Points for the blog created in September 2013

Hello there
I posted a blog in September 2013. I do not see the points awarded for it. I did check the profile settings to earn the badge and one of them does state that you need to post a blog, which I already did.
Kindly do the needful!
The link to the blog is as follows:
How to Ensure that BPC Displays Only Uploaded Records for Planning
Regards
Gajendra

Hi Gajendra,
You posted your blog as personal blog. So no points assigned.
If you post technical docs/blogs at related forums then only you will get points.
No points for personal blogs/docs.
If you posted at BPC 10 NW forum. you may get points for the same. at below forum you need to choose create blog or doc.
SAP Planning and Consolidation, version for SAP NetWeaver
Thanks

Similar Messages

  • SSRS 2008 Column Chart with Calculated Series (moving average) "formula error - there are not enough data points for the period" error

    I have a simple column chart grouping on 1 value on the category axis.  For simplicity's sake, we are plotting $ amounts grouping by Month on the category axis.  I right click on the data series and choose "Add calculated series...".  I choose moving average.  I want to move the average over at least 2 periods.
    When I run the report, I get the error "Formula error - there are not enough data points for the period".  The way the report is, I never have a guaranteed number of categories (there could be one or there could be 5).  When there is 2 or more, the chart renders fine, however, when there is only 1 value, instead of suppressing the moving average line, I get that error and the chart shows nothing.
    I don't think this is entirely acceptable for our end users.  At a minimum, I would think the moving average line would be suppressed instead of hiding the entire chart.  Does anyone know of any workarounds or do I have to enter another ms. connect bug/design consideration.
    Thank you,
    Dan

    I was having the same error while trying to plot a moving average across 7 days. The work around I found was rather simple.
    If you right click your report in the solution explorer and select "View Code" it will give you the underlying XML of the report. Find the entry for the value of your calculated series and enter a formula to dynamically create your periods.
    <ChartFormulaParameter Name="Period">
                      <Value>=IIf(Count(Fields!Calls.Value) >= 7 ,7, (Count(Fields!Calls.Value)))</Value>
    </ChartFormulaParameter>
    What I'm doing here is getting the row count of records returned in the chart. If the returned rows are greater than or equal to 7 (The amount of days I want the average) it will set the points to 7. If not, it will set the number to the amount of returned rows. So far this has worked great. I'm probably going to add more code to handle no records returned although in my case that shouldn't happen but, you never know.
    A side note:
    If you open the calculated series properties in the designer, you will notice the number of periods is set to "0". If you change this it will overwrite your custom formula in the XML.

  • How to implement tooltip for the list items for the particular column in sharepoint 2013

    Hi,
    I had created a list, How to implement tooltip for the list items for the particular column in SharePoint 2013.
    Any help will be appreciated

    We can use JavaScript or JQuery to show the tooltips. Refer to the following similar thread.
    http://social.technet.microsoft.com/forums/en/sharepointdevelopmentprevious/thread/1dac3ae0-c9ce-419d-b6dd-08dd48284324
    http://stackoverflow.com/questions/3366515/small-description-window-on-mouse-hover-on-hyperlink
    http://spjsblog.com/2012/02/12/list-view-preview-item-on-hover-sharepoint-2010/

  • How to increase Decimal Points for the BOM Component Quantity

    Hi All,
    While creating BOM:
    Can anyone help me to know how i can increase the Decimal points for the BOM components quantity.
    I can able to give only upto 3 decimal points, but the requirement is more than that.
    I have increased the Decimal point value to 5 in transaction Code CUNI. but still it is allowing me to enter only upto three decimal places.
    Thanks and Regards
    Khadeer

    Khadeer,
    You would be better off changing the base quantity of the parent part.  Instead of "1 EA  parent contains .00003MG of  component" you could say "100 EA parents contain .003MG of component".
    Alternately, you could use different units of measure for your parent or component parts, which would be more suitable for the 3 place decimal limitation.
    I agree with Anil in that if you elect to change the decimals from standard, you could end up with huge changes that will propagate through every module in the ERP.  In my view, there is no need of this kind of headache.
    Best Regards,
    DB49

  • Looking for a good starting point for the HR module

    Hello,
    Can someone please send links to help/blogs which will be a good starting point for the HR module?
    Thanks,
    Roy

    Regarding Payroll configuration
    https://forums.sdn.sap.com/click.jspa?searchID=8283334&messageID=4763364
    follow wht our gurus has said

  • Can I use the Ethernet Port for a computer when it is also used as a wireless network with an Airport Extreme as the access point for the wireless network

    Can I use the Ethernet Port  of the A1264 Airport Express to connect to the Ethernet port of a computer that does not have wireless capability when the Airport Express is also used on a wireless network with an Airport Extreme 5th generation as the access point for the network?
    I have AE 5th gen
    looking to buy (from ebay) the AEX A1264
    Various computers, printers and hubs for the network
    Is this possible to do?

    Bob, Thanks for the info. I have read different articles that said yes, but I wanted to make sure before I commit to buy. I have an older A1084 which I could not use the Ethernet port. I know at one point I was able to when I was on 10.4. Now that I am on an Intel processor and 10.8 I am going to have to upgrade some of my Apple wireless hardware.
    Thanks Again.

  • Break point for the particular user

    Anybody knows how to set up a break point for the particular user on a particular statement. So I can see this breakpoint on my screen when it happened?

    Hi,
    If the user ID is USERA then set a breakpoint for USERA as :
    BREAK USERA.
    Cheers,
    Aditya

  • RSRV not showing number of record for the newly created cubes

    In RSRV Elementary tests i execute database information for a newly created cube.It is executed fine and it is showing the no of dimensions and line item dimensions but it is not showing the diff tables E,F.... I tried refreshing the statistics of this cube in the manage and did check statistics aswell.But it is still the same.and I tried in the program SAP_INFOCUBE_DESIGNS  it is showing for all the cubes except for the newly created once.
    Is there any settings as such.
    Let me know ASAP

    Hi Ninad,
    Use the program SAP_INFOCUBE_DESIGNS and get the cube size in bytes.
    Transaction se16 -> fact table name, /bic/f[infocube name] and /bic/e[infocube name] or /bi0/f.. and /bi0/e for business content infocube, click 'number of entries' - This is for no. of records.
    Transaction DB02 -> 'detail analysis' -> object name = [infocube name]
    Function Module - RSDU_INFOCUBE_TABLE_SIZES_INF
    Bye
    Dinesh

  • Does anybody knows when is the launch for the new iPad retina display 2013?, Does anybody knows when is the launch for the new iPad retina display 2013?

    Does anybody knows when is the launch for the new iPad retina display 2013?

    King_Penguin wrote:
    Nobody on here will know until if/when Apple announce something.
    Ditto

  • Create users in iWeb for the blog area

    Hi all,
    I'm creating a new website with this wonderful tool called iWeb, the point of the whole website is to make it available for those people interested in work on it. I was wondering if is possible to create different users to limit the comments within the blog area, something that you can do quickly in blogger, instead of leave open the comment area to whoever will read our magazine, if so, could you tell me how can I do that?, even if there is a external-nifty tool, that would be great!.
    Thanks in advance
    MacBook   Mac OS X (10.4.9)  

    If publishing to a .Mac space, you can password
    protect the site, and blog.
    It'll still only allow for comments, rather than
    allowing users to create new blog entries, but at
    leat you'll know it's by one of those you have
    allowed in.
    I expected something like that to be honest with you, the whole point is to have the website open and at the same time use several users to work on it, apparently it is not possible, I will send a new form to request an improvement on iWeb for that.
    Thanks very much for your answer
    MacBook   Mac OS X (10.4.8)   Xerox Office Printers attached
    MacBook   Mac OS X (10.4.9)   Xerox Office Printers attached

  • How do I create an archive system for a blog created with a custom app?

    I had to create a blog using a custom app, because I needed an image to show up in the list view (a feature I can't believe does not exist in the blog module). Anyways, I am wondering how can I create an archive system? Do I need to create categories for each month/year and then classify the post each time we create one. Then manually create links each month to pages that filters listing by that category? This is the system I tried, but I was wondering if there was a better way.
    Also, I would like to have a sidebar that shows all the authors/contributors of the blogs and have a count under their photo that shows how many blogs they have contributed to, and have this update dynamically each time they create a new post. I was wondering if a data source tag is the way to do this but I don't have enough information on how the data source tag even works, to really know how to do this.
    I have searched google for hours, and even signed up for BC gurus tutorials with no real luck. I thought BC gurus was going to have the answer but it wasn't quite detailed enough. Any help would be much appreciated. Thanks!

    You can use classifications but there is no auto feature to archive like that on web apps.
    In terms of the blog, Like I have said to everyone that has posted about blog preview images:
    http://www.prettypollution.com.au/business-catalyst-blog
    Just one example of an image at the start of the blog post rendering out, not hard at all.

  • Issue with the change pointer  for the reduced message type ZMATMAS

    Hi All,
    I have created reduced message type ZMATMAS for the MATMAS to create a Idoc when change or insert material master data fields( MARA-LAENG, MARA-BREIT, MARA-HOEHE) . My Problem is that the Idoc is generated with the status (03) but the fields(LAENG, BREIT,HOEHE)  are not getting fill with the values. They are always filling with the values  '/'). I have done the following steps to create idoc for the change pointer. Please check whether i have missed some steps.
    1.     Create reduction maintenance ZMATMAS  (Tcode BD53)
    keep the default selected segments E1MARAM, E1MAKTM
    2.     Add following data to maintain table view for the message type ZMATMAS  (Tcode BD52)
    Object      Table Name     Field Name
    MATERIAL       MARA      KEY
    MATERIAL     MARA     LAENG
    MATERIAL     MARA     BREIT
    MATERIAL     MARA     HOEHE
    3.     Activate particular change pointer in BD50
    Message Type       Active
    ZMATMAS         yes
    4.     Activate change pointers u2013 Generally (Tcode BD61).
    5.     Assign Segment fields to change document fields (Tcode BD66 )
    Segment Type     Field Name     Object     Table Name     Field Name
    E1MARAM     BREIT     MATERIAL     MARA     BREIT
    E1MARAM     HOEHE     MATERIAL     MARA     HOEHE
    E1MARAM     LAENG     MATERIAL     MARA     LAENG
    6. I have done the distribution model settings (BD64) and  the idoc configurations
    1.     Logical System
    2.     RFC destination
    3.     Create port
    4.     Create partner profile
    7. I changed the fields in material master data(Tcode MM02)  and I executed the Tcode BD21.
    Idoc is generated but the fields are not getting fill with the values
    (Note: some fields  are filled with values e. g material number, material description)
    I checked the Idoc data segment E1MARAM (WE02)
    Fld name   Fld cont.
    LAENG       /
    BREIT       /
    HOEHE      /
    Can you please let me know the issue
    Prad

    Issue is solved when I select the segments and the fields in the segments (Tcode :BD53)
    Prad

  • User Exit for the PO Create in 4.6c version

    Hi Experts,
    We have a requirement where we want to note the PO number
    generated in ME21n, schedule a job to run for upadating the same PO( putting Vendor Confirmation ),
    after the PO is successfully created.
    Can someone help me the with the exits available in 4.6c for
    picking the PO number generated in ME21n. And also , exit where we can scedule
    the job of same PO change, ensuring that the PO has been created in database.
    We want the following :
    1. During PO create , note the PO number
    2. During PO create, schedule a job for the same PO update.( to put Vendor confirmation )
    3. Ensure that the job runs afer PO is succesfully created in database.
    4. Use the Exit available by SAP.
    Note we are in SAP 4.6C version. The BADI, ME_PROCESS_PO_CUST is not available in
    4.6C
    Thanks to all for giving valuable suggestions.
    Regards,
    Purva

    Hi Purva,
    Get the PO new PO number from this Enhacement :MM06E005
    Exit:EXIT_SAPMM06E_013
    Here you can get the created PO number in
    the field I_EKKO-EBELN.
    Thanks.
    Note:Reward Points if you find useful.

  • Unable to add XML support for the jws created

    Hi,
    I have created a web service, with a method called "Query".
    I would like add an input parameter to this method using XML bean types.
    I am following the weblogic workshop tutorials(http://edocs.bea.com/workshop/docs81/doc/en/core/index.html), topic Tutorial:Web Services.
    I was able to complete steps 1,2,3 described.
    However Step 4 Point 7, i fail to see the schema elements.
    Could you pls let me know the reason for the above.
    Pls find attached the screen shot of the failure of step 4.
    Regards
    Vidya

    Please open a case with BEA customer support. Give them the URL for this posting
    http://forums.bea.com/bea/thread.jspa?threadID=400003485&tstart=0&mod=1177942950176
    I believe the problem you see is addressed in CR296902

  • What will be data type for the newly created Service Interface def.?

    hi @,
    I am using new Service interface for the start event with objective that any outside application will be able to trigger the BPM. I have created the same SI and its operation and Input params. Now when the request comes there is an exclusive choice gateway which based upon the input fields decide which path to take into consideration. Now I need to map the SI input to the Data object but which data type I need to use ideally it should be the data type defined in the Service Interface should be used but I am not able to locate the same in the data type folder .
    How can I map the input service interface data type to the Data object so that it is available in the next BPM steps?
    Thanks,

    Hi,
    Typically the used types in a new service interface are anonymous. Try making the used complex type a global one (Right-Click onto it -> Refactor -> Make Anonymous Type Global).
    Afterwards you could use the speed button around your your 'start event' and create a new 'data object' from there. Now the IDE automatically assigns the type of the service interface to your 'data object' and  performs the standard mapping between the 'start event' and the 'data object' in addition.
    Please also have a look at the documentation for further information:
    Accelerated Modeling with Speed Buttons
    http://help.sap.com/saphelp_nwce711/helpdata/en/16/52f063cac643d2917347aab86930ef/frameset.htm
    There is also an interesting blog entry dealing with data objects and their reuse:
    How to avoid modeling errors in Netweaver BPM? Part 3: Data flow in style
    /people/soeren.balko/blog/2009/02/03/how-to-avoid-modeling-errors-in-netweaver-bpm-part-3-data-flow-in-style
    Hope that helps,
    Martin

Maybe you are looking for