Exporting and CSS

I wonder if it´s possible to export all pages from
Fireworks at the same time and in that way recieve only one CSS
file? In the way I do it now I recieve one CSS file per page I
export. This is not the way I want it.
Looking for help!
/ Lena

Lena P wrote:
> Thank you for your answer.
>
> And then this forum might not be the right one, but is
there a way to combine
> multiple CSS files so you only have one?
>
> Or.... how do other designers export CSS files to
Dreamweaver in a correct
> manner?
>
> / Lena
>
Yes, in Dreamweaver you can use the CSS panel to move rules
from one
style sheet to another, or you can simply open the CSS files
themselves
within DW and copy/paste as needed.
That said, pay careful attention that you aren't duplicating
or
overwriting classes you need which are in the original CSS
file.
Depending on what you are doing, you may just want to stick
with one CSS
export from Fireworks, and then add any additional rules
manually within
Dreamweaver.
Jim Babbage - .:Community MX:. & .:Adobe Community
Expert:.
http://www.communityMX.com/
CommunityMX - Free Resources:
http://www.communitymx.com/free.cfm
.:Adobe Community Expert for Fireworks:.
Adobe Community Expert
http://tinyurl.com/2a7dyp
.:Author:.
Lynda.com -
http://movielibrary.lynda.com/authors/author/?aid=188
Peachpit Press -
http://www.peachpit.com/authors/bio.aspx?a=d98ed798-5ef0-45a8-a70d-4b35fa14c9a4
Layers Magazine -
http://www.layersmagazine.com/author/jim-babbage

Similar Messages

Concept to html and css export in FWCS5

Hi,
I'm trying to "play" with the image to html/css for website design.
I have a site http://bhbws.com/fairy/index02.php
that I'd like to try this out on. I have several issues...
when I go to export it's exporting as .tiff and I can't find in the preferences where to change this.
how do I export it when I have "simple rollovers" for the navigation??
I think I can figure out the rest...
TIA

After adding slices to your document, use the Optimize panel to select image formats for the slices and compression levels. When finished, choose File > Export. In the Export dialog window, choose export as CSS and images, or HTML and images. Export to your predefined Dreamweaver site.

Newsletter creation and CSS export in Adobe Fireworks

I am a new to adobe fireworks and am currently in the trial mode of my download.
I was advised that Adobe FIreworks CS6 is the ideal program to create graphics and text to build a newsletter for my company.
Not knowing much about the program, I was able to add graphics, text and hotspots on specific images and text with an html link for customers to be able to click to sign up for the newsletter via our website.
The million dollar question I have is how in the world do I export this document and paste it into the "body" of an email to send to 5k contacts?
I do not want an attachment, I want the body fo the email to be html or css coded, but I know nothing about either of the two or how to do it.
I did find one video that walked me thru the export css process, but none of my images were shown and 90% of the text was missing.
I believe I need to understand "layers" to get this to work properly but could really use some help!
I am dangerously close to missing out on advertising to all 5k contacts before the holiday. Please help!!
BTW - the reason for doing this instead of using standard mailchimp or constant contact is because I purchased my email list and those are forbidden in both constant contact and mailchimp hence why i need to create my own opt-in newsletter to get people to opt-in via my website.
Thanks in Advance!!

Seriously, do not use Fireworks to generate the html for your webpage. It is graphics program with *some* html capabilites, but I would never use it for a live site. It is always best to create the layout in Fireworks, slice it up as for use as individual images, or uses 'pieces' for background images and write the markup (html + css) in Dreamweaver or a HTML editor of your choice.
This tutorial may help you make the transition. Naturally it helps to have at least a basic knowledge of html and css before working with Dreamweaver, it will make using DW so much easier.
TAKING FIREWORKS COMP TO DREAMWEAVER:
http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt1.html
Creating your first website (series) (using Dreamweaver)
http://help.adobe.com/en_US/Dreamweaver/10.0_Using/WS42d4a1c0291fbe4e59147ede1232ff9686c-8 000.html
Nadia
Adobe® Community Expert : Dreamweaver
http://www.perrelink.com.au
Unique CSS Templates | Tutorials | SEO Articles
http://www.DreamweaverResources.com
http://twitter.com/nadiap

Custom html and css broken in BC

I have created some content in iWeb. A photo gallery that doesn't work when uploaded to BC.
It works fine when I upload to a different Host.
http://isodisc.businesscatalyst.com/usbcat/ISODISC_Full_USB_Flash_Catalog.html

I'm building my website in Muse, using a few Adobe typeKit fonts - Open Sans and Bebas Neue. There's plenty of code and css developed when I export the muse file QUESTION: Will Contribute maintain my font choice integrity? Or do I play it safe with standard web-safe choices?

Exporting as CSS in Trial Version

I attempted to export a page design from a CS4 Fireworks trial version to use in Dreamweaver and it came up with an error message saying:
"Could Not Complete your Request, file was not found"
I'm not sure if this is because of limitations of the trial program or if I am doing something wrong myself.
I went to: file -> export -> and changed the export option to "CSS and images" , thats when the error box appeared
Thanks for your help

AMD processor? Patch it to 6.0.4.
Bob

About HTML and CSS styles in the Contribute Style menu

This question was posted in response to the following article: http://help.adobe.com/en_US/contribute/using/WS5b3ccc516d4fbf351e63e3d1180fba3730-7e6cCS5. html

I'm building my website in Muse, using a few Adobe typeKit fonts - Open Sans and Bebas Neue. There's plenty of code and css developed when I export the muse file QUESTION: Will Contribute maintain my font choice integrity? Or do I play it safe with standard web-safe choices?

Alternative to Save for Web/Export as CSS Layers?

I'm am SO DEVASTATED that CS6 got rid of the option to save as CSS layers in Save for Web. I just updated from 5 to 6 and now I'm looking for an alternative but am having no luck. I've tried some scripts I've found online but none of them work the way I need, or at all.
I do animation in AI where each layer is a frame on the animation. In CS5 I could Save for Web and check the Export as CSS Layers box. This would export all the layers in my AI file to pngs, where each layer is it's own png file, in one folder. I could then import them as an image sequence in Photoshop and turn layers on and off with each frame to create my animation.
I tried exporting my AI file to a PSD file with maximum editability but the more complicated the animation (meaning the more layers and the more objects on each layer) it would start flattening layers without warning. Not to mention the rendering time just opening the file in Photoshop and then trying to save it there once I had created all my frames. Photoshop froze on me 6 times this morning while I was trying things out.
I'm desperate for a simple way to do the CSS layer trick. If I can't find one, I'm going to have to go back to CS5 permanently, or until I can find a solution.

here you go, let me know if it cuts it.
#target Illustrator
// script.name = exportLayersAsCSS_PNGs.jsx;
// script.description = mimics the Save for Web, export images as CSS Layers (images only);
// script.requirements = an open document; tested with CS5 on Windows.
// script.parent = carlos canto // 05/24/13; All rights reseved
// script.elegant = false;
* export layers as PNG
* @author Niels Bosma
// Adapted to export images as CSS Layers by CarlosCanto
if (app.documents.length>0) {
 main();
else alert('Cancelled by user');
function main() {
 var document = app.activeDocument;
 var afile = document.fullName;
 var filename = afile.name.split('.')[0];
 var folder = afile.parent.selectDlg("Export as CSS Layers (images only)...");
 if(folder != null)
 var activeABidx = document.artboards.getActiveArtboardIndex();
 var activeAB = document.artboards[activeABidx]; // get active AB
 var abBounds = activeAB.artboardRect;// left, top, right, bottom
 showAllLayers();
 var docBounds = document.visibleBounds;
 activeAB.artboardRect = docBounds;
 var options = new ExportOptionsPNG24();
 options.antiAliasing = true;
 options.transparency = true;
 options.artBoardClipping = true;
 var n = document.layers.length;
 hideAllLayers ();
 for(var i=0; i<n; ++i)
 //hideAllLayers();
 var layer = document.layers[i];
 layer.visible = true;
 var file = new File(folder.fsName + '/' +filename+ '-' + i+".png");
 document.exportFile(file,ExportType.PNG24,options);
 layer.visible = false;
 showAllLayers();
 activeAB.artboardRect = abBounds;
 function hideAllLayers()
 forEach(document.layers, function(layer) {
 layer.visible = false;
 function showAllLayers()
 forEach(document.layers, function(layer) {
 layer.visible = true;
 function forEach(collection, fn)
 var n = collection.length;
 for(var i=0; i<n; ++i)
 fn(collection[i]);

PL/SQL Server Pages (PSPs) and CSS

Hi,
I am used to creating standards compliant websites using XHTML and CSS and some other application language for dynamic content. I have recently started working with PL/SQL and want to create an application using PSPs. I was wondering the best way to go about including CSS in an application, because it doesn't make sense to duplication the CSS on each page, but since the PSP is converted to a procedure this seesm to be the only way to include CSS?
Any ideas on best practice for using CSS with PSPs?

I think you should be able to put all your CSS into a single file, or only a few files, like in a normal web project and that you can include this file using the regular HTML tag.
You store your CSS file(s) in a folder that is accessible by your website. Normally this is achieved by adding an Alias in the Apache webserver that is embedded in the Oracle database.
If I remember it correctly (it has been a while since I saw the embedded webserver) your request for your PSP goes to an url like http://your.server.com/pls/your_page. Everything of the url that comes after /pls/ is handled by the mod_plsql Apache module that is repsonsible for sending the request to the database and returning the result to the screen.
If you can define an alias like 'css' (without the quotes), which makes the url something like http://your.server.com/css/, then you can try to include your CSS file(s) referring to /css/file.css. Once you get this working, you can do the same for images.
This is a generic approach that can get you started hopefully.
Good luck.
I hope this can get you started. Information on the alias can be found

Question regarding export and import of Hyperion Security during upgrade

Hi Guys,
We are upgrading Essbase, Integration Services from 7x to 9x which are utilizing Hyperion Hub and we are going to follow the method of uninstalling 7x and reinstalling 9x components.
Now my question is, what is the best way of transferring security from 7x to 9x. I heard that Advanced Security Manager can be used to export and import back security. Or is there any
other way of doing it??
Can someone please enlighten me on this.
Thanks in advance
K

Ihatelightroom wrote:
First let me say that any software that comes without a save button should be sold with a warning label.
Why?
Question 1: I have having an issue comprehending how to save a photo. In my case I select the photo, zoom in on the subject, export it to my desktop. The pciture on my desktop does not incorporate the change. Am I missing a step? What do I need to do to export it with this change? I actually watched a You Tube video on this and could not see what i was not doing.
You must have selected the wrong option in the Export dialog box. Under "File Settings", you need to select JPG and not "Original". Of course, you probably need to do some additional viewing of videos (or some reading) to learn that most people's workflow does not automatically include a "Save" or "Export" after editing the photo. It's not a necessary part of Lightroom's workflow, unless you need the photo for some non-Lightroom activity.
Question 2: I just installed Lightroom and am trying to import my 12k strong photo collection. The Import button pulls in about 2k and then cannot find anymore. The photos are stored in folders by date within a master folder. I am selecting the master folder. I can go in and import the sub-fodler individually. However i do not want to do that 200 times.There is no apparent way to go into the subfolder level and select more than one folder.
In the Import dialog box, on the left, under "Source", there is a checkbox that says "Include SubFolders". Make sure this is checked.
Seriously, you need to spend some time reading introductory material about LR because Lightroom does not work like any other photographic software you might have used in the past. You are handling it as if it was no different than standard photo editing software, and you are going to be frustrated if that is your mindset. See the videos at adobe.tv and read this: http://www.flickr.com/groups/adobe_lightroom/discuss/72157603590978170/

I am using Iphoto 11 ver 9.4.3 on mac using oxs 10.8.5 i want to export calendar projects to an external hard drive. what is the easiest way to do this? i have tried export and import but it didn't seem to work.

I am using Iphoto 11 ver 9.4.3 on mac using oxs 10.8.5 i want to export calendar projects to an external hard drive. my goal is to store them in an external hard drive so it doesn't use up memory on the mac hard drive. is it possible to copy the specific projects without copying the entire library? what is the easiest way to do this? i have tried export and import but it didn't seem to work.

What do you not understand?
You can duplicate the iPhoto library (command - D ) and delete everything except the project and its photos from the copy and move that
Or
However the calendar takes very little space - it is simpy database entries - it is the photos in the calendar that take space - and for most people you would wnat to keep those photos in your library
you can use a photo in 50 calendars and it still is only one photo in your library - as I explained calenders do not exist as such - they are simply database entries telling iPhotop how to display the calendar - they take almost no space at all
LN

Export and deemed exp

I have joind a project in the middle and I am at complete loss to understand the export and deemed export scenario. I have gone through the help files but I am still not clear as to when i should include duties in the sales order and where i should not...........how to get the duties directly in the exc invoice .............. which registerss should i look in to for updation and how is rg23a ,c and pla relevant in this case.
plss assist in clearing out these things .i am sure a lot of fellow consultants could benefit from a detailed description for the same.
Regards
MAddy
Edited by: Maddy on Jun 12, 2008 11:07 AM
Edited by: Maddy on Jun 12, 2008 11:20 AM

Hi
Meddy,
Both are having the same excise duty effect. In both cases the duty will be not paid to excise authorities and both will be shown on invoice undeer forgone head. In both invoices you have to show all the duties which are applicable as tariff head. For gorgone duty case u have to prepare ARE1/ ARE3.
In case of export, material will be despatch to outside Inida ( foreign customer ) and in case of deemed export u can sell the good wihtin the india aginst CT2 and CT3.
So in both the cases u need not to debit any of yr RG23C,A or PLA this will come in picture only when u sold duty paid goods to any customers.
Hope this will help you.
Thx.

LCM export and import for Hyperion financial reports 11 1 2 2

Hi All,
Could you please let me know how to perform the LCM migration for HFR in 11.1.2.2 version. I am on AIX.
I am having some issues with my HFR server and so I cannot open the reports. So I am thinking if I can use LCM and export and migrate the reports to another server.
The steps I am performing to do this:
Login to HSS > Application group> Reporting and Analysis> Repository objects> report folder name> select reports> Hit on Export
Now in the exported folder I see three things:
RnA-Reporting and Analysis (Its a folder)
Export.xml
Import.xml
Now under RnA-Reporting and Analysis folder I see sub folders
resource\Repository Objects\Under this folder, I see for every report there is one .xml file and 5 other files for the same report.
Can anyone tell me how to import these reports back into the new environment?
Thanks,

Hi Celvin-
Thanks for the reply- And I followed what you recommended but none of the reports being migrated. I can only see one batch script under HSS and workspace in the target server but in the LCM export from the source server (The exported folder) i can see all the reports and the books.
Can you please advise what should be done now?
Thanks a lot!!!

Print, Export and Page Navigation Buttons in the Report

When I view a report through CR4E, the generated report has 3 buttons namely Print, Export and Page Navigation buttons. But when I click on either of the buttons I get a 'null pointer exception'. This is a critical error as I am unable to navigate past the first page. Do I have to add code to these buttons? If not, why am I getting an error? Kindly solve my problem as soon as possible.

Looking at your code it appears that you are storing the ReportSource in session prior to passing in the ResultSet. This will create a problem when a postback is made on the viewer page (which all of the viewer actions do). If you look at the sample code which is generated when you use the JSP Page Wizard you will notice that the ResultSet is passed to the ReportClientDocument object prior to it being stored in session. Then, when the page is called again this object is retrieved and the ReportSource is used by the viewer. You can quickly run the test using one of our sample reports to see what I am talking about. The code below was generated using the Consolidated Balance Sheet.rpt and did not experience any problems doing any of the viewer actions.<%@page import="com.businessobjects.samples.JRCHelperSample, com.crystaldecisions.report.web.viewer.CrystalReportViewer, com.crystaldecisions.reports.sdk.ReportClientDocument, com.crystaldecisions.sdk.occa.report.application.OpenReportOptions, com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase, com.crystaldecisions.sdk.occa.report.reportsource.IReportSource, java.sql.Connection, java.sql.DriverManager, java.sql.ResultSet, java.sql.SQLException, java.sql.Statement"%><% try { String reportName = "Sample Reports/Consolidated Balance Sheet.rpt"; ReportClientDocument clientDoc = (ReportClientDocument) session.getAttribute(reportName); if (clientDoc == null) { clientDoc = new ReportClientDocument(); // Open report clientDoc.open(reportName, OpenReportOptions._openAsReadOnly); { // **** POPULATE MAIN REPORT **** { // Connection Info for fetching the resultSet String connectStr = "jdbc:derby:classpath:/Xtreme"; String driverName = "org.apache.derby.jdbc.EmbeddedDriver"; String userName = "dbuser"; // TODO: Fill in database user String password = "dbpassword"; // TODO: Fill in valid password String query = "SELECT CUSTOMER_NAME FROM APP.CUSTOMER WHERE COUNTRY = 'Australia'"; String tableAlias = "FINANCIALS"; // TODO: Change to correct table alias JRCHelperSample.passResultSet(clientDoc, fetchResultSet(driverName, connectStr, userName, password, query), tableAlias, ""); } } // Store the report document in session session.setAttribute(reportName, clientDoc); } { // Create the CrystalReportViewer object CrystalReportViewer crystalReportPageViewer = new CrystalReportViewer(); // set the reportsource property of the viewer IReportSource reportSource = clientDoc.getReportSource(); crystalReportPageViewer.setReportSource(reportSource); // set viewer attributes crystalReportPageViewer.setOwnPage(true); crystalReportPageViewer.setOwnForm(true); // Process the report crystalReportPageViewer.processHttpRequest(request, response, application, null); } } catch (ReportSDKExceptionBase e) { out.println(e); } %><%! // Simple utility function for obtaining result sets that will be pushed into the report. // This is just standard querying of a Java result set and does NOT involve any // Crystal JRC SDK functions. private static ResultSet fetchResultSet(String driverName, String connectStr, String userName, String password, String query) throws SQLException, ClassNotFoundException { //Load JDBC driver for the database that will be queried Class.forName(driverName); Connection connection = DriverManager.getConnection(connectStr, userName, password); Statement statement = connection.createStatement(ResultSet.TYPE_SCROLL_INSENSITIVE, ResultSet.CONCUR_READ_ONLY); //Execute query and return result sets return statement.executeQuery(query); }%>Try using the code generated from the wizard to see if it works for you as well. Regards, Sean Johnson (CR4E Product Manager)

Crystal Reports export and print fails with SSL / https but works with http

Windows 2008 Server, 32-bit (IIS7)
ASP.NET 2.0
Ajax 1.0
Crystal Reports version 10.5.3700.0
http: printing works, export works
https: printing not working, only export to MS Excel and MS Word work.
I am able to generate reports using both http and https, and the toolbar icons are all showing. However, I am unable to print or export properly with SSL.
Printing prompts me with a select printer window, and then a window 'Retrieving Page 1' follow by two messages from Crystal Print Control both stating:
A communication error occured. Printing will be stopped.
Exporting generates various errors depending on which export method is being selected (however Excel and Word work over https).
I've found the same problem on this site and other forums, but never a resolution to get exporting and printing to work with SSL. Will someone please provide me assistance or possibly relay what settings they're using if they have Crystal Reports export or printing working over SSL in IIS7? Everything works fine when I change the address from https to http.
Please let me know if I can help by providing further information. We've gone through a great deal of possible solutions with code and I'm currently looking in to IIS settings again.
Thank you.

Thanks Ludek. I got it by searching KB number.
Unfortunately, it didn’t fix my problem even my IE (IE8 and IE 9) has correct setting. I double check my version. PrintControl.CAB is version 10.2.0.1146. we use VS 2005 Crystal report and VB .NET. It works fine on HTTP. But when we use HTTPS (SSL Certificate from go daddy).
1: Crystal report export
            Export to MS Excel, Word: pop us “File download”, then click “Save”. It says “Internet Explorer cannot download ReportView.aspx from my site. Internet Explorer was not able to open this internet site. the requested site is either unavailable or cannot be found. Please try it again later”
            Export to RPt, Rich text format: It says “Internet Explorer cannot download ReportView.aspx from my site. Internet Explorer was not able to open this internet site. the requested site is either unavailable or cannot be found. Please try it again later”
            Export to PDF : nothing happened.
2: Print:
            Pop up dialog to select printer, click “Print” “. Shows windows “Crystal Report Viewer” and pop us error message box. Title is “Crystal Print Control”. Message is “An communication error occurred. Printing will be stopped”. Click “OK” and pop up error message box again.
Please advise.
Thank you very much!

Deemed Exports and Exports LoUT to follow same Number Range

Hi CIN Gurus,
Client requirement is :
Domestic Excise Invoice- No Range 8500- 9999
Deemed Exports Excise Invoice No Range: 201-999
Exports under LoUT Excise Invoice No Range: 201-999
Deemed One Invoice raised it should take 201 and the next invoice raised in Exports under LoUT then it should take 202 . Common number range for Deemed exports and Exports under LoUT.
For the above to get I maintained
J_1IEXCLOC: Domestic Invoice no range : 8500 -9999 for Excise Group 21 and Series Group 10.
J_1IEXCEXP: Deemed Exports no Range: 201-999 for Excise Group 21 and Series Group 30.
J_1IEXCEXP: Exportsunder LoUT No Range: 201-999 for Excise Group 21 and Series Group 20.
I created and Excise invoice for Exports under LoUT, it saved with 201. Up to this its fine.
Next Excise Invoice I raised for Deemed Exports, it has to take 202 and save, but instead it is asking for
J_1IEXCLOC Number range to be maintained.
How to maintain same number range for Deemed Exports Excise Invoice and Exports under LoUT.
Thanks&Regards
SRI

Hi CIN Gurus,
We have asked the client to write to Excise Dept for using Local Number range for Deemed Exports.
So closing the thread. and if any suggestions welcome.
Thanks for all.
Best Regards
Sri
Edited by: Sri on Nov 18, 2008 12:58 PM

Exporting and CSS

Similar Messages

Maybe you are looking for