Exporting to PDF, the letter t is exported incorrectly
Hello.
I have an winforms app developed in .net 3.5. Reports are made in Crystal Reports 2008. I have a problem when exporting a report to PDF. The application have about 10 reports, and all but one works fine. The report looks correct when displayed in the CrystalReportViewer, but the exported PDF is not. Some characters are displayed incorrectly. The letter 't' is displayed as 'tt'. But if I select the text, it selectes the two t's at the same time, as if they where one character. If i select and copy the text and paste it into notepad, the text is correct.
Not all t's are displayed incorrectly. All t's using the font Cambria are correct, all t's in the font Calibri turns into "tt"
For example:
In CrystalReportViewer the following text is displayed "lit"
In the exported PDF the following text is displayed "litt". If I select the text and copy it to another document, i get "lit".
I've tested the app on 4 different machines.
1. A Windows Server 2003, the exported PDF is correct here
2. A Windows Server 2008 R2, the exported is not correct here.
3. My development-machine, also running Windows Server 2008 R2. The exported PDF is correct here.
4. Another machine running. Windows Server 2008 R2. The PDF was incorrect here. all t's here displayed as "ti", so "lit" became "liti". On this machine I installed the very latest runtime (fixpack 3.3).
I looked in the GAC, and all machines seems to have the correct runtime installed (version 12).
I compared a working report with the report that is exported incorrectly, they both use the same font. Calibri.
Does anyone know what is wrong?
Kind Regards Johan
Don't forget to use the search box at the top[ right corner of this web page. The term "Calibri net crystal" returns one hit:
[1547961 - The character 'i' is added after every lower case 't' when a report is exported to PDF file format|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533343337333933363331%7D.do]
Also make sure you are on SP3:
https://smpdl.sap-ag.de/~sapidp/012002523100007123572010E/cr2008_sp3.exe
MSI:
https://smpdl.sap-ag.de/~sapidp/012002523100007123592010E/cr2008sp3_redist.zip
MSM:
https://smpdl.sap-ag.de/~sapidp/012002523100007123582010E/cr2008sp3_mm.zip
- Ludek
Similar Messages
-
I have a special cmyk mix for a bcard in Indesign. When I export the pdf the cmyk mix has changed Just started today 1.13.15 Running Yosemite 10.10.1 Any help on what to look for would be greatly appreciated.
Thank you Peter. Someone else must have been on my computer because I do not change the settings. You pointed me in the right direction.
Thanks again.
Patrick -
When I export my file to generate a .pdf, the text box literally has a box around it! How do I make that line disappear?
Sounds like you have a stroke on it. Select the frame and set the stroke to none.
-
I created a photo book in Photoshop elements 11 that contains png files with the invisible backgrounds. When I export the book to a jpg or a pdf, the png files appear with white backgrounds. Any suggestions on how to fix this?
jpg and pdf formats don't support transparency. You need to use a format such as tif, png or psd that does.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks. -
When exporting to PDF, the pictures are not the same size I "placed" them
I am "placing" pics that are 653 x 983 pixels, 300 DPI, using CS4. However, my issue is when exporting to PDF, the PDF doesn't look like the same size I "placed" the pic until I blow it up to about 350%. I do not have a printer set up to my computer so I can't do the print/pdf option. Am I doing something wrong here? I can't figure it out. Your help is appreciated. Thanks!
Well, right when I open the PDF, it's just way too small, imagine it being the size of a business card. I have to keep zooming in until it gets to the size I originally intended it to be. When I create a new document am I suppose to make it the same size as the picture?
-
When i export to PDF, the file won't open automatically
When i export to PDF, the file won't open automatically, i have to open the folder and look for the created file... Acrobat 9.1, sap 2007...any suggestion?
Hi........
Go to Administration--> System Initialization --> General Setting --> Path Tab.....
Check whether this below path has been defined if not then define it if yes then redefine.......
C:\Program Files\SAP\SAP Business One\Attachments\
Hope this will help you....
Regards,
Rahul -
When using Exprt PDF, the choice of language for the document to be exported is sometimes very restricted, while sometimes many more languages are available. What's the matter?
Dear Mrs.,
I now add 2 print screens which show what I get when I try to export a PDF from Adobe Reader and which languages are available.
The same problem does not exist when I use the website.
I hope this gives you a clue.
Many thanks,
Jos MERTENS,
Advocaat. -
How do I preserve the embedded hyperlinks when printing to .pdf?
I am using Acrobat Pro XI for Mac, and when I export to .pdf the existing hyperlinks lose functionality. I assume it’s just the flick of the right button – I just need help finding that button.
Can you help? Thanks!How: MS Word to .pdf by Command P, hitting the PDF button, and then the button for "save as Adobe pdf"
I didn't have this problem at all on prior versions of Adobe on my PC. This isn't a Mac attack, is it? -
I just paid almost $10 to create a pdf from a jpg file, but I did it so that I could edit it. Now I find out I needed a different Adobe package that would create the pdf AND let me edit it. What do I do now?
Hi Marion,
PDF pack is meant to convert files to pdf format, Here's the feature list : Convert Word to PDF, Convert PDF to Word & Merge PDFs | Adobe PDF Pack
In order to Create, Convert, edit pdf files, one needs to purchase Acrobat Software, Here's a feature list of Acrobat Pro : Features, PDF documents | Acrobat XI Pro
However, you can download a free 30 day trial of Acrobat software using the following link : https://helpx.adobe.com/acrobat/kb/acrobat-downloads.html
Regards,
Rahul -
I installed the latest version of ibooks on my ipad. I have about 50 different collections of scanned pdf's. I can only view up to the letter M. Any idea where the rest went? These are client files. Help!!!
I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6. -
Sometimes when I view vector art on the screen the letter I shows up
extra wide and big, but the printed version works fine. Example below. This only happens some of the time to me, but not always with the same piece of artwork. I think this must be a common problem; does anyone know a solution?
Thanks,
JeffThe text is outlines. I don't have access to the original typeface. It only seems to happen when I export; on the illustrator screen everything looks fine but in the exported pdf it has this severe problem. I noticed it also affects lower case L's in the pdf of the university's wordmark standards guide (at least when viewed on my system), which contains various examples of the logo. http://www.uic.edu/depts/paff/identity/PDF/standards.pdf
I understand what you mean about alignment to whole pixels. But certainly many things are not aligned to the next whole pixel, but doesn't it usually it get anti-aliased rather than filled in 100% of the next pixel?
Thanks,
-Jeff -
How can i attach a photo in the library to an email instead of imbedding it in the letter
I would like to take a picture from my library and send it as an attachment in a email. The only way it seems to be able to be sent is by embedding it in the letter.
Kirby has already summed it up nicely. If you really want to ensure, that the recipient will see the the image as an attachment and not as an embedded image, compress the file before you send it. Export the image version in the right size to your Desktop, then right-click (or ctrl-click) and use "fCompress ...." from the contextual menu. Drag the compressed file to the Mail icon in the Dock.
Just in case, you are sending your images to Windows users and have not come across this setting, you may want to check the Mail option in the "Edit" menu: "Always send Windows-friendly attachments". -
Every time I try to save my Indesign document as an Interactive PDF, the option of either saving it as Interactive PDF or PDF is not showing.
You export to PDF, not save.
-
The letter "G" shows up in the start when I log in to my HTPC via SSH
When I log in to my HTPC via SSH the letter "G" shows up in the beginning:
[ Neytiri ~ ]> ssh hund@<IP> -p <port>
Last login: Fri May 14 08:54:06 2010 from [...]
G[hund@Fjuppen ~]$
I dont have this problem when I log in to my server via SSH. I'm using zsh on my workstation and bash on my HTPC and server. If I use bash on my workstation and log in to my HTPC the problem doesnt occur.
It doesnt causes any problems, but it's disturbing that it's there and that I cant solve it myself.I am not sure what the problem is, but I might know where you can start searching for it.
I have had a similar problem but it was when I tried to convert the official init scripts to C. I got a G at the beginning and It didn't seem like the utf8 support worked for the console (å,ä, and ö didn't work). The problem that I had was that I couldn't get /etc/profile.d/locale.sh to execute correctly from within the C program, it might be that zsh doesn't execute the locale.sh script correctly. I don't have a solution for the problem since I am still trying to solve it myself.
Anyway. the script is partly generated from line 372 in rc.sysint (pkg: initscripts 2010.05-3):
echo 'if [ "$CONSOLE" = "" -a "$TERM" = "linux" -a -t 1 ]; then printf "\033%%G"; fi' >>/etc/profile.d/locale.sh
The generated /etc/profile.d/locale.sh looks something like this (it may of course look different but that depends on the utf8 and locale settings in your rc.conf):
export LANG=sv_SE.utf8
if [ "$CONSOLE" = "" -a "$TERM" = "linux" -a -t 1 ]; then printf "\033%%G"; fi -
Does anyone know why when printing from light room to pdf the program just closes on me? I've talked to tech support and they are going to get back to me tomorrow but I am desperate I have tuns of homework to finish !!
No, but if you really mean that the way you said it, I don't know that Print is the best way to this. If you haven't already, after selecting the images you want to get printed, try clicking the Export button in Book or Library module and then selecting format .PDF. Once you export the file to .PDF, try opening it where you saved it and printing from there, not in Lightroom but in Adobe Reader. If that doesn't help, here are a couple of videos that might--follow their instructions carefully with no shortcuts:
Adobe Photoshop Lightroom 4's Export to PDF Using the New Book Module - YouTube
Lightroom 5 - Exporting Images | Getting Started with Adobe Photoshop Lightroom 5 | Adobe TV
If Lightroom keeps closing even when you try all this, you may need to reinstall Lightroom because your copy may be screwed up.
Maybe you are looking for
-
Screen says problem with printhead
The printer screen says problem with printhead. I tried the trouble shooting directions, and it did not work. several colors may be almost out of ink...is that an issue? i need my printer!! Help!
-
Please help: how to connect to SQL Server Analysis Service (OLAP cube) with Crystal Re[ort XI
I'm trying to connect to an OLAP cube on our SQL Server 2005 machine which is running Analysis Services (9.0). When I am trying to use the Crystal Reports menu follow steps mentioned below: 1) New report -> Standard Report Wizard 2) Create New Conne
-
Need seperate plugins to enable 3G/LTE in next update
facing lot of problems due to this. i. an area with weak 3g signal we r unable to use edge signal.
-
Manage Laboratoy consumables stock in QE51N or QA11.
When performing each analysis (within an Inspection Lot) should see the list of items and quantities consumed (with the ability to add or remove materials) and deduct the same stock at the time of recording the results (or taking Usage Decision). Ple
-
Long term, interactive planning
Hi, I have having problem in long term planning In MS annual planning, i can see that till 2008 planned order has been created.Ater firming and run MD43, i can see only few months not all month for next year.After i save this and go to MD15 i cant s