Exporting Data to Excel

Hi guys! I'm pretty stuck atm so any help would be most gratefully received! I am now at a point where my program is controlling everything properly and reading the data from the logger correctly.
I am using 8.5, using the DAQ assistant sampling at 10Khz reading the samples of the buffer at 1khz, across 8 channels and plotting this to a waveform chart. So far so good..
My problem lies in exporting this to Excel, I started using the write to spreadsheet vi but this never properly worked and straight to excel would make life a whole lot easier!
1) I'm expecting roughly 50,000 data points (5 seconds at 10kHz) off each channel, but is this more than Excel can handle? Anyway round this or do I need to take every 10th value or similar?
2) I am only getting roughly 50 data points for each channel! What is going on here? I have tried converting the DDT to an array, autoindexing and then reading this outside the while loop. I have tried convert DDT to array, then using buil array function inside the while loop then exporting this. All to no avail!
3) My values are roughly of the order or 0.00001 or lower, I can only get Excel to write values to 0.0001 decimal places, can i change this at all??
I am trying to use the Excel Vi's supplied under the report generation pallett. So my problem is I'm expecting thousands of data points, I'm getting maybe a few hundred 0.0000 with the occasional 0.0001 thrown in for fun!
Thanks
Jon

Hi Jon,
in this vi I cannot find any writing routines... Maybe they are hidden in one of those missing subvis...
Cleaned up the attachment nevertheless
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Attachments:
Quench Velocity.vi ‏140 KB

Similar Messages

Export data into Excel from PL/SQL Block

Hi,
Please tell me how to export data into excel comming out from PL/SQL code in APEX.
We can simply export data into excel if we have Report region, but my query is dynamic for which i had to use PL/SQL block. Now i want to export that data into excel.
Thanks & Regards,
Smith

Hi,
Take a look here http://spendolini.blogspot.com/2006/04/custom-export-to-csv.html
Regards
Paul

Export data to Excel

Hello All,
            I am trying to export data to Excel from a report output. Its a simple report. I have tried the below FM
CALL FUNCTION 'RH_START_EXCEL_WITH_DATA'
EXPORTING
DATA_FILENAME             =
DATA_PATH_FLAG            = 'W'
DATA_ENVIRONMENT          =
DATA_TABLE                =
MACRO_FILENAME            =
MACRO_PATH_FLAG           = 'E'
MACRO_ENVIRONMENT         =
WAIT                      = 'X'
DELETE_FILE               = 'X'
EXCEPTIONS
NO_BATCH                  = 1
EXCEL_NOT_INSTALLED       = 2
INTERNAL_ERROR            = 3
CANCELLED                 = 4
DOWNLOAD_ERROR            = 5
NO_AUTHORITY              = 6
FILE_NOT_DELETED          = 7
OTHERS                    = 8
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
This FM when executed without passing any data is able to open an empty excel sheet but when I try to pass an internal table to DATA_TABLE its giving a dump. The run time error is CALL_FUNCTION_CONFLICT_TYPE.
Error:
**"The function module interface allows you to specify only fields
of a particular type under "TABNAME". The field "ITAB1" specified here
has a different field type."**
Please let me know if Im missing something.
Thanks in advance.

Hi SAP,
Simply List -> Save -> File -> spreadsheet -> file.xls
Or check this weblog..
<a href="/people/dennis.vandenbroek/blog/2007/02/14/simple-function-module-to-export-any-internal-table-to-ms-excel:///people/dennis.vandenbroek/blog/2007/02/14/simple-function-module-to-export-any-internal-table-to-ms-excel
or
try this code..
DATA : file_name TYPE ibipparms-path,
lc_filename TYPE string.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
IMPORTING
file_name = file_name .
lc_filename = file_name.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = lc_filename
filetype = 'DAT'
TABLES
data_tab = gt_itab.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Revert back for more help
Reward points if helpful
Regards
Naresh

Problem while exporting data to Excel sheet.......

Hi
I have written the following code to export data to excel sheet...
data:
       conv_out TYPE REF TO cl_abap_conv_out_ce,
       content TYPE xstring.
data : itab_slsrl type table of znslsrlitm.
data: xml_out TYPE string.
Data:
Node_slsrl type ref to If_Wd_Context_Node,
Elem_slsrl type ref to If_Wd_Context_Element,
Stru_slsrl type ref to if_wd_context_element .
call transformation ('ID') source tab = itab_slsrl[] result xml xml_out.
CALL FUNCTION 'CRM_IC_XML_STRING2XSTRING'
EXPORTING
INSTRING = xml_out
IMPORTING
OUTXSTRING = content.
conv_out = cl_abap_conv_out_ce=>create( encoding = 'UTF-8' ).
DATA: lv_filename TYPE string.
conv_out->convert( exporting data = xml_out IMPORTING buffer = content ).
cl_wd_runtime_services=>attach_file_to_response(
i_filename = 'Sales_order_release.xls'
i_content = content
i_mime_type = 'application/msexcel'
i_in_new_window = i_in_new_window
i_inplace = i_inplace ).
But when i am trying to export data to excel sheet i am getting
following error...
"Switch from current encode to specified encoding is not supported"
"<?xml version="1.0" encoding='utf-16"?>"
if i change encoding utf-8 to utf-16 in my code its giving dump..
"The conversion of certain code pages is not supported"
Did i miss any step...?
How to resolve this problem please help me....
Thanks & Regards
Sowmya.....

Hi Sowmya,
I do had a similar issue, but I avoided that problem temporarily by commenting the following code.
    l_conv_out = cl_abap_conv_out_ce=>create( encoding = 'UTF-8' ).
attach the first file
l_conv_out->convert( exporting data = l_xml_out IMPORTING buffer = l_content ).
Once this is done, you can export the data to Excel and open it and see too...But this is a temporary solution only. Implement this solution to get to understand more flaws of this.
Regards
Raja Sekhar
Edited by: Raja Sekhar on Dec 26, 2007 7:51 PM

Problem in exporting data to excel in nwds 7.3

Hi All,
I was using the following code for exporting data to excel in NWDS 7.3
private IWDCachedWebResource getCachedWebResource(byte[] file, String name,
WDWebResourceType type) {
IWDCachedWebResource cachedWebResource = null;
if (file != null) {
cachedWebResource = WDWebResource.getWebResource(file, type);
cachedWebResource.setResourceName(name);
return cachedWebResource;
I was getting the error in the following line cachedWebResource = WDWebResource.getWebResource(file, type); when I clicked the quick help it ststed the getWebResource method is depricated. Kindly provide some assistance on what is the new method in its place.
Thank you
Regards,
Preet Kaur

Hi Ganesh,
Thanks that worked fine, but when we go further we are facing problem ie
byte[] excelXMLFile;
IWDCachedWebResource cachedExcelResource = null;
String fileName = dataNode.getNodeInfo().getName() + ".xls";
try {
// create Excel 2003 XML data as a byte array for the given context node,
// attributes and headers
excelXMLFile = toExcel(dataNode, columnInfos).getBytes("UTF-8");
// create a cached Web Dynpro XLS resource for the given byte array
// and filename
cachedExcelResource = getCachedWebResource(
excelXMLFile, fileName, WDWebResourceType.XLS);
// Store URL and file name of cached Excel resource in context.
if (cachedExcelResource != null) {
wdContext.currentContextElement().setExcelFileURL(
cachedExcelResource.getURL());
wdContext.currentContextElement().setExcelFileName(
cachedExcelResource.getResourceName());
// Open popup window with a link to the cached Excel file Web resource.
openExcelLinkPopup();
} else {
wdComponentAPI.getMessageManager().reportException(
"Failed to create Excel file from table!", true);
} catch (UnsupportedEncodingException e) {
wdComponentAPI.getMessageManager().reportException(
e.getLocalizedMessage(), true);
} catch (WDURLException e) {
wdComponentAPI.getMessageManager().reportException(
e.getLocalizedMessage(), true);
The above bold lines also would need to be converted to inputstream, but not sure how to correct that
We are following the below pdf for the implementation.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/edc2f3c2-0401-0010-8898-acd5b6a94353?QuickLink=index&overridelayout=true
Thank you
Regards,
Jaspreet Kaur

Export data to excel and table column headers

I noticed that with LV 2012 when I call the method "Export Data to Excel" for a table, the table headers (= column names) are not exported to excel.
Am I right? I think that the column names should be exported too...
As a matter of fact when you call the method "Export to simplified image" the column names are included
How can I export the table column names to excel?
Vix
In claris non fit interpretatio
Using LV 2013 SP1 on Win 7 64bit
Using LV 8.2.1 on WinXP SP3
Using CVI 2012 SP1 on Win 7 64bit, WinXP and WinXP Embedded
Using CVI 6.0 on Win2k, WinXP and WinXP Embedded

In this document there is a full description of how to export data from LabVIEW to Excel.
Using a table, the method "Export data to excel" should export the "currently selected data", and data can be programmatically selected using ActiveCell property (as described here).
With ActiveCell I can select the column headers too (using negative numbers for row and/or column), and I do this.
And so I expect that when I select "Export data to Excel", the column headers should be exported too (because I selected them!).
I think that the actual behavior is a bug, rather that an expected behavior.
Don't you agree?
Vix
In claris non fit interpretatio
Using LV 2013 SP1 on Win 7 64bit
Using LV 8.2.1 on WinXP SP3
Using CVI 2012 SP1 on Win 7 64bit, WinXP and WinXP Embedded
Using CVI 6.0 on Win2k, WinXP and WinXP Embedded

Which version of the Forms Central subscription will allow me to export data to excel (CSV file)?

Which version of the Forms Central subscription will allow me to export data to excel (CSV file)?

Hi Heather 349
I believe you can do it with both FormsCentral Basic and FormsCentral PLUS
Also Refer : Tutorial: Exporting Responses to Excel, CSV or PDF

How export data in Excel From Visual Composer

Hay everybody,
I would like to export my data result from Visual Composer to Excel. I've tried with an export data buton, but the exported file has a very bad format in Excel. I've tried an hyperlink buton which contain the Reptname data of the query too, but I can't keep my filters. This second solution can be nice for the format. If anyone knows how I can keep my filters, I would be fine.
Thanks

I did not get solution by using BW 3.5 , can we export data to Excel ? I am refering
[HOW TO EXPORT DATA FROM VISUAL COMPOSER|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/47fe4fef-0d01-0010-6f87-ed8ecb479123?overridelayout=true] following link??

Export data to excel using DOI(desktop Office integration) technique

Hi Experts,
I have the requirement to export data to excel file, I have some idea using OLE but no idea of exporting to excel using DOI, Please help me by providing sample code for it.
My requirement also include merging of cells and coloring of cells.
Thanks
Rohit

For merging of cells you can refer following code!
[Merging of cells.|https://www.sdn.sap.com/irj/scn/wiki?path=/display/community/oleconceptfordownloadingthereportoutputintoexcel]
Regards,
Lalit Mohan Gupta.

Export data to excel in alv

hi everybody ,
could you give me an example about export data to excel with no ole objects?

You can use FM - ALV_XXL_CALL , it exports the data with formatting and column heading.
REPORT ZSKC_ALV_XXL.
TYPE-POOLS : KKBLO.
DATA : ITAB LIKE T100 OCCURS 0,
       T_FCAT_LVC TYPE LVC_S_FCAT OCCURS 0 WITH HEADER LINE,
       T_FCAT_KKB TYPE KKBLO_T_FIELDCAT.
START-OF-SELECTION.
* Get data.
SELECT * UP TO 20 ROWS
FROM   T100
INTO   TABLE ITAB
WHERE SPRSL = SY-LANGU.
CHECK SY-SUBRC EQ 0.
* Create the field catalog.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
   EXPORTING
      I_STRUCTURE_NAME             = 'T100'
    CHANGING
      CT_FIELDCAT                  = T_FCAT_LVC[]
    EXCEPTIONS
      INCONSISTENT_INTERFACE       = 1
      PROGRAM_ERROR                = 2
      OTHERS                       = 3.
CHECK SY-SUBRC EQ 0.
* make sure you pass the correct internal table name in the field catalog.
t_fcat_lvC-tabname = 'ITAB'.
MODIFY T_FCAT_LVC TRANSPORTING TABNAME WHERE TABNAME NE SPACE.
* Transfer to KKBLO format.
CALL FUNCTION 'LVC_TRANSFER_TO_KKBLO'
    EXPORTING
      IT_FIELDCAT_LVC                 = T_FCAT_LVC[]
    IMPORTING
      ET_FIELDCAT_KKBLO               = T_FCAT_KKB
   EXCEPTIONS
     IT_DATA_MISSING                 = 1
     IT_FIELDCAT_LVC_MISSING         = 2
     OTHERS                          = 3.
CHECK SY-SUBRC EQ 0.
* Call XXL.
CALL FUNCTION 'ALV_XXL_CALL'
    EXPORTING
      I_TABNAME                    = 'ITAB'
      IT_FIELDCAT                  = T_FCAT_KKB
    TABLES
      IT_OUTTAB                    = ITAB[]
    EXCEPTIONS
      FATAL_ERROR                  = 1
      NO_DISPLAY_POSSIBLE          = 2
      OTHERS                       = 3.
IF SY-SUBRC <> 0.
ENDIF.

Export data to excel from jsf

How can I export data to excel sheet using jsf ..Any components available..
Thanks in advance.

There is no JSF component which does all the task, but there are enough ways to achieve this. You can use a reporting framework, such as JasperReports or BIRT. You can use a Java Excel API, such as Apache POI HSSF or Andy Khan's JExcelAPI. You can write a plain vanilla CSV or HTML TABLE file which can also be read by Excel.

Export data to excel scientific notation

Hello,
How can I export data to excel such as 9900007600000018463000, 9900007600000018473000, etc. without transforming them into scientific numbers like 9,90000760000001E+21 ?
Thank you for your help

Sorry that my suggestion did not work. I have experimented with excel and could not get it to retain the precision on very large numbers for any numeric formatted fields. The idea I have for you is to create a table with your big number column defined as varchar2. Copy the data from the original table into the new table "insert into bignumber_varchar_table varchar_column select bignumber_table from bignumber;". Then do the export from the new table. This will keep the data as text and then excel retains the precision. Because it is text it will be displayed left justified. Right click and choose format cell, click on alignment, and set horizontal to right if you want it to look like a number in the spread sheet. Unfortunately, if you try to do calculations with it, the calculation appears to loose the precision.

Export data to excel from oracle ?

Hi,
Is it possible to export the table data to an excel sheet??? If yes, please let me know how to achieve it !!!
Regards
Venkat

Numerous threads about this issue....
Just a pair of example...
Export from oracle to excel
Export Data to Excel using PL/SQL
If you were not satisfied ... , you could search extensively the forums:
http://forums.oracle.com/forums/search.jspa?threadID=&q=export+data+to+excel&objID=f75&dateRange=lastyear&userID=&numResults=15
Greetings...
Sim

Export Data to Excel with commands API

Hello,With commands API, we want to add the possibility to Export Data to Excel to our users, but we don't want to give them the acess to the mouse right button, because they can change others things that we don't want.How can we do that ?Thanks.

Hello,With commands API, we want to add the possibility to Export Data to Excel to our users, but we don't want to give them the acess to the mouse right button, because they can change others things that we don't want.How can we do that ?Thanks.

Export Data To Excel From DVWP

Hi,
I created DVWP in SPD.
Is it possible to Export Data To Excel From DVWP?
What should I do?
Thanks in advance!

Hello,
try this:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/c2e2eb0c-202e-49c1-80cb-2fbf5159b10c/how-to-export-dataview-webpart-to-an-excel-file?forum=sharepointcustomizationprevious
Via script:
http://ameyakawale.wordpress.com/2011/08/04/exporting-dataview-webpart-data-into-excel-using-javascript/
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/e01ed0bb-63bc-49fc-b1ff-5d2342f897ae/exporting-data-view-webpart-to-excel-spreadsheet?forum=sharepointcustomizationprevious
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

How to export Data to excel in wp8

Hi,
I have a requirement like export data to excel. I have googled and find OpenXML.Silverlight.Spreadsheet.WP8.dll . Its working good. I want to know is there any Other way to create an excel file and export data to Excel sheet in WP8..?
I googled and find EPPlus.dll but it is throwing an exception. The exception is "A reference to a higher version or incompatible assembly cannot be added to a project."
Is there any another way to export data to excel sheet.? Please support me with answers.
Thanks in Advance.

Syncfusion controls for windows phone has a library for creating spreadsheets xlsio. It i free if you qualify for community license
https://www.syncfusion.com/products/communitylicense
https://www.syncfusion.com/products/file-formats/xlsio

Exporting Data to Excel

Similar Messages

Maybe you are looking for