Exporting podcast results in a 40k file and 0:00 length

Hi all,
I've been using GB for two years now. I upgraded to GB '08 the day it came out and put out two podcasts with no problems with it so far. Today, I'm editing the third podcast I created with GB '08 and I get a 40k file with a length of 0:00 if I export it in AAC. If I export it in MP3, nothing happens when the export is done - it doesn't even show up on the hard drive! This happened on TWO different Macs, one has NO third-party apps installed (it's new). So something has to be wrong with GB. Has anyone seen and solved this problem?

I don't have a solution, but when I get home tonight I'm going to HAVE to install Mac OS X on an external hard drive and put GB3 on there and re-edit the show. I have no other solution to the problem right now.
I suggest that EVERYONE that has this problem should post a bug report with Apple at http://bugreport.apple.com
Things I tried:
If I do an AAC export, I get the mixdown, but not the conversion.
If I do an MP3 export, I get the mixdown, and the conversion which lasts like 3 seconds (it should take a minute), but the file is junk.
Does anyone know WHERE the mixdown file is? I can't find it. At the very least I'd like the mixed AIFF file (if it exists).
I have not yet tried a shorter length. I only want to try that because previous podcasts worked and were shorter.
I have not yet tried deleting one or more of the tracks.

Similar Messages

Hello i need a help about script to export translatable text strings from ai files and import them back

Hello i need a help about script to export translatable text strings from ai files and import them back after editing, thanks in advance

Lanny -
Thank you for taking the time to help with this problem. Can I just say however that as someone who has posted a first comment here and quite clearly never used a forum like this before, your comment unfortunately comes across as very excluding. It makes me feel there are a set of unwritten rules that I should know, and that I don't know them shows that the forum is not for me. In short, it's exactly the kind of response that stops people like me using forums like this.
I'm sure it's not intended to be received like this and I am sure that the way you have responded is quite normal in the rules of a forum like this. However, it is not normal for those of us who aren't familiar with forums and who only encounter them when they have a genuine problem. This is why I hope it is helpful to respond in full.
The reason I posted here is as follows. I was directed here by the apple support website. The original comment seemed to be the only one I could find which referred to my issue. As there is no obvious guidance on how to post on a forum like this it seemed perfectly reasonable to try and join in a conversation which might solve more than one problem at once.
Bee's reply however is both helpful and warm. This could in fact be a template for how new members should be welcomed and inducted into the rules of the forum in a friendly and inclusive way. Thank you very much indeed Bee!

Sql Developer 3.1 - Exporting a result set in xls generates and empty file

Ever since upgrading to the Production version SQL Developer 3.1 (3.1.07) it appears that there is an issue when attempting to export a result set as a .xls format.
If I attempt to export in .xls format, the exported file is an empty file (i,e no output). When I change the export type to txt, csv or xlsx the results are exported as expected.
This appears to be a bug introduced in the Production version as I was successfully able to perform these tasks on the various 3.1 EA releases.
Am I alone in this, have I misconfigured something or is this a bug?

I keep having problems exporting to XLSX - mostly in cases where the data is voluminous and the format would be preferable over plain XLS as it does not have the 65krows limit ;-{ The data is read to the data grid (sometimes fast, sometimes much slower and "in chunks"), then the "task progress" won't move anymore, and the export file remains empty; If I cancel the task, trying to export again results in a message stating that sqldeveloper still has the output file locked.

Exporting query results into a csv file using arabic and hebrew chars

Hi,
iv'e encountered a problem, using plsql to export a query into a csv file.. the arabic turns into question mark. Do you have any idea why?

Usually this indicates a mismatch between client and database character set.
How do you export this query?
What is your database version?
What is your client OS?
T.

Exporting query result set into CSV file using Forms

Hi ,
My requirement is
-> I need to create a form where I have a Multi line text box and two button.
-> When I enter a query in text box and click on Execute button, It should execute a select query.
-> After execution, Result set needs to be exported into an Excel file.
Please give a hint how to do this????
Thanks,
maddy

as you are using text item to write SQL query by the user
so for that you need to use the exec_sql package to parse the text items query and get definitions and values of the columns being
resulted in the result set of the query.
once your query is execute to the desired connection then you need to use fetch the result to the CSV file by use of the TEXT_io package
which will open the text file with .csv extension and you have to pass the each line to that text file with comma separated values as "ss","rr" etc.
or you can use the ole2 package to call the excel application and then fetch the data of exe_sql query to that.

Export query results to a CSV file

Hi,
My requirement is I need to export the results of a query to a CSV file. Can anyone please suggest a way to include the column names also in the CSV file?
Thanks in advance.
Annie

Following code is from asktom. I have modified to include column heading. This will get your desired CSV file for a given query.
create or replace function dump_csv( p_query     in varchar2,
                                      p_separator in varchar2
                                                    default ',',
                                      p_dir       in varchar2 ,
                                      p_filename in varchar2 )
return number
AUTHID CURRENT_USER
is
    l_output        utl_file.file_type;
    l_theCursor     integer default dbms_sql.open_cursor;
    l_columnValue   varchar2(2000);
    l_status        integer;
    l_colCnt        number default 0;
    l_separator     varchar2(10) default '';
    l_cnt           number default 0;
     l_colDesc          dbms_sql.DESC_TAB;
begin
    l_output := utl_file.fopen( p_dir, p_filename, 'w' );
    dbms_sql.parse( l_theCursor, p_query, dbms_sql.native );
    for i in 1 .. 255 loop
        begin
            dbms_sql.define_column( l_theCursor, i,
                                    l_columnValue, 2000 );
            l_colCnt := i;
        exception
            when others then
                if ( sqlcode = -1007 ) then exit;
                else
                    raise;
                end if;
        end;
    end loop;
    dbms_sql.define_column( l_theCursor, 1, l_columnValue, 2000 );
    l_status := dbms_sql.execute(l_theCursor);
     dbms_sql.describe_columns(l_theCursor,l_colCnt, l_colDesc);
     l_separator := '';
     for lColCnt in 1..l_colCnt
     loop
            utl_file.put( l_output, l_separator || '"' || Upper(l_colDesc(lColCnt).col_name) || '"');
               l_separator := p_separator;
     end loop;
     utl_file.new_line( l_output );
    loop
        exit when ( dbms_sql.fetch_rows(l_theCursor) <= 0 );
        l_separator := '';
        for i in 1 .. l_colCnt loop
            dbms_sql.column_value( l_theCursor, i,
                                   l_columnValue );
            utl_file.put( l_output, l_separator || '"' ||
                                    l_columnValue || '"');
            l_separator := p_separator;
        end loop;
        utl_file.new_line( l_output );
        l_cnt := l_cnt+1;
    end loop;
    dbms_sql.close_cursor(l_theCursor);
    utl_file.fclose( l_output );
    return l_cnt;
end dump_csv;The original link is below.
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:95212348059
Thanks,
Karthick.

How to call a SP with dynamic columns and output results into a .csv file via SSIS

hi Folks, I have a challenging question here. I've created a SP called dbo.ResultsWithDynamicColumns and take one parameter of CONVERT(DATE,GETDATE()), the uniqueness of this SP is that the result does not have fixed columns as it's based on sales from previous
days. For example, Previous day, customers have purchased 20 products but today , 30 products have been purchased.
Right now, on SSMS, I am able to execute this SP when supplying a parameter. What I want to achieve here is to automate this process and send the result as a .csv file and SFTP to a server.
SFTP part is kinda easy as I can call WinSCP with proper script to handle it. How to export the result of a dynamic SP to a .CSV file?
I've tried
EXEC xp_cmdshell ' BCP " EXEC xxxx.[dbo].[ResultsWithDynamicColumns ] @dateFrom = ''2014-01-21''" queryout "c:\path\xxxx.dat" -T -c'
SSMS gives the following error as Error = [Microsoft][SQL Server Native Client 10.0]BCP host-files must contain at least one column
any ideas?
thanks
Hui
--Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --

Hey Jakub, thanks and I did see the #temp table issue in our 2008R2. I finally figured it out in a different way... I manage to modify this dynamic SP to output results into
a physical table. This table will be dropped and recreated everytime when SP gets executed... After that, I used a SSIS pkg to output this table
to a file destination which is .csv.
The downside is that if this table structure ever gets changed, this SSIS pkg will fail or not fully reflecting the whole table. However, this won't happen often
and I can live with that at this moment.
Thanks
--Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --

How do I export to AVI. file and make the size smaller?

Looking to export a film as a AVI file and alter the size and quality.
Thanks!

Hi,
you can use QT or FCP>Export> QT movie conversion but I like using Compressor.
In Compressor settings tab there's a button with a plus icon on the top right corner. Click it and in the popdown menu choose Quicktime Export Components.
You've just created a new untitled setting. It sits at the bottom of the settings in the untitled folder.
Drag and drop it onto your movie file just imported in Compressor. Double click it and/or see it in the inspector window. Give it a name and in the encoder type choose AVI.
Now (still in in the inspector window) if you click Options button below you can change a number of settings. Remember, the higher the bit rate the better the video will look but greater wil be the size of the video.
Do some tests to find best settings.
An example to use just as reference:
a 3GB DVCPRO HD video becomes 400MB AVI at 1000kbyts
Hope that helps,
G.

Acrobat quits during saving and then the file and comments are lost

I'm working in acrobat pro x on a 300page pdf. I am commenting on pages throughout the pdf using stickies. I try to save the file. half way through the save process acrobat unexpectedly quits. when i reopen it says it has recovered the lost file - i click on it and am told that the file cannot be opened and it is lost. This happend yesterday also so about 4 hours work down the drain! is there any way around this? thanks for any suggestions. If I can't comment safely on the pdf then the wrole reviewing/commenting process becomes unusable...

As you have seen, documents with high page counts and large file sizes can become unstable. Adding several hundred comments to such a document further contributes to the problem. It's a great feature that everyone loves, but it's not omnipotent, as you have seen! To avoid this, I always recommend regular exporting of comments to an .fdf file, and always PRIOR to regular saves. That way, if your files does crash for some reason, the comments can easily be re-imported. It's also advisable to have a backup, pre-annotation version of your document, as a matter of course.
Other issues to be aware of are file size, CPU usage and, most importantly, available memory. These are usually the culprits in situations like the one you described, although they provide no advance warning. In fact, the warning is usually when the file becomes unstable and behaves exactly as you described. Although your machine may meet the minimum systems requirements to run Acrobat X, when you get into this type of workflow, there is much more at play than most users initially realize. I wish there was better information available to warn users in advance about these these situations, but I did address these issues extensively in my book, "The PDF Litigation Guide."
Hope that helps!
Jason Covey
PDF Litigation Solutions, LLC
www.pdflitigationguide.com

Macro for exporting data to a BPC Data File

Hi,
My requirement is if in an Input Schedule, I can write a macro on a button click that takes the data from the input schedule cell range and exports it to a Data file at the BPC Data File path. Please note, while exporting, the data is to be overwritten and not appended, i.e. every time I export the Data file should be replaced with new data.
Does anyone have sample code for writing such a macro ?
Environment: SAP BPC 7.5 NW
Cheers,
Nitin

Hi Vladim,
The requirement is to allow the user to enter Account Type and Rate Type property values for certain nodes in the Dimension.
Since these values are not coming from BW, we need to maintain in conversion files while uploading the master data.
However, we need to do away with the manual maintenance of the conversion files and find a way to update these properties directly.
One way I thought was to create an Input Schedule (IS), the user enters the account no and rate/account type and clicks a button. This button
1. Exports this data to a Data File, and then a
2. Data manager package is called to import the data file.
Point 2 is doable, but im trying to figure out the step 1.
Since we do not have an FTP location hence won't be able to utilise your method.
Cheers,
Nitin

About exporting query result to excel

Hi all,
I take the report result to an excel file and at this point I am being asked for my user name and password of BW login, repeatedly for many times, based on the amount of data it contains. Its quite irritating, as i need to fill that each time, it asks for that. So kindly suggest me, how to deal with this.
Regards,
Naveen.A

Hi Naveen,
Not sure that understood what you exactly meant. But will try to help. When you execute query in BEx you can save a workbook detaching it from a server. In this case all reporting information will be kept without further updating from a server. The client will just open the wb and see all information. Certainly, he will not be able to make drilldowns. But for this you save your wb as a view with all drildowns already done.
Best regards,
Eugene

Restoring All Playlist Files and Smart Playlist Files

I have to reformat my computer. I've saved my iTunes folder to my external hard drive, but what I'm concerned about is all the Smart Playlists and Playlists that I've created. On my other laptop I hooked up my external hard drive and copied the iTunes files, but when I open iTunes, there are no playlists there. I have about 50 smart playlists that I've created. Do I have to recreate all of them after reformating my computer? Is there a file that can be copied that has all that information?

+Is there a file that can be copied that has all that information?+
Yes, it's default name is iTunes Library.itl
Alternatively, you can export each playlist to an XML file and then import it after your PC gets set up again.
Don't forget to deauthrozie itunes before you reformat!

Using Powershell Script Run simple query in MS Access 2007 and export the results of query to Excel

Hi Experts,
I have a Access 2007 DB file and 2 Big tables inside that (bigger than the size that can be easily handled by MS Excel 2007).
My requirement is automate using powershell scripts the below things.
1. Create a SQL query in Access DB and save that in access DB
2. Run the saved query and export the result in excel sheet where I can create the charts and Pivots. Thanks in advance
Prajesh

Do you have to use the Access query, couldn't you just recreate the query in Powershell? Here's a link with good info that references an existing script for querying an Access database:
http://blogs.technet.com/b/heyscriptingguy/archive/2009/08/13/hey-scripting-guy-can-i-query-a-microsoft-access-database-with-a-windows-powershell-script.aspx
Once you have your dataset you can pipe it to
Export-Csv -NoType c:\pathtofile\output.csv

Export table to flat file and need to insert sysdate in flat file column

Hi, I created an interface to export oracle table to a csv file. All of the table columns are working well. Then I need to insert the sysdate in csv file column.
I made the mapping as working in staging area, implementation is to_char(sysdate,'dd/mm/yyyy'). But the result is insert 14 to the column.
I have tried to create a variable refreshing as select to_char(sysdate,'dd/mm/yyyy') from dual, then mapping that to the column in csv file, but it only insert to 1 row and the format is yyyymmdd.
I have tried to use SELECT '<%=odiRef.getSysDate( "yyyyMMdd")%>' from dual for the variable, and it also only insert one row to the flat file.
I used the same methodology in ODI10g, it works fine.
So, I am wondering how it can be implemented in 11g.
Thanks

The first option you have stated seems like the obvious choice - I don't see any reason why this shouldn't work. What do you mean by "But the result is insert 14 to the column." Do you mean that it inserted the string "14" (I can't imagine why this would be the case) or that it inserted 14 rows?

Scheduling a webi report and export the result in PDF on local disk

I'm working with the new SDK to schedule a report and export its result on my local c:\ hard disk drive. My code give no errors at run but I do not find the file on my root.
The Instance counter of the report increase each time, so there is a refresh.
Is something wrong in the following lines? I just follow the examples give in the documentation for scheduling.
Thanks in advance !
Here is my code :
               Destinations oDestinations = Destinations.Factory.newInstance();
               Destination[] oDestination = new Destination[1];
               oDestination[0] = Destination.Factory.newInstance();
               oDestination[0].setName("CrystalEnterprise.DiskUnmanaged");
               DiskUnmanagedScheduleOptions diskOptions = DiskUnmanagedScheduleOptions.Factory.newInstance();
               String[] destinationFile = new String[1];
               destinationFile[0] = "c:\\" + report_name + ".pdf";
               DestinationFiles destinationFiles = DestinationFiles.Factory.newInstance();
               destinationFiles.setDestinationFileArray(destinationFile);
               diskOptions.setDestinationFiles(destinationFiles);
               oDestination[0].setDestinationScheduleOptions(diskOptions);
               oDestinations.setDestinationArray(oDestination);
               System.out.println("Getting report...");
               ResponseHolder respons = this.platform.get("path://InfoObjects/<path to report>/" + report_name, null);
               InfoObjects reports = respons.getInfoObjects();
               if (reports == null)
                    return;
               Webi myReport = (Webi)reports.getInfoObjectArray()[0];
               System.out.println("Getting scheduling info...");
               SchedulingInfo schedulingInfo = myReport.getSchedulingInfo();
               boolean newSchedulingInfo = false;
               if (schedulingInfo == null)
                    schedulingInfo = SchedulingInfo.Factory.newInstance();
                    newSchedulingInfo = true;
               System.out.println("Setting scheduling info...");
               schedulingInfo.setRightNow(Boolean.TRUE);
               schedulingInfo.setScheduleType(ScheduleTypeEnum.ONCE);
               schedulingInfo.setDestinations(oDestinations);
               WebiProcessingInfo webiProcessingInfo = myReport.getWebiProcessingInfo();
               if(webiProcessingInfo == null) {
                    webiProcessingInfo = WebiProcessingInfo.Factory.newInstance();
               WebiFormatOptions webiReportFormatOptions = webiProcessingInfo.getWebiFormatOptions();
               if(webiReportFormatOptions == null)
                    webiReportFormatOptions = WebiFormatOptions.Factory.newInstance();
               System.out.println("Setting Format...");
               webiReportFormatOptions.setFormat(WebiFormatEnum.PDF);
               webiProcessingInfo.setWebiFormatOptions(webiReportFormatOptions);
               myReport.setWebiProcessingInfo(webiProcessingInfo);
               if (newSchedulingInfo)
                    myReport.setSchedulingInfo(schedulingInfo);
               System.out.println("Schedule...");
               this.platform.schedule(reports);
               System.out.println("Schedule done...");

Hi Jerome,
I have gon ethrough your code again and there we are missing the destination plugin.
We have to query the info store to get the disk unmanaged plugin.
Below is the code
IDestinationPlugin destPlugin = null; //Destination plugin returned by InfoStore Query
        IDiskUnmanagedOptions diskUnmanagedOptions = null; //Object returned by the getSchedulingOptions() method
        List listDestination = null; //List object to hold destination file location
        IDestination destination = null; //Destination Interface
        //retrieve the Scheduling Options and cast it as IDiskUnmanagedOptions
        //This interface is the one which allows us to add the file location
        //for the scheduling
          for(int i = 0; i< oInfoObjects.getResultSize();i++)
           oInfoObject = (IInfoObject) oInfoObjects.get(i);
           destPlugin = (IDestinationPlugin)iStore.query( "SELECT * from CI_SYSTEMOBJECTS WHERE SI_PARENTID=29 and SI_NAME='CrystalEnterprise.DiskUnmanaged'").get(0);
          diskUnmanagedOptions = (IDiskUnmanagedOptions) destPlugin.getScheduleOptions();
        listDestination = diskUnmanagedOptions.getDestinationFiles();
          String dest = "c:\\";
        listDestination.add (dest + oInfoObject.getTitle()+".pdf");
          schedInfo = oInfoObject.getSchedulingInfo();
        schedInfo.setRightNow(true);
        schedInfo.setType(CeScheduleType.ONCE);
        //retrieve the IDestination interface from the SchedulingInfo object
        //use the setFromPlugin() to apply the changes we made to the
        //IDestinationPlugin object returned from the IStore
        destination = schedInfo.getDestination();
        destination.setFromPlugin(destPlugin);
          iStore.schedule(oInfoObjects);
Regards,
Prithvi

Exporting podcast results in a 40k file and 0:00 length

Similar Messages

Maybe you are looking for