Exporting Access Connections profile / Import to Windows Wireless

Hi All.
I have an issue which i really hope someone have a solution for as either googling and searching through 53 pages on this forum has not provided me with an answer. Here goes...
The hospital on which i'm working are about to change their IT-infrastructure and when this migration takes place i will no longer be able to use Access Connections. I have about 30 profiles in AC and all of them with a security key which would be hell to setup again through windows wireless.
Do any of you know of a way to export profiles from AC and then import them to Windows Wireless?
Thanks in advance!

Domain policy wireless profiles are not compatible with Access Connections.
The problem stems that Domain profiles are stored in a different part of the registry than a locally created WZC profile.  Since these are part of the domain policy, they cannot be altered locally.  Microsoft wouldn't provide Lenovothe encryption used (for obvious security reasons), so the domain policy based profiles can't be manipulated by Access Connections.
But we do provide an ADM template that can be used to do much the same things.
 http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=ACON-DEPLOY

Similar Messages

  • Access Connections does not accept Windows Wireless Config

    Hi All,
    We are rolling out RADIUS/802.1x wireless lan in our enterprise. The wireless settings are deplyed via AD grouo policy - no problems there.
    I have an issue when i configure my access connections (ver 5.21) on my T61 machine. I configure AC to use Windows wireless security settings whcih are picked up correctly. The issues occur when i switch from this profile to another profile for exampls and vice versa. AC seems to think that i need to configure my wlan security settings each time i switch to that profile and wont connect. I get an error message:
    The SSID 'WM2009' selected for this profile must be configured in windows. Click OK to configure the wireless settings in Windows'.
    I know that the wireless settings are fine, as i can connect with the window wireless client fine - its just AC that has the issue.
    Any ideas appreciated!

    Domain policy wireless profiles are not compatible with Access Connections.
    The problem stems that Domain profiles are stored in a different part of the registry than a locally created WZC profile.  Since these are part of the domain policy, they cannot be altered locally.  Microsoft wouldn't provide Lenovothe encryption used (for obvious security reasons), so the domain policy based profiles can't be manipulated by Access Connections.
    But we do provide an ADM template that can be used to do much the same things.
     http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=ACON-DEPLOY

  • Access connections not displaying in range wireless networks

    A couple of weeks ago I had a problem with my X200 (Win 7 64bit) which hung during bootup and had to be recovered by a hard power down.  It restarted OK but ever since then Access connections does not show any wireless connections available.  It will actually connect by wireless no problem but I now have no choice on what I can connect to.  I tried a system restore to a point before the problem started - still the same.  I tried the Lenovo phone helpdesk and they suggested re-installing the Wi-fi driver by downloading and installing the most recent update.  The machine is fitted with an Intel Wi-fi Link 5100 and I've installed the latest driver 13.02.0000.  The installation instructions also indicted that I needed to update the Thinkpad Power Management driver, Thinkvantage Access Connections and Hotkey Features Integration for compatibility with the latest Wifi driver, which I did in reverse order.  After all this, the problem still persists.  Any ideas on how to fix it would be greatly appreciated.

    So, I uninstalled Access Connections and reinstalled via Lenovo Update.
    It now works, yet i could only innitially connect via "details" and not  graphical... after which the graphical interface now reads  the network as being there and connected (it took a while for it to show up)
    I will update whether or not this "fix" sticks.
    For those of you who are like "Why use Access Connections at all?",--I like the customizable profiles (performance vs power savings, proxy etc)

  • Access connection​s does not see wireless networks but can connect if you know the SSID

    Running a Thinkpad x200 using windows 7 and Access Connections 5.42.
    A few weeks ago i was traveling and was connecting to a hotel wireless network.
    Could receive email but wasn't able to send email due to hotel port restrictions so long-story short version-- IT staff at hotel told me to connect via LAN. Which i did by simply plugging in LAN line to the thinkpad and to the hotel -- port -- no other changes. have done this a million times at home and elsewhere.
    All is well....
    until....
    I get home and i notice that when i use access connections, it doesn't see any wireless connections (no icons in the radar screen). It automatically connects to my home network and i can use the home profile to connect.  Same for any connection that i know the SSID for -- i can't see it but i can connect to it.
    But it doesn't show any icons during "find" or find again. It only shows the home icon i am connected to. If i disconnect and try to find wireless networks. It doesn't show any.
    So i know
    1) radio is working
    2) can connect via lan
    3) can connect to a known wireless if i know the SSID and either manually configure it or if i have the profile saved
    4) i have run antivirus, malwarebytes - etc -- all clean
    5) have rebooted, turned radio on off
    6) system restore doesn't help
    7)  all wireless networks are now invisible to radar screen. Have tried this at starbucks, around town - etc -- available wireless network icons are invisible
    I'm not sure that hooking up LAN in the hotel did anything but it seems too coincidental. Also seem to recall a thread where this has been known to happen.
    Help!!!

    First off, it sees the networks. That's good. You reset network settings which usually corrects a number of problems. Let's focus on your home network and getting connected to that.
    1. Reboot your router (just power it off for 10 secs). Try to connect. If it works, you are done. If not, step 2
    2. Reset your network settings again. However, this time log onto your network by tapping Settings > WiFi > Other and re-entering your network name, security settings, and password.
    Check your connection by tapping the blue > next to the network name with the checkmark. If your IP starts with 169.x, then you are connected but your router is not issuing you an IP address. This leads to a couple of additional problem areas - WEP encryption and outdated router firmware.
    If you continue to have problems, tell us which router/model, security settings used, etc.

  • Access Connection on X31 with Windows 7

    Hi
    Is it possible to get ThinkVantage Access Connection to work on a X31 (2672-CEG with Intel 2100 B3) with Windows 7?
    I've tried newest Power Manager (1.60.0.4), Intel driver (1.2.5.37) , Access Connection (5.61) nad Hotkey FI (3.09) but Access Connections can't see that the wireless NIC is turned on, and therefore I can't not turn it off
    Kind Regards
    Bo
    Solved!
    Go to Solution.

    Hi,
    unfortunatley X31 is not supported by the latest version of Access connection.So I really doubt, if you will be able to get this work is some way.
    I understand, that these are not the best news.
    Please mark this thread as closed, as unfortunatley there is not much that can be done.
    Cheers

  • Access Connection​s Problems With Windows 7 and Microsoft Security Essentials

    There appears to be a conflict with Access Connections and Microsoft Security Essentials which causes Microsoft Security Essentials to generate high page faults and high CPU usage, and prevents normal operation of Access Connections.
    After fresh install and reboot Access Connections would not launch, and when cursor was moved to the taskbar, the cursor pointer changed to a spinning loop.  Clicking on the Access Connections gadget did nothing. Looking at Task Manager, Microsoft Security Essentials program msmpeng.exe was experiencing 5000+ page faults per interval.  Terminating msmpeng.exe immediately caused Access Connections to launch.
    System configuration: Lenovo Thinkpad x200s with Windows 7 Ultimate 64 RTM (installed with a fresh install) with all current updates, and all updates from Leovo including Access Connections V 5,42 Build 6JC725WW,
    Solved!
    Go to Solution.

    Here is a workaround to fix the issue
    1) Launch MS Security Essentials
    2) Click on the "settings" tab
    3) Click on "Excluded files & Locations"
    4) Click "Add"
    5) browse and add the following exceptions
     a) C:\Users\Public\Lenovo\Access connections
     b) C:\Users\Public\Lenovo\Access connections\AccConnAdvanced.html
    6) Click "Save Changes"
    The issue is also resolved in AC 5.5 which is posted to the web
    http://www-307.ibm.com/pc/support/site.wss/documen​t.do?lndocid=MIGR-73682
    Can someone please test both solutions and let me know if the issue is resolved.
    Thanks

  • How to export iMovie clips for import to Windows video editing programs?

    What export format creates an exact digital copy of mini-dv video which can be recognised and imported by Windows video editors?
    I need to give editable copies of DV to Windows users, The lowest common denominator is Windows Movie Maker, which does not recognise .dv files created by copying from the project's Media folder, or Sharing a Movie to DV stream.
    I want to burn data DVDs with clips or complete projects from iMovie which are equivalent to copying back to mini-DV tapes.
    Is Share to AVI my only option?
    If so, is there any loss in quality?
    iMac G5, MacBook, iMac 233 (R.I.P.)   Mac OS X (10.4.7)  

    after spending a few minutes on the net concerning that WindowMovieMaker, my guess is:
    WMM does NOT accept a "file.dv" ...
    but is does accept that same dv within an avi container... "file.avi"
    avi and mov are just containers, not formats, as a box of chocolate, "wrappers" for many codecs...
    try to export your clips as avi, and choose under compressor "DV"...- give that a try...
    DV is the same codec which is in use on miniDV tapes, and the same, iM uses internally... so, it should be no quality loss.. just a "wrapping"...
    (me no PCuser, just read that...)

  • Exporting in Unix and importing in Windows

    Hi,
    I have exported a DB in Unix, I connected from my windows client and exported the db.
    I want to import this to in to a DB created on windows. The versions of oracle are the same(exp db and imp db). Can I perform normal import or do I have to handle anything special since the platforms are different.
    I tried to import and I have noticed the following error in my log file.ORA-23327: imported deferred rpc data does not match string of importing db .
    The oracle version is 10.2.0.3
    Window 2003.
    Thank you

    Hi tcklion,
    Could you pls check how to import the data dump from windows to unix
    (Note: the dump has taken from windows and i transferred through FTP by binary mode..
    Any soultion..:-)
    I am getting an error that Oracle table or view does not eexist, but the import of that database is done properly with msg, "Importing Done Successfully Without any warnings"

  • Fn-F5 missing Access Connections profiles?

    I'm running Windows 7 (preload EE) after upgrading from Vista on my X200. However, the Fn-F5 no longer shows my profiles and thus is an inconvenience when switching locations.
    Any one know how to get them back?
    Thanks,
    Jason

    Hello. ;D
    I did as above and nothing happened.
    I have Windows 7 Pro x64 installed and:
    - Access Conections 5.61
    - Power Managment Driver 1.60.0.4
    - Power Manager 3.20
    - Lenovo System Interface Driver 1.01
    - Hotkey Features Integration Package Integration 3.09
    - Microsoft .NET Framework 4 Client Profile and Extended
    What could be wrong?
    Besides when I press Fn+F5 I have that screen as below.
    Link to picture
    T400 2768-CT7
    C2D P9600, 2x 4GB Kingston 1066MHz, 256MB 3470HD (1440x900), FUJITSU MHZ2160BJ G1 + HITACHI HTS541616J9SA00 (ultrabay), 5100AGN, BT
    T61 7664-1KU (died cause nVidia GPU fail)

  • Re: Runaway memory usage in Access Connections AcSvc.exe on Windows Vista (SP1).

    Wow... They deleted my previous message where I complained about AC and suggested to use Windows built-in functions for Wi-Fi switching instead.
    Well, I have Vista Business 64 on Thinkpad T61p and this piece of software just never worked properly out-of-the box. Neither does newer version 5.0.2. It still leaks memory and CPU badly, to which there's plenty of evidence (see my previous posts) and no solution. 
    Sure, deleting messages criticizing bad software is easier than addressing the problem.

    Cozzamara wrote:
    Sure, deleting messages criticizing bad software is easier than addressing the problem.
    For a change, I'm not the moderator who deleted that particular message, but looking at that moderator's comments in our archive, I believe he felt it was more of a rant and less of a productive critique of problems.
    You can criticize all you like as long as it's reasonable and productive.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Jane
    2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
    I am not a Lenovo Employee.
    I AM one of those crazy ThinkPad zealots!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

  • Access connections 5 version 5.83 and windows 7 Professional 64-bit

    This is the first time I use this forum, please excuse me for any mistakes. I have just installed windows 7 professional 64-bit on a thinkpad T410 and downloaded the access connections 5 version 5.83. My access connections profiles have been exported when my laptop was under win XP and have been imported under win7. The problem is that although they do function, both WLAN and LAN type of connections, I cannot have two connections (one LAN and one WLAN) running at the same time, something that it could be done under winXP. One thing that I've noticed in the profiles, that is grayed out now, which I was able to control under winXP but now I can't, is the "disable this wireless radio when switching to a different location" for WLAN profiles and
    "disconnect form the network when switching to a different location" for LAN profiles. These two profile parameters helped me achieve simultaneous connections. Why are they grayed out and how can I correct this issue? Regards Marios S.

    hey Marios,
    could you uninstall both wireless and wired network drivers from your system and then let win7 install its native drivers.
    once done see if it happens again. also i recommend removing all network profiles and start fresh.
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • Access Connection​s Auto Install With Default Profile?

    Is there a way that when access connection installs using thin installer to auto import the default profile I have created?
    Solved!
    Go to Solution.

    Hi jcav404,
    Chapter 4 and Appendix A might ablr to help.
    ThinkVantage Access Connections Profile Deployment guide - Notebooks
    http://support.lenovo.com/en_US/guides-and-manuals​/detail.page?&LegacyDocID=MIGR-52881
    Fred
    T61 + X201i

  • Access Connections (5.84) opens with no window displayed (Win 7)

    I am running Windows 7 (64-bit) on a T500 with 6GB of RAM.
    I ran the Lenovo Software Update utility the other day and installed all of the listed updates. This morning, I attempted to bring up Access Connections (aka Internet Connections; v. 5.84) to take a look at the profiles I had defined. When I start Access Connections, the task appears in the task bar but there is no window displayed!
    I thought that the update that was performed through TVSU might have gone wrong so I downloaded 5.84 from Lenovo's website and attempted to install it again and I'm seeing the same behavior.
    Has anyone else encountered this problem?
    For now, it's not severe issue as I don't have a need to create a new connection profile but I may have to soon.
    Any suggestions on what I should try?
    Thanks in advance.

    I was experiencing exactly the same problems with my T500 Win7 X64 Utilimate machine after the last set of Lenovo updates.  It took a few days for me to notice the problem.   Not only weren't the Access Connections and Power Manager windows not rendering, I also stumbled onto the fact that my Blackberry Desktop Manager was also not rendering. 
    I had also applied a number of windows updates as well.  I backed them all off with no change. 
    LENOVO SOFTWARE SUPPORT DOES NOT EXIST!!.  I called the 800 number 1-800-IBM-SERV and was told by the IBM contractor answering the Thinkvange support call that he is only allowed to tell a customer to uninstall and reinstall the Lenovo provided software.  If that does not fix the problem then he must tell the customer to reload the system from a prior backup or reinstall the operating system.
    I booted the machine in safe mode with networking and found that the Power Manager and Access Connections windows will render.  That reminded me that included in the recent System Updates was a new display adapter driver from AMD.   I have had problems with these drivers in the past and went into device manager and rolled back the driver.  Reboot and now I have my access connection, power manager and Blackberry desktop windows fully operating.
    IS THERE NO WAY TO REPORT A PROBLEM TO LENOVO FOR THEIR SOFTWARE ISSUES?
    I hope this helps you and anyone else experiencing the same problems.
    LENOVO  -  The last AMD Dual Driver is BAD!!!! as was releated in the past month for X64 machines.
    I can be contacted at xxxxxxxxxxx if any Lenovo representatives or managers would like to discuss this issue and why I should continue to buy ThinkPads for me and my clients.
    Moderator note; e-mail address removed to stop the spambots getting it

  • Unable to edit or delete profile in Access Connection 5

    Hi Everybody!
    I'm unable to edit or delete profiles in Access Connection on my T41 running latest Access Connection v5.
    The edit and delete buttons on the Access Connection Profile menu are shown only in light grey color and it's not possible to click them. I have administrator rights on my machine. These profiles were initially migrated from a very old v3 (automatically during system update) and I guess that this is one of the root causes of my problem.
    I have also tried to use the QCTRAY.EXE /DEL command, but that's also not working. The profiles just remain there unchanged.
    I would be very pleased if somebody could give me a hint on how to overcome this boring problem.
    Best regards,
    Helmut
    Solved!
    Go to Solution.

    v3 profiles are not compatible with v5.
    The best solution in your case would be to uninstall Access Connections with profiles and then reinstall and create new profiles.

  • Access connection​s 5.50 and EAP TLS with Computer certificat​e

    Hello,
    I'm trying to connect to a Wifi using Computer certificate to authenticate and it works perfectly fine with windows Wireless Zero Config however with Thinkvantage Access Connection I always get an authentication error.
    I'm using a R61 with a ThinkPad 802.11a/b/g/n, 802.11b/g/n Wireless LAN Mini PCI Express Adapter. It's been updated to the latest driver (v7.6.1.260b)
    OS is windows XP with SP3 and all the windows update (as of today).
    On my Radius server this is what I get:
    If I use WZC I get this in the authentication:
    Security ID: DOMAIN\R61WXP$ (this is my computer name)
    Account name: host/R61WXP.domain.local
    Account Domain: DOMAIN
    FQDN: DOMAIN\R61WXP$
    When I use Access Connections:
    Security ID: DOMAIN\Guest
     Account name: 
    Account Domain: DOMAIN
    FQDN: DOMAIN\Guest
    My Access connection profile is set this way:
    IEEE802.1x => Authenticate as Computer when the information is available.
    I hope someone can help !
    Thanks!

    Hi,
    try to dissable the IEEE802.1x => Authenticate as Computer when the information is available.
    Make also sure, that the profile connection is correctly configured in the AC profile settings.
    This mighe the the root cause.
    I can tell you, that there must be something missconfigured, as this configuration will surelly work .
    Cheers

Maybe you are looking for

  • Can you transfer your star ratings from an iPod classic back to itunes?

    Hi Is it possible to get your star rating from your ipod and use the data to recreated your top rated in iTunes? Any help would be much appreciated.

  • Re-Install Portal

    iam planning to re-install the sneak preview of EP. What is the correct of re-install completely from the system? anybody?plz..

  • Account/Accrual keys

    Hi, In the pricing configurtaion, for rebates both the account key and accrual key columns are filled in with the relevant keys. 1 ) In VKOA, there are two GL account columns, so that means the first GL column relates to account key and the 2nd GL co

  • I need to transfer videos to new computer

    ok, So i deleted my son's itunes, and he has some videos on his IPOD that he would like to keep, situation is, i transfered all the songs under "summary" but the videos are off like YOU TUBE and home movies..... anyone have an idea how to get off the

  • Points for the blog created in September 2013

    Hello there I posted a blog in September 2013. I do not see the points awarded for it. I did check the profile settings to earn the badge and one of them does state that you need to post a blog, which I already did. Kindly do the needful! The link to