Extended IDOC DEBMAS06 (MSG-Type DEBMAS) can't be filled using user EXIT

Hi,
I'm having a problem trying to fill an additional created segment (extension) for the IDOC DEBMAS06.
This IDOC is generatede from an ALE szenarion
and I need additional fields to fill using my extension.
With CMOD I created a new project using the enhancement VSV00001 (User exit  Customer and vendor distribution  Receipt/issue) to fill the additional field but, no way.
My extension segment will not appear onto this user exit.
I tried to search new exits, tried to make additional settind using ALE customizing but again now way, this onw extended segment will not come up in the user exit.
Please Help !
Many thanks
Gaspare

What do you mean by "My extension segment will not appear onto this user exit."? It will not be there, you will have to fill it and append it to the EDIDD table. In thh user exit, you will append the records for segment zzzzz(your extended segment) at the appropriate place.
Say the standard IDOC has the structure like below
A
--B
--C
D
and you added extended segment at the same level as B and C. In that case, you have to append the new segment records at the end.
If you added your segment as a child segment of B, then you will have to insert the records into the EDIDD table before the C segment.
Srinivas

Similar Messages

  • Geography based industry scenario which can be implemented using user exit

    Hi All,
    I am searching for a geography based industry scenario which can be implemented using user exit strategy.
    Please let me know me if anyone knows about any such scenario.
    Thanks & Regards,
    Pranjali.

    Hi Amith,
                   IDOC configured throgh CHANGE pointers.So no need to worry about IDOCS and all.My work was trigger idocs by user exits.Wen  ever i change venodr no.. idocs shoud be triger.
                 Now my question was Insted of going transaction( from there we can  go to debuging mode) i want to check this Exit by RBDMIDOC programe(ofter excute this programe and give Message type as CREMAS,from there i want to go debugging mode).
    Just now i checked,i put breakpoint in Include programe(INCLUDE ZXF05U01) and excute from XK01,it goes to debuging mode,so its fine.But i want triger from RBDMIDOC programe.Ofter excute RBDMIDOC programe,we can enter CREMAS.From there i want to go debuging mode.
    Pls help me,
    Thanks

  • How can i do a variable User exit that present the values before execute

    Hi Gurus,
    How can i do a variable User exit that present the values before execute, i need this:
    a variable that calculate SYS-DATUM until 30 days before (I got the code) but this  variable run automatic because is user exit, i want this variable but first present the values, not execute automatic, this is because the users want the report that automatic present the values , help

    Hi,
    Refer the below links,
    http://documentation.softwareag.com/natural/nat424mf/pdf/ops_mf/conf_usrex.pdf
    http://www.erpgenie.com/component/content/article/1097
    http://www.apentia-online.at/UP/Apentia/files/Article/SAP_BW_User_Exits_and_BAdIs.pdf
    Hope it helps you,
    Regards,
    Ravindra.

  • Can i use user exits

    Hi,
    Can anybody tell me if i can use user exits for not applying cost centre fields for Assets and liabilites gl a/c when we post transcations in fb60 0r fb50 f-22 etc
    warm regards
    Manjunath

    hi Manjunath,
    you can try to set up a substitution and see if it is working. On the other hand P/L accounts must have a CO object by posting, of course cost center is just one option.
    ec

  • Where can I find a useful "user guide" I can print for an ipad2

    Where can I find a useful "user guide" I can print for an ipad2

    Be green and don't print!  The iPad user's guide is in the bookmarks section of Safari.  But, because you'll be reading it in Safari, you have to be in a wifi area or using the 3G network.  However, you can download the .pdf and open it in the free iBooks reader.  Then you have it with you wherever you go and don't have to be on the internet to read it.

  • Can I use User Exit u2013 IWOC0004 u2013 Change Single-Level List for TCODE IW37N?

    Hi All,
    Can I use User Exit u2013 IWOC0004 u2013 Change Single-Level List for TCODE IW37N?
    In documentation of the User Exit I can see that I  can use this user Exit for IW37(Program - RIAFVC20) , but I want to use this for IW37N (RIH_ORDER_OPERATION_LIST).
    Please tell me is it possible.
    With best regards,
    Narendra

    Hi Pete Sir,
           I am on 4.7 , how to work with it. I am going to use screen exit IW0110018 and I want to add User fields in the IW37N.
    Thanks with best regards,
    Narendra

  • Creating delivery, can I check the sales order's field using user-exit or ?

    Hi dear.
    When I create a delivery in VL01N or other transactions, I want automatically to check the sales order's some field and to decide whether create or not.
    Can I use user-exit for that?
    Or other solutions is there?
    Thanks regards

    Yes your requirement can be achieved thru a User Exit.
    There are many User Exits available in Delivery as listed in the link below:
    https://wiki.sdn.sap.com/wiki/display/ERPLO/SDUserexits
    The selection of necessary User Exit is based on your specific requirement.
    Also if you want to check some feild of Sales Order whether it is completed or not, then you can also use Incompletion Procedure in Sales Order, which will make sure that no Sales Order is saved until the end-user enter data in those feilds.
    Hope this helps...
    Thanks,
    Jignesh Mehta

  • Can anyone knows SM04 related user exits.

    Dear All,
    Can anyone knows SM04 related user exits. Please let me know.
    Urgent.
    Regards,
    Karthik.

    Hi,
       There are no user exits related to SM04.
       U can write a small program to know if a Transaction code has any user
       exits as follows.
    REPORT YTCODE_FIND_USEREXIT .
    *& Report  ZTCODE1                                                     *
    tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
    tables : tstct.
    data : jtab like tadir occurs 0 with header line.
    data : field1(30).
    data : v_devclass like tadir-devclass.
    parameters : p_tcode like tstc-tcode obligatory.
    select single * from tstc where tcode eq p_tcode.
    if sy-subrc eq 0.
    select single * from tadir where pgmid = 'R3TR'
    and object = 'PROG'
    and obj_name = tstc-pgmna.
    move : tadir-devclass to v_devclass.
    if sy-subrc ne 0.
    select single * from trdir where name = tstc-pgmna.
    if trdir-subc eq 'F'.
    select single * from tfdir where pname = tstc-pgmna.
    select single * from enlfdir where funcname =
    tfdir-funcname.
    select single * from tadir where pgmid = 'R3TR'
    and object = 'FUGR'
    and obj_name eq enlfdir-area.
    move : tadir-devclass to v_devclass.
    endif.
    endif.
    select * from tadir into table jtab
    where pgmid = 'R3TR'
    and object = 'SMOD'
    and devclass = v_devclass.
    select single * from tstct where sprsl eq sy-langu and
    tcode eq p_tcode.
    format color col_positive intensified off.
    write:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    skip.
    if not jtab[] is initial.
    write:/(95) sy-uline.
    format color col_heading intensified on.
    write:/1 sy-vline,
    2 'Exit Name',
    21 sy-vline ,
    22 'Description',
    95 sy-vline.
    write:/(95) sy-uline.
    loop at jtab.
    select single * from modsapt
    where sprsl = sy-langu and
    name = jtab-obj_name.
    format color col_normal intensified off.
    write:/1 sy-vline,
    2 jtab-obj_name hotspot on,
    21 sy-vline ,
    22 modsapt-modtext,
    95 sy-vline.
    endloop.
    write:/(95) sy-uline.
    describe table jtab.
    skip.
    format color col_total intensified on.
    write:/ 'No of Exits:' , sy-tfill.
    else.
    format color col_negative intensified on.
    write:/(95) 'No User Exit exists'.
    endif.
    else.
    format color col_negative intensified on.
    write:/(95) 'Transaction Code Does Not Exist'.
    endif.
    Please award iff it's helpful.
    Regards,
    GSR.

  • Reg. IDoc errors in Mat Mas conversion using ALE/IDocs & reduced msg type

    Hi Friends,
    Am facing a strange situation while converting the Material Master data from 4.6b to ECC using BD10 transaction with reduced custom message type. I have reduced the standard msg type MATMAS03 using BD53 for the required field mapping both in 4.6b and ECC systems and I written the code using the exit EXIT_SAPLMV01_002 based on client req.
    The situation is that in receiving system(ECC) sometimes IDocs are failing and the error shows that some fields which I have not selected in E1MARAM segment of the reduced msg type are populated with some values(ex: zeroes-0, slash-/,spaces)
    (Error Msg -Blank spaces in change number     0   / are not supported). And all these coversions are scheduled as Batch jobs and by ALE setup. But when I try to send these errored out material numbers using BD10 tcode(without Batch job), they are posted successfully and the IDoc does not show the additonal fields which I have not selected. I tried to debug the errored parts conversion, but they always post successfully.
    FYI, the additonal fields which are populating does not exist in the message type MATMAS03 of the sending system(100 flds) but exists in receiving system ECC(118 flds).
    Please help me out..if you have any clue.. and pls let me know if you need more info about this scenario.
    Thanks

    Hi,
    Please check the documentation in WE60 tcode and see if the fields are required to be passed...
    Regards,
    Nagaraj

  • How i can use user-exit

    How i can use user-exit

    hi,
    in order to find out the user exits for any tcode,
    1. get the developement class of the tcode from SE93.
    2. Now goto transaction SMOD and press F4,
    3. give in the Deve class in the dev class and Press ENTER
    this will show u the exits for any tcode.
    or execute this report
    http://www.erpgenie.com/sap/abap/code/abap26.htm
    which gives the list of exits for a tcode
    http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec079f5db911d295ae0000e82de14a/frameset.htm
    For information on Exits, check these links
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sapgenie.com/abap/code/abap26.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    http://www.easymarketplace.de/userexit.php
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sappoint.com/abap/userexit.pdfUser-Exit
    Regards
    Anver

  • Hi all, How can i write logic in user exit?

    i have user exit exit_saplmgmu_001.How can i write in user exit? in which t-code.

    Hi Murali,
    I mean you are looking for the fields that has to be populated to the database table. So, go through this link you will have clear picture of MM01 Screen exit where you can populate the field in the database also.
    I think this is the link that exactly suits your requirement.
    Here all the details are given in detail with screen shots.
    Please go through this.
    http://www.****************/Tutorials/ExitsBADIs/MM/MM01.htm
    Reward points if it helps.
    Cheers,
    Swamy Kunche

  • Where can I find a useful user manual for the A1?

    I am so confused I don't know exactly where to begin. 
    I tried to download an EPUB format ebook from 2 different websites, and all i get is a worthless "download failed" message every time, with no explanation of the cause.
    The user manual included on the A1 has NO troubleshooting section, NO index, and apparently NO ability to search the manual.  Where can I go for more complete documentation, especially troubleshooting, although a tutorial would be nice, too.
    Thanks to anyone who can help me!!!
    Solved!
    Go to Solution.

    @bswords,
    Found this on our support site.
    See if it helps.
    http://download.lenovo.com/UserFiles/UserGuide/en/User%27s%20guides%20and%20manuals/A1-07/A1-07_EN_%...
    //JameZ
    Check out the Community Knowledge Base for hints and tips.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    X240 | 8GB RAM | 512GB Samsung SSD

  • When stiching two separate scans together, I can't bucket fill (use PS6.0)

    The platen or glass
    on my scanner isn't large enough to accomodate my 11inchX14inch
    map sketch I am attaching. So I scan in as much of it as possible, then crop i
    t accordingly and keep it set as PDF. I then turn over the original and scan the sam
    e way to get a lower bottom portion of this image and crop the area I need, copy it and pas
    te it in open area BELOW other half and match all the lines for the streets u
    sing the UP & DOWN arrows on my keyboard.
    Here is where my problem begins...I color the open areas but then as I move upward, the areas with red X all cover that entire other half GREEN. Anything I need to do BEFORE I RETRY this? Please help. Keep in mind, area below RED line is section I "stiched" up to this half ot image....
    Thank you

    If you haven't already, click on contiguous in the paint bucket
    tool options bar.
    MTSTUNER

  • Can anyone explain how to use user exit IPRM0002 ?

    pay attention please: my question is not for what it is and I have read all the available documentation.
    if you have an exmple of written code, that would help me a lot.
    thanks

    no answer

  • ZBATMAS03 - extended idoc segment population

    Hi,
    I've found an extended IDoc ZBATMAS03 (basic type: BATMAS03). It's being used for generating outbound IDOc usiong change pointers. A new segment Z1BATMAS has been added to the extended one.
    Now I'm not able to find where this segment is being populated.
    I tried searching in FM: MASTERIDOC_CREATE_SMD_BATMAS and the where used list for the new segment.
    can anyone tell me how to find where the above new segment is being populated?
    regards,
    Ravi

    Hi,
    First up all the FM name is MASTERIDOC_CREATE_SMD_BATMAS, I surprised after dont find any exit for this FM.. May be you need to copy this FM and do the changes... Yes this the FM used to create an Idoc BATMAS.
    You need to create custom function module with reference to standard FM, fill your extension segment.
    Regards,
    Suresh.D

Maybe you are looking for