Exporting artboards. select in document first

On exporting artboards, I`d like to be able to shift select multiple artboards in the document window, or shift select in the artboard palette prior to export... instead of clicking the "use artboards" range function,

I'm assuming that you have the flip4mac codec installed?
If so, you have the free version which will only permit the first 30 seconds to be exported. If you want more, you'll have to pay!
However visualhub also exports wmv, so I'd weigh up the differences between flip4mac pro and visualhub if you want to continue exporting wmv's.
From the flip4mac website: Trial download limitations:
In trial mode you can export ½ the duration of your source file up to 30 seconds. In addition, a watermark will be placed on any files that you import until you upgrade to Player Pro.

Similar Messages

When I run the cursor over a template it shows several pages but when i select the document it only brings up the first two pages to edit. How do I see them all?

When I run the cursor over a template it shows several pages but when i select the document it only brings up the first two pages to edit. How do I see them all?

Skimming the templates in the Template Chooser shows you all of the pages available in the template once you open it. You can insert the one(s) you want, even more than one of any of them. Most users don't want or need all of the different pages, especially when they start the document.

Is there some way of getting adobe to work without having to download a document first, then adobe will show the pages.

Hello,
I am trying to find out what I can do, to get adobe to open up a pdf file so that I can read all pages, without having to download the document first. I get the first page only; then I download and have access to all pages. Then I delete. Seems like such a long process. Is there another way? Do I need to download a different adobe?
Thanks for your help.

How are you seeing your document on iCloud from your laptop? Web browser, or OS X Pages open dialog?
If you have MS Word or .pages formatted files parked on iCloud, the web interface will not permit their download as PDF, and in fact, PDF is an inactive option in that download menu for these word processing files. There is no copy facility available, but duplicate functionality exists from the iWork category within the iCloud web presence.
If you have Pages v4.2 or later installed on your (assumption: Mac) laptop, launch Pages and in the open file dialog, select iCloud on the dialog toolbar. Now, press and hold the option key as you drag and drop a copy of our document from iCloud to your desktop. The reverse works also.
See if you can open that document on your laptop now.

Performance issue while selecting material documents MKPF & MSEG

Hello,
I'm facing performance issues in production while selecting Material documents for Sales order and item based on the Sales order Stock.
Here is the query :
I'm first selecting data from ebew table which is the Sales order Stock table then this query.
    IF ibew[] IS NOT INITIAL AND ignore_material_documents IS INITIAL.
*     Select the Material documents created for the the sales orders.
      SELECT mkpf~mblnr mkpf~budat
             mseg~matnr mseg~mat_kdauf mseg~mat_kdpos mseg~shkzg
             mseg~dmbtr mseg~menge
       INTO CORRESPONDING FIELDS OF TABLE i_mseg
       FROM mkpf INNER JOIN mseg
       ON    mkpf~mandt = mseg~mandt
       AND   mkpf~mblnr = mseg~mblnr
       AND   mkpf~mjahr = mseg~mjahr
       FOR   ALL entries IN ibew
       WHERE mseg~matnr      = ibew-matnr
       AND   mseg~werks         = ibew-bwkey
       AND   mseg~mat_kdauf   = ibew-vbeln
       AND   mseg~mat_kdpos = ibew-posnr.
      SORT i_mseg BY mat_kdauf ASCENDING
                     mat_kdpos ASCENDING
                     budat     DESCENDING.
    ENDIF.
I need to select the material documents because the end users want to see the stock as on certain date for the sales orders and only material document lines can give this information. Also EBEW table gives Stock only for current date.
For Example :
If the report was run for Stock date 30th Sept 2008, but on the 5th Oct 2008, then I need to consider the goods movements after 30th Sept and add if stock was issued or subtract if stock was added.
I know there is an Index MSEG~M in database system on mseg, however I don't know the Storage location LGORT and Movement types BWART that should be considered, so I tried to use all the Storage locations and Movement types available in the system, but this caused the query to run even slower than before.
I could create an index for the fields mentioned in where clause , but it would be an overhead anyways.
Your help will be appreciated. Thanks in advance
regards,
Advait

Hi Thomas,
Thanks for your reply. the performance of the query has significantly improved than before after switching the join from mseg join mkpf.
Actually, I even tried without join and looped using field symbols ,this is working slightly faster than the switched join.
Here are the result , tried with 371 records as our sandbox doesn't have too many entries unfortunately ,
Results before switching the join 146036 microseconds
Results after swithing the join        38029 microseconds
Results w/o join                           28068 microseconds for selection and 5725 microseconds for looping
Thanks again.
regards,
Advait

I can't select split document option with CS6

Hi. I have Indesign CS5.5 on PC but I have been working on a document with the trial of CS6. I have set a table of contents (in the user interface, not in the book pages.)
I'm all set to export the document. In CS5.5 i have the option to tick the box Export Document at Paragraph Style and then select the style that I want my book to be split at. This always works fine.
However when using CS6 to export to epub i select the Advanced tab. The Split Document box does not list the style I want to use to split the document.
It just has Body text, Chapter Title, intro/outro and Based on Paragraphy Style Export Tag. Why can I not select the style I want that is in my document?
Is it a limitation of the trial?

In CS6, you now have the option of selecting multiple paragraph styles where you can break a page. Open the Paragraph Styles panel. From the panel menu, choose Edit All Export Tags. In the dialog, check Split EPUB beside each paragraph style where you want the EPUB file to create a page break (new XHTML file). When exporting, in the Split Document menu, choose Based on Paragraph Style Export Tags.

[SOLVED] How to export a selection in a PDF file as PDF ?

I tried a lot of PDF readers, but none of them supports exporting a selection as PDF. Okular have a similar function, but it can only save selections as JPEG or PNG. Alternatively, I can take a screenshot of a selection in one PDF reader, but still JPEG. I want to use this function to crop a selection such as formulas, vector graphics inside a PDF file. I know Preview.app in OS X works great for me. I am wondering if there is any alternatives for Linux. Thank you so much.
Last edited by mssun (2015-03-20 08:34:20)

Maybe take a look at: https://aur.archlinux.org/packages/gpdfx/ or maybe one of PDF's editors like MasterPDFEditor (free for non-commercial use), pdfeditor etc. Or one of converters like pdf2html and after conversion plug html (or the other format) into LaTeX document. Or... make OCR on PDF and then plug document saved in even plain txt format. Also, there is this utility: http://www.ctan.org/tex-archive/macros/ … b/pdfpages (and in AUR: https://aur.archlinux.org/packages/latex-pdfpages/) - maybe it will be helpful for you (I don't use LaTeX).

Exporting smartform into word document

how to export smartform into word document . i tried converting into pdf and then download but it showing run time error that conversion is not possible and also it tells that otf command // missing. is it not possible to export directly to word document instead of pdf.plz give clear description of what to be done exactly with sample codes.
marks will be rewarded.

Hi Lavanya,
Converting the output from Spool to Word is possible.
Here is the sample code.
I cut pasted a code from a link i got in the website, see if it helps.
ZSPOOL2WORD
Genera un fichero Word a partir de una orden de spool
MÓDULO : FI *
TIPO : Listado *
TITULO : Generación fichero Word
DESCRIPCION : Genera un fichero Word a partir de una orden de spool
AUTOR: Andres Picazo FECHA: 24/03/2003 *
MODIFICACIONES *
FECHA NOMBRE DESCRIPCION *
REPORT ZSPOOL2WORD
NO STANDARD PAGE HEADING
LINE-COUNT 065
LINE-SIZE 080.
INCLUDE OLE2INCL.
*----TABLAS/ESTRUCTURAS--
*----TABLAS INTERNAS--
DATA I_BUFFER(132) OCCURS 1000000 WITH HEADER LINE.
*----VARIABLES--
*----PARAMETER/SELECT-OPTIONS EN PANTALLA--
SELECTION-SCREEN BEGIN OF BLOCK BLK_PAR WITH FRAME TITLE TEXT-SEL. "Pará
PARAMETERS: P_SPOOL LIKE TSP01-RQIDENT OBLIGATORY.
SELECTION-SCREEN END OF BLOCK BLK_PAR.
SELECTION-SCREEN BEGIN OF BLOCK BLK_WOR WITH FRAME TITLE TEXT-WOR.
PARAMETERS: P_WORD AS CHECKBOX DEFAULT 'X'.
PARAMETERS: P_FWOR LIKE RLGRAP-FILENAME DEFAULT 'C:MAYOR.DOC'.
PARAMETERS: P_PLAN LIKE RLGRAP-FILENAME
DEFAULT 'D:DATOSAPISMAYORPLANTILLA LIBRO MAYOR.DOC'.
SELECTION-SCREEN END OF BLOCK BLK_WOR.
SELECTION-SCREEN BEGIN OF BLOCK BLK_FIC WITH FRAME TITLE TEXT-FIC.
PARAMETERS: P_CTXT AS CHECKBOX DEFAULT ''.
PARAMETERS: P_FTXT LIKE RLGRAP-FILENAME DEFAULT 'C:MAYOR.TXT'.
SELECTION-SCREEN END OF BLOCK BLK_FIC.
LOGICA DEL PROGRAMA
INITIALIZATION
INITIALIZATION.
START-OF-SELECTION.
START-OF-SELECTION.
PERFORM LEER_SPOOL.
IF NOT P_CTXT IS INITIAL.
PERFORM GRABA_FICHERO.
ENDIF.
IF NOT P_WORD IS INITIAL.
PERFORM LANZA_WORD.
ENDIF.
FORMS ADICIONALES
*& Form LEER_SPOOL
Lee la orden de spool en el buffer
FORM LEER_SPOOL.
CALL FUNCTION 'RSPO_RETURN_ABAP_SPOOLJOB'
EXPORTING
RQIDENT = P_SPOOL
FIRST_LINE = 1
LAST_LINE = 9999999
TABLES
BUFFER = I_BUFFER
EXCEPTIONS
NO_SUCH_JOB = 1
NOT_ABAP_LIST = 2
JOB_CONTAINS_NO_DATA = 3
SELECTION_EMPTY = 4
NO_PERMISSION = 5
CAN_NOT_ACCESS = 6
READ_ERROR = 7
OTHERS = 8.
IF SY-SUBRC NE 0.
MESSAGE E398(00) WITH 'Error' SY-SUBRC
'al leer la orden de spool' P_SPOOL.
ENDIF.
ENDFORM. " LEER_SPOOL
*& Form GRABA_FICHERO
Graba el contenido del spool a fichero de texto.
FORM GRABA_FICHERO.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
BIN_FILESIZE = ' '
CODEPAGE = ' '
FILENAME = P_FTXT
FILETYPE = 'ASC'
MODE = ' '
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
COL_SELECT = ' '
COL_SELECTMASK = ' '
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
TABLES
DATA_TAB = I_BUFFER
FIELDNAMES =
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
INVALID_FILESIZE = 3
INVALID_TABLE_WIDTH = 4
INVALID_TYPE = 5
NO_BATCH = 6
UNKNOWN_ERROR = 7
GUI_REFUSE_FILETRANSFER = 8
OTHERS = 9.
IF SY-SUBRC NE 0.
MESSAGE E398(00) WITH 'Error' SY-SUBRC
'al grabar el fichero' P_FTXT.
ENDIF.
ENDFORM. " GRABA_FICHERO
*& Form LANZA_WORD
Abre la plantilla de Word y pega el contenido del portapapeles.
FORM LANZA_WORD.
DATA: WORDAPP TYPE OLE2_OBJECT,
DOCUMENT TYPE OLE2_OBJECT,
SELECTION TYPE OLE2_OBJECT.
Copia el contenido del buffer en el portapeles
CALL FUNCTION 'CLPB_EXPORT'
TABLES
DATA_TAB = I_BUFFER
EXCEPTIONS
CLPB_ERROR = 1
OTHERS = 2.
Abre Word
CREATE OBJECT WORDAPP 'word.application'.
IF SY-SUBRC NE 0.
MESSAGE E398(00) WITH 'No se ha podido abrir el Word'.
ENDIF.
Lo pone en visible
SET PROPERTY OF WORDAPP 'Visible' = 1.
Cogemes el objeto documento
CALL METHOD OF WORDAPP 'Documents' = DOCUMENT.
Abrimos el fichero plantilla
IF P_PLAN IS INITIAL.
CALL METHOD OF DOCUMENT 'Add'.
ELSE.
CALL METHOD OF DOCUMENT 'Open' EXPORTING #1 = P_PLAN.
IF SY-SUBRC NE 0.
MESSAGE E398(00) WITH 'Error al leer el fichero plantilla'.
ENDIF.
ENDIF.
Coge el objeto selección
CALL METHOD OF WORDAPP 'Selection' = SELECTION.
Pega el contenido del portapapeles
CALL METHOD OF SELECTION 'Paste'.
IF SY-SUBRC NE 0.
MESSAGE E398(00) WITH 'Error al pegar contenido del portapapeles'.
ENDIF.
Graba el fichero
CALL METHOD OF WORDAPP 'ActiveDocument' = DOCUMENT.
CALL METHOD OF DOCUMENT 'SaveAs' EXPORTING #1 = P_FWOR.
IF SY-SUBRC NE 0.
MESSAGE E398(00) WITH 'Error al grabar el nuevo documento'.
ENDIF.
Cierra Word
CALL METHOD OF WORDAPP 'Quit'.
IF SY-SUBRC NE 0.
MESSAGE E398(00) WITH 'Error al cerrar Word'.
ENDIF.
ENDFORM. " LANZA_WORD
check this also.................
By using FM RSPO_RETURN_ABAP_SPOOLJOB you will be able to get the ASCII text of your Spool, which you can download to your local HD and open with M$ Word.
Check the function module
CALL FUNCTION 'RSPO_DOWNLOAD_SPOOLJOB'
     EXPORTING
          id    = p_spool
          fname = p_file.
Give the file extn as .DOC. it will downlaod it as a
Word doc.But I fear you wont get the table formats and
all.
~~Guduri

Exporting Artboards = Artboard size + 1px

Hello,
I have troubles exporting artboards in png file :
I am making artboard of 100px by 100px in order to make a button when I export it (in 72 DPI) the result is 101px by 101px.
So how can I export in the size i define the artboard ?
Thankyou in advance.
For information I am usind illustrator CC on an iMac.

Hey, I had this same issue even in Illustrator CC 2014. I was looking around and as far as I know, it hasn't been solved, so I thought I should share my findings. Not exactly "fixing" it, but you get what you want.
Dump out artboards as separate illustrator files:
     1. Open your .ai file with all of your artboards
     2. File>Save As
     3. Browse to an empty folder on your desktop or something and hit save
     4. Make sure "Save each artboard as a separate file" is checked and hit ok
          ~Wait for all of the artboards to export to illustrator files
Create an action for batching those illustrator files
     1. Open an illustrator file with an artboard in it
     2. go to Window>Actions
     3. Create a new Action,name it something, and hit record
     4. Go to File>Save for Web
     5. Make sure "Clip to Artboard" is checked on, it is the file type you want, and hit save
     6. Save the file anywhere you want (you can delete it afterwards)
     7. Stop recording
     8. Toggle the Dialog off for the action (in the Actions Window, second column by the checkmark)
     9. Click the Options button in the upper right of the Actions Window, and select Batch at the bottom
     10. Choose your source folder (The folder you dumped the illustrator files into)
     11. Check "Override Action "Export" Commands"
     12. Choose an empty folder for your pngs to be dumped into.
     13. Make sure the Destination is set to Save and Close, and hit OK
          ~Wait for it to Batch your illustrator files.
That should be all you need to do to get your artboards exported to pngs without that annoying 1px error. Not the quickest thing in the world, but still way faster than saving every single artboard for web, one at a time.
I hope this helps.

Execute selection report SDSPESTA first-transaction code v23

we are into upgradation project to ecc6
when i run the transaction V23 (SD documents blocked for billing) i am getting the information (Execute selection report SDSPESTA first)
i need to get rid of this
wt i need to do?
Regards
Anil

Just do what it says - run SDSPESTA report in SE38 (or ask an ABAPer to do it for you if you don't have access). This program updates the Overall Block status in VBUP and VBUK tables. Obviously, in your system this status is not filled in currently (possibly due to a configuration change).
Also see this thread:
V23 not pulling any data

How do I archive or 'export' mailbox folders to DOCUMENTS?

How do I archive or 'export' mailbox folders to DOCUMENTS?

Hey there BethWB,
It sounds like you are wanting to export your Emails as files, rather than archiving your entire mailbox in one file. You can do that in a few ways, and this article will help you do that in Mavericks:
Mail (Mavericks): Save messages as files or PDFs
http://support.apple.com/kb/PH14913
To save messages as files to use in other apps, select one or more messages or conversations, then choose File > Save As.Rich Text Format retains formatting, but Plain Text does not. Raw Message Source saves messages in mbox format, which can be imported into Mail and most other email apps. With Raw Message Source, the header is visible and an encoded version of attachments is retained.
To save messages as PDF documents, select one or more messages, then choose File > Export as PDF.
To save a single message in mbox format, drag the message onto your desktop. To reopen the message in Mail, double-click the file.
If you ARE wanting to archive the entire mailbox to one file, this will help you do that:
Mail (Mavericks): Archive messages
http://support.apple.com/kb/PH14894
Thank you for using Apple Support Communities.
All the best,
Sterling

Trying to print a document from Pages, when I go to print it won't let me select the document. It is grey and I can't click it. What should I do?

Trying to print a document from Pages, when I go to print it won't let me select the document. It is grey and I can't click it. What should I do?

I'm not clear on how you're trying to print. When you select Print from the file menu in Pages the current document is already selected. Perhaps you need to show the details in the print dialog. The first screenshot is from Mountain Lion the second from an earlier OS where you click the blue down-facing triangle button (sorry, I can't remember which one).

Exporting A Selection of Records to Excel

Hi All,
This is my first ever question to a forum, so please go easy on me! I'm also very new to Access and VBA. I'm building a database that stores (in related tables): TradingName, PropertyName, and PaddockName (as well as other relevant details). I have combined
(Joined) the data I require into a table as well as a query.
Now I want to export the Paddocks and Properties for each client. I have been able to export all clients and Paddocks (All Records) into Excel as well as individual Client and Paddock (Individual Record). But I want to be able to export all paddocks for
a property or a client (multiple records for a client or property).
My code is working for both scenarios (All Records and Individual Records) above but I'd like to know how to write code to export only selected Client or Property which is selected via a combobox.
The Code I have used seems to be typical on all forums I have visited, but none does what I want/need.
All help Appreciated
Thanks
Nath
This sub exports a SINGLE Record
'This Sub Exports ALL Records
Private Sub btnExportXls_Click()
Dim db As DAO.Database
Dim rs As DAO.Recordset
'Set db = DAO.DBEngine.Workspaces(0).OpenDatabase("C:\database.mdb")
Set db = CurrentDb
' Set rs = db.OpenRecordset("MasterSummary", dbOpenSnapshot)
Set rs = db.OpenRecordset("tblExpXlsClientPropPdkDetails", dbOpenSnapshot)
'Start a new workbook in Excel
Dim oApp As New Excel.Application
Dim oBook As Excel.Workbook
Dim oSheet As Excel.Worksheet
Set oBook = oApp.Workbooks.Add
Set oSheet = oBook.Worksheets(1)
'Add the field names in row 1
Dim i As Integer
Dim iNumCols As Integer
iNumCols = rs.Fields.Count
For i = 1 To iNumCols
oSheet.Cells(1, i).Value = rs.Fields(i - 1).Name
Next
'Add the data starting at cell A2
oSheet.Range("A2").CopyFromRecordset rs
'Format the header row as bold and autofit the columns
With oSheet.Range("a1").Resize(1, iNumCols)
.Font.Bold = True
.EntireColumn.AutoFit
End With
oApp.Visible = True
oApp.UserControl = True
'Close the Database and Recordset
rs.Close
db.Close
End Sub
This Sub Exports A Single Record (Paddock) and is commented out as I trialed the other sub.
'Private Sub btnExportXls_Click()
'' The following Sub only exported 1 record at a time and only copied data to selected cells, it doesn't move to next free cells.
''Export Selected Client/Property to Excel
''First you must set a Reference to the Microsoft Excel XX.X Object Library
' Dim appExcel As Excel.Application
' Dim wrkBook As Excel.Workbook
' Set appExcel = New Excel.Application
' Set wrkBook = appExcel.Workbooks.Open(CurrentProject.Path & "\ClientPropertyPdkDetails.xlsx")
' appExcel.Visible = True 'Make Excel Window Visible
''Make Batch Sheet the active Worksheet
' wrkBook.Worksheets("Client Property Pdk").Activate
' With wrkBook.ActiveSheet
' .Range("A2").Value = Me![Client_ID]
' .Range("B2").Value = Me![TradingName]
' .Range("C2").Value = Me![Property_ID]
' .Range("D2").Value = Me![Property]
' .Range("E2").Value = Me![ID]
' .Range("F2").Value = Me![PaddockName]
' .Range("G2").Value = Me![PaddockArea]
' .Range("H2").Value = Me![ArablePdkArea]
' .Range("I2").Value = Me![MonitoredPdk]
' .Range("J2").Value = Me![SoilSamplePdk]
' .Columns("A:J").AutoFit 'Autofit Columns A thru J to hold contents
' End With
''DoCmd.OutputTo acOutputQuery, "qryClientPropertyPaddockJoined", acFormatXLSX, "K:\Dropbox\1a Graminus Consulting\Graminus Database\ClientPropertyPdkDetails.xlsx", , , acExportQualityPrint
'End Sub

Hi All,
Thanks for your help and input much appreciated! I think I was in a rutt and trying to be too tricky (I think). I have since changed tact and created a Public Function (Below) that creates a temporary query and export that instead. It works a treat.
Thanks Again
Nath
Public Function CreateQueryDAO()
'Purpose: Create a query based on Clients Property Name to Export to Excel
Dim db As DAO.Database
Dim qdf As DAO.QueryDef
Set db = CurrentDb()
'The next line creates and automatically appends the QueryDef.
Set qdf = db.CreateQueryDef("qryPropertyDetails")
'Set the SQL property to a string representing a SQL statement.
qdf.sql = "SELECT tblExpXlsClientPropPdkDetails.* FROM tblExpXlsClientPropPdkDetails WHERE [Property_ID] =" & Forms![frmExportClientPropertyPaddockExl].txtPropertyID
'Do not append: QueryDef is automatically appended!
Debug.Print "qry[qryPropertyDetails] created."
'Start a new workbook in Excel
Dim oApp As New Excel.Application
Dim oBook As Excel.Workbook
Dim oSheet As Excel.Worksheet
Dim rs As DAO.Recordset
Set rs = db.OpenRecordset("qryPropertyDetails", dbOpenSnapshot)
Set oBook = oApp.Workbooks.Add
Set oSheet = oBook.Worksheets(1)
'Add the field names in row 1
Dim i As Integer
Dim iNumCols As Integer
iNumCols = rs.Fields.Count
For i = 1 To iNumCols
oSheet.Cells(1, i).Value = rs.Fields(i - 1).Name
Next
'Add the data starting at cell A2
oSheet.Range("A2").CopyFromRecordset rs
'Format the header row as bold and autofit the columns
With oSheet.Range("a1").Resize(1, iNumCols)
.Font.Bold = True
.EntireColumn.AutoFit
End With
oApp.Visible = True
oApp.UserControl = True
Debug.Print "Property Exported to Excel."
'Delete new Query.
db.QueryDefs.Delete "qryPropertyDetails"
Debug.Print "qry[qryPropertyDetails] Deleted."
'Close the Database and Recordset
rs.Close
db.Close
Set qdf = Nothing
Set db = Nothing
'Source: http://allenbrowne.com/func-dao.html#CreateQueryDAO
Private Sub btnCreateQry_Click()
CreateQueryDAO
End Sub

C# compiling error: 'System.Array' does not contain a definition for 'Select' and no extension method 'Select' accepting a first argument of type 'System.Array' could be found (are you missing a using directive or an assembly reference?)

Hello experts,
I'm totally new to C#. I'm trying to modify existing code to automatically rename a file if exists. I found a solution online as follows:
string[] allFiles = Directory.GetFiles(folderPath).Select(filename => Path.GetFileNameWithoutExtension(filename)).ToArray();
string tempFileName = fileName;
int count = 1;
while (allFiles.Contains(tempFileName ))
tempFileName = String.Format("{0} ({1})", fileName, count++);
output = Path.Combine(folderPath, tempFileName );
string fullPath=output + ".xml";
However, it gives the following compilation errors
for the Select and Contain methods respectively.:
'System.Array' does not contain a definition for 'Select' and no extension method 'Select' accepting a first argument of type 'System.Array' could be found
(are you missing a using directive or an assembly reference?)
'System.Array' does not contain a definition for 'Contains' and no extension method 'Contains' accepting a first argument of type 'System.Array' could be
found (are you missing a using directive or an assembly reference?)
I googled on these errors, and people suggested to add using System.Linq;
I did, but the errors persist.
Any help and information is greatly appreciated.
P. S. Here are the using clauses I have:
using System;
using System.Data;
using System.Windows.Forms;
using System.IO;
using System.Collections.Generic;
using System.Text;
using System.Linq;

Besides your issue with System.Core, you also have a problem with the logic of our code, particularly your variables. It is confusing what your variables represent. You have an infinite loop, so the last section of code is never reached. Take a look
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.IO;
namespace consAppFileManipulation
class Program
static void Main(string[] args)
string fullPath = @"c:\temp\trace.log";
string folderPath = @"c:\temp\";
string fileName = "trace.log";
string output = "";
string fileNameOnly = Path.GetFileNameWithoutExtension(fullPath);
string extension = Path.GetExtension(fullPath);
string path = Path.GetDirectoryName(fullPath);
string newFullPath = fullPath;
string[] allFiles = Directory.GetFiles(folderPath).Select(filename => Path.GetFileNameWithoutExtension(filename)).ToArray();
string tempFileName = fileName;
int count = 1;
//THIS IS AN INFINITE LOOP
while (allFiles.Contains(fileNameOnly))
tempFileName = String.Format("{0} ({1})", fileName, count++);
//THIS CODE IS NEVER REACHED
output = Path.Combine(folderPath, tempFileName);
fullPath = output + ".xml";
//string fullPath = output + ".xml";
UML, then code

How to get value in Second Drop Down based on selection made in first dropd

Hi All,
I have a table with first two columns as dropdown.
The values in first drop down are fixed. However the value in second dropdown should be populated based on selection made in first .
e.g
First Column had different departments say IT, SALES, HR.
Based on department selected I have to populate employee of that department.
For first dropdown I have taken Drop down by index.
What should I select for second drop down and achieve desired functionality? Please guide.
Regards,
Madhvika

Hi
Use drop down by key for fixed values IT, SALES, HR. create on_select action for that drop down.
in on_select method code like this..
DATA lo_nd_segment1 TYPE REF TO if_wd_context_node.
DATA lo_el_segment1 TYPE REF TO if_wd_context_element.
DATA ls_segment1 TYPE wd_this->Element_segment1.
data lt_segment1 type wd_this->elements_segment1.
DATA lv_segment TYPE wd_this->Element_segment1-segment.
data lr_column type ref to cl_wd_table_column.
navigate from <CONTEXT> to <SEGMENT1> via lead selection
lo_nd_segment1 = wd_context->get_child_node( name = wd_this->wdctx_segment1 ).
get element via lead selection
lo_el_segment1 = lo_nd_segment1->get_element( ).
lo_el_segment1 = WDEVENT->GET_CONTEXT_ELEMENT( 'CONTEXT_ELEMENT' ).
get all declared attributes
lo_el_segment1->get_static_attributes(
IMPORTING
static_attributes = ls_segment1 ).
now ls_segment1 contains your first drop down selection value.
DATA : lv_dropdown type string .
lv_dropdown = ls_segment1-segment.
if lv_dropdown = 'IT'.
// here fill your second drop down based on IT value.
endif.
Hope it solves.
Cheers,
Kris.

Exporting sounds in Pages document to PC users

Is it possible to export a Pages document with sound clips embedded, to a PC user?
I tried exporting as a PDF but even when I opened this on my iMac with Preview or Adobe Reader, the sound clip icon was missing.
I exported as a Word document (which created the .doc file and a folder with the media files in it) and when I moved these to a PC and tried opening the .doc in Word general formatting was intact and there was an icon for the sound clip, but I couldn't seem to click or double click and get the sounds to play.
I tried exporting as an HTML and while the sounds would play, the general formatting was lost.
Any hope of doing this? (My intention would be to email someone with a PC with the document (and perhaps media files) attached.

Thanks for the reply, Magnus.
I guess I have to accept this, but one thing that puzzles me about your reply:
"In theory both Word and PDF should take embedded sounds, but Apple has not implemented the feature"
This implies it is the Apple software that is the weak link. Yet in a Pages document I can clearly have the imbedded audio. So is it in their implementation of their export features where the audio is stripped out or is it the inability of the 3rd party products I tried (Adobe Reader and Word) to handle what might really be imbedded?

Exporting artboards. select in document first

Similar Messages

Maybe you are looking for