Using Premiere Elements 11 Windows Add Media, import the video file into the opened new project to get it into Project Assets and from there dragged to the Timeline Expert view. Then go to Edit Menu/Project Setting and determine if the project settings reflect the properties of your 1080p60 footage.
In the Premiere Elements workspace, do you see waves in Audio 1 content? If so, go to Edit Menu/Preferences/Audio Hardware and ASIO settings to assure that everything that needs to be enabled is enabled.
If the situation remains the same, waves in the Audio 1 content, but no sound at playback of the Timeline in the Edit Mode monitor, then try deleting the Adobe Premiere Elements Prefs file
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
11.0
and in the 11.0 Folder is the Adobe Premiere Elements Prefs file that you delete.
Make sure that you are working with Show Hidden Files, Folders, and Drives active.
Please let us know if any of the above helped or whether the situation remains the same for your Panasonic footage in Premiere Elements 11 tryout, that is, video displayed but no audio heard and/or seen on Audio 1.
By the way, you are in the Expert view (not Quick view)?
Thanks.
ATR

Audio upsampling in Quicktime: best export settings?

I'm using Quicktime to convert audio from 32 kHz to 48 kHz, for use in FCE/FCP. Quicktime gives me several options for export settings. I want to make the conversion lossless, without increasing the size of the audio file too much.
These are the settings I'm using so far:
Format: Linear PCM
Channels: Stereo (L R)
Rate: 48 kHz
Sample Rate Converter Settings: Quality: Best
Linear PCM Settings: Sample size: 16 bits
Are these settings the best choices? Does anyone have experience doing this kind of upsampling?
Here are the other options in Quicktime:
Format: Linear PCM, A-Law 2:1, IMA 4:1, MACE 3:1, MACE 6:1, QDesign Music 2, Qualcomm PureVoice, and mu-Law 2:1
Channels: 2 Discrete Channels, Mono, Stereo (L R)
Rate: there are other choices, but I know 48 kHz is what I want
Advanced Settings:
Sample Rate Converter Settings: Faster, Fast, Normal, Better, Best
Linear PCM Settings (when Linear PCM is the format): 8 bit, 16 bit, 24 bit, 32 bit (floating point checked), 32 bit (floating point unchecked).
The file size grows quickly as you increase the Linear PCM bit settings.

You can't create something that is not in the file.
Moving from 32kHz to 48 will only make the file size
larger and can't improve the audio.
Doesn't FCP or FCE import your file at 32. Or does it
change it to 48 after import?
I am aware that increasing the audio from 32 kHz to 48 kHz will not improve the quality of the audio. And yes, Final Cut Pro and Express will both capture and allow you to work witih 32 kHz audio.
I have several hours of video shot with 32 kHz audio settings that I'd prefer to have stored on disk with 48 kHz audio, because (a) some applications like iMovie have demonstrated problems with 32 kHz audio in the past, and (b) the majority of my video is shot with 48 kHz audio, so my 32 kHz video will eventually end up in a 48 kHz project, leaving the upsampling to Final Cut. Yes, I do eventually plan to burn my projects to DVD as well, but this isn't an immediate concern.
The problem with doing the conversion in Final Cut is this: Some of the people knowledgeable about Final Cut Pro and Express recommend doing the upsampling using Quicktime or another application, instead of using Final Cut, because Final Cut may not do as good a job as Quicktime. So my intention is to upsample the audio now in preparation for later projects. I don't completely understand why Final Cut wouldn't do as good of a job at upsampling, but a couple of experienced users in the FCP and FCE forums have independently corroborrated this.
Thanks to everyone for their helpful posts and responsiveness.
PowerMac G5 Quad 2.5 GHz 3GB RAM Mac OS X (10.4.5) NVIDIA GeForce 7800GT
Message was edited by: Anthony M Kassir MD

Export settings - 1080p Video at 24 bit audio ?

Similar Messages

Maybe you are looking for