Express Document Update was Terminated in VA01 Transaction

Hi to All,
I am facing problem when Sales Order is creating in VA01 Trasaction when document get created but after going to Va02 it is throwing error 'Update Terminated' I studied the Dump analysis and Update Analysis in ST22 and SM13 it is due to GETWA_NOT_ADSSIGNED. I cant understand what may be the problem. Can any one help me, Its urgent
Please help

> > check short dump in ST22 it will show more info on
> > which variable/table is causing this error.
> > one of the posisble reasons - WRONG vlaue in UPDKZ
> > field.
> > to check - set breakpoint to
> > USEREXIT_SAVE_DOCUMENT_PREPARE and at the end of
> this
> > userexit check the value of UPDKZ field in XVBAP,
> > XVBEP,... tables.
> > It should NOT have 'U' in VA01
>
> Thanks,
> Yes what u told is correct, after the
> userexit_save_document_prepare the updkz is becoming
> 'U' n how can we overcome this, i have to harcoded
> with 'I' when that is 'U'.
When i change XVBAP-updkz with 'I' then its not getting error but another error is coming of update termination. Error is 'sapsql_insert_duprec' but i check there are not Duplicate sales order and i also check the number intervals they are fine. Whay may the problem????
Can any one help. plzzzzzzzz.

Similar Messages

Getting Express document 'Update was Terminated' in Call Transaction AS02

Hi All,
I've written BDC for changing the Asset Master using Call Transaction Method. After the Call Transaction it it showing me the Success message that 'The Asset has been Changed'.But it is not reflecting in the Database table.When i navigate back from th e screen I'm getting the Express document as 'Update was terminated'.
Please help me in this regard.
Thanks and Regards.

Hi,
have you used commit statement after the call transaction statement, or if there is any enhancement for AS02 transaction remove the commit work statement from the enhancement.
Regards, Qamar

Express Document "Update was terminated" in FM: BUPA_ADDRESS_CHANGE

Hi all,
As per our requirement we needed to add different types of phone nos to an Business Partners Address. We are using the Function Module BUPA_ADDRESS_CHANGE to insert the Telephone nos by passing values to the internal table for ADR2 table in the FM. The function module updates the phone nos successfully twice. The Function module fails the third and subsequent times within the same session. The code used for the same is as below:
CALL FUNCTION 'BUPA_ADDRESS_CHANGE'
   EXPORTING
     iv_partner          = l_bpnumber          "BP no.
     iv_addrnumber   = l_addrnumber       "BPs address no
     iv_addrguid        = l_addrguid           " Address guid
     is_address        = t_addrdetails        "Address details
TABLES
     it_adtel             = t_teldetails           "Telehphone nos to be inserted with the sequence nos from 001(Home telephone no), 002(Work Phone No.) & 003(Mobile no)
     it_adfax            = t_faxdetails          "One Fax No and its extension with the sequence no set to 001
     it_adsmtp         = t_emaildetails       "Email Details with sequence no set to 001
     it_comrem        = t_telremarks         "Adding a remark to a particular phone no as WORK PHONE No.
     it_adtel_x         = t_teldetailsx         "Setting the updateflag to I for insertion of telephone nos.
     it_adfax_x        = t_faxdetailsx        "Setting the updateflag to I for insertion of fax nos.
     it_adsmt_x       = t_emaildetailsx    "Setting the updateflag to I for insertion of email.
     it_comre_x       = t_telremarksx      "Setting the updateflag to I for insertion of remarks nos.
     et_return          = t_returntab.          "Returns tab for error message
The FM Inserts the Telephone nos successfully twice but fails the third time within the same cic0 session, with the error message as below:
"Express Document "Update was terminated" received from author Kumaran Vurunathan".
Displaying the Document we get the following detail:
Update was terminated
System ID....   DD0
Client.......   040
Transaction..   CIC0
Update key...   42A303E8F2B23E97E1000000947F220A
Generated....   13.06.2005, 04:43:28
Completed....   13.06.2005, 04:43:28
Error info...   CD 328: DUPREC:POS&BUPA_ADR&0000105277
Again, if everytime new Business Partner is used to add telephone nos within the same cic0 session, the program works fine.
The problem occurs only on the same BP being used for the third time within the same session. We are thinking that this might be a Locking problem and thats why the Update is getting terminated.
If anyone had encountered the same issue while using this FM, please advise the reason for the same and how this could be rectified.
Thanks & Regards,
Babu Changalvala,
AOL: babuchangalva.

Hi,
To be clear, my understanding is that you are updating the same partner multiple times with this function.
Try 'commit work' after each call of the FM, if that is not an issue for your current logic.
Another option you can try is calling it with destination option. This is just a guess. Try it like 'Call .... destination NONE importing.....'
cheers,

Express document "Update was terminated" received from author in J2IUN.

Hi,
Pl. help
At the time excise utlization this message is come
Express document "Update was terminated" received from author
Suresh Yadav

hi
"For your update terminate problem please proceed accordingly
goto SM13, there you can see the updates terminated & their logs.
Click on one of the Updates terminated with transaction.
Double click on the line , you will see alist of Function modules, click on the function module in red, here click on the log to see more details on the reason for update termination.
in the dump anlysis you can see the reason for dump.
Act as per the dump anlaysis. usuall reasons for the dump is any new changes to the program or number range error ."
Please take help of ABAPEr for Dump analysis , if it is sytem issue take hlep of BASIS
Thanks & Regards
Kishore

Express document "Update was terminated" received from author "    "in VA21

Dear SAP Experts,
i just set up Output determination for quotation type. and created VA21, while coming out i am getting error
as Express document "Update was terminated" received from author "
below is the dump i am getting. Could you please help me to solve this?.
Update was terminated
Created       m8050032 on   06.01.2010   13:04:43
Update was terminated
System ID....   E6I
Client.......   800
User.....   M8050032
Transaction..   VA21
Update key...   DD95FADEFC90F19591EF001D0915C7EC
Generated....   06.01.2010, 13:04:42
Completed....   06.01.2010, 13:04:43
Error Info...   00 671: ABAP/4 processor: SYNTAX_ERROR

Hi,
Goto T.code ST22 - ABAP runtime error
click today button,
check for the error and double click to get the detailed long text
see "How to correct the error"
take a help of ABAPer
Regards
senya

Express document "Update was terminated" received from author in MM01

Hi gurus,
When we are trying to create the MM by using the t-code MM01 we are getting the error message as Express document "Update was terminated" received from author "XXXX". Based on this error we have verified the t-code SM13 and received the below details and there is no dumb in ST22.
Update was terminated
Created       SOLIYAPPAN SADASIVAM on   23.11.2011 ; 05:07:18
Update was terminated
System ID....   MD1
Client.......   500
User.....   SSADASIVAM
Transaction..   MM01
Update key...   4ECC6061B2567110E10080000A795665
Generated....   23.11.2011, 05:07:18
Completed....   23.11.2011, 05:07:18
Error Info...   Error inserting in table MBEW
Please suggest me how to fix this issue.
Thanks
Sada

Hi Jürgen,
When we verified SM13 the error is occuring as below when we double click the SM13 error.
1    MATERIAL_UPDATE_DB        V1 (no retry)     Error
Please suggest me how to proceed further.
Thanks
Sada

PM workorder printing problem -- *"Express document "Update was terminated"

Hi All,
I have designed a PM workorder smartform.
This form is getting triggered from the standard transaction IW32. There is a Z driver program and Z smartform.
However when I am directly trying to print the this smartform(Order> Print>order) using the shoppaper number customized for my Zdriver program and zsmartform, the workorder gets saved but then on again entering into the workorder its gives the message :-
"Express document "Update was terminated" received from author "XXX".
And hence I am not able to print the smartform.
However when I see its print preview and then try to print the smartform its allowing me to do so.
Can anyone provide me the solution for the same.
Thanks in advance for your help.

Hi,
the exception in fm CO_BH_ORD_HEADER_PRE_READ appears in two places:
1.-
IF import_message_id IS INITIAL.
ELSE.
    IMPORT order_tab FROM MEMORY ID import_message_id.
ENDIF.
* Aussteigen falls überhaupt kein Auftrag/Netzplan gefunden wird
IF NOT sy-subrc IS INITIAL.
    RAISE not_found.
ENDIF.
2.-
IF no_afpo IS INITIAL.
ELSE.
    IMPORT pos_tab FROM MEMORY ID import_message_id.
ENDIF.
* Aussteigen falls überhaupt kein Auftrag/Netzplan gefunden wird
IF NOT sy-subrc    IS INITIAL AND
         counter_tot = 1       AND
         no_afpo     IS INITIAL.
    RAISE not_found.
ENDIF.
Put a break point and execute to see what is going on.
Best regards.

FMBBC Express document " Update was terminated error"

Hi ,
while saving data FMBBC i am getting saved message , after that if i come out of the Tcode i am getting message as
Express document " update was terminated".I was debugging the standard code found that the error comes from SXOP table entry, This table is get filled from FM SO_EXPRESS_FLAG_SET. But this FM is called from background I think. There is no job also created.After displaying the message automatically the SXOP table entry is get deleted. I want to debug this FM or wht is the reason for displaying message.
Regards,
siva kumar

Following steps may help you.
1. GO to SM13 transaction.
2. Check your update request.
3. You can see exact point in the standard program where you are getting this message

Express document update was terminated in mm02

Dear experts:
                    when i use MM02 to change the material master,after saving,i get the error message'Express document update was terminated'.
                    The ID has working period of time and the authority is enough to do this,pls give some advice.
                    Thank you very much!

Hi Stephen,
This error message comes when ur transaction doesn't get the proper system resources or when the load on the server is too much. Becuase of which tables dont get update and u get the error .
basically it is performance issue of the system. U can try after some time if proble persists u can contact ur BASIS team.
Regards,
AM

Express document 'Update was terminated' in vf02

Hi Gurus,
I am getting Express document 'Update was terminated' error while triggerring customized
output type in vf02.
i found dump in st22 and describes as below.
Error analysis :
This program is triggered in the update task. There, the
following ABAP/4 statements are not allowed:
- CALL SCREEN
- CALL DIALOG
- CALL TRANSACTION
- SUBMIT
Pls kindly suggest me what could be the reason

Hi Sheshikanth,
you have an exit in the update section of the transaction VF02 calling one of those statements (CALL...). This is prohibited.
Go to SM13 and follow the error. You will find the code that is causing your problem.
regards,
Edgar

Express document "Update was terminated" in CS62 order BOM change

Hi All,
I am creating one sales order BOM with reference to Material BOM. While creating BOM, we have setup BOM creation in such a way that while creation BOM status will be inactive.
While changing status to active using CS62 transaction, I am getting error Express document "Update was terminated" from author. And after BOM created in CS61 is getting deleted automatically.
Regards,
Sachin

Hi,
There could be a database related problem. Contact your Basis Pople.
Regards,
Siva

In update task & Express document Update was terminated

Hi all
Need help!
Requirement: When i do confirmation through CO11N i have to do GI through a BADI.
Solution: I have written a wrapper Update module(internally has /AFS/BAPI_GOODSMVT_CREATE) with Start delayed and called that module(in update task) in the method MB_DOCUMENT_BEFORE_UPDATE of the definition MB_DOCUMENT_BADI.
It works fine when every thing is correct, but if GI fails its still confirms the confimation and "Express document Update was terminated" pops up when i push the back button. I have written a abort statement in the update module if goods movement fails. When i check SM13 it shows the reason for erroring out. But my requirement is to stop the complete transaction if GI fails and put the error message at the bottom of screen(CO11N)
How can i do this?
Appreciate any suggestions.

Hi,
I don't think that it is possible. It's too late to call rollback. The FM in update task is called after command COMMIT WORK. Here is a quote from ABAP documentation:
If during the update an error occurs, the update work process executes a database rollback, returns the log record with a note into table VBLOG and informs the user whose program has created the log record by SAPMail. After removing the error cause, the returned log records can be updated again.
So you should call that module only in case that you are 100% sure that it will be processed correctly.
Cheers

Error:express document "Update was terminated" received from author

Hi All,
I m creating shipment frm the transaction VL01.
While creating the shimpment i am assigning one Z output type and clicking on the planning phase on the shipment.
After that i am saving my shipment.
At this point of time my shimpmnet is created but after this(after saving the shimpment) if i am trying to do anything it is giving me the below error.
Express document "Update was terminated" received from author "Sachin Yadav".
Kindly help why i m gettng this error. How to remove this error.
Regards
Sachin

SAP is telling you that the transaction failed and a rollback has been executed, due to some catastrophic error in the system. These often arise from errors in exit coding....check ST22 to see if you can find anything...there may be a clue there....otherwise start looking at the changes you just made for the source of the error.
This error occurs, most likely, because during the actual save to database operation, or because of something in follow-on processing launched during the save step (like a new background task for form output or something like that) an fatal error is occurring and SAP is detecting that and rolling back the body of work that was just committed to the database.

Error Msg: Express Document 'Update was Terminated' in VF02 t-code

Hi all,
When I click on save in VF02 transaction I am getting message that ' Express Document 'Update was Terminated' received from author 'XYZ'.
After saving when I am seeing in header -output the output type not appearing.
Please Help me Its an urgent requirement.
Regards,
vinod

Hi Vinod,
there is two reasons
1) Number range is not specied limit define billing document number range.
path- img sd- billing -define number range and see diffenettly i hope your problam willbe solved.
2) t.code NACE whether you have maintained the condition record or not check other wise please maintain it.
i hope you have understood
if your problam is solved don't forget to reward.
thanks& regards
surya

In unicode system: Express document" update was terminated

Hi Friends,
When we create a PO / Delivery / Sales / Billing documents in UNICODE Systems
we are getting message
"Express document" update was terminated"
this is coming before we save the transaction. Could any body help on this .

Hi,
Express error due to many reasons,
1. If any Sap scripts/forms using then is that unicode compliant? check if any errors
2. Verify the SAP Notes for that service pack, as there might be some bugs in the system
3. Verify the problem might due to user exists or BADIs.
Regards,
Raveendra

Express Document Update was Terminated in VA01 Transaction

Similar Messages

Maybe you are looking for