Extending vlan 301 through ASR 1006 (extending the broadcast domain)
Good evening everyone. My brain hurts trying to figure this out. I'm used to Layer 3 switches so this is different.
According to the documentation, this should be allowed using EVC and Bridge Domains. But there is one disclaimer in the documentation... if you've configured a channel-group on a physical ports, you can't have port-channels (or something like that).
I have configured multiple port-channels (for port redundancy), each port-channel having multiple sub-interfaces (for vlan creation on this beast). Each sub-interface has an ip address. Now it has come to my attention that there are two vlans that need to be extended from a remote office (via port-channel 3) to our Core (via port-channel 1). I want to be clear, I am trying to get this router to simply forward layer 2 traffic from port-channel 1 to port-channel 3. I tried the following:
example: vlans 300 and 301 need to be extended.
create additional sub-interfaces like this,...
int port-channel 1.300
encapsulation dot1q 300
int port-channel 1.301
encapsulation dot1q 301
int port-channel 3.300
encap dot1q 300
int port-channel 3.301
encap dot1q 3.301
But that didn't work. I tried evc and bdi but it's confusing as heck. Anyone got any ideas? Is this possible? Can you point me to a resource that can make it crystal clear for me?
Thank you Reza. I was worried about that.
So I have an opportunity to re-configure this entire beast because of this. If I need to make this work, is the ASR the wrong choice or am I just going about it wrong?
I've read that if I had two ASRs I could implement OTV. Does that make sense?
http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/wan_otv/configuration/xe-3s/wan-otv-xe-3s-book/wan-otv-confg.html#GUID-DCB20ADF-1F8E-434B-AE97-54802879F34F
Similar Messages
-
Extending the SOA Domain to Include BAM after AIA Install
We need to add BAM to our existing AIA installation (11.1.1.4). When trying to extend the domain the BAMSchema does not show up in the Configure JDBC Data Sources screen. Has anyone tried to install BAM into an existing domain and had the same issue? Is there a known work around?
Regards,
AndrewDo you remember whether you created BAM schema at all while running RCU??/
-
ASR 1006, are the SIP and SPA cards Hot-swappable?
I can find references that the SPA cards should be hot-swappable in the form of documents stating you should shut down traffic before removing, but I can not find any clear reference that states that the SPA and the corresponding SIP modules can be pulled while the chassis is on.
Both modular SIPs and SPAs are hot-swappable in ASR1K:
http://www.cisco.com/c/en/us/td/docs/interfaces_modules/shared_port_adapters/install_upgrade/ASR1000/asr_sip_spa_hw/ASRmin.html#73220
http://www.cisco.com/c/en/us/td/docs/interfaces_modules/shared_port_adapters/install_upgrade/ASR1000/asr_sip_spa_hw/ASRsin.html#pgfId-1060193
(Text in the second link begins with "Cisco 7600 series router SIPs and SPAs", but that's a typo, the book is about ASR1K (the statement isn't wrong though - SIPs and SPAs are hot-swappable in the 7600 series as well)) -
ASR 1006 - SIP proxy function available?
Hi there,
I can't find a clear answer to this question.
Can a ASR 1006 act as a SIP proxy? I've many SIP clients at near end, a big SIP server at far end and an ASR 1006 in the middle. Currently we have a SIP adjacency for each SIP client, passing it to SIP server. But this is poorly manageable as the number of clients increases. Can I set somehow the ASR just to work as SIP proxy?
Thanks in advance,
FabioThis is not a new issue - can be seen here
388 -> 688 -> 6150 -> 6310 -> 6310i+1100+ E70-1(3.0633.09.04/crippled VoIP) -
Configure OSB 11g to use the same domain as SOA Suite 11g
Hi,
A quick question on OSB Installation and extend the weblogic domain created for soa for OSB also. Please guide me what i am following is the correct path.
I followed the soa 11g and osb 11g installation doc from Eric Elzinga blog also checked oracle doc. Am quite confused about the directory structure to cofigure SOA Suite 11g and OSB 11g.
After SOA suite install , I Configure Oracle SOA Suite by following the below path
Run: middleware/wlserver_10.3/common/bin/config.exe (followed the blog ON OSB 11g Installation from Eric Elzinga).
I have seen another path to configure soa suite from oracle doc
SOA_ORACLE_HOME\common\bin\config.cmd
eg: E:\oraclehome\11g\middleware\Oracle_SOA1\common\bin\config.cmd
both directory str are correct?
After OSB installation , to configure OSB , I choose to reuse the SOA Suite domain to extend it with the Oracle Service Bus components. so in that case , is it the right directory structure I am following is
<Middleware_Home>\oracle_common\common\bin\config.bat.
eg: E:\oraclehome\11g\middleware\oracle_common\common\bin\config.bat
Thanks in advance
jkEventually you configure the weblogic domain always (either it is for SOA or OSB or BPM or all), so you should use middleware/wlserver_10.3/common/bin/config.exe
Regards,
Anuj -
How to extend the functionality of Smtp through servlets
hi
will some one tell me how to extend the functionality of SMTP server through servelts
bye[samreenkazi],
Here's some code that might help you get a servlet to send e-mails out by using the sun.net.smtp.SmtpClient class:
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
import sun.net.smtp.SmtpClient;
public class SendMailMessageServlet extends HttpServlet {
static final String to = "[email protected]";
public void doGet(HttpServletRequest req, HttpServletResponse res)
throws ServletException, IOException {
res.setContentType("text/html");
PrintWriter out = res.getWriter();
//grab the values of each field
String name = req.getParameter("name");
String feedback = req.getParameter("feedback");
String mailfrom = req.getParameter("mailfrom");
//Notify the sender of his/her feedback
out.println("<HTML>");
out.println("<HEAD><TITLE>Mail sent successfully</TITLE></HEAD>");
out.println("<BODY>");
out.println("Your e-mail has been sent successfully");
out.println("</BODY></HTML>");
//Send an e-mail
SmtpClient smtp = new SmtpClient(); //assume localhost
smtp.from(mailfrom);
smtp.to(to);
PrintStream msg = smtp.startMessage();
msg.println("To: " + to); // mailers will display the To: address
msg.println("From: " + mailfrom); //mailers will display the From: address
msg.println("Subject: Hello World !");
msg.println();
msg.println("Hello World");
smtp.closeServer();
}Note that the sun.net.smtp.SmtpClient class has limited capabilities. A better alternative is to use the JavaMail API and when you download the JavaMail packages, there are some sample example code that may help you.
HTH.
Allen Lai
Developer Technical Support
SUN Microsystems
http://www.sun.com/developers/support/ -
I have an airport extreme and express, if I use the extreme as a base station connected to my old router can I use the express to extend the signal while also creating a new network that only I can use? Essentially having two wifi connection off the same network? If so how do I set this up?
Extending using a wireless connection always results in a performance compromise.
If the Express is going to extend using a wireless connection, then the Express will need to be located about half way between the AirPort Extreme and the general area where you need more wireless coverage. The more that you have line-of-sight between the Extreme and Express, the better the network will operate.
Remember......the Express can only "extend" the quality and signal speed that it receives, so it needs to be located where it can get a very good signal from the Extreme. Although Apple cleverly uses the term "extend", a more accurate term for the Express would be "repeater".
If the Express will extend by connecting to the Extreme using a permanent, wired Ethernet cable connection......highly recommended for best performance.....then the Express can be located exactly where you need more wireless coverage. There is no signal loss at all through the Ethernet cable, so the Express gets a full speed signal no matter where it might be located.
Post back to let us know which way to you want to go. -
How do i extend the bandwidth of my system
The control problem I am having is extending the bandwidth of a force control system. The system is used to apply mechanical load to bone to facilitate research into Osteoporosis. The following concisely describes the system and the different things I have tried to solve the problem,. I imagine it is quite lengthy compared to the usual questions but any advice you have to offer to a Mechanical engineer would be much appreciated.
System Description:
I am using Labview (with Flex motion) to program the NI 7344 motion control servo board (PID update rate of 62.4 micro-seconds). This output signal is then amplified by the MID 7654 power amplifier, supplying current to a Voice coil (this can be considered as a Linear DC motor with a bandwidth of 40Hz). This applies the force to a bone sample. Feedback is then provided by a load cell and connected to the ADC feedback channel of the servo board. (For full specs of all mentioned components please refer to the web links which are listed at the end of this email!)
Problem description:
After optimally tuning the PID characteristics and defining the amplitude and pre-load, I can successfully control a continuous, sinusoidally varying force (frequency 1Hz), however when I try to increase the frequency to 10Hz, the amplitude of the output waveform is marginally reduced�i.e. there is attenuation. I know that the bone sample is not viscoelastic enough to act as a low pass filter. The bandwidth of the Voice coil is not a limiting factor either, so�..
How do I extend the bandwidth of this system?
The following Paragraph describes some of the things I have tried, which have had some or no influence. Being a mechanical engineer I would be grateful for any expert advice.
(Note all results have been verified with an oscilloscope where applicable)
Influential Factors:
1) Method of programming.
To generate the wave form a series of points describing one period are written to a circular buffer on the servo board. The points are executed in 10 milli-second intervals and are splined through using a cubic spline algorithm (hence a period described by 100 points gives us a frequency of 1Hz and a 10 point wave gives us 10Hz). All this happens on the servo board in real time. I am confident that although the integrity of the sine wave is reduced at 10 Hz the amplitude is still described within the 10 points and so is not the reason for attenuation. However this does limit the maximum frequency achievable. (I would say the max frequency is about 20Hz)
2) Redefining the resolution of the of the ADC Feedback
The 12 bit ADC feedback channel is scanned at a rate of 50 micro seconds (faster than the loop update rate which is 62.4 micro-seconds). Initially the voltage range was specified at -/+ 10 V giving 20/(2^12) Volts per significant bit, however I noticed that when I increased the resolution to the max possible by changing the range to 0-5 V (giving 5/(2^12) volts per significant bit), the amount of attenuation was reduced, however there was still some attenuation there. This begs another question why would this factor improve the frequency response???
3) PID characteristics
The system gives an optimum step response when using only a pure integral term and setting Kp= 0, Kd= 0. It seems as though the fastest step response is limited to about 6 milli-seconds. The system is fine tuned and any slight increase in the integral term results in immediate instability. Therefore there is no scope to improve the system bandwidth by altering the PID characteristics.
Can you offer me any expert advice?
Considering this information, what would you advise? Do I need a board with a faster loop update rate ?, I have considered using Labview Real Time, which offers a board with a 26 KHz update rate as apposed to the 16Hz (62.4 micro-seconds) provided by the current board). Do I need to use different control algorithms as apposed to PID, if so which ones???
Any help or advice you have to offer would be much appreciated and could help in the battle against osteoporosis. Should you require more information or would like to speak to me send me an email and I can answer any further questions or give you a ring.
Regards Duncan Webster
Email: [email protected]
Product specs:
Servo board:
http://www.ni.com/pdf/products/us/4mo636-637.pdf
Power amp
http://www.ni.com/pdf/products/us/4mo642-643.pdfHi Duncan,
i'm sorry that this answer took this long, but i think a constructive answer which takes a long time is better than a useless answer in a short time....
For the following thought-provoking impulses we have to consider the signal-change when increasing the frequency. The points which describe the signal get streched over the period. Increasing the frequency enlarges the distance between the points.
a) The spline algorithm could be the problem here hence the signal does not correctly pass through the points anymore with increased frequency. Therefor the amplitude decreases with increased frequency. Perharps another kind of spline algorithm can be helpful.
b) Another point can be the control deviation. Since a feedback control system needs a devia
tion for the control, the deviation gets larger when increasing the frequency of the controlled loop. Maybe the control loop has to set the desired value when already getting to a new point. So the signal could get "washy" and the maximum amplitude is reduced.
In this case, the "Velocity Feedforward"-parameter could be of use. This parameter is to use with caution for it can have similar effects like a too high chosen integral term.
c) You can try to set the 7344 to circular contour. Therefor use 2 axis where you use the second axis as dummy (open step). There is a major disadvantage in this setup: since you use 2 axes at the same time, the 7344 can update each axis only with 125 microseconds. But perharps this is sufficient. Either way the parameter of the control loop have to be adapted (integral term reduced).
d) If the 125 microseconds describend in c) is insufficient, you can try to test it with a 7352. The 7352 can handle 2 axis at a time with a update rate of 62.5 microse
conds for each axis.
I hope this answer helps you in solving your rather special issue.
-Norbert
NI Germany
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it. -
I have installed Airport Extreme on my iMac, but want to extend the wireless to rooms with a weak signal. The internet connection is fine with the basic setup. As soon as I go into Airport Utility to select Extend Wireless Network and fill in what I believe is proper information, I get an error message that Airport Extreme no longer has an IP address, the internet connection is broken, and under Wireless, that there is a wireless network in existence that can't be found. Rebooting the modem only brings the Airport Extreme back to the starting gate so that the internet is once again available. I assumed (naively) that with the All Mac All-the-Time context, adding Airport Express would truly be Plug and Play. I got the plug, but no play. I asked a Comcast technical specialist about it and he said that I needed to reset the Airport Express settings back to their default, factory status. I looked that process up online and found out that the way to do that was to hold down the reset button, then plug Airport Express into the socket and wait for the green light to flash four times. Then wait 45 seconds and the default settings will return. I did all that, only to find out that after the initial flash of green, green never appeared again. I got a fast flashing yellow light, followed by the light going off. Apparently this didn't reset it properly. So, after hours trying to get this system to work, I appeal to someone who can see through this mess and provide the key to success!
highFly376Let's see if I can get this straight.
You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
Correct?
See this Apple document:
http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
The wireless unit on the right of the diagram can be either of the newer Apple base stations.
Extreme, Express, Time Capsule -
Using time capsule to extend the reach of my wireless network
I have a comcast router but wireless coverage only makes it halfway through my apartment. Bought a motorola router for front of apt, attached to cable and time capsule, but I'm not sure what to do next. Do I want to create a separate network or try to extend the comcast network? To make things more fun, my computer will only find the time capsule on one out of 20 scans, the other times nothing shows up. Thanks for any feedback/advice.
You need to use the airport utility on a computer.
If you use v6 utility it is fairly easy and straight forward.
The trick is to place the old TC in the same room as the new one.
Do a full factory reset and then you can just go through the utility to extend wireless network.
I did one post with all the pictures.
https://discussions.apple.com/message/24161378#24161378
If you have issues just ask.
Then you can place the old TC about half way between the new TC and the clients would want to connect.. the half way point is not distance but wireless signal levels.
You can pick that up by using the wireless diagnostics in a mac laptop and walking around to pick up the signals.
This is for extend wireless.. if you want roaming network it is entirely different. That means they are plugged together with ethernet.
Tell us if you mean roaming not wireless extend. -
Best practice on extending the SIEBEL data model
Can anyone point me to a reference document or provide from their experience a simple best practice on extending the SIEBEL data model for business unique data? Basically I am looking for some simple rules - based on either use case characteristics (need to sort and filter by, need to update frequently, ...) or data characteristics (transient, changes frequently, ...) to tell me if I should extend the tables, leverage the 'x' tables, or do something else.
Preferably they would be prescriptive and tell me the limits of the different options from a use perspective.
ThanksAccepting the given that Siebel's vanilla data model will always work best, here are some things to keep in mind if you need to add something to meet a process that the business is unwilling to adapt:
1) Avoid re-using existing business component fields and table columns that you don't need for their original purpose. This is a dangerous practice that is likely to haunt you at upgrade time, or (worse yet) might be linked to some mysterious out-of-the-box automation that you don't know about because it is hidden in class-specific user properties.
2) Be aware that X tables add a join to your queries, so if you are mapping one business component field to ATTRIB_01 and adding it to your list applets, you are potentially putting an unnecessary load on your database. X tables are best used for fields that are going to be displayed in only one or two places, so the join would not normally be included in your queries.
3) Always use a prefix (usually X_ ) to denote extension columns when you do create them.
4) Don't forget to map EIM extensions to the extension columns you create. You do not want to have to go through a schema change and release cycle just because the business wants you to import some data to your extension column.
5) Consider whether you need a conversion to populate the new column in existing database records, especially if you are configuring a default value in your extension column.
6) During upgrades, take the time to re-evalute your need for the extension column, taking into account the inevitable enhancements to the vanilla data model. For example, you may find, as we did, that the new version of the S_ADDR_ORG table had an ADDR_LINE_3 column, and our X_ADDR_ADDR3 column was no longer necessary. (Of course, re-configuring all your business components to use the new vanilla column can also be quite an ordeal.)
Good luck!
Jim -
I would like to extend the screen from my circa 2013 27in iMAC with thunderbolt onto my circa late 2006 imac using the DVI port on that iMAC. Is this possible? If not is there another approach I can use? My 2006 iMAC is showing it's age but I figure I can use it as just a monitor just fine. Assuming I can connect the two together.
That older iMac isn't designed to receive video input through the mini-DVI connection. Only certain newer iMacs are able to be used as displays.
Your only options are to use something like ScreenRecycler mentioned above.
~Lyssa -
ok, i know extending the string class is illegal because it's final, but i want to make an advanced string class that basically "extends" the string class and i've seen online this can be done through wrapper classes and/or composition, but i'm lost
here is my sample code that is coming up with numerous compile time errors due to the fact that when i declare a new AdvString object, it doesn't inherit the basic string features (note: Add is a method that can add a character to a specified location in a string)
class AdvString
private String s;
public AdvString(String s)
this.s = s;
public void Add(int pos, char ch)
int this_len = (this.length()) + 1;
int i;
for(i=0;i<(this_len);i++)
if(pos == i)
this = this + ch;
else if(pos < i)
this = this + this.charAt(i-1);
else
this = this + this.charAt(i);
public static void main(String[] args)
AdvString s1;
s1 = new AdvString("hello");
char c = 'x';
int i = 3;
s1.Add(i,c);
//s2 = Add(s1,i,c);
//String s2_reversed = Reverse(s2);
System.out.println("s1 is: " + s1);
any tips?see REString at,
http://www.geocities.com/rmlchan/mt.html
you will have to replicate all the String methods you are interested in, and just forward it to the String instance stored in REString or the like. it is like a conduit class and just passes most processing to the 'real' string. maybe a facade pattern. -
Extend the material in all plants
hi experts,
can u explain, how to extend the material number in all plants at a time..Hi,
You can use the LSMW for extend the material to all the plants at a time. We have more than 10 plant, we have to extend the one material to 10 plants, 6 sales organization and 4 distribution channels. Through LSMW we will upload at a time.
Reg/ Shankar G. -
Hi guys,
When i extend a VO, it gives me an error of "invalid column index"
I am unable to extend the VO.
What are the various possibilities through which i can extend this VO.
Thanks,
BorisHi,
This is the error i get,
oracle.apps.fnd.framework.OAException: oracle.jbo.AttributeLoadException: JBO-27021: Failed to load CustomDatum value at index 39 with java object of type oracle.jbo.domain.Number due to java.sql.SQLException.
at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:912)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:616)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:251)
at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(OAPageLayoutHelper.java:1191)
at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(OAPageLayoutBean.java:1569)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:968)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:935)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:659)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:251)
at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processRequest(OAFormBean.java:385)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:968)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:935)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:659)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:251)
at oracle.apps.fnd.framework.webui.beans.OABodyBean.processRequest(OABodyBean.java:353)
at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2582)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1913)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:543)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:431)
at OA.jspService(_OA.java:212)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:379)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:259)
at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:51)
at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:193)
at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:284)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198)
at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:395)
at OA.jspService(_OA.java:221)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:379)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
at oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
## Detail 0 ##
java.sql.SQLException: Invalid column index
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:199)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:263)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:271)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:445)
at oracle.jdbc.driver.OracleResultSetImpl.getBytes(OracleResultSetImpl.java:538)
at oracle.jbo.domain.Number$1facClass.createDatum(Number.java:103)
at oracle.jbo.server.OracleSQLBuilderImpl.doLoadFromResultSet(OracleSQLBuilderImpl.java:1194)
at oracle.jbo.server.AttributeDefImpl.loadFromResultSet(AttributeDefImpl.java:1633)
at oracle.jbo.server.ViewRowImpl.populate(ViewRowImpl.java:2221)
at oracle.jbo.server.ViewDefImpl.createInstanceFromResultSet(ViewDefImpl.java:1066)
at oracle.jbo.server.ViewObjectImpl.createRowFromResultSet(ViewObjectImpl.java:3014)
at oracle.jbo.server.ViewObjectImpl.createInstanceFromResultSet(ViewObjectImpl.java:2907)
at oracle.jbo.server.QueryCollection.populateRow(QueryCollection.java:2272)
at oracle.jbo.server.QueryCollection.fetch(QueryCollection.java:2130)
at oracle.jbo.server.QueryCollection.get(QueryCollection.java:1504)
at oracle.jbo.server.ViewRowSetImpl.getRow(ViewRowSetImpl.java:3697)
at oracle.jbo.server.ViewRowSetIteratorImpl.doFetch(ViewRowSetIteratorImpl.java:2818)
at oracle.jbo.server.ViewRowSetIteratorImpl.ensureRefreshed(ViewRowSetIteratorImpl.java:2674)
at oracle.jbo.server.ViewRowSetIteratorImpl.ensureRefreshed(ViewRowSetIteratorImpl.java:2634)
at oracle.jbo.server.ViewRowSetIteratorImpl.getRowCountInRange(ViewRowSetIteratorImpl.java:699)
at oracle.jbo.server.ViewRowSetImpl.getRowCountInRange(ViewRowSetImpl.java:3195)
at oracle.jbo.server.ViewObjectImpl.getRowCountInRange(ViewObjectImpl.java:7027)
at oracle.apps.fnd.framework.server.OAViewObjectImpl.getRowCountInRange(OAViewObjectImpl.java:1981)
at oracle.apps.fnd.framework.webui.OAWebBeanBaseTableHelper.adjustViewRange(OAWebBeanBaseTableHelper.java:226)
at oracle.apps.fnd.framework.webui.OATableHelper.prepareNavigatorProperties(OATableHelper.java:1652)
at oracle.apps.fnd.framework.webui.OATableHelper.prepareForRendering(OATableHelper.java:513)
at oracle.apps.fnd.framework.webui.beans.table.OATableBean.prepareForRendering(OATableBean.java:1220)
at oracle.apps.pon.award.creation.webui.AwardByQuoteCO.setAllColsFormat(AwardByQuoteCO.java:714)
at oracle.apps.pon.award.creation.webui.AwardByQuoteCO.setTableLayout(AwardByQuoteCO.java:528)
at oracle.apps.pon.award.creation.webui.AwardByQuoteCO.processRequest(AwardByQuoteCO.java:211)
at xxifms.oracle.apps.pon.award.creation.webui.xxAwardByQuoteCO.processRequest(xxAwardByQuoteCO.java:52)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:600)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:251)
at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(OAPageLayoutHelper.java:1191)
at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(OAPageLayoutBean.java:1569)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:968)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:935)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:659)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:251)
at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processRequest(OAFormBean.java:385)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:968)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:935)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:659)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:251)
at oracle.apps.fnd.framework.webui.beans.OABodyBean.processRequest(OABodyBean.java:353)
at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2582)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1913)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:543)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:431)
at OA.jspService(_OA.java:212)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:379)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:259)
at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:51)
at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:193)
at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:284)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198)
at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:395)
at OA.jspService(_OA.java:221)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:379)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
at oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
java.sql.SQLException: Invalid column index
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:199)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:263)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:271)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:445)
at oracle.jdbc.driver.OracleResultSetImpl.getBytes(OracleResultSetImpl.java:538)
at oracle.jbo.domain.Number$1facClass.createDatum(Number.java:103)
at oracle.jbo.server.OracleSQLBuilderImpl.doLoadFromResultSet(OracleSQLBuilderImpl.java:1194)
at oracle.jbo.server.AttributeDefImpl.loadFromResultSet(AttributeDefImpl.java:1633)
at oracle.jbo.server.ViewRowImpl.populate(ViewRowImpl.java:2221)
at oracle.jbo.server.ViewDefImpl.createInstanceFromResultSet(ViewDefImpl.java:1066)
at oracle.jbo.server.ViewObjectImpl.createRowFromResultSet(ViewObjectImpl.java:3014)
at oracle.jbo.server.ViewObjectImpl.createInstanceFromResultSet(ViewObjectImpl.java:2907)
at oracle.jbo.server.QueryCollection.populateRow(QueryCollection.java:2272)
at oracle.jbo.server.QueryCollection.fetch(QueryCollection.java:2130)
at oracle.jbo.server.QueryCollection.get(QueryCollection.java:1504)
at oracle.jbo.server.ViewRowSetImpl.getRow(ViewRowSetImpl.java:3697)
at oracle.jbo.server.ViewRowSetIteratorImpl.doFetch(ViewRowSetIteratorImpl.java:2818)
at oracle.jbo.server.ViewRowSetIteratorImpl.ensureRefreshed(ViewRowSetIteratorImpl.java:2674)
at oracle.jbo.server.ViewRowSetIteratorImpl.ensureRefreshed(ViewRowSetIteratorImpl.java:2634)
at oracle.jbo.server.ViewRowSetIteratorImpl.getRowCountInRange(ViewRowSetIteratorImpl.java:699)
at oracle.jbo.server.ViewRowSetImpl.getRowCountInRange(ViewRowSetImpl.java:3195)
at oracle.jbo.server.ViewObjectImpl.getRowCountInRange(ViewObjectImpl.java:7027)
at oracle.apps.fnd.framework.server.OAViewObjectImpl.getRowCountInRange(OAViewObjectImpl.java:1981)
at oracle.apps.fnd.framework.webui.OAWebBeanBaseTableHelper.adjustViewRange(OAWebBeanBaseTableHelper.java:226)
at oracle.apps.fnd.framework.webui.OATableHelper.prepareNavigatorProperties(OATableHelper.java:1652)
at oracle.apps.fnd.framework.webui.OATableHelper.prepareForRendering(OATableHelper.java:513)
at oracle.apps.fnd.framework.webui.beans.table.OATableBean.prepareForRendering(OATableBean.java:1220)
at oracle.apps.pon.award.creation.webui.AwardByQuoteCO.setAllColsFormat(AwardByQuoteCO.java:714)
at oracle.apps.pon.award.creation.webui.AwardByQuoteCO.setTableLayout(AwardByQuoteCO.java:528)
at oracle.apps.pon.award.creation.webui.AwardByQuoteCO.processRequest(AwardByQuoteCO.java:211)
at xxifms.oracle.apps.pon.award.creation.webui.xxAwardByQuoteCO.processRequest(xxAwardByQuoteCO.java:52)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:600)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:251)
at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(OAPageLayoutHelper.java:1191)
at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(OAPageLayoutBean.java:1569)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:968)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:935)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:659)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:251)
at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processRequest(OAFormBean.java:385)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:968)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:935)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:659)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:251)
at oracle.apps.fnd.framework.webui.beans.OABodyBean.processRequest(OABodyBean.java:353)
at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2582)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1913)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:543)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:431)
at OA.jspService(_OA.java:212)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:379)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:259)
at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:51)
at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:193)
at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:284)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198)
at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:395)
at OA.jspService(_OA.java:221)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:379)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
at oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
Maybe you are looking for
-
MySQL and Java - getting program to work
I am setting up mysql to run sql from a Java program on my pc at home and probably biting off more than I can chew. I get these messages when executing the java program ExecuteSQL.java: Exception in thread "main" java.lang.NoClassDefFoundError: Test2
-
A function to give number in numeric to number in English
Dear Oracle experts I just wondering is there any in-built SQL or PL/SQL function which enable me to covert a numeric number like '1' to 'one', '14' to 'Fourteen', '13 to 'thirteen', '113,200.00' to 'one hundred and thirteen thousand two hundred'. ..
-
Central Output Server View Manager on Windows 7, need patch for jfPreview.exe
Where can I obtain the latest version of JfPreView.exe? According to the following webpage: http://helpx.adobe.com/legacy/kb/central-central-pro-output-server-1.html Adobe Central and Central Pro Output Server 5.7, Windows support extended to Windows
-
Please wait while windows configures microsoft visual studio professional 2013
After installing visual community 2013 and rebooting visual studio works fine but all other microsoft office programs display "please wait while windows configures microsoft visual studio professional 2013" and continues the installation for about 1
-
Hi there, Please assist, i'm unable to connect to oracle database via oracle client 11. It was working fine before we had hardware failure on the server. Error i'm getting when running the report on the report server: An error occurred during client