External column picker error

Hi,
I try to set the external column, but I get error:
Application error when access /_layouts/15/Picker.aspx, Error=Value cannot be null. Parameter name: typeName   at System.Type.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase)     at Microsoft.SharePoint.WebPartPages.Utility.GetTypeFromAssembly(String
typeName, Boolean throwOnError, Boolean ignoreCase, Boolean safeLoad)     at Microsoft.SharePoint.ApplicationPages.Picker.OnLoad(EventArgs e)     at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
System.ArgumentNullException: Value cannot be null. Parameter name: typeName    at System.Type.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase)     at Microsoft.SharePoint.WebPartPages.Utility.GetTypeFromAssembly(String
typeName, Boolean throwOnError, Boolean ignoreCase, Boolean safeLoad)     at Microsoft.SharePoint.ApplicationPages.Picker.OnLoad(EventArgs e)     at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> System.ArgumentNullException: Value cannot be null. Parameter name: typeName
at System.Type.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase)     at Microsoft.SharePoint.WebPartPages.Utility.GetTypeFromAssembly(String typeName, Boolean throwOnError, Boolean ignoreCase, Boolean safeLoad)
at Microsoft.SharePoint.ApplicationPages.Picker.OnLoad(EventArgs e)     at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()     at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)A
Please help,
I don't understand, where is the problem.
Thanks,
Mykie

Im seeing a lot of "Nulls" could your ECT not be connecting correctly? I've mentioned on another post about there is a version of SharePoint Designer that has a problem with messing up connections. It wouldn't hurt to uninstall your current
one and install this one.
http://www.microsoft.com/en-us/download/details.aspx?id=35491
Hope this helps. I've been watching this form lately because I was told by my MS support tech this has been an issue with a lot of ECT connections.

Similar Messages

Using External Item Picker in Infopath From, error: not allowed to save the data

1. I have created the infopath form with External item picker field.
2. Deployed as a form library3. field works fine, but error occured while save
the form.4. Got an error from the correlationid as below
State Service StateManager.GetState() Locked data (d96998c8-4460-4cb2-80fa-beffb196e2ad)
Micro Trace Micro Trace Tags: 0 agb9s,12 bm1k,0 bm0t,0 m02x,7 8kfs
Can you tell what is the issue ? Also when I created form infopath form from the sharepoint designer for the list using that external content type, it shows this data type is not allowed in the infopath form.

Hello,
What version of IP form you are using?
BTW worth to read supported data type by infopath for ECT:
https://msdn.microsoft.com/en-us/library/office/ff621597%28v=office.14%29.aspx
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

BCS External Item Picker - Multi Select

Hi,
I've created a ECT using a WCF-Service to consume some sharepoint list data. ECT has a ReadList and ReadItem method.
I embedded a external item picker in a Infopath 2013 form, it's connecting to my ECT and displaying data as expected.
Now I tried to enable the multi select option (beside I tried to enable a default query as well), I cannot get it to work.
When I look at the external item picker url with fiddler, multiselect is always false, defaultquery always empty.
I tried several ECT (a .NET version, even 1 with famous Northwind), but multi select never works.
What is the trick?
KR
Andreas

In the IP form, is the ECT bound to a list column? is that list column configured to allow multiple values?
if IP is being used for an XML form, you might need to have multiple pickers inside a repeating field.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

"This page contains the following errors: error on line 1 at column 1: error on line 1 at column 1: Encoding error Below is a rendering of the page up to the first error"

I am getting this error since purchasing my latest book:
“This page contains the following errors: error on line 1 at column 1: error on line 1 at column 1: Encoding error
Below is a rendering of the page up to the first error”
This message also appears on some, but not all books I purchased earlier.
I've tried to restart my iPhone (5) and downloaded iBooks (and the books itself) again several times but nothing has changed. I’m also synced the iPhone via iTunes without luck.
It’s the latest version of iBooks from Appstore. The same books on iBooks for iPad and Mac working fine!
iOS 7.0.6
iBooks 3.2 (2083)

Did you Reset your iphone?

SAP HANA XSODATA service (Service exception: column store error.)

Hi all,
i have a problem with my calculation view using xsodata service on it. (There's an input parameter called P
_SWERK)
In my calculation view, the data origin are two analytic views (on which the input parameter P_SWERK should be filter data at beginning of the sql script code).
First i read the analytic views with function CE_OLAP_VIEW and after i do a CE_PROJECTION function on them using the input parameter P_SWERK like a filter on field SWERK.
But when i run my application on browser the following error occurs :
<message xml:lang="en-US">Service exception: column store error.</message>
The link is this :
http://host:port/Project_DM/services/Test/TEST_ZIIG_PDM_CALC_VIEW_FINAL_service.xsodata/PianiDiManutenzioneParameters(P_SWERK='CO05')/Results
The service definition is :
service {
"EricssonItalgas/TEST_ZIIG_PDM_VIEW_FINAL.calculationview" as "PianiDiManutenzione" keys generate local "ID"
parameters via entity;
The SAP HANA AWS revision is 60.
Someone could you help me,please?
Thanks in advance.
Dario.

Hi Dario,
Does the calculation view work without xsodata service? From the URL, your XS project name should be Project_DM, but from the xsodata source, the project name is EricssonItalgas. I'm confused with this. Did you use rewrite_rules or?
Best regards,
Wenjun

Error in running a query in XSJS - column store error: [2950] user is not authorized : at ptime/session/dist/RemoteQueryExecution.cc:1354]

Hi All,
I get the below error when i load my xsjs file in browser,
Error while executing query: [dberror(PreparedStatement.executeQuery): 2048 - column store error: column store error: [2950] user is not authorized : at ptime/session/dist/RemoteQueryExecution.cc:1354]
I am able to execute the same query in HANA SQL editor
Please note that ,No Analytical privileges are applied to the view.
Could you please help solving this issue.
Regards,
Logesh Kumar.

Hay,
are you using the same Database user for both SQL Editor and XSJS ?
try the following.
Before executing the query , display it and copy the same from browser and execute in SQL editor.
Put the statement in a try catch block and analyse the exception .
Sreehari

Invalid column Index error - While consuming Calculation view via Native SQL

Hi Experts,
I am trying to consume a Calculation view (sql script one) , which has input parameters, via Native SQL in a ABAP program .
Code snippet for the same would be as follows , Upon execution, it throws an error "Invalid Column Index (8) error " . Can anyone help what could be the issue here ?
Thanks in Advance,
Suma
REPORT ZTEST_HANA2.
*Report to consume Calculation view (script based) from ABAP
PARAMETERS: ip_docnr type BELNR_D,
            ip_gjahr type GJAHR,
            ip_bukrs type BUKRS,
            ip_blgr type FAGL_RLDNR.
   DATA: LO_SQL_STMT TYPE REF TO CL_SQL_STATEMENT,
          LO_CONN     TYPE REF TO CL_SQL_CONNECTION,
          LO_RESULT   TYPE REF TO CL_SQL_RESULT_SET,
          LV_SQL      TYPE STRING,
          LR_DATA     TYPE REF TO DATA.
    DATA: LX_SQL_EXC           TYPE REF TO CX_SQL_EXCEPTION,
          LT_SEPMAPPS_CLSDINV TYPE TABLE OF SEPMAPPS_CLSDINV,
          LV_TEXT              TYPE STRING.
    TRY.
lv_sql = |SELECT * FROM "_SYS_BIC"."DEMO-ABAP/CA_GET_FI_DATA" | &&
                 |WITH PARAMETERS ('placeholder'= ('$$p_DOCNR$$','{ ip_docnr }'),| &&
                  |'placeholder'=('$$p_GJAHR$$','{ ip_gjahr }')| &&
                  |,'placeholder'= ('$$S_BUKRS$$','{ ip_bukrs }')| &&
                  |,'placeholder'= ('$$p_base_ledger$$','{ ip_blgr }') )| .
         LO_CONN = CL_SQL_CONNECTION=>GET_CONNECTION( ).
         "Create an SQL statement to be executed via the connection
          LO_SQL_STMT = LO_CONN->CREATE_STATEMENT( ).
         "Execute the native SQL query
         LO_RESULT = LO_SQL_STMT->EXECUTE_QUERY( LV_SQL ).
         "Read the result into the internal table lt_sepmapps_clsdinv
         GET REFERENCE OF LT_SEPMAPPS_CLSDINV INTO LR_DATA.
         LO_RESULT->SET_PARAM_TABLE( LR_DATA ).
         LO_RESULT->NEXT_PACKAGE( ).
         LO_RESULT->CLOSE( ).
         LO_CONN->CLOSE( ).
    CATCH CX_SQL_EXCEPTION INTO LX_SQL_EXC.
         LV_TEXT = LX_SQL_EXC->GET_TEXT( ).
         MESSAGE LV_TEXT TYPE 'E'.
    ENDTRY.

Hi Suma,
Post the SQL you success run directly on Studio together with error message (even if is the Invalid column index error).
Check there if the parameters case is working properly... Is it really this confusing options:
p_GJAHR
S_BUKRS
p_base_ledger
Why not all lower or all upper? Anyhow you must test and find which option works according your modeling
Regards, Fernando Da Rós

Invalid Column Index Error

Hi all,
I am trying to create a new report using
1. Crystal Report XI
2. Oracle 9i
3. A stored Procedure
4. JDBC connection.
But i could not do it.
Invalid Column index error is coming.
Can anyone help.
Thanks
Saravanakumar.

I know this is an old thread but I too am getting a column index error accessing an Oracle 10g database stored procedure using Crystal Reports XI, using the New Report wizard to select the stored procedure. It prompts me for the sp parameters; I select "set to null" and click OK and get
Failed to retrieve data from the database. Details: SQL Exception: [SQL State:] null [Error message:] Invalid Column Index [Database vendor code 17003]
I can run the procedure and get data just fine with no errors using PL/SQL.

Column alias error in a query of views

Hi
I was trying to workout this query
create view dept_sal as
select d.department_name,sum(e.salary)
from departments d left outer join employees e
on d.department_id= e.department_id
group by d.department_name;
and i recieved this error message .............
Error at Command Line:2 Column:25
Error report:
SQL Error: ORA-00998: must name this expression with a column alias
00998. 00000 - "must name this expression with a column alias"
*Cause:
*Action:
I tried to put an alias for sum(e.salary) function and it worked but i dont understand why it is required or is the problem somewhere else and why an alias is needed here ???
Actually the book hasnt specfied the need for an alias at this place ...so i wanted to know why am getting this error ..
create or replace view dept_sal as
select d.department_name,sum(e.salary) as d_sal
from departments d left outer join employees e
on d.department_id= e.department_id
group by d.department_name;
view DEPT_SAL created.
Also i wanted to know if i can start a thread each time i want have a problem or can i add my questions to somebody
else's thread ..
Thanks
Jayshree

Hi, Jayshree,
to_learn wrote:
Hi
I was trying to workout this query
create view dept_sal as
select d.department_name,sum(e.salary)
from departments d left outer join employees e
on d.department_id= e.department_id
group by d.department_name;
and i recieved this error message .............
Error at Command Line:2 Column:25
Error report:
SQL Error: ORA-00998: must name this expression with a column alias
00998. 00000 - "must name this expression with a column alias"
*Cause:
*Action:
I tried to put an alias for sum(e.salary) function and it worked but i dont understand why it is required or is the problem somewhere else and why an alias is needed here ???Every column in a table or view must have a unique name. If you don't explicitly specify a name for the output column, Oracle will try to generate one based on the input expression. If the name does not follow the normal rules for identifiers (one of which is that the name can't contain special symbols, like parentheses) then the name must be enclosed in double-quotes.
Notice that these rules are a little different from the rules about result sets. In the result set of a main query, for example, column names do not have to be unique, and a system-generated name like 'SUM(E.SALARY)" is acceptable.
Actually the book hasnt specfied the need for an alias at this place ...so i wanted to know why am getting this error ..I can't see which book you're reading. Post a quote. If the book is available on line, post a link, too.
create or replace view dept_sal as
select d.department_name,sum(e.salary) as d_sal
from departments d left outer join employees e
on d.department_id= e.department_id
group by d.department_name;
view DEPT_SAL created.That's the right way to do it.
Also i wanted to know if i can start a thread each time i want have a problem or can i add my questions to somebody
else's thread ..It's better to start your own thread.

How to use : bind character in DB adapter Select Query SOA11g. Getting Error code :17003 .java.sql.SQLException: Invalid column index error

Hi All,
The Actual query to perform is below.
SELECT name,number from emp WHERE CASE WHEN :1='T' AND term_date IS Not NULL THEN 1 WHEN :1='A' AND term_date IS NULL THEN 1 WHEN :1='ALL' THEN 1 ELSE 1 END = 1;
I have tried in DB adapter like below as a parameter for :1 as #vInputParam
SELECT name,number from emp WHERE CASE WHEN #vInputParam='T' AND term_date IS Not NULL THEN 1 WHEN #vInputParam='A' AND term_date IS NULL THEN 1 WHEN #vInputParam='ALL' THEN 1 ELSE 1 END = 1;
Getting Error code :17003 .java.sql.SQLException: Invalid column index error.
Please suggest me on using ':' bind character in DB adapter Select Query SOA11g.
Can someone help me on this please?
Thanks,
Hari

Hi,
Could you please make sure your binding style(Oracle Positional,Oracle named..etc) of the Seeded VO and Custom Vo are same.
This is the option you will get when you are extending your vo. So make sure that both are same.
You can refer the below link too
VO extension leads to "Invalid column index" exception
Thanks
Bharat

Query doesn't work in APD, Error: column store error: fail to create scenario: [340 2048

Hi Experts,
We got a problem here.
We have a query ran without any problems in RSRT. But when I try to put it as data sources(infoprovider) in APD.
I got following error:
column store error: fail to create scenario: [340 2048
We are in BW731006 & ABAP731006.
Any advise?
Thanks in advance!
Tengran

Hi,
Can you check this part in error mentioned by clicking as highlighted in red box. It will give you a correct idea about the issue ::
Also share the detailed error with us as well.
Best Regards,
Arpit

Oracle Invalid Column Name Error in JSP

I was wondering if anyone could provide some help. I am new to JSP, Beans and Oracle and I am getting a java.sql.SQLException: ORA-00904: invalid column name error when I run the JSP below. The Java Bean's code it is referencing is also included and this bean is just storing information from the server from a previous login page.
Eventually I need to display more columns from the database using this JSP, but since I can even get this one working, I am at a loss!
PLEASE HELP!!!!
I have even tried to replace the beans reference in the sql with just a login and password I know exists in the database! Same error... Help!
I am running Tomcat and Oracle 9i!

<html>
<head>
<title>Student Signon on page</title>
</head>
<body bgcolor="#FDF5E6">
<h1 align="center">>Student Signon on page</h1>
<%@ page import="java.sql.*" %>
<%@ page import="BeanAs2.Bean5b" %>
<%
String driverClassString = "oracle.jdbc.driver.OracleDriver";
String driverConnectString;
driverConnectString = "jdbc:oracle:thin:@midas2:1521:globaldb";
String user = "system";
String passwd = "manager";
%>
<jsp:useBean id="Bean5b" class="BeanAs2.Bean5b" />
<jsp getProperty id = "Bean5b" property = "login" />
<jsp getProperty id = "Bean5b" property = "pswd" />
<%
Connection connection = null;
try {
Class.forName(driverClassString);
connection = DriverManager.getConnection(driverConnectString, user, passwd);
catch (Exception e) {
out.println("Cannot close connect to database!"+e);
if (connection != null) {
String login =Bean5b.getpassword();
String pswd =Bean5b.getStudentlogin();
String sql = "SELECT studentinfo.familyname FROM STUDENTINFO WHERE studentinfo.username='login' AND studentinfo.password='pswd';";
try { // execute the query
//SELECT studentinfo.familyname FROM STUDENTINFO WHERE studentinfo.username='s40079703' AND studentinfo.password='p4007swd'
Statement stmt = connection.createStatement();
ResultSet rst;
rst = stmt.executeQuery(sql);
// Fetch the query result, and dispaly them in a table
while (rst.next()) {
%>
<tr>
<td> <%= rst.getString("system.teaching.code") %> </td>
</tr>
<%
stmt.close();
connection.close();
} catch(Exception e) {
     out.println("Cannot fetch data from database!"+e);
%>
</body></html>
package BeanAs2;
import java.util.*;
public class Bean5b {
     // all variables must not be public in a bean
private String Studentlogin;
private String password;
public String getStudentlogin() {
return this.Studentlogin;
public String getpassword() {
return this.password;
     public void setStudentlogin(String login) {
          this.Studentlogin = login;
     public void setpassword(String pswd) {
          this.password = pswd;

Hi
Thanks for your reply, I should of looked at my code before I copied over. The field should of been "studentinfo.familyname" which I was calling, I have just been changing so much code in this to try and see what the problem is, I didnt fix this before I copied this over.... trust me, I have tried everything........ Hence when I correctly called the "concatination the login name and password to the query properly" as you pointed out, I got rid of the error, BUT now it returning NO DATA????? (the table is populated - I have checked this!!!!)
The table I am trying to get information from sits under a schema called system. It has the following columns;
STUDENTID NUMBER 8
FAMILYNAME VARHCAR 60
GIVENNAME VARCHAR 60
USERNAME VARCHAR 9
PASSWORD VHARCHAR 60
The database is called globaldb. My computer is called Midas2
Whats more, the query works in Oracle sql*plus!!! Returning the relevent data!!!
Actually here is the code for the JSP, with all the changes and none of the mistakes of my previous post...........,
Pleaes help!!!
<html>
<head>
<title>Student Signon on page</title>
</head>
<body bgcolor="#FDF5E6">
<h1 align="center">>Student Signon on page</h1>
<%@ page import="java.sql.*" %>
<%@ page import="BeanAs2.Bean5b" %>
<%
String driverClassString = "oracle.jdbc.driver.OracleDriver";
String driverConnectString;
driverConnectString = "jdbc:oracle:thin:@midas2:1521:globaldb";
String user = "system";
String passwd = "manager";
%>
<jsp:useBean id="Bean5b" class="BeanAs2.Bean5b" />
<jsp getProperty id = "Bean5b" property = "login" />
<jsp getProperty id = "Bean5b" property = "pswd" />
<%
Connection connection = null;
try {
Class.forName(driverClassString);
connection = DriverManager.getConnection(driverConnectString, user, passwd);
catch (Exception e) {
out.println("Cannot close connect to database!"+e);
if (connection != null) {
String login =Bean5b.getpassword();
String pswd =Bean5b.getStudentlogin();
String sqlQuery;
sqlQuery = ("SELECT studentinfo.familyname FROM STUDENTINFO WHERE studentinfo.username='" + login + "' AND studentinfo.password='" + pswd + "'"); %>
<% try { // execute the query
Statement stmt = connection.createStatement();
ResultSet rst;
rst = stmt.executeQuery(sqlQuery);
// Fetch the query result, and dispaly them in a table
while (rst.next()) {
%>
<tr>
<td> <%= rst.getString("studentinfo.familyname") %> </td>
</tr>
<%
stmt.close();
connection.close();
} catch(Exception e) {
     out.println("Cannot fetch data from database!"+e);
%>
</body></html>

Invalid column index error in sql developer

Hi,
I was trying to create stored procedures, functions and packages in sql developer which is connected to Oracle 11g. My instructor is able to execute all of them without any errors in 10g. However, when I try to execute them, I get- "Invalid column index error". Any suggestions on how to rectify this error?

Hi,
That is probably an
ORA-17003: Invalid column index
Which is a JDBC error. Is Java/JDBC somehow involved?
If not, could you please post one of the failing statements?
Regards
Peter

Sybase JDBC driver & Invalid column name error

I submitted a note a year ago concerning JDBC-ODBC bridge and SQL Server db. Same Invalid column name error. The resolution was a bug in the XSU code.
This time the error is with a jconnect5 JDBC driver from Sybase to a Sybase ASA db. ASA is Adaptive Server Anywhere.
<ERROR xsql-timing="140">oracle.xml.sql.OracleXMLSQLException: S0022: Invalid column name 'name'.</ERROR>
However if I use a Sybase JDBC driver from INet Software of Germany, I get the desired result of my query.
Below are sample XSQLConfig.xml definitions.
INet Software Sybase JDBC driver definition:
- <connection name="deasa">
<username>dba</username>
<password>sql</password>
<dburl>jdbc:inetsyb:LEMKAU:2638?database=asademo</dburl>
<driver>com.inet.syb.SybDriver</driver>
<autocommit>true</autocommit>
</connection>
Sybase jconnect5 Sybase JDBC driver definition:
- <connection name="asa">
<username>dba</username>
<password>sql</password>
<dburl>jdbc:sybase:Tds:lemkau:2638?ServiceName=asademo</dburl>
<driver>com.sybase.jdbc.SybDriver</driver>
<autocommit>true</autocommit>
</connection>
I believe the bug has to do with the numeric codes that the drivers use to determine data types are not properly interpreted.
See XML General note title "insert-request, xsu 2.1.0 beta & SQL Server" for reference.
Steve.

Thanks for the notification. We will look into this issue...

Case Decode - invalid column name error

select Workweek, max( decode( Type, T34, prct, null ) ) Bad,
                    max( decode( Type, T35, prct, null ) ) Repair,
                    max( decode( Type, T36, prct, null ) ) Good
FROM
(select Workweek, Type, round(ratio_to_report(sum(Testtime_in_Minutes)) over(partition by Workweek)*100,3) prct
FROM
(select ts.lot as Lot, ts.wafer_id as Wafer, dt.SORT_X as X, dt.SORT_Y as Y, ts.devrevstep as PRODUCT, ts.operation as OPERATION, dt.INTERFACE_BIN as INTERFACE_BIN, (dt.TEST_TIME)/60.0 as Testtime_in_Minutes,
ts.TEST_END_DATE_TIME as Test_End_Time, ts.Program_Name, ts.test_end_work_week as Workweek,
(CASE
WHEN (dt.INTERFACE_BIN > 9 AND dt.INTERFACE_BIN < 15) THEN 'T34'
WHEN (dt.INTERFACE_BIN =30 OR dt.INTERFACE_BIN =31 OR dt.INTERFACE_BIN = 32 OR dt.INTERFACE_BIN = 33) THEN 'T35'
     ELSE 'T36'
     END ) Type
from a_testing_session ts, a_device_testing dt
where ts.test_end_work_week >= 200715
and (ts.devrevstep like '9600%')
and dt.lao_start_ww = ts.test_end_work_week
and dt.ts_id = ts.ts_id)
GROUP BY Workweek, Type)
This sql query above does not run properly, gives invalid column name error. However, the entire select statement surrounded by the () works. There must be an error in the first 4 lines someplace, but I do not see it.

Assuming type is a string, I assume you meant
MAX( DECODE( type, 'T34', prct, NULL )) Badwhere T34 is a string literal. Otherwise, you'd need to have columns named T34, T35, and T36 in your inner select.
One note, though, it's probably a bad idea to have a column named Type. While it's legal to do so, TYPE is a keyword in SQL, so that name will at a minimum be confusing.
Justin

External column picker error

Similar Messages

Maybe you are looking for