External hierarchy from R/3 table

Hi,
We need to have a hierarchy in BW from R/3 but it does not have a standard extractor.
i need more details regarding how to create External Hierarchy in BW ,
how to pull the data from R/3 table ,
Should i download to Flatfild and then upload ??
Thanks a lot,
-SS

Sorry cudnt find the time to reply. Today I have a lot of free time !!
1. Let me take an example. Say I want to make a company code hierarchy. The field in R/3 for company code is BUKRS and the table which holds all comp code info is T001. So with this info, lets start.
2. Go to GS01 in R/3. Give a name for SET ID. Enter the table in Basic data. Table would be T001. Select set type as Single set.
3. It will prompt for a field name. Enter BUKRS.
4. Just save the set. You have to create the child sets to be entered inside the set ids section.
Now this would be the parent set under which your child sets would be entered.
Say my comp code hierarchy is as follows:
              1 Z_comp_code
       2 A) Z_NA         2 B ) Z_EUR       2 C) Z_APAC
2 A 1) Z_WEST            2 B 1) Z_GER
2 A 2) Z_NORTH           2 B 2) Z_FRANCE
Your lowest leves would be Z_WEST, Z_NORTH ( in NA area) and Z_GER and Z_FRANCE in Z_EUR area. So create them as basic sets and include the FROM and TO values (company code values).
Z_NA , Z_EUR and Z_APAC can be defined as single sets and include them in the Z_comp_code maintenace. Include Z_WEST, Z_NORTH in Z_NA maintenance. Include Z_GER and Z_FRANCE in Z_EUR maintence.
To create a datasource, go to BW07 in R/3 and create your DS. it would be created with a prefix 4.
Prakash
Assigning points is a way of saying thanks on SDN!!

Similar Messages

Build an R/3 Hierarchy from a Table

Hi all,
Any one has an idea of how I can build an R/3 Hierarchy from an exisiting Table ?
The table gives the relationship between two diffferent objects A & B. For each value for A there are a number of values for B, as defined & maintained in the table. How can I get this into an R/3 hierarchy - to enable me move it into SAP BW ?
Regards,
Uche

Look at table fmhisv.
Rob

How to read the hierarchy data from the same table using loop in AMDP method

Hi All,
We have a requirement to get the top partner from BUT050 table.
Here the Top parent is nothing but the top most in the hierarchy of the partners from BUT050.
Example:
For partner 1234 (BUT050-PARTNER1) there is partner 3523(BUT050-PARTNER2) one level above
For partner 3523(BUT050-PARTNER1) there is partner 4544 (BUT050-PARTNER2) last level .
so in this case for the partner 1234 the Top parent is 4544 .
I have created AMDP Procedure method to get the top-parnet and below given is the logic implemented in AMDP method.
Here i have implemented a recursive logic with the WHILE loop to get the top most hierarchy partner from the same table BUT050
IV_Parent is the input partner and ev_top_parent is the output value.
AMDP Procedure Method:
    DECLARE lv_date VARCHAR(8) := TO_VARCHAR (current_date, 'YYYYMMDD');
    DECLARE found INT := 1;
          iv_partner1 = SELECT partner1 FROM but050
                          WHERE partner2 = iv_partner
                          AND reltyp = :iv_hierarchy
                          AND date_to >= :lv_date
                          AND date_from <= :lv_date;
     WHILE found <> 0 do
       select partner1 into ev_top_parent from :iv_partner1;
                       iv_partner1 = SELECT partner1 FROM but050
                       WHERE partner2 in ( select partner1 from :iv_partner1 where partner1 is not null)
                       AND reltyp = 'ZBP004'
                       AND date_to >= :lv_date
                       AND date_from <= :lv_date;
       select COUNT ( partner1 ) INTO found FROM :IV_PARTNER1;
    END WHILE;
This method is working fine, but here it is only taking one single partner and getting the top parent as output.
Now i would like to convert this mehtod so as to accept n number of partners (not one single partner) as input and should process each partner to get the top parent.
Could anyone guide me how can i handle the given AMDP method further so as to work some how it is within another loop from other AMDP method.
Thanks.
Regards,
Laxman.P

Hi
Go to SE11 and enter the hierarchy table name.
/BIC/H....(infoobject name)...and execute the table and select table entry and delete all....
Thanks
TG

Hierarchy extraction from R/3 Table to BW

Hi Gurus/All,
I need extract the Organizations Hierarchy Structure data from R/3 "Z table".Please any one can give me the detailed steps to extract the Hierarchy data from R/3 "z table" in to Bw.It is Masterdata extraction and the hierarchy has 5 levels.
Please send me the links or detailed steps to extract in to Bw hierarchy from R/3 "Ztable".Also I would like to know the settings/Must do's on R/3 side.It is urgent
regards
Prasad

Hi Shailaja,
http://www.bwexpertonline.com/archive/Volume_03_(2005)/Issue_08_(September)/V3I8A2.cfm?session=
I have tried to open above mentioned link, but itz not gettting there.
Can you send me the article to my email: [email protected]
Thanks to you,
Rafi

Syntax error while loading hierarchy from an external file

Dear Expert:
I am new to BW and I met a problem today while loading hierarchy from an external file. Actually I am following below article to load the hierarchy:
/people/prakash.bagali/blog/2006/02/07/hierarchy-upload-from-flat-files
When I schedule the infopackage, the error message says: "Syntax error in template RSTMPL9C, ROW 76". Actually there is only around 20 lines of records.
Since I am not familiar with hierarchy load, so:
1. while loading from external file, do I need to create one hierarchy in advance through "Maintain Hierarchies" in the infoobject? My understanding is since I can load that hierarchy from file, so I do not need to create one in advance, once the load completed, the hierarchy should automatically generated there. Is my understanding correct?
2. Before loading the hierarchy, do I need to load the master data of external characteristics in the hierarchy first? Here in my example, the sales hierarchy has 2 external characteritics (Country and region) in the hierarchy. Do I need to load some data first?
3. My 'Preview' function in the infopackage is gray so that I can not test the data loading. Why is it gray?
Information like file name, file dir, file type(csv), seperator should be correct there.
Can anybody help me take a look into that? Many thanks for your time in advance!
Tim

Hi ctsiszidane:
There are some other SAP Notes that can help you solve the problem. Depending on your Support Package level check which of them is applicable.
Note 659461 - RSAR 682: Syntax error in template RSTMPL9A, row 246
Note 605690 - Escape characters are not processed correctly
Note 620152 - Syntax error in RSTMPL9A during data loading from a file
Regards,
Francisco Milán.

Can OBIEE handle hierarchy built from different dimension tables?

Can I build an hierarchy with values at various levels appearing from other dimension tables in the model ?
Thanks

Hi,
if you want to drill in Answers from an attribute of a dimension to the attribute of anothr dimension, you can use the Preferred Drill Path inside the level of an hierachy.
For example:
Dime Time
-Year
--Month
---Day
Dim Geography
-Continent
--Nation
---City
If you set in the Month level of the Dim Time the Preferred Drill Path to Nation, in Answer when you drill from Month you see Nation.
I hope it helps.
Regards,
Gianluca

0Vendor Hierarchy from table LFMH

Hi all,
our ECC process team maintaining a VENDOR-Hierarchy with TCode MKH1. The hierarchy is stored in table LFMH.
Does anybody know if there is a "BI-Content" to extract that table to use it as datasource for the Vendor-Hierarchy in BI?
I know that there is a standard datasource for Vendor-Hierarchy but this will be filled via Vendor-Class which is not used for our scenario.
I am thankful for all ideas regarding to that topic.
Thanks in advance
Martin

you can create a generic datsource from BW07.

Extract Hierarchy from LFMH(Vendor Hierarchy) table using generic datasourc

Hi All,
Can any one provide the steps to Extract Vendor Hierarchy from table LFMH? And also provide ABAP code (Function module) to extraact Vendor Hierarchy
Thank You
Rahul

Hi,
Let me know your email address, i can forward the required document to you or mail me @ [email protected]
regards,
ravi

Hierarchy from Ztable

Hi Experts
Does any one have idea how to load the hierarchy to BW from Ztable in R3. The one way I know is to import the Ztable data into Flat file and load it in to BW.
If you know any other best solution using which I can eliminate flat file load , please let me know.
thanks,
Raj.

Hi Raj,
Even though if your data in your Z-table in tree structure you have to download the data into flat file and then you have upload the same. I think you cannot create Generic datasource for Hierarchy.
If you have your data in Flat structure in the table then this same code may help you.
*               PROGRAM FOR GL ACCOUNT HIERARCHY
* Program name           : GL hierarchy
* Program Description    : Report
* Technical Object No    :
* Developer              : N.S.Balaji
* Level2 Analyst/FC      :
* Company                :
* Start Date             :
* End Date               :
* Initial CTS            :
* Description            :
* Transaction            : NA
* External References    : NA
* Logical Database       : NA
* Function Modules       : NA
* Includes               : NA
*                    MODIFICATIONS lOG
* Developer              :
* Level2   Analyst       :
* Start Date             :
* End Date               :
* CCP/PQR/TDL No.        :
* CM No:                     DATE:               CTS:
* Description            :
report zbiw_glacc_hier line-size 250.
data :
     begin of itab occurs 0,
      seg(5),
      segname(30),
      spu(5),
      spuname(30),
      bu(5),
      buname(30),
      pu(15),
      puname(30),
*      cust(8),
*      custname(60),
      end of itab.
data : itab_all like itab occurs 0 with header line,
         itab_root like itab occurs 0 with header line.
data : begin of i_hier occurs 0.    " BIW Structure to hold hirearchy
*        INCLUDE STRUCTURE E1RSHND.
data:   nodeid like e1rshnd-nodeid,           "NODE ID
        infoobject like e1rshnd-infoobject,   "infoobjectNAME
        nodename like e1rshnd-nodename,       "nodename year
        link(5), "   LIKE E1RSHND-LINK,              "linkname
        parentid like e1rshnd-parentid.       "parent id
data:   leafto(32),                           "Interval - to
        leaffrom(32).                         "Interval - from
        include structure e1rsrlt.
        include structure rstxtsml.
*DATA : PARENT LIKE E1RSHND-NODENAME.
data : end of i_hier.
data : sr(8) type n value '00000000'.
data : begin of itab1 occurs 0, " Node Level1 of Hierarchy
       z_ah_level1 like itab-seg,
       z_ah_level2 like itab-spu,
       z_ah_desc_level2 like itab-spuname,
       end of itab1.
data : begin of itab2 occurs 0, " Node Level1 of Hierarchy
       z_ah_level2 like itab-spu,
       z_ah_level3 like itab-bu,
       z_ah_desc_level3 like itab-buname,
       end of itab2.
data : begin of itab3 occurs 0,   " Node Level3 of Hierarchy
       z_ah_level3 like itab-bu,
       z_ah_level4 like itab-pu,
       z_ah_desc_level4 like itab-puname,
       end of itab3.
data wa like itab.
data : begin of itab_first occurs 0, " Node Level2 of Hierarchy
       z_ah_level1 like ITAB-SEG,
       end of itab_first.
data : begin of itab_sec occurs 0, " Node Level2 of Hierarchy
       z_ah_level2 like ITAB-SPU,
       end of itab_sec.
data : begin of itab_third occurs 0, " Node Level2 of Hierarchy
       z_ah_level3 like ITAB-BU,
       end of itab_third.
data : begin of i_download occurs 0,
       record(250),
       end of i_download.
data : v_pid like e1rshnd-nodeid,
       v_line(250).
start-of-selection.
CALL FUNCTION 'UPLOAD'
EXPORTING
*   CODEPAGE                      = ' '
   FILENAME                      = 'C:/'
   FILETYPE                      = 'DAT'
TABLES
    DATA_TAB                      = itab .
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
itab_all[] = itab[].
itab_root[] = itab_all[].
sort itab_all by seg spu bu pu .
sort itab_root by seg.
delete adjacent duplicates from itab_root comparing seg.
* Appending Root level of node
* sr = 00000001.
* move : sr to i_hier-nodeid,
*        '0HIER_NODE' to i_hier-infoobject,
*        'SHA HIERARCHY' to i_hier-nodename,
*        '00000000' to i_hier-parentid,
*        'EN' to i_hier-langu,
*        'SHA HIERARCHY' to i_hier-txtmd.
* append i_hier.
* clear i_hier.
v_pid = '00000000'.
loop at itab_root.
if itab_root-seg = itab_root-spu.
delete itab_root.
endif.
endloop.
loop at itab_root.
* Appending first level of the node
    sr = sr + 1.
    move : sr to i_hier-nodeid,
          '0HIER_NODE' to i_hier-infoobject,
           itab_root-seg to i_hier-nodename,
           v_pid to i_hier-parentid,
          'EN' to i_hier-langu,
          itab_root-segname to i_hier-txtsh,
          itab_root-segname to i_hier-txtmd,
          itab_root-segname to i_hier-TXTLG.
    append i_hier.
    clear i_hier.
endloop.
loop at itab_all.
    move itab_all to wa.
* Separation of level 3 of the node
    at new spu.
      if not wa-spu is initial.
        move : wa-seg to itab1-z_ah_level1,
               wa-spu to itab1-z_ah_level2,
               wa-spuname to itab1-z_ah_desc_level2.
        append itab1.
        clear itab1.
      endif.
    endat.
* Separation of level 3 of the node
    at new bu.
      if not wa-bu is initial.
        move : wa-spu to itab2-z_ah_level2,
               wa-bu to itab2-z_ah_level3,
               wa-buname to itab2-z_ah_desc_level3.
        append itab2.
        clear itab2.
      endif.
    endat.
* Separation of level 2 of the node
    at new pu.
      if not wa-pu is initial.
        move : wa-bu to itab3-z_ah_level3,
               wa-pu to itab3-z_ah_level4,
               wa-puname to itab3-z_ah_desc_level4.
        append itab3.
        clear itab3.
      endif.
    endat.
    clear wa.
endloop.
sort itab1 by z_ah_level1 z_ah_level2.
delete adjacent duplicates from itab1 comparing z_ah_level1
                                              z_ah_level2.
sort itab2 by z_ah_level2 z_ah_level3.
delete adjacent duplicates from itab2 comparing z_ah_level2
                                                  z_ah_level3.
sort itab3 by z_ah_level3 z_ah_level4.
delete adjacent duplicates from itab3 comparing z_ah_level3
                                                  z_ah_level4.
loop at itab_root.
move itab_root-SEG to itab_first-z_ah_level1.
append itab_first.
clear itab_first.
endloop.
itab_sec[] = itab2[].
itab_third[] = itab3[].
sort itab_first by z_ah_level1.
delete adjacent duplicates from itab_first.
sort itab_sec by z_ah_level2.
delete adjacent duplicates from itab_sec.
sort itab_third by z_ah_level3.
delete adjacent duplicates from itab_third.
data : indx like sy-tabix.
clear indx.
loop at itab_first.
indx = sy-tabix.
read table itab_sec with key z_ah_level2 = itab_first-z_ah_level1
                        binary search.
if sy-subrc eq 0.
delete itab_first index indx.
endif.
endloop.
clear indx.
loop at itab_sec.
indx = sy-tabix.
read table itab_third with key z_ah_level3 = itab_sec-z_ah_level2
                        binary search.
if sy-subrc eq 0.
delete itab_sec index indx.
endif.
endloop.
clear indx.
clear indx.
loop at itab1.
If itab1-z_ah_level1 = itab1-z_ah_level2.
delete itab1.
endif.
endloop.
loop at itab2.
If itab2-z_ah_level2 = itab2-z_ah_level3.
delete itab2.
endif.
endloop.
loop at itab3.
If itab3-z_ah_level3 = itab3-z_ah_level4.
delete itab3.
endif.
endloop.
* Appending First level node to Hierarchy table
loop at itab_root.
    loop at itab1 where z_ah_level1 = itab_root-SEG.
      read table i_hier with key nodename = itab1-z_ah_level2.
       if sy-subrc ne 0.
      read table i_hier with key nodename = itab1-z_ah_level1.
      if sy-subrc eq 0.
      move i_hier-nodeid to i_hier-parentid.
* Appending First level node to Hierarchy table
      sr = sr + 1.
      move : sr to i_hier-nodeid,
              '0HIER_NODE' to i_hier-infoobject,
              itab1-z_ah_level2 to i_hier-nodename,
              'EN' to i_hier-langu,
              itab1-z_ah_desc_level2 to i_hier-txtsh,
              itab1-z_ah_desc_level2 to i_hier-txtmd,
              itab1-z_ah_desc_level2 to i_hier-txtlg.
      append i_hier.
      clear i_hier.
      endif.
      endif.
    endloop.
endloop.
* Appending second level node to Hierarchy table
loop at itab_sec.
    loop at itab2 where z_ah_level2 = itab_sec-z_ah_level2.
      read table i_hier with key nodename = itab2-z_ah_level3.
       if sy-subrc ne 0.
      read table i_hier with key nodename = itab2-z_ah_level2.
       if sy-subrc eq 0.
      move i_hier-nodeid to i_hier-parentid.
* Appending second level node to Hierarchy table
      sr = sr + 1.
      move : sr to i_hier-nodeid,
            '0HIER_NODE' to i_hier-infoobject,
            itab2-z_ah_level3 to i_hier-nodename,
            'EN' to i_hier-langu,
            itab2-z_ah_desc_level3 to i_hier-txtsh,
            itab2-z_ah_desc_level3 to i_hier-txtmd,
            itab2-z_ah_desc_level3 to i_hier-txtlg.
      append i_hier.
      clear i_hier.
     endif.
     endif.
    endloop.
endloop.
* Appending third level node to Hierarchy table
loop at itab_third.
    loop at itab3 where z_ah_level3 = itab_third-z_ah_level3.
      read table i_hier with key nodename = itab3-z_ah_level4.
    if sy-subrc ne 0.
      read table i_hier with key nodename = itab3-z_ah_level3.
       if sy-subrc eq 0.
      move i_hier-nodeid to i_hier-parentid.
* Appending third level node to Hierarchy table
      sr = sr + 1.
      move : sr to i_hier-nodeid,
*            'ZGL_AC_CD' to i_hier-infoobject,
            '0GL_ACCOUNT' to i_hier-infoobject,
            itab3-z_ah_level4 to i_hier-nodename,
            'EN' to i_hier-langu,
            itab3-z_ah_desc_level4 to i_hier-txtsh,
            itab3-z_ah_desc_level4 to i_hier-txtmd,
            itab3-z_ah_desc_level4 to i_hier-txtlg.
      append i_hier.
      clear i_hier.
      endif.
        endif.
    endloop.
endloop.
loop at i_hier.
    concatenate i_hier-nodeid i_hier-infoobject i_hier-nodename
                i_hier-link i_hier-parentid i_hier-leafto
                i_hier-leaffrom i_hier-langu i_hier-txtsh
                i_hier-txtmd i_hier-txtlg into v_line
                separated by ','.
    move v_line to i_download-record.
    append i_download.
    write : / i_hier.
endloop.
perform f_download.
**&      Form f_download
**       text
** --> p1        text
** <-- p2        text
form f_download.
call function 'DOWNLOAD'
   exporting
*   BIN_FILESIZE                  = ' '
*   CODEPAGE                      = ' '
*   FILENAME                      = ' '
      filetype                      = 'DAT'
*   ITEM                          = ' '
*   MODE                          = ' '
*   WK1_N_FORMAT                  = ' '
*   WK1_N_SIZE                    = ' '
*   WK1_T_FORMAT                  = ' '
*   WK1_T_SIZE                    = ' '
*   FILEMASK_MASK                 = ' '
*   FILEMASK_TEXT                 = ' '
*   FILETYPE_NO_CHANGE            = ' '
*   FILEMASK_ALL                  = ' '
*   FILETYPE_NO_SHOW              = ' '
*   SILENT                        = 'S'
*   COL_SELECT                    = ' '
*   COL_SELECTMASK                = ' '
*   NO_AUTH_CHECK                 = ' '
* IMPORTING
*   ACT_FILENAME                  =
*   ACT_FILETYPE                  =
*   FILESIZE                      =
*   CANCEL                        =
    tables
      data_tab                      = i_download
*   FIELDNAMES                    =
* EXCEPTIONS
*   INVALID_FILESIZE              = 1
*   INVALID_TABLE_WIDTH           = 2
*   INVALID_TYPE                  = 3
*   NO_BATCH                      = 4
*   UNKNOWN_ERROR                 = 5
*   GUI_REFUSE_FILETRANSFER       = 6
*   CUSTOMER_ERROR                = 7
*   OTHERS                        = 8
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.                    " f_download
this code may need modification as your requirement and this may be the optimized one.
First you have to read data from you Z-table into internal table then need to separate a each node level.
hope this helps.
Cheers,
Balaji

What's the best way to create XML file with a schema from a database table?

Hi,
I want to create an XML file from a database table (which has over 600 columns) using XML schema (.xsd file). I want to know the best way to do this.
The output XML file is NOT a direct data dump from the DB table, there�re some logic around it, such as the XML file has some hierarchy with repeating tags.
I have done this using JAXB by creating Java classes form XML schema, but I don�t want to map 600 DB columns to these Java classes manually, and loop through the record set to create repeating tags.
I know there are few tools around now like MapForce (Altova), how do people do these now?
Thanks,
Chandi

Can you use a schema when we compose XML doc from Database tables?
Actually, I'm using SQL Server (sorry, wrong forum). But, I thought a Java tool would have a solution for me.

Numbering nodes when loading hierarchy from a flat file.

Hi All,
I want to load a hierarchy from a flat file. When we number the nodes, do they have to be in a sequence or can I give them any number I want? I want to make the GL account number as the node number since it makes it easy to generate the node number that way. The way I see it, the important thing is the parent node number; so this approach should be fine. Please correct me if I am wrong.
Thanks,
Uday

Hi Uday,
   You need to have a running sequence numbers for Node Id field in the flat file. The file structure is as
NODEID IOBJNM      NODENAME TLEVEL LINK PARENTID
00000001 0GLACC     GL233344             00000001
00000002 0GLACC     GL435556             00000001
00000003 0GLACC     GL545666             00000001
00000004 0costcenter cc433232            00000002
00000005 0costcenter cc433233            00000002
00000006 0costcenter CC555551            00000003
The Parentid will calculated by the system automatically.
when you prepare you file csv please ensure that you have 8 characters for the Node ID " 00000003" other wise you will get error.
And if you want to add GL Account number to your hierarchy then you need to add GL A/c Number as external characteristics in hierarchy and add it to your flat file .
Hope it helps.
Cheers,
Balaji

How to Create and External Hierarchy and group values of IO in node

Good morning
BI 7:
Please give me guidance on the following?
I need to either to restrict a characteristic in a query to more than 800 values OR exclude values where it contains the pattern 'Z7' and 'Z8'. There are thousands of values which contains the pattern and they are not listed in such a way that I can exclude them as a value range, thus I would have to include all the values I want into the restriction, which is more than 800. An error displays when I check the query:
""In the structural component Warranty Damage Code, characteristic ZWR_DMGC is restricted to 838 values. This number is very large and will probably meet with technical limitations""
The proposed solution is:
""Create an external hierarchy for characteristic ZWR_DMGC and group the 838 values in a hierarchy node. You can then work with the node instead of the 838 individual values.
Alternatively, you can define a corresponding navigation attribute for ZWR_DMGC""
I know where to create the hierarchy, but I am confused how to only include the values of the applicable IO where pattern contains 'Z7' and 'Z8'.......??
The following are some of the steps proposed in a related thread, but I am loosing it at step 7.
5. Confirm your entries. The Maintain Hierarchy screen appears. You can define the structure of a hierarchy here. ok
6. To create a hierarchy node, you first need to choose an insertion mode: Insert as First Child or Insert As Next Neighbor (see Hierarchy Editing Functions). I selected first child
7. Choose the type of node you want to create: Text Node, Characteristic Node, <Hierarchy Basic Characteristic Node> or Interval (see Hierarchy Nodes) *this is where I am lost, which should I select to list values with pattern ' *Z7' and ' Z8' in a node or two
8. Repeat this procedure until the hierarchy structure has been set. For more information, see Modeling Nodes and Leaves.
A hierarchy can contain 50,000-100,000 leaves at most. If your hierarchy is larger, you should insert a level that is used as a navigation attribute or preferably as a separate characteristic in the dimension table.
9. You can use Level Maintenance and Hierarchy Attributes to set how the hierarchy is to be displayed and processed in reporting (see Level Maintenance and Hierarchy Attributes).
10. Save the hierarchy.
Your assistance will be appreciated.

Hierarchy not used in this case. Could not fnd an answer.

How to Insert data from notepad to Table

Hi,
I have one table with nodata.i need to insert data into table.but i have records in one notepad.if i enter manually
like using insert statement it will take more time.
Any one know insert data from notepad to table or i need sql script that will use for all the records.Here im using sqldeveloper.

Hi dude,
We can use below 2 types.
1) Sql loader
2) utl file
SQL*Loader utility?
One can load data into an Oracle database by using the sqlldr (sqlload on some platforms) utility. Invoke the utility without arguments to get a list of available parameters. Look at the following example:
sqlldr username@server/password control=loader.ctl
sqlldr username/password@server control=loader.ctlThis sample control file (loader.ctl) will load an external data file containing delimited data:
load data
infile 'c:\data\mydata.csv'
into table emp
fields terminated by "," optionally enclosed by '"'
( empno, empname, sal, deptno )
{code}
The mydata.csv file may look like this:
{code}
10001,"Scott Tiger", 1000, 40
10002,"Frank Naude", 500, 20
{code}
Optionally, you can work with tabulation delimited files by using one of the following syntaxes:
{code}
fields terminated by "\t"
fields terminated by X'09'
{code}
Additionally, if your file was in Unicode, you could make the following addition.
{code}
load data
CHARACTERSET UTF16
infile 'c:\data\mydata.csv'
into table emp
fields terminated by "," optionally enclosed by '"'
( empno, empname, sal, deptno )Another Sample control file with in-line data formatted as fix length records. The trick is to specify "*" as the name of the data file, and use BEGINDATA to start the data section in the control file:
load data
infile *
replace
into table departments
( dept     position (02:05) char(4),
    deptname position (08:27) char(20)
begindata
COSC COMPUTER SCIENCE
ENGL ENGLISH LITERATURE
MATH MATHEMATICS
POLY POLITICAL SCIENCEPlease refer the below link.. it will useful for you.
http://psoug.org/reference/sqlloader.html
http://docs.oracle.com/cd/B10500_01/server.920/a96652/ch05.htm
Regards,
N.Senthil.

Can't find the topics from the main table of contents

I need urgent help. I am still running RH 8 for Word (2007). I published the entire project. When testing the main table of contents, the books and topics appear as expected, but when I try to go to any of the topics I get the message:
The topic does not exist. Contact your application vendor....
From the individual projects I can see the topics. When I publish them and view the contents all seem to work fine, but it does not when viewing the entire project from the main table of contents.
The main project looks as follows:

Tried that and still have the problem. The RH help lists the following workaround for the error
message :
To workaround this WinHelp viewer limitation, you can either manually insert the Help filename statement on every page of the external CNT file or allow RoboHelp to automatically do it for you:
1 Open the Help file containing the included external CNT file.
2 From RoboHelp Explorer’s File menu, select Project Settings.
3 Select the Contents tab.
4 Select the Include Help filename with pages option. When you save the TOC file, this option automatically places the "@helpfilename.hlp" inside the CNT file on every page.
5 Click OK.
6 Save the external CNT file.
7 Recompile the Help project
I went to the main index project which contains the external cnt file and tried to select the contents tab (no such tab in the project settings). Then I went to the actual project, and again, selected Project Settings there is no Contents Tab. Is there any other way to get that contents tab?
This is how my screen looks like:
eangel

How to call Operating System commands / external programs from within APEX

Hi,
Can someone please suggest how to call Operating Systems commands / external programs from within APEX?
E.g. say I need to run a SQL script on a particular database. SQL script, database name, userid & password everything is available in a table in Oracle. I want to build a utility in APEX where by when I click a button APEX should run the following
c:\oracle\bin\sqlplusw.exe userud/password@database @script_name.sql
Any pointers will be greatly appreciated.
Thanks & Regards,

Hi Guys,
I have reviewed the option of using scheduler and javascript and they do satisfy my requirements PARTIALLY. Any calls to operating system commands through these features will be made on the server where APEX is installed.
However, here what I am looking at is to call operating systems programs on client machine. For example in my APEX application I have constructed the following strings of commands that needs to be run to execute a change request.
sqlplusw.exe user/password@database @script1.sql
sqlplusw.exe user/password@database @script2.sql
sqlplusw.exe user/password@database @script3.sql
sqlplusw.exe user/password@database @script4.sql
What I want is to have a button/link on the APEX screen along with these lines so that when I click that link/button this entire line of command gets executed in the same way it would get executed if I copy and paste this command in the command window of windows.
Believe me, if I am able to achieve what I intend to do, it is going to save a lot of our DBAs time and effort.
Any help will be greatly appreciated.
Thanks & Regards,

External hierarchy from R/3 table

Similar Messages

Maybe you are looking for