Export the data with Alias from the alternative table using ODI

Hi!
How to export the data from Essbase with Alias from the alternative table using ODI?
Thanks.

Are you on 10.1.3.6.x? Then: http://john-goodwin.blogspot.com/2008/09/odi-series-part-2-agent.html
Are you on 11g? Then: http://john-goodwin.blogspot.com/2010/12/managing-odi-11g-standalone-agents.html
I will say with only a mild amount of shame and a large amount of gratitude that I installed both releases' agents through John's blog posts.
Regards,
Cameron Lackpour
Edited by: CL on Jun 4, 2012 5:48 PM
Whoops, had the same link in there twice.

Similar Messages

How the data is fetched from the cube for reporting - with and without BIA

hi all,
I need to understand the below scenario:(as to how the data is fetched from the cube for reporting)
I have a query, on a multiprovider connected to cubes say A and B. A is on BIA index, B is not. There are no aggregates created on both the cubes.
CASE 1: I have taken RSRT stats with BIA on, in aggregation layer it says
Basic InfoProvider     *****Table type      ***** Viewed at      ***** Records, Selected     *****Records, Transported
Cube A     ***** blank ***** 0.624305      ***** 8,087,502      ***** 2,011
Cube B     ***** E ***** 42.002653 ***** 1,669,126      ***** 6
Cube B     ***** F ***** 98.696442 ***** 2,426,006 ***** 6
CASE 2:I have taken the RSRT stats, disabling the BIA index, in aggregation layer it says:
Basic InfoProvider     *****Table Type     *****Viewed at     *****Records, Selected     *****Records, Transported
Cube B     *****E     *****46.620825     ****1,669,126****     6
Cube B     *****F     ****106.148337****     2,426,030*****     6
Cube A     *****E     *****61.939073     *****3,794,113     *****3,499
Cube A     *****F     ****90.721171****     4,293,420     *****5,584
now my question is why is here a huge difference in the number of records transported for cube A when compared to case 1. The input criteria for both the cases are the same and the result output is matching. There is no change in the number of records selected for cube A in both cases.It is 8,087,502 in both cases.
Can someone pls clarify on this difference in records being selected.

Hi,
yes, Vitaliy could be guess right. Please check if FEMS compression is enabled (note 1308274).
What you can do to get more details about the selection is to activate the execurtion plan SQL/BWA queries in data manager. You can also activate the trace functions for BWA in RSRT. So you need to know how both queries select its data.
Regards,
Jens

How the data is fetched from the cube for reporting

hi all,
I need to understand the below scenario:(as to how the data is fetched from the cube for reporting)
I have a query, on a multiprovider connected to cubes say A and B. A is on BIA index, B is not. There are no aggregates created on both the cubes.
CASE 1: I have taken RSRT stats with BIA on, in aggregation layer it says
Basic InfoProvider     *****Table type      ***** Viewed at          ***** Records, Selected     *****Records, Transported
Cube A     *****             blank                 *****           0.624305         *****          8,087,502        *****             2,011
Cube B     *****                     E   *****                      42.002653 *****                  1,669,126            *****                    6
Cube B     *****                     F *****                     98.696442    *****                  2,426,006       *****                    6
CASE 2:I have taken the RSRT stats, disabling the BIA index, in aggregation layer it says:
Basic InfoProvider     *****Table Type     *****Viewed at     *****Records, Selected     *****Records, Transported
Cube B     *****E     *****46.620825     ****1,669,126****     6
Cube B     *****F     ****106.148337****     2,426,030*****     6
Cube A     *****E     *****61.939073     *****3,794,113     *****3,499
Cube A     *****F     ****90.721171****     4,293,420     *****5,584
now my question is why is here a huge difference in the number of records transported for cube A when compared to case 1. The input criteria for both the cases are the same and the result output is matching. There is no change in the number of records selected for cube A in both cases.It is 8,087,502 in both cases.
Can someone pls clarify on this difference in records being selected.

Hi Jay,
Thanks for sharing your analysis.
The only reason I could think logically is BWA is having information in both E and F tables in one place and hence after selecting the records, it is able to aggregate and transport the reords to OLAP.
In the second case, since E and F tables are separate, aggregation might be happening at OLAP and hence you see more number of records.
Our Experts in BWA forum might be able to answer in a better way, if you post this question over there.
Thanks,
Krishnan

How to remove the DATA Provider(Query) from the WAD 3.5

Hi,
I want to remove the unused dataprovider(query) from the WAD 3.5,
How to delete the dataprovider.
Please suggest here

Go to HTML tab. You will see all the data providers on top. You can delete the unused ones there.

WD4A with ALV, populating the header with values from the table

I have WDA application that list schedule agreement headers in one ALV and when you select one the line items show in the second ALV2 below. We show quantity and net value in 13 monthly buckets beginning with the validity data. The function returns the month text in columns I want to change the header based on the months returned. So instead of QNTY1, QNTY2 it would be 01/2008, 01/2008 etc. But ALV2 is initialized when the page is built and if I change the ALV2 settings after the line item function call they are not updated. On the page. Is there anyway I can do this???
It tried put the code in the EXECUTE function method, and I tried WDMODIFYVIEW but the ALV is not refreshed.
Thanks
David

Thanks for your help, I know I am probably doing something dumb but it is driving me crazy.
I have debugged I can see the text change in the debugger but it doesn't show up on the screen. I removed the code from from the WDDOINIT. So am doing everything in the ONACTIONGETDETAIL to ensure that it is not being overwritten. I can change the 'number of lines', remove print button, change a field to an icon etc, but the column header doesn't change. If I put the same code in the WDDOINIT the column header does change. Everything else works in both places.
*First ALV config
    l_ref_cmp_usage =   wd_this->wd_cpuse_alv( ).
    IF l_ref_cmp_usage->has_active_component( ) IS INITIAL.
      l_ref_cmp_usage->create_component( ).
    ENDIF.
    DATA lo_interfacecontroller TYPE REF TO iwci_salv_wd_table.
    lo_interfacecontroller = wd_this->wd_cpifc_alv( ).
    DATA lo_value TYPE REF TO cl_salv_wd_config_table.
    lo_value = lo_interfacecontroller->get_model( ).
*activate extended functions of the alv.
    cl_salv_wd_model_table_util=>if_salv_wd_table_util_stdfuncs~set_all(
       r_model = lo_value ).
    lo_value->if_salv_wd_table_settings~set_visible_row_count( '10' ).
    lo_value->if_salv_wd_table_settings~set_selection_mode( '06' ).
    lo_value->if_salv_wd_std_functions~set_pdf_allowed( abap_false ).
    DATA lr_column_settings TYPE REF TO if_salv_wd_column_settings.
    DATA lr_column TYPE REF TO cl_salv_wd_column.
    DATA lr_column_header TYPE REF TO cl_salv_wd_column_header.
    lr_column_settings ?= lo_value.
    lr_column = lr_column_settings->get_column( 'VBTYP' ).
    lr_column->delete_header( ).
    lr_column_header = lr_column->create_header( ).
    lr_column_header->set_ddic_binding_field( if_salv_wd_c_column_settings=>ddic_bind_none ).
    lr_column_header->set_text( '200708' ).
*change column to icon
    lr_column = lo_value->if_salv_wd_column_settings~get_column( 'AUART_DESC' ).
    CREATE OBJECT lr_image.
    lr_image->set_source_fieldname( 'AUART_DESC' ).
    lr_column->set_cell_editor( lr_image ). "Display images in column
Thanks again.
David

I am not getting the data in Bex from the cube

Hi Experts,
i am not getting the data from the cube to Bex,
cube having the data, but i am not able to see this data in the Bex result area.
Can any one help me.
Best regards,
Bhaskar

Hi
In the manage cube, is reporting symbol is there for your requests
If you have any red requests delete them and refresh
If all requests having reporting symbols you may check the BEx without any filters or selection criterions
Regards
N Ganesh

How can I display the date and time from the playhead info as a subtitle ?

Is there any way it is possible to display the video capture data and time during playback. I have seen some discussion on creating subtitles to do this, it would be nice if one could simply add a Title template with display fields for playhead information so that it automatically gets created during rendering.
In case you are wondering why on earth anyone would want this, I would like to use this for display on multisport racing videos.
Thanks

There is a Date/Time title in the titles browser, does just what it says...

I am attempting to make a 2013 calendar from my 2009and wanted to transfer material but all the dates have disappeared from the caldendar pages. I know they must be there. How do I retrieve so I do not have to retype info.?

I am attempting to transfer material from a 2009 calendar project to my 2013 but seem to have lot the printed date info from the original project. Any idea How I might recover it?

Alright, I got the centering figured out, so this is what ive got so far-
   import javax.swing.*;
   import java.awt.*;
   import java.lang.Math;
    public class Memory extends java.applet.Applet
      private int xMouse;
      private int yMouse;
      private boolean mouseClicked = false;
      private boolean firstRun = true;
      private static final int WIDTH = 100;
       public void init()
         setBackground(Color.BLACK);
       public void paint(Graphics canvas)
         if(firstRun)
            buildBoard(4);
            firstRun = false;
         else
            displayGame(canvas);
            if (mouseClicked)
               displayHit(canvas);
               mouseClicked = false;
       public boolean mouseDown(Event e, int x, int y )
         mouseClicked = true;
         xMouse = x;
         yMouse = y;
         repaint();
         return true;
       public void update ( Graphics g )
         paint(g);
       public void buildBoard(int s)
       public void displayGame(Graphics canvas)
         canvas.setColor(Color.WHITE);
         for(int i =0; i < 400; i+= WIDTH)
            for(int j = 0; j < 400; j+= WIDTH)
               canvas.drawRect(i, j, WIDTH, WIDTH);
       public void displayHit(Graphics g)
         g.setColor(Color.BLUE);
         int x = xMouse / WIDTH;
         x *= WIDTH;
         int y = yMouse / WIDTH;
         y *= WIDTH;
         g.fillOval(x+30, y+30, 40, 40);
   }

The problem with downloading from the App store

Welcome. I have a problem with downloading and installing programs from the App Store. I am logged into the App Store, and when I click on install it does not react like the makings download eg OS X Maverics it kind of gets but nothing goes. Button is pressed install like and after a while returns to the state before clicking that is to this that I can to click to start the download or installation of.

I was checking on the iPhone does not. I wanted to install a new OS X Maverics first and I had an older OS X Lion write it and now wants to download the OS X Maverics and I can not, and the like to log into the App Store.

Can I acquire data with VB from my DAQCard without using Measurment Studio?

I have the Measurement and Automation Software on my computer and VisualBasic.NET. Do I need any other software if I am receiving 2 analog signals and outputing 1 analog signal on my NI DAQCard-6024E PCMCIA?

The short answer is yes, you can acquire data with VB.NET from your DAQCard without using Measurement Studio.
There are a variety of ways to do it. All of them require that you install either the Traditional DAQ driver or the DAQmx driver in addition to Measurement and Automation Explorer. The DAQ drivers are included on a CD or CDs with your hardware. They are also available on the quarterly National Instruments Device Driver CD.
1) You can use the Measurement Studio DAQmx .NET API. This is far and away the easiest API to use to program DAQ cards in VB.NET and C#. This API is included in the DAQ installer and does not require you to purchase Measurement Studio. However, without Measurement Studio you do not get the benefit of the DAQ Assistant integrated into Visual Studio .NET. The DAQ Assistant, when integrated into Visual Studio .NET, allows you to graphically configure your DAQ tasks, generates the code you need to configure your tasks, and generates a .NET user control (with user interface) that demonstrates how you use the tasks that you created. The caveat to this approach is that PCMCIA cards are not directly supported under DAQmx 7.0. There is, however, a beta versin of DAQmx PCMCIA support as described in this KB article.
2) You can use the .NET P/Invoke services to call the Traditional DAQ or DAQmx C API directly. See MSDN for more information about P/Invoke. If you choose the DAQmx API, you will need to install the beta of the PCMCIA support as described in this KB article. National Instruments does not provide any examples, language-specific documentation, or code generation for this method. You'll need to look at the C API documentation to see what to do.
3) You can use the Measurement Studio Traditional DAQ ActiveX controls. These are included in the DAQ installer and do not require you to purchase Measurement Studio.
The absolute quickest and easiest way to get started using an NI-DAQ card in VB.NET is through the DAQ Assistant and Measurement Studio Professional or Enterprise edition.
Your next best approach is to use the native .NET DAQmx API. This API was designed from the ground up to support .NET languages. There are examples written in VB.NET to help you get started.
If for some reason, you don't want to use the native .NET API (or your hardware is not supported under DAQmx), whether you use P/Invoke or the ActiveX controls is a toss-up. It depends mostly on whether you are already familiar with the C API or the ActiveX API.
David Rohacek
National Instruments

When i sync my pc with my ipod the data dont transfer from the pc

I have software Itune 10.7 and my new ipod gen.5 with ios 6.0.1
My problem is that I have loaded music and videos into my itune on my PC, when I then plug in my ipod tuch it sync but I am not able to find the music or videos on my Ipod ?

I have the same problem!

When will Apple fix the problem with Freezing from the new upgrade??

I've had it.
Everytime I try to burn or back up my iTunes songs the whole program locks up as soon as I click on any of the brun or back up icons. Haven't been able to find any answers to solve my problem here although Apples tech support insists on looking here. Come on Apple what gives??

No one here would know that. An announcement would need to come from Apple.

I want to connect my personal iPhone 4 to my work computer as my original computer died. I do NOT want the dates or contact from the Outlook Calender on my phone though it says I need to make a contact or it will delete what I have on my iPhone. ?? help!

So how can I sync and not lose my contacts/calendar, I am confused.

Another thing to remember is the phone is actually usable for 911 calls and maybe others. Not a real good idea. Especially for a child.
It would depend however on the age of the child.
Good Luck

How to submit the Data with Business rule auto executed with VBA in excel?

Anyone knows how can I submit the data into planning with the business rule auto executed in planning?
Currently, I am using HypExecuteCalcScriptEx () + HypSubmitData() in my program that auto executed the business rule prior saving the data into planning.
However when it try to run HySubmitData(), the Business rule window pops up again and ask user to run the business rule again.
Therefore, is there a way that I can submit the data with auto execute the business rule?
many thanks, highly appreciate !!!!!!

Hi Rafeek,
One solution is to set the column width after manually or programmatically refresh the PivotTable, for example:
Private Sub Worksheet_PivotTableUpdate(ByVal Target As PivotTable)
Dim ws As Worksheet
Set ws = Application.ActiveWorkbook.ActiveSheet
ws.Columns("A").ColumnWidth = 10
End Sub
Another option is to set the column width, then protect the columns from been updated by the user, before refreshing the PivotTable, unprotect the worksheet. For example:
Public Sub LockColumnA()
Dim ws As Worksheet
Set ws = Application.ActiveWorkbook.ActiveSheet
ws.Columns("A").ColumnWidth = 10
ws.Columns("A").Locked = True
ws.Protect "123"
End Sub
Public Sub UnprotectWorksheet()
Dim ws As Worksheet
Set ws = Application.ActiveWorkbook.ActiveSheet
ws.Unprotect ("123")
End Sub
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Send mail with attachment from the uploaded file

hi,
From a form thread i got the following code to send mail with attachment with the file uploaded from the file upload ui element.
public void onActionLoadFile(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActionLoadFile(ServerEvent)
     WDWebResourceType FileType = null;
     String FileName = new String();
          //get attribute info for context attribute 'FileUpload'
          IWDAttributeInfo attributeInfo =
               wdContext.getNodeInfo().getAttribute(
                    IPrivateEmailView.IContextElement.FILE_UPLOAD);
          //get modifiable binary type from the attribute info,requires type cast.
          IWDModifiableBinaryType binaryType =
               (IWDModifiableBinaryType) attributeInfo.getModifiableSimpleType();
          IPrivateEmailView.IContextElement element =
               wdContext.currentContextElement();
          //if a file in the 'FileResource' attribute exists
          if (element.getFileUpload() != null) {
               try {
                    String mimeType = binaryType.getMimeType().toString();
                    byte[] file = element.getFileUpload();
                    //get the size of the uploaded file
                    element.setFileSize(this.getFileSize(file));
                    //get the extension of the uploaded file
                    element.setFileExtension(binaryType.getMimeType().getFileExtension());
                    //NOTE: context attribute 'FileName' must not be set
                    //because the FileUpload-UI-element property 'fileName'
                    //is bound to it. Consequently the fileName is automatically
                    //written to the context after file upload.
                    //report success message
                    wdComponentAPI.getMessageManager().reportMessage(
                    IMessageEmailComp.SF_UPLOAD,
                         new Object[] { binaryType.getFileName()},
                         false);
                    FileType = binaryType.getMimeType();
                    FileName = binaryType.getFileName();
               } catch (Exception e) {
                    throw new WDRuntimeException(e);
          //if no file in the 'FileResource' attribute exists
          else {
               //report error message
               IWDMessageManager msgMgr = wdComponentAPI.getMessageManager();
               msgMgr.reportContextAttributeMessage(
                    element,
                    attributeInfo,
                    IMessageEmailComp.NO_FILE,
                    new Object[] { "" },
                    true);
          //clear the FileResource context value attribute
          //element.setFileUpload(null);
          String URL;
          URL = this.CreateAndGetPathFileUpload(
                              wdContext.currentContextElement().getFileUpload(),
                                                  FileName);
//          if (URL.length() == 1){
//               //ERRORE
     wdContext.currentContextElement().setPATHFileUploaded(URL);
    //@@end
public boolean send( java.lang.String subj, java.lang.String mess, java.lang.String dest, java.lang.String attach, java.lang.String FileName )
    //@@begin send()
     InitialContext ctx = null;
     Address[] address = null;
     Message msg = null;
     Session sess = null;
     MimeBodyPart bodyPart = null;
     Multipart mp = null;
     // "141.29.193.71" == milvl2ja.icn.siemens.it (SMTP di Siemens)
       try {
          Properties props = new Properties();
          props.put("domain","true");
          ctx = new InitialContext(props);
          sess = (Session) ctx.lookup("java:comp/env/mail/MailSession");
          msg = new MimeMessage(sess);
          IWDClientUser utente = WDClientUser.getCurrentUser();
          String senderEmail = utente.getSAPUser().getEmail();
          InternetAddress addressFrom = new InternetAddress(senderEmail);
          msg.setFrom(addressFrom);
          String EmailDEST = dest;
          InternetAddress addressTo = new InternetAddress(EmailDEST);
          msg.setRecipient(Message.RecipientType.TO, addressTo);
          msg.setSubject(subj);
//          if ((mess != null) && (mess.length()>0)) {
//                 msg.setContent(mess, "text/plain");
//            } else {
//                 msg.setContent("", "text/plain");
          //Gestione ATTACHMENT...
          String attachedFileName = new String(wdContext.currentContextElement().getFileName());
          boolean hasAttachment = (attachedFileName != null) && (attachedFileName.length() > 0);
          boolean isMultiPart = (mess != null) && (mess.length() > 1);
          //adding an attachment makes the message multipart
             if (isMultiPart || hasAttachment) {
                mp = new MimeMultipart();
                // add text parts
                  if (mess != null) {
                     for (int i = 0; i < mess.length(); i++) {
                       bodyPart = new MimeBodyPart();
                       bodyPart.setContent(mess,"text/plain");
                       mp.addBodyPart(bodyPart);
                //attach the file to the message if needed
                if (hasAttachment) {     // avoid the case with no text parts
                     bodyPart = new MimeBodyPart();
                       bodyPart.setContent("Allegato incluso nel messaggio.","text/plain");
                       mp.addBodyPart(bodyPart);
                       // the part with the file
                       FileDataSource fds = new FileDataSource(attach);
                       MimeBodyPart attachmentBodyPart = new MimeBodyPart();
                    attachmentBodyPart.setDataHandler(new DataHandler(fds));
                    //URL URLattachedFileName = new URL(attach);
                    //attachmentBodyPart.setDataHandler(new DataHandler(URLattachedFileName));
                       attachmentBodyPart.setFileName(FileName);
                       mp.addBodyPart(attachmentBodyPart);
                msg.setContent(mp);
             } else {
                if ((mess != null) && (mess.length() > 0)) {
                     msg.setContent(mess, "text/plain");
                } else {
                     msg.setContent("", "text/plain");
          //fine ATTACHMENT
          msg.setSentDate(new GregorianCalendar().getTime());
          msg.saveChanges();
          address = msg.getAllRecipients();
          Transport.send(msg, address);
       } catch (Exception e) {
             e.printStackTrace();
             return false;
       return true;
    //@@end
When i used the same code in my application i am gett ing error in many places..
1)FileDataSource fds = new FileDataSource(<b>attach</b>);
attach cannot be resolved
2)attachmentBodyPart.setFileName(<b>FileName</b>);
fliename cannot be resolved
3)byte[] file = element.getFileUpload();
type mismatch cannot convert sting to byte[]
4)element.setFileSize(this.getFileSize(file));
method getFileSize() is undefined
5)element.setFileExtension(binaryType.getMimeType().getFileExtension());
method getFilExtension() is undefined
6)URL = this.CreateAndGetPathFileUpload(wdContext.currentContextElement().getFileUpload(),FileName);
method CreateAndGetPathFileUpload() is undefined.
7)wdContext.currentContextElement().setPATHFileUploaded(URL);
from the above error i can understand that only i have got the part of the code.
Please send me the complete coding.
some method definitions are missing....
Please help me to send the mail with attachment from the file uploaded from the file upload ui element.
Thanks in advance,
shami.

hi,
I got this from the following link
Re: Attaching an excel file
plz help me ...
I am using 2004s with nwds 7.0.06.
also tell me what should be the type of the context variable FileUpload
Thanks in advance,
shami.

Export the data with Alias from the alternative table using ODI

Similar Messages

Maybe you are looking for