Extended Withholding Tax not Posting unless manually entered

Hello.
My problem is that the WH tax calculation and posting does not occur automatically. For the posting to occur, I have to stipulate a WH tax base and WH tax amount in the WH tax tab in FB60.
I've got Extended Withholding activated in the Company Code, and have done what I believe to be all of the configuration. The WH tax type and WH tax code are in the vendor, and the "Subject to WH tax" flag is checked. The configuration is such that the WH tax posts at time of payment, and this posts as required if I feed the transaction the base and tax as noted above.
Any ideas as to what I'm missing?
Thanks and Regards,
David Flores

Hi,
In SPRO Extended W/H Tax>Calculation>Witholding tax Type>Define Witholding Tax type at Invoice posting, double click the tax type and Check what have you selected in Calculation base Amount.
It should be Gross Amount and Post W/tax amount to be ticked.
Regards,
SAPFICO

Similar Messages

Extended Withholding Tax not calculating

Hi
We are in ECC 6. In development system, we configured Extended Withhoding Tax for India and tested Vendor Invoice FB60. It works perfectly without any problem. It post separate line item for withholding tax as well.
We moved the configuration to Test system, where it is not working at all. All settings are as similar as development system. Vendor master record also similar as development. The document entered for testing is same as development.
Why it is not calculating Withholding tax in Test system? Is it any thing is to be done manually (like activation), table update.. in client independently?
You suggestion is most impartant.
Thanks
Venkat

Dear Venkatasubramanya,
Check the following Master data in your Test System......
1. Vendor Master Data: Check in Withholding tax tab, whether liable tick is activated or not for your Tax Codes
2. Whether your Withholding tax types are oayment type or invoice type
check in GL Master (Vendor Reco Account), Field Status Group, Whether Withholding tax fields are optional or not.
Best Regards

Payment order are not defined for extended withholding tax

Hi Gurus,
Would you please help me with the message below. It appears on F110 when I try to pay a vendor open item with extended withholding tax:
Message FZ626 -Payment orders are not defined for extended withholding tax
In my company payment orders are created in F110 for accounts payable, as we use another ERP system (Baan) to perform the local accounts payments, and now I've just activated Extended withholding tax functionality With accumulation (necessary in Brazil) but I get this error.
Is it not possible to user payment order with extended withholding tax + accumulation? I find it hard to believe...
I've tried to unflag the payment order only for the payment method I'm using in FBZP t.code, but then no payment order were created but instead a payment document were posted with the withholding tax accumulation, but this is not the way we are working, and nothing is sent to Baan
any help is welcome

The payment method "Y" the option "payment order only" was marked?
For a withholding tax type with accumulation in a company code with extended withholding tax payment
methods that create only payment orders can´t be used. Payment orders can only be created only if there are
no tax types with accumulation involved in the paid items of the payment run.
The functionality extended withholding tax works fine for Brazil
however, you can´t use the payment order with this functionality.
Please, review your customizing for payment method 'Y" in transaction
FBZP.
Best regards,
Leonardo Vedovelli
FI Support Engineer
SAP Active Global Support

Message FZ626 -Payment orders are not defined for extended withholding tax

Hi Gurus,
Would you please help me with the message below:
Message FZ626 -Payment orders are not defined for extended withholding tax
In my company payment orders are created in F110 for accounts payable, as we use another ERP system (Baan) to perform the local accounts payments, and now I've just activated Extended withholding tax functionality With accumulation (necessary in Brazil) but I get this error.
Is it not possible to user payment order with extended withholding tax + accumulation? I find it hard to believe...
I've tried to unflag the payment order only for the payment method I'm using in FBZP t.code, but then no payment order were created but instead a payment document were posted with the withholding tax accumulation, but this is not the way we are working, and nothing is sent to Baan
any help is welcome !
TREAD LOCKED SINCE IT IS DUPLICATED FROM THREAD payment order are not defined for extended withholding tax

Hi,
On the analysis, the system expects an entry in the T059Q table with
code as XX.
The reason being in the extended withholding tax we use multiple
witholding tax codes and these entries are stored in the table
with_item. And in BSEG we populate the field withholding tax code i.e.
BSEG-QSSKZ with the value 'XX'. In classical withholding tax we used to
store the code directly which is not possible with Extended withholding
tax.
As the field BSEG-QSSKZ refers to the values in the table T059Q-QSSKZ
the entry 'XX" needed in this table for the corresponding country of the
company code to maintain the correct relationship and consistent
database information.
Hence for the statistical purpose and for the internal calculations we
need an entry in the table T059Q. Could you please maintain this code
i.e. 'XX' also in the table T059Q in a test system? Then retest your issue.
This should resolve your issue.
Kind Regards,
Vanessa.

Withholding tax settings(not extended withholding tax)

Hi,
I am working on withholding tax(not extended withholding tax). Previously we have one company code for that we created withholding tax and withholding tax codes. Now we are going to create another 2 new company codes. Now how to assign the withholding tax codes to the 2 new company codes.
In extended i can assign withholding tax codes to company code but in withholding tax how i can assign withholding tax codes to the 2 new company code.
Regards,
Sankar

Hi
You can assign the same w tax code to another company code also,for that you go through this:
Path: spro>financial global setting>Withholding tax> extended with holding tax
Company code  Assign with holding tax types to company codes
Path: spro>financial global setting>Withholding tax> extended with holding tax
Company code  Activate extended with holding tax
May be this information is useful to you
If you have any doubt feel free to ask
Regards
Surya

Extended Withholding tax issue

Hi Everyone,
I am facing a problem with my extended withholding tax.. I have done all the configuration and an entry gets created in table WITH_ITEM but this entry is for $0
I go to MIRO Transaction to create my invoice but the base amount is always blank, after that or at same time I can manually enter the base, or the amount but system is not calculating mnually someone could help me or have any idea on this?
Thank you and regards

Hi
Check your with holding tax type configuration what is the basis for calculation of base amount under the below path:
IMG ‡ Financial Accounting ‡ Financial Accounting Global Settings‡ Withholding Tax‡ Extended Withholding Tax ‡ Calculation‡ Withholding Tax Type ‡ Define Withholding Tax Type for Invoice Posting
Depending on this set up, system determines the base amount on which the with holding tax must be calculated. Under the control tab, you may want to remove the manual with holding tax base amount and make sure that one of the radio buttons in Calculation> Base Amount is maintained depending on how you want to calculate the with holding tax
regards
Sanil Bhandari

Extended Withholding Tax - Minimum Amount

Dear SAP Expert,
In our setup we have extended withholding tax incoming payment for outgoing invoices.
The scenario is if invoice base amount is less than 300 EGP (local curreny) then withholding tax information should not capture invoice document.
I setup minimum based amount on withholding tax type and withholding tax codes level but still when user post outgoing invoices WHT information is captured in FI document.
Because of above issue automatic clearing (F.13) is not happening and we are getting error message like "Items with withholding tax code for customer subject to withholding tax"
looking for expert assistance.
B/R
Prashant Rane

Dear Mani,
Thanks for assistance.
from your example I understand if invoice amount is less than 10,000 then WHT should be applicable.
In my example min invoice amount is 300 EGP
where 2 % WHT is applicable
I wanted to know in which below field I should enter 300 EGP (from your example 10,000)?
Calculation > Withholding Tax Codes > Define Formula for calculating Withholding Tax:
Currency u2013 EGP
W/Tax Type u2013 I2
W/Tax Code u2013 P2
Valid from u2013 01.01.2009
To base amount - 999,999,999,999
W/Tax Rate u2013 2%
Reduced Withholding Tax Rate for Exemption u2013 BLANK
Reduction of Base Amount u2013 BLANK
Decreased Reduction of Base Amount - BLANK
Below is complete customizing I did in my setup
Financial Accounting
Financial Accounting Global Settings
Withholding Tax
Extended Withholding Tax
Calculation > Withholding Tax Type > Define Withholding Tax Type for payment posting:
Withhld tax type u2013 I2
Base Amount u2013 Net Amount
Accumulation Type u2013 No accumulation
Control Data u2013 W/Tax base manual, manual W/tax amnt, w/tax for payments, no cert. numbering
Base amount u2013 W/tax code level
W/tax amount - W/tax code level
Minimum check u2013 Min. base amnt check at doc invoice level
Post W/Tax Amount - YES
Calculation > Withholding Tax Codes > Define Withholding Tax Code:
Withhld tax type u2013 I2
W/tax code - P2
Base Amount u2013 Pecentage subject to tax 100%
Postings Indic- 1
Calculation u2013 W/tax rate u2013 2%
Calculation > Withholding Tax Codes > Define Formula for calculating Withholding Tax:
Currency u2013 EGP
W/Tax Type u2013 I2
W/Tax Code u2013 P2
Valid from u2013 01.01.2009
To base amount - 999,999,999,999
W/Tax Rate u2013 2%
Reduced Withholding Tax Rate for Exemption u2013 BLANK
Reduction of Base Amount u2013 BLANK
Decreased Reduction of Base Amount - BLANK
Calculation > Withholding Tax Codes > Minimum and Maximum Amounts
Min / Max Amounts for W/Tax Type
W/Tax Type u2013 I2
Currency u2013 EGP
Valid from u2013 01.01.2009
Min W/Tax Amount u2013 60
Max W/Tax Amount - 999,999,999,999.00
Min base amount u2013 300
Min / Max Amounts for W/Tax Code
W/Tax Type u2013 I2
W/Tax Code u2013 P2
Currency u2013 EGP
Valid from u2013 01.01.2009
Min W/Tax Amount u2013 60
Max W/Tax Amount - 999,999,999,999.00
Min base amount u2013 300
W/tax base exem amount u2013 BLANK
Company Code > Assign WHT Tax Type To Company Code:
Company Code u2013 0011
W/Tax Type u2013 I2
Customer Data u2013 Subject to W/Tax

Migration from Withholding Tax ( Classic ) to Extended Withholding Tax

Dear All,
I am doing the Migration from Withholding Tax ( Classic ) to Extended Withholding Tax, I am getting the following error.
I made all the customization and done the necessary process flow steps.
Now I am doing the last transaction i.e. Migration Programme ( J1INMIG )
I am getting the following error. i.e.
Health Check not carried out or health check has reported errors....
Message no. 8I775
Diagnosis
Before migration of data is carried out, it is advisable to carry out the integrity of customizing in both SAP ECC and CIN.
It appears that either the health check is not carried out, in which case it can be run using transaction j1inhc, or the health check has reported errors.
Procedure
Run health check program if not already run.
Resolve the errors reported in customizing and re run the health check.
In case you do not wish to use health check tool, manually update the field 'STATUS'as 'X' for the company code.
So I checked in Health Check ( J1INHC ). Here All are showing the Green Status.
EXCEPT THE FOLLOWING IS IN YELLOW STATUS .
34            Invoice with Payment Type tax code created in classic cannot be executed after switching to EWT.
               These documents have to be processed before switching to EWT.
               SERIAL NO.     COMPANY   DOCUMENT NO.   POSTING DATE   FISCAL YEAR
               1              ITS       1900000022     09.12.2009     2009
               2              ITS       1900000027     09.12.2009     2009
               3              ITS       1900000023     09.12.2009     2009
               4              ITS       1900000021     09.12.2009     2009
               5              ITS       1900000020     09.12.2009     2009
               6              ITS       1900000019     09.12.2009     2009
               7              ITS       1900000018     09.12.2009     2009
               8              ITS       1900000016     09.12.2009     2009
               9              ITS       1900000024     09.12.2009     2009
               10             ITS       1900000025     09.12.2009     2009
               11             ITS       1900000015     08.12.2009     2009
I noticed that because the above documents are having the openitems and down payments. And If I clear the these documents it is becoming Green Status.
It means now my Health Check is correct, Because all are showing the Green status.
Now If I run the Migration Programme ( ( J1INMIG )
IT IS NOT EXECUTING. IT IS GIVING THE MESSAGE THAT NO DOCUMENTS FOUND.
Kindly advise I don't understand the above Migration programme execution and the error details.
Regards
Kumar

Hi All,
Nobody has not answered my issue.
Otherwise anybody can explain in detail about " MIGRATION PROGRAMME " ( J1INMIG ).
I want details about this last T.Code only i.e. J1INMIG and remaining all the necessary steps I completed.
An early reply will be highly appriciated.
Regards,
K. S. Sai Kumar

Withholding tax-payment posting

Dear all
I am getting an error in which with holding tax calculation for payment posting is not calculated when we enter the invoice f-43. But it shows withholding tax is activated when i enter an invoice. What should i do?
Another error which I am getting is TO43G is missing. This error comes when I enter payment posting in f-53. What should i do? It is related to tolerance group.
Thanks in advance,
A. Anandarajan.

Hi Anandarajan,
Regarding first error, Check your WHt tax type setting. there is a sel. tag for post w/tax amount. check whether it is ticked or not.
In relation to second error create tolerance group for vendor account. Following is the menu path for the same.
IMG -> Fin Actg -> AR/AP -> Busi Tran -> Outgoing payment -> Manual Outgoing payments -> Define tolerances (vendors)
Hope it helps you.
Reward points if it helps.
JS

Extended withholding tax - US Error 7Q 301 updating withholding tax

Cannot get the system to allow me to change the withholding tax information on the accounting documents. Extended withholding tax has been configured. The fields in the line items have been opened to allow changes to the withholding tax data, both for K and S. The venodor has been updated for the withholding tax type and code. Program RFWT0010 does not update any records. The funny thing is it works in the sandbox but not the regular testing dev client. I have compared config and it is the same in both places. Any ideas?
Thank you.

Hi,
Please refer to note 363650, you will see the following information;
C) Change Rules for classical and extended withholding tax If the withholding tax base amount should be changed after a
docment has been paid already, the following steps are required:
For Classical Withholding Tax and only if the withholding tax amount is zero.
Change of withholding tax base amount or withholding tax code of a cleared invoice.
If the withholding tax base amount and/or the withholding tax code needs to be changed after an invoice has been cleared please follow steps;
As you see from the above information the following quotation "only if the withholding tax amount is zero". Is this the case in your scenario?
If a withholding tax amount other than zero has been posted, you cannot change the values via transaction FB02.
Please also review the IMG documentation for transaction OB32 via spro -> Financial accounting -> Financial accounting global settings -> Document -> Line item -> Document change rules, line item. here you will see the following information;
Document Change Rules, Line Item
In this activity, you determine under which circumstances fields within posted documents can be changed.
Note
For a number of fields, the system itself determines that they can no longer be changed after posting. This includes all fields which are central to the principles of orderly accounting, for example, the amount posted and the account.
The system also prevents the update objects from being changed in documents which have already been posted, independent of the document change rules
Thus as you can see from the above description if an amount has been posted to the account you cannot change the fields despite entering in the field in OB32 as changable.
Please also be aware that the important table concerning extended withholding tax is WITH_ITEM. This is where the data found through the button 'Withholding tax Information' in FB03 is held.
(For example in the 'Withholding tax data button' If you click on the help of the field Withholding Code and select the button 'Technical information' you will see that the field name is WT_WITHCD) The fields concerned with same
WITH_ITEM-WT_QSSHB
WITH_ITEM-WT_WITHCD
should be customized in the document change rules (transaction OB32) You will also have to ensure that the posting keys in the document are set to optional (transaction ob41)
Regards
Ravinagh Boni

Extended Withholding tax changeover

Hi, I want to activate extended withholding tax for a company that has not used classic withholding tax. The changeover process only deals with moving from classic to extended. How do i move from nothing to extended ??
transaction WTMG - Company code selection - the system delets company codes for which classic withholding tax has not been used......... so how do I convert the existing data

Hi Dipak,
All invoices posted prior to activating EWT do not get paid - details when displaying the line item within F110 say at the bottom in the Note section "Item cannot be paid due to inconsistent withholding tax information". I tried entering an exemption number on the master record with a date range up to the date of activation, but that makes no difference to the error in F110. If I go into the open items and update them for withholding tax, the items then get paid via F110.
This leads me to believe that all old open items need to be converted.
Regards,
James

Extended Withholding Tax & MIRO - total balance

I have the following situation:
Extended withholding tax is active in company code and the withholding tax type is defined for invoice posting. Everything seems to work correctly except for the following detail: if the invoice has additional charges which are only subject to normal tax rate (VAT) or no tax; then during incoming invoice with MIRO the system cannot balance the accounts; always the difference is the w/t amount even though I have typed the base amount in the corresponding tab. For example, if I receive an invoice for services (no GR) with the following items (the W/T rate is 4% and VAT 16%):
Amount subject to W/T and VAT: 4,600
Other charges (no tax): 194
VAT amount: 736
W/T amount (calculated): 184
Net invoice amount: 5,346
If I type 5346 in the amount field and 4600 in the base amount for w/t then the balance is not correct (difference of 184), unless I type 5530 in the amount field (the others values are calculated correctly).
Am I doing something wrong or missing configuration?
Thanks in advance
JAL

Hi,
The amount payable to vendor is 5346 (ie Gross bill of 5530 (less) withholding tax 184). In the header data, let the amount be maintained as 5530. In the withholding tax tab, change the withholding tax base amount to 4600 and the withholding tax amount as 184. This withholding tax amount gets reduced from the vendor bill of 5530.
On simulation, you can see the screen as per your requirement.
Regards
Hari

Issue with Cross-Company code transactions and Extended Withholding tax

Hi Gurus,
I am having an issue with Cross-company code transaction while posting expense with 2 different company codes.
In the 2 company codes, one company code is setup for Withholding tax and other was not set.
While posting in FB50, I am getting the below message and system does not allow to post the invoice.
Company codes have different settings for withholding tax treatment
Message no. F5786
Diagnosis
You are entering a document containing at least one vendor or customer item and which has line items in several company codes. The extended withholding tax treatment has been set to active in one of these company codes, but not in one of the other company codes.
System Response
You cannot enter this kind of document.
Procedure
Enter the transaction in two documents.
For this I tried to test the transaction by activating of extended Withholding tax for both the company codes. Then the invoice is posting correctly now.
The point is if I activate extended withholding tax for the Company code which is not using the setup, will it face any issues in other areas? and also kindly advice whether is this a right way to set up to fix the current problem.
Thanks for the Support and early response will be appreciated.
JBC.

Hi Mamta,
Thanks for the Response. I think you misunderstood my scenario.
For Eg in FB60 with Co code 5065:
I am debiting the Expenses for Co Code 1000(Witholding tax not active) and crediting the Bank Account of Co Code 5065(Withholding tax setup is done for this co code). When I tried to post with these line items I have getting the error.
Posting        GL                   Co Code
Dr          106520(Exp)            1000
Cr          202020(Bank)           5065
For this I tried by activating the Withholding tax for Co code 1000 which is not active before and post it. The system allows me to post the invoice.
I want to know whether is this a right way to solve this issue and will it impact on any other areas by only activating the Withholding tax for a Co code?
Thanks,
Bapu

About extended withhold tax

dear all,
i have one problem
in extended withhold tax when we made payment or post nvoice tds and ed cess will calculate on which amount is posted then after when we post invoice or made payment on balance amount tds will be deducted but it will calculate and post on total liability in that process liability will be generated two times for that i select in define withhold tax codes central invoice proporationate radio button
for that give me reply
with regards
vasanth

Hi,
I think in your Vendor Master you have maintained the Withholding Tax codes against both Invoice Withholding Tax Type and Payment Withholding Tax Type. What you should do is that do not maintain the Withholding Tax Code for Payment in the Vendor Master.
If you make an advance payment, then enter the withholding tax code at the time of transaction. After you have entered the invoice, clear the advance against the down payment using transaction code F-54. Then the system will adjust the difference TDS
Hope this helps
Regards
Mahendra

Extended Withholding Tax error

I have done EWT configuration. But while posting the entry, TDS is not deducted and no posting to TDS accounts are made.
I have assigned GL accounts & done the settings in sequence given in SAP nodes
What wrong setting i would have done ?

Hi,
1. Please check withholding tax type is assigned to the company code, IMG: Withholding tax>Extended withholding Tax>Company Code>Assigned Withholding Tax Types to Company Code.
Note: also check the here the proper dates u201Cw/tax obligated frmu201D and u201COblig.to w/tax untilu201D e.g. 01.01.1900 and 31.12.9999.
2. Go to OBWW also check the GL is assigned or not.
3. Also check the field status of recon. account & alternative recon account assigned for special GL for down payment, fields e.g withholding tax code and withholding tax amounts etc. should not be suppressed.
Thanks
Javed

Extended Withholding Tax not Posting unless manually entered

Similar Messages

Maybe you are looking for