External Server Configuration

We have an internal Crystal Enterprise 10 server that we can connect to using Crystal Reports 10 .NET on just about any old internal server we try (all Server 2003). The second we remove the web server from the domain and move that server outside the firewall (even though we have confirmed the firewall is wide open between the CE server and the web server), we start having issues.
Sitting with a network admin watching the traffic, we logged into a crystal interface on the web server. Network admin saw the servers talking to each other. The login request went out from the web server and was received by the CE server, the CE server returned a list of reports we could run, and the web server displayed the list in the interface for us.
Then, we chose a report and clicked "load report". Silence. The web server didn't even attempt to ask the CE server for the report.
As I said, the exact same installation works fine on every internal server on the domain that we try it on. Every time we try to take it off the domain and put it outside, this oddball thing starts happening.
There has got to be some configuration issue going on here. I also had an external web farm that was set up years ago (so no one remembers how they did it) with CR10 that was working fine. I wanted to duplicate the problem in this test environment so I took one of the servers in that farm, confirmed CR10 was pulling reports and working fine, then reloaded it with Server 2003 R2 and put the CR10 .NET piece back on it. And BOOM- I sure did duplicate the problem...
Is there some kind of special configuration for external web servers that are not on the domain that we don't know about?

Moving to BOE forums

Similar Messages

ACS Server: External Authentication configuration error

Hi ALL
I have installed the ACS server and configure properly and it works fine.
But whenever i restart the machine, following error message appears on the external database configuration wizard.
External Authentication Configuration Error
ACS has encountered a problem while attempting to process your request. This could be due to one of the following:
An incorrect installation or configuration of the third-party DLLs required to support this External Database
A corrupt ACS configuration
So after i found this error, i just restart all the seven services and every things works fine.
I always encountered the same error message after restarting the machine each time.
Can any body recomend the solution or can help me to resolve the issue.
Thanks

Hi,
Please try the following workaround.
1. Go to Start > Programs > Administrative Tools > Services.
2. Stop the following services in the following order.
CSAuth
CSDbSync
CSLog
CSMon
CSRadius
CSTacacs
CSAdmin
3. After stopping the following services, start them all again in the following order.
CSAdmin
CSAuth
CSDbSync
CSLog
CSMon
CSRadius
CSTacacs
Please let me know if this was able to help.
If the above doesn't help, please reinstall the ACS as the dll files that are being used
by the ACS have been corrupted, before uninstalling and reinstalling, do take a
backup of ACS server database from System Configuration > ACS backup > Backup Now.
Also make sure that the ACS is installed on the default drive.
tnx
somishra

SAP DMS - How to do an external DMS configuration for the existing system ?

Hi All.
Greetings.
Request help and understanding.
Am new to the world of SAP. And request SOME clarity for understanding of DMS.
We are wanting to put an external DMS server and wish to configure for the same.
So that the load on the production SAP R/3 database is reduced.
We are now wanting to test the same on Dev environment.
From SDN Link :
I understand that :
DMS basically has a content server. which stores documents.
That can be accessed through Web, SAP R/3 Gui , SAP Portal.
I have gone thro various links and the following links i have found to be informative and helpful :
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c1/1c31a243c711d1893e0000e8323c4f/frameset.htm
http://wiki.sdn.sap.com/wiki/display/PLM/DMS+Customizing
http://help.sap.com/saphelp_nw70/helpdata/en/59/fba637fcf7dc39e10000009b38f8cf/frameset.htm
However, would like to know the following because am not getting the clarity :
1) Is there any supported platform / compatibility guide for DMS ?
if yes, can someone send me the link?
2) We have oracle 11g as our for SAP R/3 backend.
Windows 2003 server 64 bit system.
When i check the system status on the dev server of sap.
It says. ECC 6.0 Rel 7.00 update 20 (hOpe am reading it correctly)
After much search on the SMP site,
we finally discovered and downloaded the DMS software for unicode and / 64 bit.
Which we saw under the maintenance components separately seen for DMS 7.0
Now for this DMS content server which we would like to make it external for storage of documents -
do we need to have a separate database for this purpose as a repository.
If i run a setup of DMS - will that automatically install any default repository for this or
will it allow me to choose any other repository for the same ?
Can anyone advise on this.
Because this link says content server is based on Instance of MAXDB : http://help.sap.com/saphelp_nw70/helpdata/en/59/fba637fcf7dc39e10000009b38f8cf/frameset.htm
3) I read some thing like this on some of the SDN links :
P40 - Integration of DMS
P62 - R&D Document Manage¬ment and Workflow
P71 - Document management
What are they referring to.
4) We would be accessing these thro web, gui, customised portal.
This content server configuration is a bit confusing.
5) Is SNC configuration required to be done for the separate DMS server setup.
If yes, how to do that ? any configuration link for that please ?
Can anyone advise on the things to do.
Steps to do.
What all are the pre-requisites to check, before we start the set up of DMS.
Can anyone help me understand this whole thing regarding the DMS installation and configuration.
Step-wise.. from the start to end.
Because it gives me a lot of uneasiness without having everything in place before we could say we could start the whole process of configuration / installation.
Many thanks for your help in advance.
Wishing you a happy and relaxed weekend.
Kind regards
Indu

Thanks christoph & pradeep kumar.
did a few more research and atleast have come to understand that.
DMS server installation has content server which works only with MAXDB.
So my understanding is correct.
And what we see as Easy DMS is a client installation.
which probably i would look at at a later stage.
Found this link to be a little more informative :
http://www.sapfans.com/forums/viewtopic.php?f=12&t=330558
I really wish. That life were to be so easy. To call a consultant and finish it off
Wishful thinking
thanks and cheers
indu

Error on External Serrvice Configuration Page NW 20047s SP10

Hi All,
I am working on CAF developement. I was trying to develop an CAF application using External Service. I used SAP ECC 5.0 server to import a RFC functional module. It was successfully imported in NWDS. Also it got successfully deployed on the Server NW2004s SP10. But when i opened external service configuration page -> service registery it gave me a null pointer exception.
To solve the problem, i removed the RFC functional module from NWDS and
re-deployed the same application, but the error is still there.
One solution i got is to undeploy the application from the server. After doing this I was able to get the External service configuration page -> service registery without any error. BUT WHEN I DEPLOY THE SAME APPLICATION REMOVING THE RFC THE ERROR IS COMMING AGAIN.
I think there must be some entry on the server which stores the External services imported on the NW 2004s server.
Please Help. ITS VERY URGENT
thanks in advance,
Regards,
Sheetal

I am not using date in my program. Follwing is my error.
Failed to process request. Please contact your system administrator.
[Hide]
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
   java.lang.NullPointerException
    at com.sap.caf.mp.mmr.adapter.ServiceDefinitionTypeConverter.convertExternalInterface(ServiceDefinitionTypeConverter.java:507)
    at com.sap.caf.mp.mmr.adapter.MMServiceRetrievalAdapter.getExternalInterfaces(MMServiceRetrievalAdapter.java:547)
    at com.sap.caf.mp.mmr.ejb.MMServiceRetrievalAdapterCallerBean.getExternalInterfaces(MMServiceRetrievalAdapterCallerBean.java:158)
    at com.sap.caf.mp.mmr.ejb.MMServiceRetrievalAdapterCallerLocalLocalObjectImpl0_0.getExternalInterfaces(MMServiceRetrievalAdapterCallerLocalLocalObjectImpl0_0.java:477)
    at com.sap.caf.mp.core.data.service.DataServiceBridge.getExternalServices(DataServiceBridge.java:201)
    ... 47 more
See full exception chain for details.
System Environment
Client
Web Dynpro Client Type HTML Client
User agent Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)
Version null
DOM version null
Client Type msie6
Client Type Profile ie6
ActiveX enabled
Cookies enabled
Frames enabled
Java Applets enabled
JavaScript enabled
Tables enabled
VB Script enabled
Server
Web Dynpro Runtime Vendor: SAP, build ID: 7.0010.20061016112122.0000 (release=645_VAL_REL, buildtime=2006-10-21:16:12:34[UTC], changelist=421181, host=pwdfm101), build date: Thu Dec 28 17:06:00 GMT+05:30 2006
J2EE Engine 7.00 patchlevel
Java VM Java HotSpot(TM) Server VM, version:1.4.2_12-b03, vendor: Sun Microsystems Inc.
Operating system Windows 2003, version: 5.2, architecture: x86
Session & Other
Session Locale en_US
Time of Failure Fri Jan 12 09:47:51 GMT+05:30 2007 (Java Time: 1168575471082)
Web Dynpro Code Generation Infos
sap.com/cafUIconfiguration
SapDictionaryGenerationCore 7.0010.20061002105236.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:52:59[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapDictionaryGenerationTemplates 7.0010.20061002105236.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:53:17[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapGenerationFrameworkCore 7.0010.20060719095755.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:40:44[UTC], changelist=411255, host=PWDFM101.wdf.sap.corp)
SapIdeWebDynproCheckLayer 7.0010.20061002110128.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:58:51[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapMetamodelCommon 7.0010.20061002105432.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:41:39[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelCore 7.0010.20061002105432.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:41:32[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelDictionary 7.0010.20060719095619.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:50:36[UTC], changelist=411251, host=PWDFM101.wdf.sap.corp)
SapMetamodelWebDynpro 7.0010.20061002110156.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:55:32[UTC], changelist=419397, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationCTemplates 7.0010.20061016112122.0000 (release=645_VAL_REL, buildtime=2006-10-21:16:19:13[UTC], changelist=421181, host=pwdfm101)
SapWebDynproGenerationCore 7.0010.20061002110128.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:59:00[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationTemplates 7.0010.20061016112122.0000 (release=645_VAL_REL, buildtime=2006-10-21:16:19:13[UTC], changelist=421181, host=pwdfm101)
sap.com/tcwddispwda
No information available null
sap.com/tcwdcorecomp
No information available null
Detailed Error Information
Detailed Exception Chain
java.lang.RuntimeException: com.sap.caf.rt.exception.CAFBaseRuntimeException: Exception in method getExternalInterfaces.
     at com.sap.caf.wd.services.registry.VwOverview.loadServices(VwOverview.java:661)
     at com.sap.caf.wd.services.registry.VwOverview.wdDoInit(VwOverview.java:133)
     at com.sap.caf.wd.services.registry.wdp.InternalVwOverview.wdDoInit(InternalVwOverview.java:275)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:445)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
     at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:43)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.makeVisible(ViewManager.java:789)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.performNavigation(ViewManager.java:296)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.navigate(ClientApplication.java:767)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.navigate(ClientComponent.java:873)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doNavigation(WindowPhaseModel.java:498)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:144)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:752)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:705)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:261)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:154)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.caf.rt.exception.CAFBaseRuntimeException: Exception in method getExternalInterfaces.
     at com.sap.caf.mp.core.data.service.DataServiceBridge.getExternalServices(DataServiceBridge.java:208)
     at com.sap.caf.wd.services.registry.VwOverview.loadServices(VwOverview.java:657)
     ... 46 more
Caused by: com.sap.engine.services.ejb.exceptions.BaseEJBException: Exception in method getExternalInterfaces.
     at com.sap.caf.mp.mmr.ejb.MMServiceRetrievalAdapterCallerLocalLocalObjectImpl0_0.getExternalInterfaces(MMServiceRetrievalAdapterCallerLocalLocalObjectImpl0_0.java:493)
     at com.sap.caf.mp.core.data.service.DataServiceBridge.getExternalServices(DataServiceBridge.java:201)
     ... 47 more
Caused by: java.lang.NullPointerException
     at com.sap.caf.mp.mmr.adapter.ServiceDefinitionTypeConverter.convertExternalInterface(ServiceDefinitionTypeConverter.java:507)
     at com.sap.caf.mp.mmr.adapter.MMServiceRetrievalAdapter.getExternalInterfaces(MMServiceRetrievalAdapter.java:547)
     at com.sap.caf.mp.mmr.ejb.MMServiceRetrievalAdapterCallerBean.getExternalInterfaces(MMServiceRetrievalAdapterCallerBean.java:158)
     at com.sap.caf.mp.mmr.ejb.MMServiceRetrievalAdapterCallerLocalLocalObjectImpl0_0.getExternalInterfaces(MMServiceRetrievalAdapterCallerLocalLocalObjectImpl0_0.java:477)
     ... 48 more
Thanks and regards,
sheetal

How to connect to external server using router from VLAN's

Hi, I am newbie. I am trying to build network system in Packet Tracer.
Now I have such network layout.
I have different VLAN's Accounting and Sales. I have configured this using subinterface in router to allow computers from different vlan's communicate with each other. Everything works.
Let's assume that there are next subnets and VLAN's. Acct. VLAN (2) (ip's 172.168.0.1-172.168.0.254/24) and Sales VLAN (4) (ip's 172.168.1.1-172.168.1.254/24).
But I need to connect all this computers to the external server. That has ip , for instance 192.168.20.13/24. Like this.
I don't know hot to correctly configure router to make it possible for computers to connect to this server. I have connected switch to the another router interface. And than connected server to the switch and specified ip 192.168.20.13/24. Than I tried to set ip to the router interface from the same subnet like 192.168.20.22/24. So now router can communicate with server.
But how to allow computers to communicate with the server. Please help. I am newbie.
I would be grateful for any help.

Hi Androgen,
One question for you..How does the sales VLAN computers communicate with the accounting VLAN machines? It's through the inter-VLAN routing that you have already setup.
Communicating to the external server is also similar to this.
The computer's in the VLAN should be configured with the default gateway IP which is the the L3 sub-interface IP for that subnet.
Also, the external server needs to have a default gateway to communicate with other remote subnet. The default gateway of that server would be 192.168.20.22 which is the L3 interface for your external subnet.
CF

Weblogic Admin server - Configuration/Server Start/Arguments ignored?

Hi,
I'm trying to specify a http proxy for a WebLogic Admin Server in order for an application to access external resources. I've placed the settings into the "Server Configuration / Server Start / Arguments", and verified that they have been saved into the config/config.xml file for that domain:
<server-start>
<arguments>-Dhttp.proxyHost=[XXXX] -Dhttp.proxyPort=8080</arguments>
<password-encrypted>[XXXX]</password-encrypted>
</server-start>
However, no matter how I start the server, these settings are ignored despite that the documentation states these should be added to the java command line.
starting weblogic with Java version:
java version "1.6.0_19"
Java(TM) SE Runtime Environment (build 1.6.0_19-b04)
Java HotSpot(TM) 64-Bit Server VM (build 16.2-b04, mixed mode)
Starting WLS with line:
C:\PROGRA~1\Java\JDK16~1.0_1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=256m -Dweblogic.Name=AdminServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1032\profiles\default\sysext_manifest_classpath weblogic.Server
As a test I created a new managed server in the same domain, specifying the same startup properties, and they were picked up during startup.
If I manually place the settings into the bin/setDomainEnv.cmd batch file for the domain they are also picked up and work.
Is there an undocumented restriction on Admin Servers that they ignore the "Server Start / Arguments" setting, or is there something else I can check as to why this is not working?
Many thanks,
- Micha.

Umm... I already pasted the relevant snippet out of the config.xml, but following is the entire file. The startup arguments, as specified in the admin console, are:
-Dhttp.proxyHost=[XXXXXXXX] -Dhttp.proxyPort=8080
which matches what is saved in the config.xml.
<?xml version='1.0' encoding='UTF-8'?>
<domain xmlns="http://xmlns.oracle.com/weblogic/domain" xmlns:sec="http://xmlns.oracle.com/weblogic/security" xmlns:wls="http://xmlns.oracle.com/weblogic/security/wls" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://xmlns.oracle.com/weblogic/security/xacml http://xmlns.oracle.com/weblogic/security/xacml/1.0/xacml.xsd http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator/1.0/passwordvalidator.xsd http://xmlns.oracle.com/weblogic/domain http://xmlns.oracle.com/weblogic/1.0/domain.xsd http://xmlns.oracle.com/weblogic/security http://xmlns.oracle.com/weblogic/1.0/security.xsd http://xmlns.oracle.com/weblogic/security/wls http://xmlns.oracle.com/weblogic/security/wls/1.0/wls.xsd">
<name>wls_starter</name>
<domain-version>10.3.2.0</domain-version>
<security-configuration>
<name>wls_starter</name>
<realm>
<sec:authentication-provider xsi:type="wls:default-authenticatorType"></sec:authentication-provider>
<sec:authentication-provider xsi:type="wls:default-identity-asserterType">
<sec:active-type>AuthenticatedUser</sec:active-type>
</sec:authentication-provider>
<sec:role-mapper xmlns:xac="http://xmlns.oracle.com/weblogic/security/xacml" xsi:type="xac:xacml-role-mapperType"></sec:role-mapper>
<sec:authorizer xmlns:xac="http://xmlns.oracle.com/weblogic/security/xacml" xsi:type="xac:xacml-authorizerType"></sec:authorizer>
<sec:adjudicator xsi:type="wls:default-adjudicatorType"></sec:adjudicator>
<sec:credential-mapper xsi:type="wls:default-credential-mapperType"></sec:credential-mapper>
<sec:cert-path-provider xsi:type="wls:web-logic-cert-path-providerType"></sec:cert-path-provider>
<sec:cert-path-builder>WebLogicCertPathProvider</sec:cert-path-builder>
<sec:name>myrealm</sec:name>
<sec:password-validator xmlns:pas="http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator" xsi:type="pas:system-password-validatorType">
<sec:name>SystemPasswordValidator</sec:name>
<pas:min-password-length>8</pas:min-password-length>
<pas:min-numeric-or-special-characters>1</pas:min-numeric-or-special-characters>
</sec:password-validator>
</realm>
<default-realm>myrealm</default-realm>
<credential-encrypted>[XXXXXXXXXX]</credential-encrypted>
<node-manager-username>weblogic</node-manager-username>
<node-manager-password-encrypted>[XXXXXXXX]</node-manager-password-encrypted>
</security-configuration>
<server>
<name>AdminServer</name>
<max-http-message-size>-1</max-http-message-size>
<ssl>
<enabled>false</enabled>
</ssl>
<log>
<file-name>logs/AdminServer.log</file-name>
<rotation-type>bySize</rotation-type>
<number-of-files-limited>true</number-of-files-limited>
<file-count>7</file-count>
<file-min-size>500</file-min-size>
<rotate-log-on-startup>true</rotate-log-on-startup>
<logger-severity>Trace</logger-severity>
<logger-severity-properties></logger-severity-properties>
<log-file-severity>Info</log-file-severity>
<stdout-severity>Info</stdout-severity>
<domain-log-broadcast-severity>Notice</domain-log-broadcast-severity>
<memory-buffer-severity>Debug</memory-buffer-severity>
<log4j-logging-enabled>false</log4j-logging-enabled>
<redirect-stdout-to-server-log-enabled>false</redirect-stdout-to-server-log-enabled>
<domain-log-broadcaster-buffer-size>1</domain-log-broadcaster-buffer-size>
</log>
<machine>[XXXXXXXXXX]</machine>
<listen-port>8080</listen-port>
<listen-port-enabled>true</listen-port-enabled>
<web-server>
<frontend-http-port>0</frontend-http-port>
<frontend-https-port>0</frontend-https-port>
<keep-alive-enabled>true</keep-alive-enabled>
<keep-alive-secs>30</keep-alive-secs>
<https-keep-alive-secs>60</https-keep-alive-secs>
<post-timeout-secs>30</post-timeout-secs>
<max-post-size>-1</max-post-size>
<send-server-header-enabled>false</send-server-header-enabled>
<wap-enabled>false</wap-enabled>
<accept-context-path-in-get-real-path>false</accept-context-path-in-get-real-path>
</web-server>
<listen-address></listen-address>
<java-compiler>javac</java-compiler>
<tunneling-enabled>false</tunneling-enabled>
<tunneling-client-ping-secs>45</tunneling-client-ping-secs>
<tunneling-client-timeout-secs>40</tunneling-client-timeout-secs>
<server-start>
<arguments>-Dhttp.proxyHost=[XXXXXXXX] -Dhttp.proxyPort=8080</arguments>
<password-encrypted>[XXXXXXX]</password-encrypted>
</server-start>
<server-life-cycle-timeout-val>30</server-life-cycle-timeout-val>
<startup-timeout>0</startup-timeout>
<graceful-shutdown-timeout>30</graceful-shutdown-timeout>
<ignore-sessions-during-shutdown>false</ignore-sessions-during-shutdown>
<client-cert-proxy-enabled>false</client-cert-proxy-enabled>
</server>
<embedded-ldap>
<name>wls_starter</name>
<credential-encrypted>[XXXXXXXXXX]</credential-encrypted>
</embedded-ldap>
<configuration-version>10.3.2.0</configuration-version>
<app-deployment>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<module-type>ear</module-type>
<source-path>[XXXXXXXXXX]</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<app-deployment>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<module-type>ear</module-type>
<source-path>[XXXXXXXXXX]</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<app-deployment>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<module-type>ear</module-type>
<source-path>[XXXXXXXXXX]</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<app-deployment>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<module-type>ear</module-type>
<source-path>[XXXXXXXXXX]</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<machine>
<name>[XXXXXXXXXX]</name>
</machine>
<jms-server>
<name>WseeJmsServer</name>
<target>AdminServer</target>
<persistent-store>WseeFileStore</persistent-store>
</jms-server>
<jms-server>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<persistent-store>WseeFileStore</persistent-store>
</jms-server>
<self-tuning>
<work-manager>
<name>weblogic.wsee.mdb.DispatchPolicy</name>
<target>AdminServer</target>
</work-manager>
</self-tuning>
<file-store>
<name>WseeFileStore</name>
<directory>WseeFileStore</directory>
<target>AdminServer</target>
</file-store>
<jms-system-resource>
<name>WseeJmsModule</name>
<target>AdminServer</target>
<sub-deployment>
<name>BEA_JMS_MODULE_SUBDEPLOYMENT_WSEEJMSServer</name>
<target>WseeJmsServer</target>
</sub-deployment>
<descriptor-file-name>jms/wseejmsmodule-jms.xml</descriptor-file-name>
</jms-system-resource>
<jms-system-resource>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<sub-deployment>
<name>[XXXXXXXXXX]</name>
<target>[XXXXXXXXXX]</target>
</sub-deployment>
<descriptor-file-name>[XXXXXXXXXX]</descriptor-file-name>
</jms-system-resource>
<admin-server-name>AdminServer</admin-server-name>
<jdbc-system-resource>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<descriptor-file-name>[XXXXXXXXXX]</descriptor-file-name>
</jdbc-system-resource>
<saf-agent>
<name>ReliableWseeSAFAgent</name>
<target>AdminServer</target>
<store>WseeFileStore</store>
</saf-agent>
</domain>

Publishing my flex application in external server (Channel.Security.Error error Error #2048)

when i publish my flex application in an external server i get that error if my flash builder beta 2 is closed in my system , i did configure an endpoint to the dataservice to point to the external server and if i run my flash builder and any body browser the site it open and they can access the data from my application but if i close my flash builder we have this error all of us
Send failed
Channel.Security.Error error Error #2048: Security sandbox violation:
http://www.dcecrak.com/Maine.swf cannot load data from
http://localhost:37813/flex2gateway/?hostport=www.dcecrak.com&https=N&id=-1. url:
'http://www.dcecrak.com/flex2gateway/'
i created a crossdomain.xml file and put it in the web root , if i try to open the link http://www.dcecrak.com/flex2gateway it open with blank page this means that every thing is oky , my service-config file looks like that :
<?xml version="1.0" encoding="UTF-8"?>
<services-config>
    <services>
        <service-include file-path="remoting-config.xml" />
        <service-include file-path="proxy-config.xml" />
        <service-include file-path="messaging-config.xml" />
    </services>
    <security>
        <login-command class="flex.messaging.security.JRunLoginCommand" server="JRun"/>
        
        
    </security>
    <channels>
        
<channel-definition id="dcecrak" class="mx.messaging.channels.AMFChannel">
            <endpoint uri="http://www.dcecrak.com/flex2gateway/" class="coldfusion.flash.messaging.CFAMFEndPoint"/>
            <properties>
                  <add-no-cache-headers>false</add-no-cache-headers>
                        <polling-interval-seconds>8</polling-interval-seconds>
                        <serialization>
                              <enable-small-messages>false</enable-small-messages>
                        </serialization>
                        <coldfusion>
                            
                              <access>
                                    
                                    <use-mappings>true</use-mappings>
                                    
                                    <method-access-level>remote</method-access-level>
                              </access>
                              
                              <use-accessors>true</use-accessors>
                              
                              <use-structs>false</use-structs>
                    <property-case>
                        
                        <force-cfc-lowercase>false</force-cfc-lowercase>
                        
                        <force-query-lowercase>false</force-query-lowercase>
                        
                        <force-struct-lowercase>false</force-struct-lowercase>
                    </property-case>
                        </coldfusion>
            </properties>
        </channel-definition>
        <channel-definition id="cf-polling-amf" class="mx.messaging.channels.AMFChannel">
            <endpoint uri="http://{server.name}:{server.port}{context.root}/flex2gateway/cfamfpolling" class="coldfusion.flash.messaging.CFAMFEndPoint"/>
            <properties>
                <polling-enabled>true</polling-enabled>
                <polling-interval-seconds>8</polling-interval-seconds>
                        <serialization>
                              <enable-small-messages>false</enable-small-messages>
                        </serialization>
                        <coldfusion>
                            
                              <access>
                                    
                                    <use-mappings>true</use-mappings>
                                    
                                    <method-access-level>remote</method-access-level>
                              </access>
                              
                              <use-accessors>true</use-accessors>
                              
                              <use-structs>false</use-structs>
                    <property-case>
                        
                        <force-cfc-lowercase>false</force-cfc-lowercase>
                        
                        <force-query-lowercase>false</force-query-lowercase>
                        
                        <force-struct-lowercase>false</force-struct-lowercase>
                    </property-case>
                        </coldfusion>
            </properties>
        </channel-definition>
        <channel-definition id="my-cfamf-secure" class="mx.messaging.channels.SecureAMFChannel">
            <endpoint uri="https://{server.name}:{server.port}{context.root}/flex2gateway/cfamfsecure" class="coldfusion.flash.messaging.SecureCFAMFEndPoint"/>
            <properties>
                <polling-enabled>false</polling-enabled>
                        <add-no-cache-headers>false</add-no-cache-headers>
                        <serialization>
                              <enable-small-messages>false</enable-small-messages>
                        </serialization>
                        <coldfusion>
                            
                              <access>
                                    
                                    <use-mappings>true</use-mappings>
                                    
                                    <method-access-level>remote</method-access-level>
                              </access>
                              
                              <use-accessors>true</use-accessors>
                              
                              <use-structs>false</use-structs>
                              <property-case>
                        
                        <force-cfc-lowercase>false</force-cfc-lowercase>
                        
                        <force-query-lowercase>false</force-query-lowercase>
                        
                        <force-struct-lowercase>false</force-struct-lowercase>
                    </property-case>
                        </coldfusion>
            </properties>
        </channel-definition>
        
        <channel-definition id="java-amf" class="mx.messaging.channels.AMFChannel">
            <endpoint uri="http://{server.name}:{server.port}{context.root}/flex2gateway/amf" class="flex.messaging.endpoints.AMFEndpoint"/>
        </channel-definition>
        <channel-definition id="java-secure-amf" class="mx.messaging.channels.SecureAMFChannel">
            <endpoint uri="https://{server.name}:{server.port}{context.root}/flex2gateway/amfsecure" class="flex.messaging.endpoints.SecureAMFEndpoint"/>
        </channel-definition>
        <channel-definition id="java-polling-amf" class="mx.messaging.channels.AMFChannel">
            <endpoint uri="http://{server.name}:{server.port}{context.root}/flex2gateway/amfpolling" class="flex.messaging.endpoints.AMFEndpoint"/>
            <properties>
                <polling-enabled>true</polling-enabled>
                <polling-interval-seconds>8</polling-interval-seconds>
            </properties>
        </channel-definition>
        
    </channels>
    <logging>
        <target class="flex.messaging.log.ConsoleTarget" level="Error">
            <properties>
                <prefix>[BlazeDS] </prefix>
                <includeDate>false</includeDate>
                <includeTime>false</includeTime>
                <includeLevel>false</includeLevel>
                <includeCategory>false</includeCategory>
            </properties>
            <filters>
                <pattern>Endpoint.*</pattern>
                <pattern>Service.*</pattern>
                <pattern>Configuration</pattern>
                <pattern>Message.*</pattern>
            </filters>
        </target>
    </logging>
    <system>
        <manageable>false</manageable>
        
    </system>
</services-config>
and my crossdomain.xml looks like that :
<cross-domain-policy>
<site-control permitted-cross-domain-policies="all"/>
<allow-access-from domain="localhost" to-ports="*" secure="false"/>
<allow-access-from domain="*" to-ports="*" secure="false"/>
<allow-http-request-headers-from domain="*"/>
</cross-domain-policy>
really its strange only the site works if my flash builder is running , please help

Thanks all for your attention, i have solved my problem and i think its a bug in the flash builder , the problem was that when you compile the application and you enabling Network Monitoring , the communication of the AMF channels done throw the http://localhost:37813/flex2gateway/
and that was the problem if you close the flash builder on your system that getaway dose not exist and on the hosted server there is no such address localhost by this port also so the client application witch is catch in you system try to access your localhost and that cause a security error and the address is also not exist .
so the solution or we have to compile the project after we disable the Network Monitoring in flash builder .

SQL Server Configuration Manager – Cannot connect to WMI provider – Invalid class [0x80041010]

look at this post am getting the same
http://social.msdn.microsoft.com/Forums/en-US/sqlkjmanageability/thread/4c8ca86c-105f-4f0a-ac18-6e33dda2bc46
but when I tried the solution given there , It is not working
the error I am getting is mofcomp is not recognized as internal or external command
I tried in C:\program files\Microsoft sql server\90\shared and in Windows\system32
I am getting the same error

Hi sql393,
Cannot connect to WMI provider. You do not have permission or the server is unreachable. Note that you can only manage SQL Server 2005 servers with SQL Server Configuration Manager. Invalid class [0x80041010].
The solution is to go to a command prompt and then run mofcomp.
C:\Program Files\Microsoft SQL Server\90\Shared>mofcomp "C:\Program Files\Microsoft SQL Server\90\Shared\sqlmgmproviderxpsp2up.mof"
For more information, please refer to
http://blogs.msdn.com/b/echarran/archive/2006/01/03/509061.aspx
http://msmvps.com/blogs/martinpoon/archive/2009/11/27/sql-server-configuration-manager-cannot-connect-to-wmi-provider-invalid-class-0x80041010.aspx.
Thanks,
Maggie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. This can be beneficial to other community members reading the thread.

Use case of FQDN parameter in CPPM -- Administration -- Server Configuration

Q: What is the difference between 'FQDN' & 'Hostname' parameter available in the ClearPass Server configuration?
A: The FQDN parameter is primarily used for SSO functionality with any external IDP servers. We can configure the VIP hostname of a ClearPass cluster to be the FQDN.
'Hostname' parameter in the Administration --> Server Configuration, does not need to be an FQDN. We can specify any user defined names. If we need to join the ClearPass cluster members to the same Active directory domain, then hostname should be different. Otherwise, it will create duplicate computer/machine accounts for ClearPass Server in the Domain Controller and may lead to PEAP-EAP-MSCHAPv2 authentication issues/failures for the clients against Active Directory.

You could use regular expressions to try to strip the "+" from your form variables but wouldn't it be easier to just have the select field display +5 and then just pass "5" and not use the plus character in your database or in your passed variables? Special characters in your passed variables is always a potential headache.
Lawrence *Adobe Community Expert*
www.Cartweaver.com
Complete Shopping Cart Application for
Dreamweaver, available in ASP, PHP and CF
www.twitter.com/LawrenceCramer

I am getting "The contents cannot be displayed in a frame" error when tried to acces an external URL configured through launchpad(ESS). How to rectify it?

Hi Guys,
We have configured ESS role through launchpad. For viewing payslips we are using an external URL configured through launchpad.
But when we try to access the configured link in ESS role, it displays "The contents cannot be displayed in a frame" .
Should I need to change some parameters/settings in Launchpad so that I could overcome this issue.
Guidance required,
Regards,
Ajeeth Kumar S

Hi Shankar Reddy Chamala,
Thanks for the alternate solution.
But the solution you have provided also ended up with the same error
"The content cannot be displayed in a frame" error.
Some additional information so that you could help me out,
The following is the test report .
HTTP/1.1 200 OK
Server: TIN-AppServer
Strict-Transport-Security: max-age=15552000
Cache-Control: no-cache, no-store, must-revalidate
Pragma: no-cache
Expires: Thu, 01 Jan 1970 00:00:00 GMT
x-frame-options: DENY
Content-Type: text/html; charset=UTF-8
Content-Encoding: gzip
Content-Length: 2421
Date: Thu, 15 May 2014 14:23:14 GMT
Connection: keep-alive
Vary: Accept-Encoding
The tester has mentioned the yellow highlighted property may be a cause for this issue.
I googled that the highlighted property is set by the website owners for security reasons.
Shankar I have another doubt..
Is it feasible to create an HTML document to open the external link and link the HTML document to the iview and then configure the custom iview with launchpad.?
-->If yes can you please elaborate the steps for it.
Thanks and Regards,
Ajeeth Kumar S

Migrating one email domain to external server

our AD domain "domain1.com" users have @domain1.com, @domain2.com, and @domain3.com (this one is for testing usage) mailboxes/addresses on our internal Exchange 2010 14.01.0438.000 server. All users are on the same domain regardless
of the email address they use. mailboxes with @domain1.com as their primary smtp address are being migrated to an email service outside of our organization/domain but will still remain users on our domain. For those users we'll be creating a new
profile in Outlook pointed at that new external mail server to switch over to on the cutover date while leaving the existing profile as is. Following migration for a period of time we want @domain1.com users to still be able revert to their current
Outlook profile and be able to get to our OWA in case any problems/inconsistencies occurred migrating contents to the new service. It's understood that sending/receiving mail would no longer work for them on the internal Exchange server, the point is just
that they could access the old contacts/calendar/notes/tasks/emails.
My testing with migrating @domain3.com indicated that in order for domain2.com senders to be able to send mail to @domain1.com recipients after the cutover date and have the mail arrive at the external server instead of the internal server, the following
would have to be done:
-domain1.com removed from gatewayproxy attribute in recipient polices -
removal of gatewayProxy via ADSI
-domain1.com removed from exchange >> organization configuration >> hub transport >> accepted domains
-mx record pointing at external mail server added to internal dns server domain1.com zone
-domain1.com removed from smtp proxyAddresses attribute on each mailbox
It seems like there should be a way to achieve the result of getting the mail to the external server without modifying the proxyAddresses attributes so that the users could still get back into the old exchange server after cutover with their original address.
any ideas?
Thanks

the steps to get [email protected] to [email protected] mail sent to external server are clear from testing and additional testing shows some option for still getting into the old mailboxes from clients/owa but not clear is how it could be done while leaving
domain1.com mailbox addresses intact on the old Exchange server and the AD user object 'mail' attribute intact as it was pre-cutover. To expand and rephrase my original post, is there a way to make Exchange determine whether it should route domain1.com
mail internally vs externally via a global setting that would take priority over and cause to be ignored smtp proxyAddresses attributes on individual mailboxes so these don't have to be stripped/modified causing unwanted AD attribute alteration?
objective partially achieved -
AD object for [email protected] mailbox has the following attributes -
proxyAddresses = SMTP:[email protected] (Exchange primary reply-to address) & smtp:[email protected]
'mail' attribute = [email protected]
if we change primary/reply SMTP in exchange to [email protected] and remove SMTP:[email protected], the result of internal mail sent to [email protected] going to the external server is accomplished but the 'mail' attribute in AD then changes to [email protected]
which is unwanted. we still want 'mail' attribute left as is for these users since their email addresses are not changing. access to mailbox contents on old exchange server via old [email protected]'s old outlook profile + OWA still work which
is good though.
also found that adding a domain to organization configuration >> hub transport >> accepted domains as 'external relay' in addition to a send connector for the domain pointed at the MX for the external server still isn't enough to override/ignore
any proxyaddresses on the internal mailboxes. mail willl still end up at the internal mailbox.

SAP Content Server Configuration multiple repositories

Dear Gurus,
We have a content server configured with SAP CRM.
Recently we faced issue with large size of generic object created by user monthly in SAP R/3 (SOFFCONT1 growth ) thus we are considering to use content server for generic object storage.
Could you please advice?
1. As far as I know , I can have multiple repositories in content server thus can have my R/3 and CRM repositories in same content server , Please correct me , Any importent aspect which should be consider while doing such( except growth recalculation and user load for additional R/3 system).
2. We are running SAP R/3 from past few years and we have a huge number of generic objects in R/3 database.
Is it possible to migrate existing generic object to content server?
Thank you
Regards
Ahmed
Regards
Arif Ahmed Qureshi
SAP Basis Consultant

Check
Note 782614 - Using external Content Server in the BDS
Note 389366 - Relocation of documents
Note 530792 - Storing documents in the generic object services
Markus

DNS server configuration and behaivour

Hi all,
I'm looking for detail explanations which can explain how Mac OS X 10.6 *DNS client* works and may be configured.
According to http://discussions.apple.com/thread.jspa?threadID=2227251 nothing is not guaranteed like order and failover.
According to http://support.apple.com/kb/HT4030 failover will take affect when DNS server returns with SERV_FAIL (0x2) error code. What about NXDOMAIN (0x3) error code (which is more interesting scenario)?
What I'm looking for DNS client?
I'm looking for several DNS servers configuration which allow to split DNS domains for several areas. This, for example, may be very useful for VPN connections when VPN DNS server will resolve internal resource and another server (configured before VPN tunnel established) will resolve external resources.
Is there any possible configuration to achieve this requirement for Mac OS?
Thanks in advance,
Oleg.

Thanks Felix for quick response.
In your scenario:
1. You configured to different DNS servers and probably only one of them replied to DNS queries. And this is OK.
2. When non valid IP configured means that DNS server will not reply to DNS query and than failover will query the second DNS server in the list. And this is also OK.
I'm looking 2 different DNS servers configuration when one of them will reply to different domains. For example:
First server will reply to *.mycompany.com.
The second one will reply to any query except mycompany.com domain(since it is not published).
Thanks again,
Oleg.

Lion server configuration blocked...

Hello ! My lion server configuration is blocked...my computer seems not to work ....
I can not stop the configuration because the software tells me that he is still configuring....
I'm afraid that if i force closing the configuration application the installation would be corrupted....
any idea ?

OK, I'm considering one other configuration for our workgroup server:
MacMini Server running Mountain Lion Server with two 750GB internal drives. These will both be data drives and set up as RAID mirror.
For the system drive I would boot from a small (64GB or 128GB) external Thunderbolt drive. It would act as a dedicated OS drive.
Other than a little bit more storage room, would that give me any advantage over having both my OS and Data on the internal RAID? I've heard that having your OS isolated can be beneficial for some reason.
(The RAID and the OS volume would be backed up nightly with weekly rotational offsite backup as well).
I think I've decided against SSD drives for the reason that woodmeister50 pointed out above (the network being more of a bottleneck than the drives). However, if there is some advantage to the external OS drive being SSD, Elgato has a nice thunderbolt solution for reasonable money.
Feedback appreciated!

VPN server configuration - dns troubles

Some variants of this issue have popped up on this forum, but could not quite resolve my issue. I have VPN running on OSX 10.6 server, but when the client connects to the server, they cannot browse the Internet by their host-name. However, they are able to browse the web by entering IP addresses. On the server side, DNS servers are configured to be 8.8.8.8, and network routing definition set to 192.168.1.0 / 255.255.255.0. L2TP IP range is 192.168.1.2 - 10. Any suggestions?
Thanks!

Many parts of Mac OS X Server require functional DNS services.
When you are operating behind NAT, no external DNS provider can typically provide you with DNS translations.
Neither your ISP nor Google can provide you with DNS translations within private IP blocks. Only local DNS can do that.
The other matter here is the attempt to operate Mac OS X Server as a gateway. That gets gnarly, and there are many discussions of that posted around the forums. It's far easier to use an external gateway box, and to avoid configuring a Mac as an expensive and awkward and ungainly and insecure IP router; to avoid the potential to expose open ports or random server applications to the wilds of the internet, as well as avoiding the routing configuration difficulties inherent in the default Mac OS X and Mac OS X Server user interfaces.
Irrespective of all that DNS configuration and LAN-local stuff, your VPN needs to have a DNS server from the target LAN or it will have no translations for a NAT'd network. By default, most VPNs will use the provided DNS for NAT'd hosts as well as public hosts. Which you don't have.
The usual Mac OS X Server configuration order is the host software, basic IP networking and LAN routing, DNS services, Open Directory (OD), and only then with the rest of everything else.
If that sudo changeip -checkhostname command is tossing a DNS warning, then you have DNS issues on the LAN. Need help setting up LAN-local DNS on Mac OS X Server? Here are detailed DNS set-up instructions.

External Server Configuration

Similar Messages

Maybe you are looking for