Exported videos not in high quality (Premiere Pro 2.0)

Hi, I'd like to ask for help. When i go to export a video in Premiere Pro 2.0 I get 2 options. Export with File>Export>Movie or File>Export>Adobe Media Encoder.
I have tested out a bunch of export settings and none of the settings (that I've tried) do make my video export in high quality.
Some settings make the video export in blurred low quality, some settings export the video in a way which my media players (VLC & Windows media player) have diffuculty playing back (slow/lagging, kind of like when a video editor has laggy preview) and some settings make the output video have weird lines on them & low quality.
So I want to ask:
1. Wich Project settings to I use for example a 720p video? (when i click "new project" I get a list of choiced and i think that the settings under "Adobe HDV" are the best (just like a friend of mine recommended) (http://s1162.photobucket.com/user/Doctorwhofan2012/media/NewProjectChoiceofSettings.png.ht ml)).
2. Wich method do I use when I want to export my video?
File>Export>Movie or File>Export>Adobe Media Encoder? (http://s1162.photobucket.com/user/Doctorwhofan2012/media/SeveralwaysofexportingtheVideo.pn g.html)
If i choose "Export>Movie" wich settings do I have to apply? (http://s1162.photobucket.com/user/Doctorwhofan2012/media/Export-Movie.png.html)
If I choose "Export>Adobe Media Encoder" wich settings do I have to apply? (http://s1162.photobucket.com/user/Doctorwhofan2012/media/Export-AdobeMediaEncoder.png.html)
Message was edited by: A. Oliver

What kind of file are you editing?
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/

Similar Messages

  • Canon fx 300 video not read by fcp, premiere pro reads fine?

    Attempted to import footage from Canon fx 300 to FCP X,(Imac computer) would not recognize, either from card reader or camcorder.  Canon utilities plays the video fine.  Opened in Permiere Pro and video displays.  How can I download video to be used by FCP X.  Using IMac Mavericks,

    Here is another, recent (and far shorter thread) on importing Canon MXF files after upgrading to 10.9.
    Canon has yet to update their plug-in, but when I tested last week, I found importing worked fine from a card reader. This was the case with the OP's experience after he adjusted his process.
    Although the thread is in respect to the XF100, the same should be true for the 300.
    Russ

  • Video- bzw. Audiolänge Premiere Pro CS6

    Hallo,
    habe folgendes Problem: Wenn ich Video- bzw. Audiodatein in Premiere Pro CS6 importiere, werden sie nur zu einem Bruchteil angezeigt.
    Importiere ich beispielsweise eine Wave-Datei von 5s, wird diese in Premiere auf ca. eine halbe Sekunde gekürzt.
    Wie kann ich das beheben?

    CS6 only uses ONE video card for previews. For exporting or transcoding the video card is not used at all, that is a CPU/memory/disk affair. Accept the fact that all of your Titans do not help at all. You would have been better off with investing in a better CPU, more memory and better disk setup.
    Four Bugatti Veyrons without gas do not run faster than a Toyota Aygo with gas.

  • Can you capture video from the internet, using premiere pro cc?

    trying to capture video from the internet, using premiere pro cc, is that possible?
    also - it keeps saying "video capture offline" - any solutions for that?

    I am going to go out on a limb and say that while it may be against the YouTube terms of service to download or scrape a video off of their service, there are times that I really don't care since it is for my personal use. Providing myself or my wife with entertainment that she can watch or listen to on her smartphone while on an airplane, or in a car traveling down the road, just doesn't bother my moral compass. Doesn't make it twitch in the least.
    Perhaps I am wrong. Perhaps I shouldn't do it. Tough. I do, and will continue to do so until the Google police come knocking on my door.
    This is pretty much the same argument that they tried to kill the VCR with. The simple act of time shifting was something that was considered wrong, and illegal, until people came to their senses.
    As for the editing capability, you might be surprised at the ways it is possible to download video that works just fine for what I use it for. Premiere Pro has no problems allowing me to edit out the parts I don't like, or just aren't funny, and the quality really doesn't suffer much at all.
    Now, with the exception of something I did for my two year old Great Niece, I have never used any video that I have downloaded for anything except a tutorial, or in her case, a Sesame Street song I used when I shot video of me reading her the Sesame Street book that I purchased.
    Would it be wrong to post downloaded video, intact or edited, for public consumption? Sure it would. No question about it.
    But please do not assume that everyone downloading video from the Internet is doing so for nefarious purposes, and I promise not to assume everyone is a perfect angel and is following all the rules.

  • Several video transitions are missing in Premiere Pro CC 2014.  Where are they?

    I recently upgraded to Premiere Pro CC 2014 from Premiere Pro CC.  I had been working on a project using several video transitions which were no longer available in Premier Pro CC 2104.  I thought maybe they would show up in a later update, but so far I have not seen my video transitions including several zoom transitions and others.  What happened?

    scroll down the page to
    Cross-platform support for video effects and transitions
    Adobe Premiere Pro Help | New features summary

  • What is the best video converter for high quality MPEG-4 for Apple TV?

    What is the best video converter for high quality MPEG-4 for Apple TV?

    Handbrake won't convert AVI files, But there are many more than those mentioned that will
    The choice of conversion software is a personal choice, I have around a dozen applications that will tackle AVI's, however VisualHub is not one of them, not because there is anything wrong with it but rather I have enough such applications in my arsenal already.
    I would use mpegstreamclip in most scenarios for what you are wanting to do but maybe not always. It is a good idea to have a few applications to choose from as not all do the same thing. mpegstreamclip has a few more options than some bog standard applications without becoming overburdening with choices.
    You might want to try a few applications yourself before deciding on the software for you. isquint is a free limited version of visualhub, you might want to give that a whirl to get a feeling for visualhub.
    Be aware though that quality conversions do not happen quickly, claims of being faster than other applications may well be correct, but are usually a trade off against quality. Again you need to choose your software to reflect your preferred balance between speed and quality.
    Here's how I use mpegstreamclip, http://web.me.com/gartside1104/z008/Mpegstreamclip.html but your AVI's may well be low quality, you shouldn't set the bitrate any higher than your source file and likely lower, you shouldn't increase the frame size either.
    Message was edited by: Winston Churchill

  • Improve video quality (Premiere Pro CS4)

    Hi everyone,
    I've been given an mpeg file that's really low quality, ie. it has a lot of compression artifacts. I wondered if there was a way to somehow improve the quality using premiere pro. I've never use this program before so would probably need basic instructions if there is a solution.
    Appreciate any advice.

    As John T. points out, once heavy compression has been done, there is no undoing it. The bits of data are just no longer there.
    Now, one can improve some aspects, but this is just making something bad, a bit less bad. Depending on the footage, a bit of Levels (not Auto-Levels), a bit of Highlight & Shadow (turn OFF Auto and then change the setting down quite a bit), Fast Color Corrector, perhaps Neat Video (optional plug-in from Neat Video), and then a touch of Unsharp Mask as the final. That might improve things a bit, but do not expect magic, as it is not going to happen.
    Good luck, and if there is ANY way to get back to before that MPEG compression, get that. You will be so much farther ahead.
    Hunt

  • Exporting 5.1 ac3 audio from Premiere Pro CS4

    Hi there,
    I wonder if anybody can help me out with exporting 5.1 ac3 audio from Premiere CS4 version 4.1.0?
    I have a 3min long HD 5.1 clip that I need to cut down to 60seconds and add fade transitions to. The final clip will be used in a media player with very specific spec - the clip needs to remain HD 1080p with a frame rate of 29.97 and a maximum CBR of 38. The audio must be 5.1 aac. The format can be mpeg 2 or h.264. The overall quality loss needs to be minimal.
    Up to now I have been cutting up footage that only needs to be stereo and I found the best way to to this while keeping quality was to use Prem Pro and export as mpeg 2 1080p 29.97, quality:5, bitratre: CBR 38, audio as mpeg layer 2 (as these clips were stereo only). These clips played back fine and looked great so I wanted to keep the 5.1 clip process as close to this as possible.
    So far all I have been able to get from Premiere Pro is an audio codec called DVD_LPCM which the media player will not recognise. I'm a bit of a novice when it comes to 5.1 audio so I may be doing something obviously wrong...
    - I have purchased the 5.1 surcode codec and its activated.
    - I have started a new AVCHD (I need 1920x1080) 1080p 29.97  project with a 5.1 audio master
    - The orignal file is an mpeg which I have pulled into PPro and selected Clip > Audio > Breakout to mono
    - I take the 6 mono channels in the project panel and put them into thier own mono tracks in the sequence.
    - the video I use is the original mpeg with the 5.1audio muted in the sequence.
    - When i select each track in the project panel and go to Clip > Audio > Source channel mappings, I see that track has already been allocated a source channel. So I go to the Audio Mixer panel and adjust the 5.1 panners for each tyrack according to what the Source Channel Mapping window has told me - Audio 1 is is L, audio 2 is R, audio 3 is LS, 4 -  Rs, 5- C and 6- LFE
    - I cut the video and all the mono track to the 60seconds I need and export using these settings:
    Video - exactly as before
    Audio -
    Format - Dolby Digital, Codec - SurCode, Audio Coding Mode: 3/1 (L, R, C, LFE, Ls, Rs - 5.1 Surround), LFE: on.
    The clip exports with DVD_LPCM 5.1 audio. Is it to do with the AVCHD preset? Could anyone help me get aac? Any help would be appreciated.
    Thanks in advance

    Using AME and the SurCode Plug-in, here's how the dialog screen looks for the Audio Tab in PrPro 2.0. It should be similar in CS4:
    You do have the Minnetonka SurCode DD 5.1 SS plug-in, right?
    Good luck, and hope that this is helpful.
    Hunt
    PS - note that in the screen-cap, I have composited the dialog box, as though it fully displayed, with no need to scroll it. Depending on your display, you may need to scroll, and your scroll bars will look different from what you see here - just ignore that part of it.
    Message was edited by: the_wine_snob - Added PS

  • Adding a RAID card to help speed up export (and other drive question) in Premiere Pro CC

    First of all, I have read Tweakers Page exporting section because that is where my primary concern is. First my questions, then background and my current and proposed configurations:
    Question 1: Will adding a hardware RAID controller, such as an LSI MegaRAID remove enough burden from the CPU managing parity on my software RAID 5 that the CPU will jump for joy and export faster?
    Question 2: If true to above, then compare thoughts on adding more smaller SSDs for either a one volume RAID 0 or smaller two volume RAID 0 to complement existing HDD RAID 5. That is, I'm thinking of buying four Samsung 850 Pro 128 GB SSDs to put in a four disk volume to handle everything (media/projects, media cache, previews, exports), or split it up into two volumes of two disks each and split the duties, or keep the four disk volume idea and put the previews & exports on my HDD RAID 5 array.
    The 850's are rated at SEQ read/write: 550/470 MB/s thus I could get around 2000/1500 MB/s read write in a four disk RAID 0 or 1/2 that if I split into two volumes to minimize volumes from reading/writing at the same time, if that really matters with these SSDs?
    The Tweaker's page made a few comments. One is splitting duties among different disks, rather than a large efficient RAID may actually slow things down. Since the SSDs are much faster than a single HDD, I'm thinking that is no longer accurate, thus I'm leaning toward the Four disk configuration putting OS & Programs on C drive, Media & Projects on D (HDD RAID 5), Pagefile & Media Cache on SSD (2-disk RAID 0) and Previews &Exports on 2nd SSD RAID 0 (or combine the two RAID 0's and their duties).
    Just trying to get a perspective here, since I haven't purchased anything yet. Any experience/stories, I would appreciate.
    My current drive configuration:
    My D drive is software RAID 5 consisting of four 1 TB Western Digital RE4 (RED) 7200 RPM HDDs with a CrystalDiskMark SEQ Read/Write of 339/252 MB/s.
    The C drive is SSD 500 GB (Samsung 840 (not Pro) and does 531/330 MB/s. My OS, Program Files and Page File are on C, and data/media files/project, etc all are on the RAID drive.
    Problem:
    Current setup allows for smooth editing, only the exporting seems slow, often taking between two and two and a half times the video length to export. Thus a 10 minute video takes 20-30 minutes to export. 15 minute video can take 30-40 minutes to export. The first 10% of the two-pass export takes under a minute (seems fast), but it gets slower where the final 10 or 20% can hang for many minutes like my system is running out of steam. So where is the waste?
    I have enabled hardware acceleration (did the GPU hack since my GPU isn't listed) and it may spike at 25% usage a few times and eat up 600 MB of VRAM (I have 2 GB of VRAM), otherwise it is idle the whole export. The CPU may spike at 50% but it doesn't seem overly busy either.
    Our timeline is simple with two video streams and two audio streams (a little music and mostly voice) with simple transitions (jump cuts or cross dissolves). We sometimes fast color correct, so that might use the GPU? Also, since we film in 1080 60P and export 1080 29.97 frames/sec, I think that is scaling and uses the GPU. I know without the GPU, it does take a lot longer. I have ruled out buying a faster GPU since it doesn't appear to be breaking a sweat. I just need to know if my system is bottlenecked at the hard drive level because I'm using software RAID and my disks are slow and will hardware RAID significantly reduce the CPU load so it can export faster.
    Our files are not huge in nature. Most our clips are several MBs each. Total project files are between 5 GBs and 10 GBs for each video with Windows Media File export being 500 MB to 1.2 GB on average. We shoot using Panasonic camcorders so the original files are AVCHD, I believe (.MTS files?).
    Considerations:
    1. I'm thinking of buying (and future proofing) an LSI Logic MegaRAID 9361-8i that is 12Gb/s SAS and SATA (because some current SSDs can exceed the 6Gb/s standard).
    2. I'm not replacing my current RAID 5 HDDs because not in my budget to upgrade to 6 or more large SSDs. These drives are more important to me for temporary storage because I remove the files once backed up. I don't mind a few inexpensive smaller SSDs if they can make a significant difference for editing and exporting.
    I can only guess my HDD RAID is slow but the CPU is burdened with parity. I would imagine running RAID 10 would not help much.
    My setup:
    my setup:
    CPU - i7-3930K CPU @4.5 GHz
    RAM - G.SKILL Ripjaws Z Series 32GB (4 x 8GB) DDR3 2133 @2000
    Motherboard - ASUS P9X79 WS LGA 2011
    GPU - Gigabyte GeForce GTX 660 OC 2GB (performed the compatibility list hack to enable hardware acceleration).
    C drive - 500 GB Samsung 840 SSD (Windows 7 Pro 64 bit and programs).
    D drive - four 1 TB WD RE4 Enterprise HDDs 7200 RPMs in software RAID 5
    Case - Cooler Master HAF X
    CPU Fan - Cooler Master Hyper 212 EVO with 120 mm fan
    Power Supply - Corsair Pro Series AX 850 Watt 80 Plus Gold
    Optical Drive - Pioneer BDR - 208DBK
    thanks in advance,
    Eric

    ........software RAID 5 off the motherboard ??????......NOT a good idea, from what I have read here on this forum from experts like Harm Millard and others. They have mentioned a LARGE overhead on the CPU doing this....causing sub-par performance. RAID 0 off the motherboard will NOT do this, however.....RAID 0 would provide optimum speed, but, with the risk of total data loss if ANY drive fails. You may wish to reconfigure your RAID to be RAID 0...BUT...you would need to DILIGENTLY back up its entire volume onto perhaps a quality 4TB drive very frequently.
         A lot depends on the nature of your current and FUTURE codecs you plan to edit. You may not want to sink a lot of money into an older setup that may have trouble with more demanding future codecs. For now, in the 1080p realm, your rig should be OK....the read/write performance on your CURRENT RAID 5 setup is not great, and a definite drag on the performance. The rest of your components appear to be fine.....the Samsung SSD, though not ideal, is OK.....it's write speed is WAY lower than the Pro model,but, the drive is used mainly for reading operations. Since you have Windows 7 Pro, and NOT Windows 8.......you CAN put the entire windows page file onto the RAID 0 you might create.....this will take that frequent read/write load OFF the SSD. Read the "tweakers Page" to see how to best TUNE your machine. To use your current setup most efficiently, without investing much money, you would :a. create the RAID 0 off the motherboard, ( putting all media and project files on it )  b. install a quality 7200rpm 4TB HDD to serve as a BACKUP of the RAID array. Then, install a Crucial M550 256GB or larger SSD, ( close in performance to Samsung 850 Pro...much cheaper), to put all previews, cache , and media cache files on....AND to use as " global performance cache" for After Effects...if you use that program. Exporting can be done to ANOTHER Crucial M550 for best speed...or, just to the either the FIRST Crucial or, the 4TB drive. Your current GPU will accelerate exports on any video containing scaling and any GPU accelerated effects. Your CPU is STILL important in SERVING the data to and from the GPU AND for decoding and encoding non-GPU handled video....your high CPU clock speed helps performance there ! You may want to check out possibly overclocking your video card, using MSI Afterburner.or, similar free program. Increasing the "memory clock speed" can RAISE performance and cut export times on GPU effects loaded timelines,or, scaling operations. On my laptop, I export 25% faster doing this. With my NEW  i7 4700 HQ laptop, I export in the range of your CURRENT machine....about 2 to 3 times the length of the original video. PROPERLY SET UP...your desktop machine should BLOW THIS AWAY !!
        Visit the PPBM7 website and test your current setup to possibly identify current bottlenecks,or, performance issues. THEN, RE-TEST it again, after making improvements to your machine to see how it does. Be aware that new codecs are coming (H.265 and HEVC,etc.) which may demand more computer horsepower to edit, as they are even MORE compressed and engineered for "streaming" high quality at a lower bandwidth on the internet. The new Haswell E...with its quad-channel memory, 8 core option, large number of PCI gen. 3 lanes, goes farther in being prepared for 4K and more. Testing by Eric Bowen has shown the newer PPro versions provide MUCH better processing of 4K than older versions.

  • How can I create a stop animation video with single images in Premiere Pro?

    Let me start off by saying I am 100% new to pretty much all Adobe software as of about 3 weeks ago. I have been doing a lot of googling these past few weeks. With that said, I will do my best to explain my question.
    I am making a stop motion animated video.  I am not using several photos to create the look, but rather single photoshopped images that I have deleted the backgrounds out of. Basically the video is single charms "crawling" or flying in individually from off screen into a circle, there is a story explaining what each charm means. I started in After Effects, but had issues with audio... am I right in my understanding that you cannot preview the audio unless you use the preview feature? So my solution was playing a guessing game, rendering/exporting, importing it to Premiere Pro, taking notes and then heading back to After Effects to try to re-do the timing. Obviously this was not working too well.
    Then after doing more googling and clicking around I figured out you could layer images in Premier Pro and make them move just as you would in After Effects, which is great! There are two things hanging me up...
    1. I used the wiggle effect in After Effects. For the life of me I cannot find or figure out an effect or preset similar to this in Premiere Pro. Is there such a thing? Or do I have to create rotation keyframes? (I think I'm using keyframes correctly).
    2. Making the images stop-motiony and not smooth.
    My question is... any suggestions on how to re-create the wiggle effect easily in Premiere Pro? Or is there away to create the effect in After Effects and then import the image into Premiere Pro and still be able to change the position and timing?
    Please help! My deadline is tomorrow by the end of the work day!
    Please forgive me if these are silly questions... go easy on me, I'm soo new! Thanks in advance!

    Thanks so much for the reply!
    I read that... but it doesn't preview the whole thing? It only previews a few seconds and then loops. I tried to figure out how to change the preview settings, but I can't seem to get it to work.

  • D7000 files not working in Adobe Premiere pro CS6

    I recently took a lot of video on my D7000 DSLR. All of my video I shot though when I import them into Adobe Premiere "breaks" the file plays perfectly on the computer strait from the file but the miniute I try to import them into Premiere the files show either black screens or fragments of other screens in the playback windows as if the files were corrupted. I know that they are not. I need to know what I am doing wrong, if I am, since I am brand new to the program, and how to fix it. I have tried the origional .MOV file which I have reserched says works native with CS6. I also tried converting the file to .mpg. Both ways the files act the same. I have the settings for the project for DSLR at the proper resolution and frame rate also. I can hear the correct audio with the clip but simply the window is corrupted.
    I am using 15" Macbook Pro Retina base model.
    Thanks for any help.

    If you have the latest update for Premiere it contains updates for HiDPI display, which improves appearance on computers that use Retina Display, such as MacBook Pro computers
    http://blogs.adobe.com/premierepro/2012/09/premiere-pro-cs6-6-0-2-update-hidpi-for-retina- display-bug-fixes-and-new-supported-gpus.html

  • Recorded Audio Not playing back in Premiere Pro

    I use Dxtory to record; Sound from system as well as mutual programs such as skype all playback as intended. The audio from my microphone, though it plays back when reviewing it in a media program, is not present when I import it into Premiere. Still new to all of this. Any suggestions?

    Hi AkaDc,
    Though it was made for Premiere Pro CS6, this video tutorial should assist you:
    Hope it helps.
    Thanks,
    Kevin

  • What is the export format for Iphone and Android (Premiere Pro CS6)?

    For Iphone, Ipad and Android, what is the export format (Premiere Pro CS6) for watching videos ?

    http://forums.adobe.com/message/5950682#5950682

  • .mov files no video but has sound in premiere pro cs6

    I know this isn't adobe. However, all of my .mov files play with no video in quicktime, premiere pro cs6, and sony vegas 9. I've looked into the missing codec, and quicktime brings me to the general page with multiple codecs listed. This happens with two different types of cameras. Both HD. I have Windows 7. Does anyone know why the files won't play video? Thanks.

    jon - no idea why you were such a snarky SOB in your reply.  person was just asking for some help.  obviously stuck and could use some advise.  you could have chosen to ask a few clarifying questions to see if additional info could be gleaned.  instead you CHOSE to be mean.  NOT COOL.  if you hate being a support person, dont offer your help and dont go online.  otherwise, change your attitude.
    If you feel my comments were inappropriate, then feel free to report my post as such. If you feel the information was incorrect, then please provide what you feel to be more correct information. The object of my comments was to 1) point out that no accurate solution was possible without amplifying information, 2) inform the individual why more information was needed, and 3) describe at least three methods for getting the required information. It was not my intent to be either "mean" or "cool" but rather to teach the individual how to analyize their video content in order to become more self-sufficient in the future. Perhaps if you concentrated more on the content of my response than on your emotional interpretations of what you think was implied, you might find something of value.
    My question for you is,"Did you actually create a new profile tonight to hide your normal identity while you berate my response?"
    for lordrebeccasama - there are people out there that would like to help.  I would suggest you try to get answers to some of these questions and post - people may have some ideas:  Does this problem occur with all MOV files or just certain ones.  if just certain ones, can you ell which camera or source produced the file?  can you see if the files can be played on other machines (like another PC or a MAC)?  if you can, try to get into the properties of the MOV file (the container) and see if you can tell how it was encoded.  good luck - and on behalf of all people that actually like to help, i apologize on behalf of jon.
    Since you have essentially asked for the same information I did, albeit in a more indirect manner, I don't feel any apology is needed on my behalf.

  • Doesn´t Radilal Blur Video effect exist more in Premiere Pro CC 2014?

    Hello everyone! 
       I am studying an Adobe Premiere Pro guide, it is based on an old version and, at one point he says to apply the radial blur effect video.
    The problem is: This effect is not where it should be, or no longer exists. Can anyone tell if it still exists? It was replaced ?   
    If not, how to simulate the same effect? Since all existing blur options in CC version does not do anything like the Radial Blur.
    Already,
    Thank you to all !

    The project was very large. Connected to 5 TB of media on a server, not local, or ext. hd.  I needed to "trim" the sequences to make them manageable to put on an Ext HD and mail around the world to different bureaus of our media company.  I opened the project manager and trimmed the first sequence and it worked fine.  All subsequent sequences ended in the same error. "Unknown error, please save and re-try." I tried changing the settings of the "trim" and nothing worked. I tried several different computer, still didn't work.  I tried saving the trimmed sequences to different HD's, servers, local desktops, etc. Nothing worked. Same Unknown Error.  I think it might have to do with audio that is in the sequence that is not being used in conjunction with the associated video.  But, that is crazy. All sequences include this type of editing. But, the first sequence that worked didn't. SO, maybe that is it.
    Please fix this problem because I still need to trim these sequences and I'm on a deadline of December 1, 2014! 
    Thank you,
    Ben Dyer

Maybe you are looking for