CS4 MPEG 2 export settings for video captured by sony cybershot dsc-w35

Hi,
I am trying to export a project (which contains video captured by my sony cybershot dsc-w35 digital camera) in MPEG 2 format (not sure if there is a better format I should be using, but I tried to do it in AVI before and the resulting file was way too large), and the resulting exported file always comes out with choppy video. The video capture settings for my cybershot camera (and thus the source video in my project) are:
- VGA (640 x 480)
- framerate: 25 fps
At the outset, I am using DV (only other option is HDV) as capture format, and I selected DV-PAL: Standard: 48 kHz as my Sequence preset. I have no idea if thi is the appropriate preset for me to be using, but it seems logical since its timebase is 25 fps and it says a 4:3 video ratio in the description, and almost every other preset seems to be intended for HD video and higher framrates or ratios, etc.
At the export stage, I select MPEG 2 format, and other than that I really have no idea what settings I should be using. I set the preset to Custom and under the Video section I switch the framerate to 25 and the pixel aspect ratio to 4:3. Everything else I pretty much leave the same.
Can anyone tell me why the export file always comes out choppy? (it is not choppy when I watch it in Premiere itself). I must be either using the wrong preset at the beginning or in the export stage (or both). The VGA capture setting of my camera seems like it might be an issue as none of the presets in Premiere appear to accomodate it. Any help is sincerely appreciated!

Thanks for the prompt response, Hunt.
The spec sheet you referred to is actually for the Sony cybershot dsc-w350, whereas my camera is the sony cybershot dsc-w35. that's probably the reason for the discrepancy. When looking at the properties of the source video I am using it says 25 fps, so does this mean I should be using a PAL preset in the export stage? I see what you mean about using a Desktop (custom) preset for the sequence preset, and for this I set the framerate to 25, frame width to 640 and height to 480 (to match my camera settings), but what should I set the pixel width to?
In the export stage, I select custom preset again, but within this there are lots of options (mostly under the Video tab) I am unsure about. Should I be using PAL instead of NTSC since I'm using a 25 fps framerate? I can also scroll video quality anywhere from 1 to 5, any ideas? I can also choose various pixel aspect ratios here and then there are a bunch of bitrate settings I am totally cluseless about. Also, under the Multiplexer tab, there is an option between constant and variable bitrate types, which should I use? Thanks again

Similar Messages

Best export settings for video for web

Can anyone give me some advice on the best export settings for a short video that is to be viewed on the web? I have some short, say 2 minute videos that need to be placed on a website and need a reasonable file size. What would the best Format and Preset options be in Premiere? Would it be helpful to utilize After Effects to reduce file size? Thank you in advance to anyone who has some advice!!

For now, it would be on my own website or a clients website. But there may
be another possibility, I have a client that already has some videos
available for viewing on their website, looks like they are YouTube videos
that play on their site, and there is an option to "Watch on YouTube". So I
guess I would love some recommended export settings for a straightforward
video clip on my website, and if I need to explore the YouTube preset in
Premiere, let me know. Thank you, I really appreciate your answers and
help!!

What are the best settings to use on the Sony Cybershot DSC HX1 for taking portrait type photos?

I have used the portrait setting on the SCN selection but always end up with fuzzy edges on my photos. Are there manual settings that I can adjust that would correct this problem? I have done every other techniqe that I can find to "stabilize" the camera and no matter how still I stand, I still end up with fuzzy edges. Any ideas?

Hi bethstange,
Welcome to the Sony Community!
May I ask if this fuzziness show up when you're not using the Portrait mode? Portrait mode will give you an image with a blurred background while the subject is sharpened. We don't recommend this mode when taking group shots as the subject in the center of the image will be the only one in focus. For everyday shots, we recommend setting the drive mode to Intelligent Auto. This setting will automatically detect and adjust the shooting settings for you. No need to change the Scene modes for different scenarios.
We recommend using the SCN modes when you intend to shoot a certain type of scenario without changing the type of subject. An example would be setting the camera to shoot Landscapes, this setting will give you a wider depth of field than shooting portraits of people.
More information about the camera is available here.
If my post answers your question, please mark it as "Accept as Solution". Thanks_Mitch

What are the best export settings for video with small text?

I am making videos of lectures (where slides show up next to a small video of a person talking). I would like the text to show up as legibly as possible, all while maintaining a small file size (smallest possible) and still maintaining quality. What would you recommend? The slides change every couple minutes or so, but I don't wnat to reduce the frame rate becuase I do have that small video in the corner. Which settings and format are best? Also, I'll be uploading this to Youtube.
THANKS!

Keep in mind that the small video in the corner does not require as high a data rate as a full screen video. So, if a full screen video requires, let's say 5Mb/s for a talking head, you might be able to get away with 2Mb/s or less for the entire frame with a little video and a lot of static slide. Also remember that the less motion in the video, the lower the bit rate can be.
Try it out.
Use the H.264 preset for YouTube at the same frame size as what you are editing, and then reduce the data rate to half normal. Export and check out the quality. Then halve it again and check the quality. Keep going until the quality is unacceptable then go up a little. Find your sweet spot.
It is subjective. You have to decide the lowest bit rate you personally can accept and still be confident that the client will be OK with it.

How do I change the Export settings for video to itunes.It is set at exporting at 128kbps I want a higher setting.can Someone please help me?

Hello can someone please help me?I am trying to export a video from garageband to itunes.The settings are set and the audio is 128kbps.I obviously want them higher at least 192.Where can i find that option on here for exporting videos?

The Three Best Alternatives for Security Questions and Rescue Mail
     1. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
     2. Call Apple Support in your country: Customer Service: Contact Apple support.
     3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

CS4: Best export settings for web delivery?

Greetings, all!
I recently upgraded to working with HDV footage in CS4 from working with SD footage in Elements 3, and have been struggling a bit with getting the best quality export from CS4/AME for delivery over the web.
I'm most concerned with exporting a best quality master that I can then transcode to m4v, flv, etc. So far, the best luck I've had is with a H.264 .mp4 export, but it's still not as clean as I'd like to see. I've also read that exporting as a Quicktime animation provides excellent results, but I'm having issues with Quicktime on my new PC (error -43 file missing, for one thing) and I've read a bunch of posts here that advise staying away from QT whenever possible. I'm working mostly with NTSC HDV 1440x1080 60i footage from a Canon XH-A1s, with some NTSC HD 1920x1080 30p and 24p footage from a Canon T2i thrown in sometimes. I don't mind shrinking my export down to 1280x720, but for my master I really want the cleanest possible video.
Any tips would really be appreciated.
Thanks!

Anybody have any tips???
Here are the specs I have been using so far.
Format: H.264
NTSC, 1280x720, 29.97 [fps], Progressive
AAC, 128 [kbps], 44.1khz, Stero
VBR, 2 Pass, Target 6.00, Max 8.00 [mbps]
Widescreen 16:9
Profile: high
Level: 5.1
What I get is a file that's about 250megs for a 5-minute video that looks pretty clean. What I'm really looking for is more like a 2.5gig file that's super clean. Back when I was shooting SD, I would export an .avi file as my master that would run about 1gig or so for a 5-minute file. I'm looking for a similar workflow now that I'm working in HD.
Any ideas?

What are the best export settings for a HD video in Premier Pro CS4?

Hi!
   I've been having so much trouble with this issue and it's something that continually frustrates my boss. I have a HD video the settings for it are
FPS 23.98
1920 x 1080, then a few lines down it says 1408 x 792
16 bit,
2 channels
48000 Hz
   What should the settings be when I make a new sequence?
             When I look at it in the window in Premiere Pro I have to contantly 'shrink' the image to fit the window, is that something I should be doing or does it indicate the sequence settings are incorrect?
But more importantly what should the export settings be? I exported a 4 minute long video and the size was 1 GB, I know that's too big.
I need to export it without loosing any quality and export another one that meets the Youtube and Vimeo limits on size.
Vimeo is 500 MB per week, sometimes I upload 4 videos per week. I think Youtube you can only upload 500 MB at a time.
I need to get smaller sizes with loosing the least amount of quality possible AND the best export settings for quality, so I guess I have 3 separate questions-
What are the best sequence settings for HD video?
What are the best export settings for HD without loosing any quality?
What are the best export settings for the size to come out around 500 MB with loosing the least amount of quality possible?
Thank You!
http://forums.adobe.com/thread/713070
On the above thread I used the 5th anwer, and it's going to take about 7 hours to export a 4 minute video :/

It Stands for "Coder Decoder."
Your format is like a container for your video file. Certain containers can hold certain codecs and not others. Other containers can hold other codecs. Sometimes different containers can hold the same codecs.
This might be a bad analogy but I'll give it a try.
A coffe cup (container) can hold pretty much any liquid you drink, where a red solo cup (container) won't hold scolding water. So, the coffe cup would be your container of choice most likely because it has the most options for liquids (codecs). But, you might want a red solo cup for just a single crappy beer at a party (a moderate quality streaming video on the web). In that case, you don't need all the optoins of another container.
In Premiere Pro CC H.264 is a Container and the Codec in one option. This has been streamlined for web distrobution of video to be played in browsers without things like Flash or special players.
Were as if you choose the QuickTime Container there are over 40 codec optoins (at least on my machine with additinal ones installed) but you may run into an issue where your browser doesn't support QuickTime playback.
I would say that your container is for compatability with players and your codec is taken into consideration when looking at the quality of the compression.
Yesteraday I wrote a blog entery on Exporting from Premiere Pro and found that the MPEG-4 codec inside of the QuickTime container gave me much richer colors than the H.264 container/codec option.
I posted the link before but here it is:
http://goo.gl/8GZq4i

Import/Export Settings for Canon T4i Video

Hey folks,
I'm new to Premiere and loving it, but I'm wondering what the best sequence settings, as well as export settings, will be for video captured from my Canon Rebel T4i camera.
I prefer to shoot either in 1080p with 24 fps, or 720p at 60 fps––what settings within premiere should I use when setting up my project, and what are some good export options for Youtube/Vimeo?
thanks!

FAQ: How do I choose the right sequence settings?
FAQ: How do I export a movie for YouTube, Vimeo, iPad, iPhone, or Apple TV?

Best export settings for HD video playback on computer?

I have shot my video on 1080p witha DSLR and edited it in premiere pro. I exported the video in .mp4 format.
Now i imported the video in after effects and added loads of animation. I want to export it to the best quality for playback ON COMPUTER ONLY. Which is the best export settings for this purpose.
I rendered it in .avi and my 12 minute video had a size of 55GB after render and did not play smoothly in the computer.. PLEASE HELP WITH THE BEST SETTINGS for the above purpose.

You messed up. You should NOT have rendered MP4 out of Premiere to use in AE. You're adding compression and quality loss in between stages. BAD video person!
The easiest thing to do would be to import your Premiere project in AE. That way it can use the original footage too. If, for some reason, you can't do that, you should render a lossless file out of Premiere. Speaking of lossless files, that's what you rendered out of AE. This page explains your large AE file issue.
Anyway, take that large file you render out of AE into the Adobe Media Encoder and render out your final compressed file. Either H.264 or WMV should work well for playback.

FCE export settings for higher quality video

Hello. I'm a self-schooled newspaper video features producer and relative newcomer to Final Cut Express, shifting from Premium Elements. I've just begun using it to upload videos to my newspaper's finicky web system, which will only accept .flv files of a certain size. My modus operandi has been to export my videos as large .avi files, using Quicktime conversion and DV/DVCPRO/NTSC, with medium quality, with 16 bit sound set at 32 Khz. Then I run that .avi through the Adobe Flash Media Encoder with a frame rate of 15 fps, deinterlacing and resizing the screen to 640 by 480. This procedure (outlined by our former video editor) produces serviceable web quality video (You can see video that results from using these settings at http://wvgazette.com/multimedia). So, two questions: 1) I have created an 8-minute FCE music video for my band and wish to export it at a higher quality (for use on Vimeo) than these newspaper settings. Which of them do I change so that a higher quality video results without waiting all night for a massive file to upload? 2) And wthere might I turn for guidance on better understanding the Sanskrit of FCE video export settings for newbies? Thanks for any help.
Douglas Eye
http://hundredmountain.com

The simplest way to produce good quality video for the internet is:-
1. File>Export Using QT Conversion.
2. The "Format" window should say, "QT Movie".
3. In "Use" select "LAN/Intranet" from the dropdown menu.
4. Click "Save" and when it has finished encoding, upload it.
Do not mess about altering audio settings, frame rates etc.
Using the above settings an 8 minute video would be encoded in around 20 minutes (depending on computer speed) and would be well under 100MB.
Is that too big?
Message was edited by: Ian R. Brown

Correct settings for HDV capture

Hi. I'm using Premiere CS5.5. I went on a few forums to get the correct settings for HDV capture.
I can record the footage fine. However I saw a few things which didn't seem right.
After capturing the HDV footage, the file was a .mpeg file. Secondly, the clip was 1 hour and 10 minutes and
it was only 11.3 GB. Does this sound right? A 55 minute .avi file is 11.6GB. I thought a HDV clip would be quite a large size file.
If this dosen't sound right, is there somewhere I could go to, to check that my settings are correct? By the way I'm filming and capturing with a Canon XHA1.
The footage is 1080i. HDV. I've exported it and it looks fine. Just want to make sure I've captured it correctly and to the best quality.
Thanks for your help.

The HDV format was advanced by Sony and others to use the same miniDV tapes used for SD. In fact, your Canon XHAI can record and play either without changing the tape transport speed.
Your observation in relative file sizes is due to the fact that HDV is highly compressed (MPEG), whereas, SD (AVI) is not as highly compressed. This is one of the reasons folks (such as Harm) don't consider HDV to be an edit format, but just a delivery format.
Note that what Harm was saying is symantics--you capture an analog source through a capture card that digitizes it. When you transfer a image file from HDV or SD, it is already digitized, so a bit-to-bit transfer occurs.

Best PE7.0 export settings for Youtube HD, Vimeo or Smugmug?

Hi all,
I'm really new to video editing and I can't find any recommendations on the best Premiere Elements 7 export settings for Youtube HD, Vimeo or Smugmug. It seems like most of them want you to upload in 1280x720.
My original source is 1920x1080 30p AVCHD from a Canon HF100. Obviously, I would like to keep it at the same frame rate. There doesn't appear to be a preset in PE7 (or a way at all) to output 1280x720 30 into an MPEG container with H.264 encoding. When I go into the advanced properties of a preset like "H.264 1920x1080i 30" or "MPEG2 1920x1080i 30" and choose 1280x720, I no longer have an option for 29.97 fps - the only options are 23.976 or 24 fps. It seems bad to change this, right?
I see the preset for "HD 720p 30" which appears to be MPEG encoding of the video stream instead of H.264. This seemed to work OK, but I wasn't sure about it, because when I choose it I see in the description a line that says TV Standard: NTSC. A number of web sites indicate that H.264 is preferred, but I don't really understand why.
I also found a way to do H.264 in a Quicktime container. This seemed a little suboptimal because you can't do variable bitrate. When I unselected the "select bitrate" checkbox, it seemed like a quality of 50 yielded a .mov file with a bit rate of 2.87Mb/s, and a quality of 100 yielded a .mov file with a bit rate of 26Mb/s. It is confusing to me how the quality setting affects the bitrate on the quicktime containers.
I'm leaning towards using the "HD 720p 30" preset and working with the bit rate choices, but am open to comments. What do others think?
And on a related question - assuming we choose the "HD 720p 30" preset as a starting point, given the 1GB file restriction at Youtube, it seems to make sense to choose a bitrate that allows both good quality and reasonable file size. I don't know much about whether VBR 1 pass, 2 pass or CBR would be best for this kind of online HD video. Google is a little unhelpful here: http://www.google.com/support/youtube/bin/answer.py?hl=en&answer=132461
This page (http://webvideotechniques.com/123/bigger-and-better-encoding-for-youtube-hd) seems to indicate aiming for a bitrate of 8Mbps with a minimum of 4Mbps, including 2 pass VBR.
So, basically, I'm confused and a little overwhelmed. I think I have solutions that work, but it's hard to tell. What does the greater community think? Thanks.

Thanks very much E Mann, that was a very helpful thread. I think it actually would apply for youtube as well. For other users, here's a direct link to the settings for Premiere Elements:
http://eugenia.gnomefiles.org/2007/12/08/exporting-with-adobe-premiere-in-720p/
Roughly, the answer is:
Quicktime container
Video codec: H.264
Quality: 80 (I used 100 and it just takes longer to encode)
Frame Rate: 29.97 (I guess if you are shooting in 24p, this might be different)
Bitrate: 5000 (I might try 8000)
Audio codec: AAC
Output channels: Stereo
Frequency: 48kHz
Now, my own personal changes to this recipe are:
Quality: 100 - takes longer to encode, no file size difference
Bitrate: 8000
Frequency: 44kHz (recommended by youtube)
One final note is that for Vimeo it appears you may have to try encoding in 29.97 or 23.97 and test to see which you like better. Apparently Vimeo caps fps at 24.
The nice thing about this is that you can get a quality video directly out of Premiere Elements and you don't have to pipe it through another program.

Export settings for high quality, high resolution screen cast

I am trying to use iMovie for editing some software demo screen casts, and while my movie looks dandy in iMovie shown full screen, my final export looks like there is a lot of compression and antialiasing going on.
I am starting with a 1920X1080 screen capture via iShowU HD Pro, using Animation as the compression type. For final output I am using the Export using QuickTime option, and I have tried MPEG-4 at Best Quality, H.264 with Best Quality Compression and Multi-pass Encoding, and both look pretty bad. Anyone have any recommendations on the best export settings for a screen cast? Especially one that I would ultimately like to make available cross platform as well as via iTunes?
Thanks,
Gordon

I understand iMovie 6 won't compress the import. Everyone complained when apple changed away from iMovie 6 and but a link to download ILife6 (no cost) but they have since removed the link. I am looking for ILife 6 myself to get an uncompressed import if you find it please post so I can get it too, thx dan

What is the best export setting for video on blogger

What is the best export setting for video from premeire to blogger.com or blogspot.com

I have not been able to find the technical limits/specs for the site Blogger or blogspot.com. That is why I made the post here thinking some Adobe users may have experimented already and come up with good export settings for AVI DV video to a format optimized for Blogger.

What are best Mpeg encoder settings for making DVDs?

In switching from PP1.5 to CS3 the procedure is different for making DVDs and we have to encode mpeg files that later get picked up by Encore DVD build proces. What are the best mpeg encode settings for making the DVDs?
Thanks,
Chuck Taylor

Question:
If you are doing a video that is small enough that you are not worried about size, what is the absolute best quality encoder settings? Would a Continous Bitrate result in a higher quality file generally? VBR is for trying to make a smaller file I assume.
I'm frustrated with even white letters on black titles that have some flicker. I just don't seem to get the smooth quality I desire.
Should I look at a different encoder?
If you output PP3 to an AVI and then import it into encore, isn't there a reduction of Q. due to the save to the AVI file?
thanks.

CS4 MPEG 2 export settings for video captured by sony cybershot dsc-w35

Similar Messages

Maybe you are looking for