Export to Word, Text does not appear in Word document

I have created a document in Pages which needs a table as part of it. I need to convert it to Word for work but when I use the Export to Word function it creates the Word Doc file but the table is blank - no text in the table at all? (Other text outside of the table is created).
Apart from that the formatting is not as it should be and some text (outside of the table) is incorrectly placed on the Doc file.
My fall back up to now has been to export to pdf (which works perfectly) and email that, but that stops it being edited at work.
Where should I be looking to make sure the text in the table in pages is exported to the Word document?
Or amn I expecting too much?
I am using a retina iMac, Yosemite OSX. Thanks.

Pages v5 (any version) is none of the following:
Word clone
Predictable
Professional/business grade software
Complete
Entirely debugged
Thoroughly documented
Many have, and continue to report export problems with Pages v5. Since we cannot peer over your shoulder as you enter text in a table, or if you tried to make the table behave as if in MS Word, the best bet would be to drop Pages entirely and use MS Word in Office for Mac 2011 (update 14.4.7 or later). Then you will be able to stop gambling with document conversion, work in the native Word .docx format, and recover some lost productivity. Word, not Apple's Pages, is the corporate word processing standard — for a reason.

Similar Messages

I have installed the font Broadway on my computer and it works in Microsoft Word but does not appear in the font list in InDesign. How can I fix this problem?

I have installed the font Broadway on my computer and it works in Microsoft Word but does not appear in the font list in InDesign. How can I fix this problem?

Start by rebooting the computer. If that doesn't work, search for adobefnt*.lst and delete all instances where * becomes a 2-digit number.

BI Publisher Desktop 11.1.1.5 Does Not Appear In Word after install

I have a 2008 version of BI Publisher Installed against Word 2007 (Office Home and Student Edition) which works fine.
I de-installed this and installed the latest version but the BI Publisher tab does not appear in Word now.
I've repeated the exercise several times - I can install the older version and the plugin appears.
Any Ideas?
Mike
Edited by: mikelons on May 27, 2011 10:33 AM

I have a 2008 version of BI Publisher Installed against Word 2007 (Office Home and Student Edition) which works fine.
I de-installed this and installed the latest version but the BI Publisher tab does not appear in Word now.
I've repeated the exercise several times - I can install the older version and the plugin appears.
Any Ideas?
Mike
Edited by: mikelons on May 27, 2011 10:33 AM

I have a problem in exporting the video icon does not appear "share"

Hi,
I purchased the program motion 5 from Apple Store
But I have a problem does not appear Icon
I experimented with the trial version before to buy the full version
Now I am very disappointed because all attempts failed
I have read some of the solutions in this site but to no avail
Thank you in advance for helping me
Said

But I have a problem does not appear Icon " share "

In Export module, Simple watermark does not appear in my photos

I make it a habit to always place a simple watermark on all my photos during Export. When i was using LR3 this always worked, but when I recently updated to LR5.2 the Copyright watermark does not show in my photos. I tried several repetitions exporting to .JPEG files, making sure that the Watermarking box is checked. Still, the photos do not show the Copyright symbol and my name.
What is happening?

Jim,
Following your last post lthis is what I did:
1. In LR5.2, (Library) Export Module, I clicked on the "Export' box
2. In Export File the following shows:
     Metadata
     Include: All metadata
      "Remove location info" box checked
     Watermarking
     Watermark box at left checked, and selection checked for "simple copyright watermark"
In the iMac Pictures folder I looked up the exported file and it shows no watermark
When this same file is uploaded to Flickr, no watermark appears.
I am wondering if. under metadata, I should select "Simple copyright" instead of "All metadata."

Attribute does not appear in WEBUI document properties windows

I've created a classObject using the xml parser of Ifs' WEBUI:
<?xml version="1.0" standalone="yes"?>
<ClassObject>
<Name>ArquivoXsl</Name>
<Superclass RefType="Name">Document</Superclass>
<Description>Classe de Teste do arquivo de layout de Faturas</Description>
<Abstract>false</Abstract>
<Final>true</Final>
<Attributes>
     <Attribute>
<Name>usuarioCadastro</Name>
<Datatype>String</Datatype>
<Required>true</Required>
</Attribute>
     <Attribute>
<Name>operadora</Name>
<Datatype>String</Datatype>
<Required>true</Required>
</Attribute>
     <Attribute>
<Name>modeloFatura</Name>
<Datatype>String</Datatype>
<Required>true</Required>
</Attribute>
     <Attribute>
<Name>dataInicioValidade</Name>
<Datatype>Long</Datatype>
<Required>true</Required>
</Attribute>
     <Attribute>
<Name>dataFimValidade</Name>
<Datatype>Long</Datatype>
<Required>false</Required>
</Attribute>
</Attributes>
</ClassObject>
After that we've had to update the class with two new attibutes (String, not required) using the iFS Manager. But now, when i select a document (ArquivoXsl) the properties window in WEBUI does not show that attribute.
is there a bug in the iFS 9.0.1 version.
If i create a new class with all these attributes, the WEBUI show them all, even they've being null valued.
Thanks anyone!

Hi
Even after making the attributes as nav attribute in Master data they ought to be marked as navigation attribute on the infoprovider on which you are creating the report.
If the report is based on the cube that uses company code then you need to check it as navigational att in the cube and incase you have a multiprovider at the top of the cube then you again need to check this attribute as navigational in the multiprovider too.
Thus by making comp_code_zregion as nav att in the master data you will not see it in the report you need to make it as nav in the report as well as multiprovider incase the report is based on multiprovider
Thanks
Puneet

Text does not appear stretched in the output

Hi,
I have a requirement to show data as stretched text in the rtf output. I tried it by electing the data field in the rtf template and changed the spacing to 3 point in font tab. But when I preview it, the text appears normal.
Is there something which I am missing? Is stretch text supported in BI templates or not?
Thanks.

The HTML validator finds one problem that might be related:
http://validator.w3.org/check?uri=http://www.historicalfictionbybobturpin.com/upload_test/blog.html
''"Warning: Byte-Order Mark found in UTF-8 File. The Unicode Byte-Order Mark (BOM) in UTF-8 encoded files is known to cause problems for some text editors and older browsers. You may want to consider avoiding its use until it is better supported."''
I'm not sure if this is related or not, but it might be useful information for your programmers. I tested your link on my Linux computer, but I did not see any problem with the page using Firefox 5 or Firefox 6. (Perhaps the problem only affects Firefox on Windows computers.)

Acrobat PDF plugin does not appear in Word 2013

After I installed Acrobat XI Pro, I do not see the Acrobat tab in the Word 2013 ribbon bar. If I use Word 2010, I do see the Acrobat tab. Is this a bug in Acrobat XI Pro that will be fixed for Word/Office 2013?

Ok, both of you have proven how "smart" you are but have failed to answer the -basis- of the question "will Adobe fix or make compatible Acrobat 11 so the PDFMaker add-in will work with Office 2013?". I had initially responded to kangfamily to provide more information and confirmation that the issue does exist and that the incompatibility is with both Acrobat 10 and 11, not just with 11. I offered that it is an incompatibility with Acrobat's PDFMaker add-in and Office 2013, not a setting or other issue in either product.
Obviously Acrobat 11 was released before Office 2013 so Office 2013 will not show in their help pages. The base, underlying question is to Adobe and that is "Is Adobe going to release a patch/update/upgrade (pick your prefered word) to Acrobat 11 that will make the PDFMaker add-in compatible with Office 2013? And if they are, should we expect to see it soon?" This question is the same as when Microsoft released Office 2010 and Adobe released Acrobat 10 with initial compatibility only with the 32 bit version of Office 2010 but subsequently released a patch to Acrobat 10 to make it compatible with the 64 bit version. On that basis, the question should also indicate there are still the 2 versions of Office 2013 (32 and 64 bit) as well. Since neither of you work for Adobe, I don't think either of you can answer that question.
PS: I am not hijacking this thread but clarifying what is occurring by providing more indepth information about the incompatibility and clarifying what the base question is.

Exported Bookmarks to PDF does not appear in correct order (ex. 4.0 before 3.0)

Hi,
I'm working with InDesign CS5.5
I exported the TOC in a PDF format.
I the PDF document, bookmarks appear in a wrong numeric order.
Ex. 1.12 is before 1.11
Why? And how can have the bookmark in a correct numeric order.
Thanks in advance.

Hi,
I'm working with InDesign CS5.5
I exported the TOC in a PDF format.
I the PDF document, bookmarks appear in a wrong numeric order.
Ex. 1.12 is before 1.11
Why? And how can have the bookmark in a correct numeric order.
Thanks in advance.

A pdf file is converted to word. Then the word file does not take normal word formatting. Why?

Having trouble making the converted pdf to word file work properly under word commands and formatting that have worked for me
well in the past.
Please help.

Hi filesneedtowork,
If you're seeing some jumpy text, or having trouble clicking in where you want, it could be a font issue that's cauing problems.
Try choosing Edit > Select All, then Edit > Copy. Paste the entire contents into either a new Notepad file. Then repeat the same steps from within Notepad and paste the text into a new Word document.
Let us know how it goes.
Thanks,
David

The word "ORIGINAL" is not appearing in the print out of documents

Hi,
For some reason the word "ORIGINAL" does not appear in the print outs (A/R Invoice, etc) anymore. But the word "COPY" appears when we reprint the documents. We could not see any setting in SAP that relates to this, and no changes in the PLD has been made prior to this issue. What could we be missing?
Thank you,
eric

Hi Eric,
The "Copy" remarks will be printed if you print a printed documents. Sometimes documents automatically change into "Open-Printed" event if we not actually print it.
The solution is to chnge that remarks in the PLD to text "Original".
Cheers

App asks to have location services turned on but App does not appear in location list.

I start the EZ Word Cheats and it starts with the menu open. I click on Quick Import and a blue box appears with the message to turn on Location services in settings. I start the settings app, click Privacy, click Location Services, but EZ Word Cheats does not appear in the list of Apps that can have Location Services turn on. Shutting the iPad off or resetting it does not help.

I reset location services in Setting>General>Reset>Reset Location & Privacy and that fixed the problem. I need not need to restore from new. When I ran EZ Word Cheats after the resetting location services and then clicked on the Quick import under the menu, a message came up asking access to Photos instead of location services. This is the correct behavior since the program does need access to my photos but does not need Location services.

PO number not appearing in Purchasing Document number

Hi
I have posted a MIRO. PO number: 4500000013. Now when i see in FBL1N & vendor open items, PO number does not appear in Purchasing Document field. Let me know how to bring the PO number.
Edited by: Deepak Agrawal on Oct 8, 2009 11:50 AM

Hi,
The display of the purchasing document number for customers/vendors via the line item display is not possible. However, you can branch from the vendors/customers line item display into the document overview and there display the purchasing document number for the individual G/L account line items.
Regards,
Eli

Acrobat 9.5 - use Touchup text Tool to edit PDF. Updates do not display. But, if I "save as" Word doc, the edits appear in Word. This feature worked in earlier versions of 9.x patches.

Acrobat 9.5 - use Touchup text Tool to edit PDF. Updates do not display. But, if I "save as" Word doc, the edits appear in Word. This feature worked in earlier versions of 9.x patches.

I have a suspicion you're working with a scanned document that has had OCR run to recognize the text. The recognized text may be stored on an invisible layer above the image of the text, and that is what you're toucing up. It's invisible, so you don't see it, but retains the changes, so exporting produces the new edits.
When you run OCR to recognize scanned text,, try using the ClearScan option, instead of Searchable Text. See this help page on Acrobat (this is for version X, but still applies):
Adobe Acrobat X Pro * Recognize Text - General Settings dialog box
mh++

Today i purchased exportpdf. when converting from pdf to word doc, the text does not show up on word doc. what to do?

when exporting pdf into a word doc the text does not show up on new doc. what to do?

Hi hamsa142,
Is this problem specific to one file, or does it happen with any file that you convert to PDF? How was the PDF created (using what application)?
For starters you may want to disable OCR as described in this document: How to disable Optical Character Recognition (O... | Adobe Community.
Please let us know how it goes.
Best,
Sara

Export to Word, Text does not appear in Word document

Similar Messages

Maybe you are looking for