Exporting alpha numeric values using File Export Excel option

Hi,
When we export the report output to excel using the option file /export/excel/fully formatted grids and text, the text where we have alphanumeric characters, only the number component is getting exported. An example is 'Switch - Cisco 3750 (Goa) '. When the report data is exported, we can see only 3750 in the excel file. How do we fix this issue. Any help is highly appreciated.
P

Hello,
Try exporting in the 'fully formated grids and text'. It shouldl give you the 'member alias' used in the report.
Looks like if you export in the 'querry ready grids and text' it will show the 'member name' as in database although the report may have used the 'member alias'.
Regards

Similar Messages

  • Export the Form Data to Excel File using FILE EXPORT

    One problem i am getting...
    I want to export printers page to some excel file using FILE > EXPORT option.
    I login into System Administrator Responsibility > printers > register...
    I want to export this printers data to flat file(EXCEL File) using FILE > EXPORT in the form...
    The movement I click FILE > EXPORT...a flash screen appears and disapperas...nothing will be exported...
    What Might be the problem...
    How can I solve this...
    My FND_LOBS_CTX index is fine..it is valid and

    - Check the security level of the "Trusted sites" zone, make sure it is set to "Low"
    - Make sure you do not have a yellow warning bar
    - Make sure you are not accessing the application through dev60cgi/f60cgi
    - Verify that you have sufficient space in the tablespace (Check init<SID>.ora for any errors)
    - Check the export on some other modules to determine whether the issue is across all Apps or with a specific module only

  • Marketing campaign: e-mail using file export

    Hello,
    I have a few questions about the marketing part in Cloud for customer.
    1) Our prospect has an external solution to send out e-mails. So we choose the campaign type 'e-mail using file export'. Is it possible to add the response options to the excel file and upload the answers afterwards back into C4C?
    2) Can we use these results for reporting or create a new target group based on these response options?
    Best regards,
    Niels Gelders

    Hi Niels,
    In the export file format you can include the response code for use in the execution system, but we cannot upload these from the same file afterwards as far as I understand.  You have to manually create the responses in the C4C UI itself.
    Regarding question 2: Janina has the correct answer.  Additionally if you can export the information you want to xls you can always create a new target group from an xls file as well.  The only catch with that is if you need to have more than one export, you need more than one TG and then a master TG that contains them all.
    Let me know if you have any further questions.
    Michael

  • Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File - Export - Album name with number).

    Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File -> Export -> Album name with number).
    Exporting a single Event retains the Event name which is what I'd expect. But highlighting more than one event and exporting it renames the images to Events 001.JPG, Event 002.JPG etc.
    I was recently on holidays and had all my events nicely split on Dad's computer but when I went to export it I couldn't retain any of this information. Now I have to replicate this all again on my computer.
    It wasn't possible to export the entire library as the external drive was fat32 format an I didn't want all of it. It would be nice to export a bunch of events to someone and have it retain the name.
    Does anyone have a work around or will this be fixed at some point by Apple?

    Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File -> Export -> Album name with number).
    Exporting a single Event retains the Event name which is what I'd expect. But highlighting more than one event and exporting it renames the images to Events 001.JPG, Event 002.JPG etc.
    I was recently on holidays and had all my events nicely split on Dad's computer but when I went to export it I couldn't retain any of this information. Now I have to replicate this all again on my computer.
    It wasn't possible to export the entire library as the external drive was fat32 format an I didn't want all of it. It would be nice to export a bunch of events to someone and have it retain the name.
    Does anyone have a work around or will this be fixed at some point by Apple?

  • How do I copy/paste full numerical-only account strings into the Projects WebADI template when the account segment fields in the template require use of the dropdown because they're formatted as alpha-numeric values?

    How do I copy/paste full numerical-only account strings into the Projects WebADI template when the account segment fields in the template require use of the dropdown because they're formatted as alpha-numeric values? I'm using the Integrator named "Projects - Transaction Import" and a custom Layout created based on the seeded Layout named "Transaction Import - Accounted". Do I need to somehow change my Layout to make the Document accept numerical values instead of requiring alpha-numeric values? I need to be able to populate the Document with a large amount of transactions and cannot feasibly go through every transaction to add the alpha-valued name of the account segment to every segment that requires it. The segments in particular causing the problem are "Expnd Type" and "Organization Name" which are both alpha-numeric and as such contain the segment number and name; I need to be able to only have to enter the Natural Account Number (6-digit number only) and the Organization Number (5-digit number only).

    How do I copy/paste full numerical-only account strings into the Projects WebADI template when the account segment fields in the template require use of the dropdown because they're formatted as alpha-numeric values? I'm using the Integrator named "Projects - Transaction Import" and a custom Layout created based on the seeded Layout named "Transaction Import - Accounted". Do I need to somehow change my Layout to make the Document accept numerical values instead of requiring alpha-numeric values? I need to be able to populate the Document with a large amount of transactions and cannot feasibly go through every transaction to add the alpha-valued name of the account segment to every segment that requires it. The segments in particular causing the problem are "Expnd Type" and "Organization Name" which are both alpha-numeric and as such contain the segment number and name; I need to be able to only have to enter the Natural Account Number (6-digit number only) and the Organization Number (5-digit number only).

  • I have tried to use File - Export to reduce the size of my pics to send via email and all I get is a blank pic.  How do I reduce the size of the photo and still have the photo?

    I have tried to use File > Export to a folder on my Desk top to reduce the size of my photos and all I get is a blank, grey screen.  How do I reduce the size of my pics so I can email them?

    Where are you getting this screen?  In iPhoto after selecting the File ➙ Export menu option? If that's the case try this:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your Home/() Library/Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your Home()/Library/Caches/com.apple.iPhoto folder. 
    3 - launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences..
    You can resize photos outside of iPhoto with 3rd party applications like Resize!.
    Click to view full size
    With it you can change both the pixel size and file size of the photo to the size that suits your needs.  For other such apps go to MacUpDate.com and search for "image resize" to get a list of potential candidates.
    OT

  • BEx report hangs- selecting Alpha numeric values

    I am working on the existing customer report
    customer is the selection parameter for my report.
    Issue is Customer has numerical and alpha numerical values.
    If i give parameter rangs of value is numerical
    01 - 500 query works fine
    01-50cust1
    50 cust1 - 195 cust2
    query hangs.
    Is their any way we can improve the query performance .
    for searching alphanumerica values.
    I have a workbook is built based on the query.
    morethan 6 queries attached in the sheet 1....sheet2
    each sheet has it is own query with values.
    when I refresh and execute the workbook with the customer alphanumerica values it hangs.
    Query is built based on the multiprovider.
    Please help me onthis

    Hello,
    Try exporting in the 'fully formated grids and text'. It shouldl give you the 'member alias' used in the report.
    Looks like if you export in the 'querry ready grids and text' it will show the 'member name' as in database although the report may have used the 'member alias'.
    Regards

  • Alpha Numeric Values

    Hi
    IS it supported in GL code combinations to have a alpha numeric values in key segment values .. we have a project segment in our chart of accounts and need the aplpha numeric values eg PRT001 , ADT001 etc . We do have some customizations and wondering if code combinations would have any impact
    Thanks
    Veda

    Yes you can have alpha numerics.
    Regards,
    Gareth

  • How to display 'Alpha numeric values' in lower character?

    Hi,
    We have 'Alpha numeric value' in one column and i need to display alphabets in lower character.
    I tried but throwing error.
    SQL> select * from a439487.ora_dev_inventory;
    HOST_NM HA INV_DT
    SMMK94 - 21-AUG-08
    SQL> select to_lower(HOST_NM) from a439487.ora_dev_inventory;
    select to_lower(HOST_NM) from a439487.ora_dev_inventory
    ERROR at line 1:
    ORA-00904: "TO_LOWER": invalid identifier
    I want 'HOST_NM' to be displayed in lower value.
    I need o/p like 'smmk94'.
    Any idea?

    Where did you find the TO_LOWER function? Can you
    show us?I would guess it was just an assumption based on the fact we have to_char, to_date, to_number...
    ;)

  • How to create and export a sharepoint list connection file to excel connection file library from power pivot?

    Hi All,
    I'm new to SharePoint and Power BI.
    I've to use  share point 2013 lists to create power view reports. For that, I need to create Power Pivot in Excel 2013.
    I'm fine with the above. We normally take a data feed of a list and create connection to that. We need to create a connection file (.odc) and export it into a excel file connection library of Share point. The connection to be made to share point list. The
    power pivot will be having multiple related lists.
    How can I create a connection file which is referring to share point list
    Please suggest.
    Regards,
    Julie

    Hi All,
    Finally, I could find the answer for this question after a long search.
    First of all, open a new excel file in server.
    Data-->From other connection-->From data connection wizard-->data feed-->Location of the data feed-->
    http://sharepointsite/sitename/_vti_bin/ListData.svc
    -->next-->select the lists which you need-->next-->only create connection-->properties--->export connection file
    -->ok
    The connection file has been created and .odc file exported to the specified location.
    Open power pivot and check the connection in existing connections.
    Exported file has to be uploaded in Excel file connection library of share point 2013. So that you can refer the same in this excel file when you upload it into share point.
    Regards,
    Julie

  • IPhoto '11- Cannot Export using "File Export"

    I just upgraded from iPhoto '09 to iPhoto '11. I imported photos off my iPod touch and edited them. After editing them however, I can't export them to anywhere on my computer. Even before editing I cannot export them.
    I've tried:
    -Creating a folder manually in Finder
    -Creating a folder in iPhoto during the export setup
    When it starts to export, it suddenly says it could not create the new folder, despite it already existing. It says it cannot export the photos to any folder either. I've repaired Permissions in iPhoto (as well as in Disk Utility).

    AlexxxZ wrote:
    Hello All,
    I'm quit new with Mac.... and I am wondering hoe to export all my pictures to a Hard Drive that could easily be read where with Mac or Windows.
    I've tried the export option, but it just stops after some thousands pictures ( I have almost 13'000 photos). Any idea why this is happening? Is this because I have some .AVI files saved on my iPhoto events?
    This might be an issue with the format of your (external, I presume) hard drive. It would be worth trying exporting your files into several directories (folders). Perhaps try about 1000 in each directory.
    Can you pin down any particular file that causes iPhoto to stall? If so, is it particularly large, does it work OK in iPhoto, will it fit onto your disc etc?
    Regards.

  • Using files in Excel after they have been assimilated as XLF

    I did my first massive Xcelsius project for our board reporting and it went very well.   Now I need to create more "real data" and links to the underlying database - all the data stuff I didn't have time to do when pushing this prototype through so quickly.   Anyway, I can't open the XLF files in Excel 2007 and I need all my data in XLSX files so I can work on them and have other folks do some data entry, etc.
    In other words, I started with XLSX files, brought them into Xcelsius and made all my cool charts, etc. but now I need the files back as XLSX or somehow how need to be able to work on them in Excel as not everyone who has to do input has Xcelsius.
    Thanks for suggestions

    Depends on which version of Xcelsius you have.
    For X2008, use Data - Export.
    For CX4.5, Preview first. Then File - Snapshot - Back to Excel.
    Andy

  • How to Export two web items using one export button in WAD (3.X) ?

    Hello Friends,
    I am trying to export two reports using one export button which are in two columns of the table in a web template created in WAD 3.X. but not able to do it. i also tried to doing the same thing in BI 7 copied that code and pasted in 3.X but that doesn't work.
    can anyone help me on that?
    Thanks,
    Nayan Joshi

    hi,
    SPS 14 for NW 7.0 is installed. I found out, that the filter pane has should have the property "Affected Data Providers (LINKED_DATA_PROVIDER_REF_LIST)" and the navigation pane not. Look at:
    - http://help.sap.com/saphelp_nw70/helpdata/en/16/3ee2416149c717e10000000a155106/content.htm
    - http://help.sap.com/saphelp_nw70/helpdata/en/85/08e241aa8e9d39e10000000a155106/content.htm
    But in my WDA both items don't have this property. The latest SPS for Front-End-Tools is installed.
    Any further ideas?

  • Exporting from PHOTOS has no file size/naming option.

    I have always been able to download from my D750 in RAW NEF, and convert to JPEG when needed and given a size option.  I no longer see it.  Is it gone?  The same goes for naming an individual file.  Is that gone?  It also just converted a 200 monochrome photo shoot which took quite a bit of time to set up contrast, brightness, etc., to color upon download.  This will take a substantial amount of time to re-edit to get it back these pictures back to their original state, if I can.    Have all my previous files/albums been modified (size/resolution)?  Just what went on here?

    File>Export for selected photos:
    Play with the various dropdown boxes:
    Custom to choose custom size.

  • How to Return only alpha-numeric Values

    In my query, I want to return only records for which data in a specific column is alpha-numeric. Any records having this field as NULL, or containing symbols, I want to exclude. What's the best way to do this?
    Thanks,
    Brice

    select str from tab1
    where str is not null
    and translate(str, '_0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ','_') is null
    /Regards
    Dmytro

Maybe you are looking for