Extended Withholding Tax not calculating

Hi
We are in ECC 6. In development system, we configured Extended Withhoding Tax for India and tested Vendor Invoice FB60. It works perfectly without any problem. It post separate line item for withholding tax as well.
We moved the configuration to Test system, where it is not working at all. All settings are as similar as development system. Vendor master record also similar as development. The document entered for testing is same as development.
Why it is not calculating Withholding tax in Test system? Is it any thing is to be done manually (like activation), table update.. in client independently?
You suggestion is most impartant.
Thanks
Venkat

Dear Venkatasubramanya,
Check the following Master data in your Test System......
1. Vendor Master Data: Check in Withholding tax tab, whether liable tick is activated or not for your Tax Codes
2. Whether your Withholding tax types are oayment type or invoice type
check in GL Master (Vendor Reco Account), Field Status Group, Whether Withholding tax fields are optional or not.
Best Regards

Similar Messages

Extended Withholding Tax not Posting unless manually entered

Hello.
My problem is that the WH tax calculation and posting does not occur automatically. For the posting to occur, I have to stipulate a WH tax base and WH tax amount in the WH tax tab in FB60.
I've got Extended Withholding activated in the Company Code, and have done what I believe to be all of the configuration. The WH tax type and WH tax code are in the vendor, and the "Subject to WH tax" flag is checked. The configuration is such that the WH tax posts at time of payment, and this posts as required if I feed the transaction the base and tax as noted above.
Any ideas as to what I'm missing?
Thanks and Regards,
David Flores

Hi,
In SPRO Extended W/H Tax>Calculation>Witholding tax Type>Define Witholding Tax type at Invoice posting, double click the tax type and Check what have you selected in Calculation base Amount.
It should be Gross Amount and Post W/tax amount to be ticked.
Regards,
SAPFICO

Withholding tax not calculating in MIRO and calculating in F-43

Hi,
Whenever I am positng invoice thru F-43, Calculating withholding tax amount and generating seperate line item for that.
But for same vendor after posting MM cycle( PO - GR -MIRO) and I am posting Invoice thru MIRO WHT line item not generating while simulating and also after posting.
Checks done :
1. In vendor master data Liable check box is ticked and Tax codes are properly maintained.
2. Minimun and maximum amounts checked.
3.Base amounts checked.
4. Formula for WHT checked
5. I feel if these setting are not good,it should not post in F-43 also. But it is posting in F-43.
Kinldy tell me any specific setting for calculating the WHT thru transaction MIRO
Thanks in advance

Shankar,
Thanks for reply.
If I don't put amount in the basic data tab( MIRO) then it does not allow to "simulate" or "Post". But here I can simulate and Post
I check every thing in WHT Config but I could't found the solution.
I want to tell another thing, we recently went to patch upgrade from Version 4.7 E SP 22 to 4.7 E SP30.
My question, Is the pacth upgrade affects in anyway???
If any suitable answer appreciatable.
Thanks once again for your reply.

Withholding Taxes not calculating

Hi All,
Currently we are using ECC 6.0.
While creating Vendor we are assigning With Holding Tax codes and I created a BP with this Vendor.
Now I created a Lease-In Contract for this BP, but system asking tax types and tax group is mandetory under Posting Parameters tab, but those tax types are belongs to Sales and Purchase tax codes.
So I am unable to do with holding tax calculations and I tried Field status for for Tax types and tax group I did't find.
Please advice me how I can achive this and is there any configuration settings to do with holding tax.
Regards,
CM.

Hi,
While assigning withholding tax code in vendor master for payment postings we should only update the withholding tax type. We must not update the withholding tax code. The reason being system always automatically calculate taxes even in the case of final payment.
You can use report RFWT0010 to adjust the withholding tax information to the relevant withholding tax types. Hope this helps.
Thanks
Neel

F110-Withholding Tax Not Calculating

Dear Gurus,
For ceratin vendors in F110 system is not paying and in payment run log a msg is generated as--Internal Error:Doc Balance not zero.In one vendor there are 2 open items system is calculating WHT for one invoice correctly and showing in payment log for ther other other than posting its its showing at as a difference and sysing that doc balance is not zero.
But when I simulated the 2 invoices separately in F-53 correct WHt is shown but unable to understand why Payment Prog is not calculating for one of the documents.
My client is based out of Thailand both docs have same WHT code and and WHT Type that is at payment.Please help.
Regards
Prabin

You are saying that the invoice which are created with tax codes creates problem when it is paid through F110 that too for certain vendors, right ? Still I am asking, at the time of invoice booking (F-43), the document will have line items with payable amount, tax deductions, etc. right ? This payable amount only will be selected in F110 run. Why then you want to calculate TDS again in F110 ? With regard to your query that it is happening for certain vendors, please check the proper tax codes have been incorporated in the masters and the liable bock check is ticked.

Message FZ626 -Payment orders are not defined for extended withholding tax

Hi Gurus,
Would you please help me with the message below:
Message FZ626 -Payment orders are not defined for extended withholding tax
In my company payment orders are created in F110 for accounts payable, as we use another ERP system (Baan) to perform the local accounts payments, and now I've just activated Extended withholding tax functionality With accumulation (necessary in Brazil) but I get this error.
Is it not possible to user payment order with extended withholding tax + accumulation? I find it hard to believe...
I've tried to unflag the payment order only for the payment method I'm using in FBZP t.code, but then no payment order were created but instead a payment document were posted with the withholding tax accumulation, but this is not the way we are working, and nothing is sent to Baan
any help is welcome !
TREAD LOCKED SINCE IT IS DUPLICATED FROM THREAD payment order are not defined for extended withholding tax

Hi,
On the analysis, the system expects an entry in the T059Q table with
code as XX.
The reason being in the extended withholding tax we use multiple
witholding tax codes and these entries are stored in the table
with_item. And in BSEG we populate the field withholding tax code i.e.
BSEG-QSSKZ with the value 'XX'. In classical withholding tax we used to
store the code directly which is not possible with Extended withholding
tax.
As the field BSEG-QSSKZ refers to the values in the table T059Q-QSSKZ
the entry 'XX" needed in this table for the corresponding country of the
company code to maintain the correct relationship and consistent
database information.
Hence for the statistical purpose and for the internal calculations we
need an entry in the table T059Q. Could you please maintain this code
i.e. 'XX' also in the table T059Q in a test system? Then retest your issue.
This should resolve your issue.
Kind Regards,
Vanessa.

Payment order are not defined for extended withholding tax

Hi Gurus,
Would you please help me with the message below. It appears on F110 when I try to pay a vendor open item with extended withholding tax:
Message FZ626 -Payment orders are not defined for extended withholding tax
In my company payment orders are created in F110 for accounts payable, as we use another ERP system (Baan) to perform the local accounts payments, and now I've just activated Extended withholding tax functionality With accumulation (necessary in Brazil) but I get this error.
Is it not possible to user payment order with extended withholding tax + accumulation? I find it hard to believe...
I've tried to unflag the payment order only for the payment method I'm using in FBZP t.code, but then no payment order were created but instead a payment document were posted with the withholding tax accumulation, but this is not the way we are working, and nothing is sent to Baan
any help is welcome

The payment method "Y" the option "payment order only" was marked?
For a withholding tax type with accumulation in a company code with extended withholding tax payment
methods that create only payment orders can´t be used. Payment orders can only be created only if there are
no tax types with accumulation involved in the paid items of the payment run.
The functionality extended withholding tax works fine for Brazil
however, you can´t use the payment order with this functionality.
Please, review your customizing for payment method 'Y" in transaction
FBZP.
Best regards,
Leonardo Vedovelli
FI Support Engineer
SAP Active Global Support

Withholding tax settings(not extended withholding tax)

Hi,
I am working on withholding tax(not extended withholding tax). Previously we have one company code for that we created withholding tax and withholding tax codes. Now we are going to create another 2 new company codes. Now how to assign the withholding tax codes to the 2 new company codes.
In extended i can assign withholding tax codes to company code but in withholding tax how i can assign withholding tax codes to the 2 new company code.
Regards,
Sankar

Hi
You can assign the same w tax code to another company code also,for that you go through this:
Path: spro>financial global setting>Withholding tax> extended with holding tax
Company code  Assign with holding tax types to company codes
Path: spro>financial global setting>Withholding tax> extended with holding tax
Company code  Activate extended with holding tax
May be this information is useful to you
If you have any doubt feel free to ask
Regards
Surya

Extended Withholding Tax (India)

While testing TDS calculation at the time of payment posting I am facing a problem.
TDS is not being calculated.
System is asking Tax Code of TAXINN tax procedure such as input tax, output tax etc.
I have done the settings of W/H type, code,recipient type, assigning type to co.code and finally assigning the tax type and tax code combinatin to the endor.
In accounnt determination also, I have chosen a bank account in which 'relevant to cash flow' field is marked.
So what checks are required for TDS calculation?
Thanks & Regards
Dhanashree

Hi
Go to FTXP and make the codes....see here what you are refering to is not extended withholding tax ..here you are refering to TDS. first make configuration settings for tax on sales and purchases.
Go to Financial accounting>financial accounting and global settings>AR/AP>tax on sales and purchases.
Check calculation procedure and then assign the same to the country.
Assign points.
Zia

Extended Withholding tax issue

Hi Everyone,
I am facing a problem with my extended withholding tax.. I have done all the configuration and an entry gets created in table WITH_ITEM but this entry is for $0
I go to MIRO Transaction to create my invoice but the base amount is always blank, after that or at same time I can manually enter the base, or the amount but system is not calculating mnually someone could help me or have any idea on this?
Thank you and regards

Hi
Check your with holding tax type configuration what is the basis for calculation of base amount under the below path:
IMG ‡ Financial Accounting ‡ Financial Accounting Global Settings‡ Withholding Tax‡ Extended Withholding Tax ‡ Calculation‡ Withholding Tax Type ‡ Define Withholding Tax Type for Invoice Posting
Depending on this set up, system determines the base amount on which the with holding tax must be calculated. Under the control tab, you may want to remove the manual with holding tax base amount and make sure that one of the radio buttons in Calculation> Base Amount is maintained depending on how you want to calculate the with holding tax
regards
Sanil Bhandari

Extended Withholding Tax in Country DE, Company Code 1000 in ECC 5 IDES

hi all
can we configure extended withholding tax for the company code 1000 in ECC5 IDES. even after making the whole configuration, while maintaining vendor master code an error message is coming.
message: Entry DE 15 does not exist in T059Z - check your entry
Message no. 00058
15 is Tax Code
i am getting some values in the customisation help hit like "Financial Accounting Basic Settings (New)" but it is not available in the IMG MENU. is it not availbale in IDES.
it is very urgent and i am stuck up. pls provide some inputs
regards,
ashok

Please, check in the IMG that you have correctly defined the table
T059Z:
Financial Accounting -> Financial Accounting Global Settings ->
    Withholding Tax -> Extended Withholding Tax -> Calculation ->
    Withholding Tax Codes -> Define withholding tax codes
Please, also check the customizing of the vendor's Account Group
and set the field Tax category as optional:
Trans. OBD3 -> Select account group -> Company Code Data ->
    W/holding tax data, w/h tax 2 -> Withholding tax category
Regards
Siva

Extended Withholding Tax - Minimum Amount

Dear SAP Expert,
In our setup we have extended withholding tax incoming payment for outgoing invoices.
The scenario is if invoice base amount is less than 300 EGP (local curreny) then withholding tax information should not capture invoice document.
I setup minimum based amount on withholding tax type and withholding tax codes level but still when user post outgoing invoices WHT information is captured in FI document.
Because of above issue automatic clearing (F.13) is not happening and we are getting error message like "Items with withholding tax code for customer subject to withholding tax"
looking for expert assistance.
B/R
Prashant Rane

Dear Mani,
Thanks for assistance.
from your example I understand if invoice amount is less than 10,000 then WHT should be applicable.
In my example min invoice amount is 300 EGP
where 2 % WHT is applicable
I wanted to know in which below field I should enter 300 EGP (from your example 10,000)?
Calculation > Withholding Tax Codes > Define Formula for calculating Withholding Tax:
Currency u2013 EGP
W/Tax Type u2013 I2
W/Tax Code u2013 P2
Valid from u2013 01.01.2009
To base amount - 999,999,999,999
W/Tax Rate u2013 2%
Reduced Withholding Tax Rate for Exemption u2013 BLANK
Reduction of Base Amount u2013 BLANK
Decreased Reduction of Base Amount - BLANK
Below is complete customizing I did in my setup
Financial Accounting
Financial Accounting Global Settings
Withholding Tax
Extended Withholding Tax
Calculation > Withholding Tax Type > Define Withholding Tax Type for payment posting:
Withhld tax type u2013 I2
Base Amount u2013 Net Amount
Accumulation Type u2013 No accumulation
Control Data u2013 W/Tax base manual, manual W/tax amnt, w/tax for payments, no cert. numbering
Base amount u2013 W/tax code level
W/tax amount - W/tax code level
Minimum check u2013 Min. base amnt check at doc invoice level
Post W/Tax Amount - YES
Calculation > Withholding Tax Codes > Define Withholding Tax Code:
Withhld tax type u2013 I2
W/tax code - P2
Base Amount u2013 Pecentage subject to tax 100%
Postings Indic- 1
Calculation u2013 W/tax rate u2013 2%
Calculation > Withholding Tax Codes > Define Formula for calculating Withholding Tax:
Currency u2013 EGP
W/Tax Type u2013 I2
W/Tax Code u2013 P2
Valid from u2013 01.01.2009
To base amount - 999,999,999,999
W/Tax Rate u2013 2%
Reduced Withholding Tax Rate for Exemption u2013 BLANK
Reduction of Base Amount u2013 BLANK
Decreased Reduction of Base Amount - BLANK
Calculation > Withholding Tax Codes > Minimum and Maximum Amounts
Min / Max Amounts for W/Tax Type
W/Tax Type u2013 I2
Currency u2013 EGP
Valid from u2013 01.01.2009
Min W/Tax Amount u2013 60
Max W/Tax Amount - 999,999,999,999.00
Min base amount u2013 300
Min / Max Amounts for W/Tax Code
W/Tax Type u2013 I2
W/Tax Code u2013 P2
Currency u2013 EGP
Valid from u2013 01.01.2009
Min W/Tax Amount u2013 60
Max W/Tax Amount - 999,999,999,999.00
Min base amount u2013 300
W/tax base exem amount u2013 BLANK
Company Code > Assign WHT Tax Type To Company Code:
Company Code u2013 0011
W/Tax Type u2013 I2
Customer Data u2013 Subject to W/Tax

Extended Withholding Tax & MIRO - total balance

I have the following situation:
Extended withholding tax is active in company code and the withholding tax type is defined for invoice posting. Everything seems to work correctly except for the following detail: if the invoice has additional charges which are only subject to normal tax rate (VAT) or no tax; then during incoming invoice with MIRO the system cannot balance the accounts; always the difference is the w/t amount even though I have typed the base amount in the corresponding tab. For example, if I receive an invoice for services (no GR) with the following items (the W/T rate is 4% and VAT 16%):
Amount subject to W/T and VAT: 4,600
Other charges (no tax): 194
VAT amount: 736
W/T amount (calculated): 184
Net invoice amount: 5,346
If I type 5346 in the amount field and 4600 in the base amount for w/t then the balance is not correct (difference of 184), unless I type 5530 in the amount field (the others values are calculated correctly).
Am I doing something wrong or missing configuration?
Thanks in advance
JAL

Hi,
The amount payable to vendor is 5346 (ie Gross bill of 5530 (less) withholding tax 184). In the header data, let the amount be maintained as 5530. In the withholding tax tab, change the withholding tax base amount to 4600 and the withholding tax amount as 184. This withholding tax amount gets reduced from the vendor bill of 5530.
On simulation, you can see the screen as per your requirement.
Regards
Hari

Extended withholding Tax in ECC6

Hi All
We have activated extended withholding tax in IDES ECC6.Have completed all the stuff from IMG, while assigning Tax code to Vendot Master, we are not finding the 'WHTType' and 'Liable' field
ready to input. These two fields are disable. Further when we assigned Tax code 'C1' from the dropdown in Tax code field , which is ready to input , it is showing the below error that *'IN C1 are not specified in Table T059Z, though it is there in the said table.
It will be highly appreciable if any one can say the reason or if Notes needs to be applied to activate these fields.
Error Message'
Entry IN C1 does not exist in T059Z (check entry)
Message no. 00058
Diagnosis
Input values must be defined in Table T059Z. The value or values 'IN C1' are not specified in this table.
Procedure
Check whether the input is correct and correct if necessary.
Procedure for System Administration
If this is not an incorrect entry, check the system settings and change them if necessary.
If there is a connection to the Customizing system, you can maintain the system settings by choosing Customizing in the Performance Assistant or Maintain Entries (F5) when displaying the help in a modal dialog box.
Regards
Mukta

Hi ANJIREDDYA
Thanks for response.We maintained this link under Extended Withholding tax-- Calculation-withholding tax code, where we need to define tax type and tax code against country IN. This is coming under table T059Z as well , when we see through SE16.
But still we are not able to assign tax code in Vendor master due to the below error.
Regards
Mukta

S_pl0_09000447- can i use this for Extended Withholding Tax

Dear Gurus,
In my compoany im using Extended Withholding Tax for India, and can i use the Report S_PL0_09000447 - Withholding tax report for the vendor.
Kindly Advice whether can i use this report for EWT or not.
if yes how to use it.
Regards
karthik

Hi,
On the analysis, the system expects an entry in the T059Q table with
code as XX.
The reason being in the extended withholding tax we use multiple
witholding tax codes and these entries are stored in the table
with_item. And in BSEG we populate the field withholding tax code i.e.
BSEG-QSSKZ with the value 'XX'. In classical withholding tax we used to
store the code directly which is not possible with Extended withholding
tax.
As the field BSEG-QSSKZ refers to the values in the table T059Q-QSSKZ
the entry 'XX" needed in this table for the corresponding country of the
company code to maintain the correct relationship and consistent
database information.
Hence for the statistical purpose and for the internal calculations we
need an entry in the table T059Q. Could you please maintain this code
i.e. 'XX' also in the table T059Q in a test system? Then retest your issue.
This should resolve your issue.
Kind Regards,
Vanessa.

Extended Withholding Tax not calculating

Similar Messages

Maybe you are looking for