How to connect to external server using router from VLAN's
Hi, I am newbie. I am trying to build network system in Packet Tracer.
Now I have such network layout.
I have different VLAN's Accounting and Sales. I have configured this using subinterface in router to allow computers from different vlan's communicate with each other. Everything works.
Let's assume that there are next subnets and VLAN's. Acct. VLAN (2) (ip's 172.168.0.1-172.168.0.254/24) and Sales VLAN (4) (ip's 172.168.1.1-172.168.1.254/24).
But I need to connect all this computers to the external server. That has ip , for instance 192.168.20.13/24. Like this.
I don't know hot to correctly configure router to make it possible for computers to connect to this server. I have connected switch to the another router interface. And than connected server to the switch and specified ip 192.168.20.13/24. Than I tried to set ip to the router interface from the same subnet like 192.168.20.22/24. So now router can communicate with server.
But how to allow computers to communicate with the server. Please help. I am newbie.
I would be grateful for any help.
Hi Androgen,
One question for you..How does the sales VLAN computers communicate with the accounting VLAN machines? It's through the inter-VLAN routing that you have already setup.
Communicating to the external server is also similar to this.
The computer's in the VLAN should be configured with the default gateway IP which is the the L3 sub-interface IP for that subnet.
Also, the external server needs to have a default gateway to communicate with other remote subnet. The default gateway of that server would be 192.168.20.22 which is the L3 interface for your external subnet.
CF
Similar Messages
-
How to connect MS sql server using ODI
Hi ,
i am trying to connect MS SQL server database with ODI .
I have copied sqljdbc.jar file in drivers folders .i got this driver from MSDN
While creating data source i have selected com.microsoft.jdbc.sqlserver.SQLServerDriver driver
i am giving connection string as jdbc:microsoft:sqlserver://hostname:1438;databaseName=siebeldb;user=SIEBEL;password=SI
ODI java version :1.5.0_20
i am getting following error :
com.sunopsis.sql.c: com.microsoft.jdbc.sqlserver.SQLServerDriver
at com.sunopsis.sql.SnpsConnection.a(SnpsConnection.java)
at com.sunopsis.sql.SnpsConnection.testConnection(SnpsConnection.java)
at com.sunopsis.sql.SnpsConnection.testConnection(SnpsConnection.java)
at com.sunopsis.graphical.r.or.o(or.java)
at com.sunopsis.graphical.r.or.r(or.java)
at com.sunopsis.graphical.r.or.g(or.java)
at com.sunopsis.graphical.r.or.a(or.java)
at com.sunopsis.graphical.r.or.a(or.java)
at com.sunopsis.graphical.r.il.actionPerformed(il.java)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.Dialog$1.run(Unknown Source)
at java.awt.Dialog$2.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Dialog.show(Unknown Source)
at java.awt.Component.show(Unknown Source)
at java.awt.Component.setVisible(Unknown Source)
at com.sunopsis.graphical.r.or.q(or.java)
at com.sunopsis.graphical.r.or.<init>(or.java)
at com.sunopsis.graphical.frame.a.ji.bx(ji.java)
at com.sunopsis.graphical.frame.bn.w(bn.java)
at com.sunopsis.graphical.frame.bn.d(bn.java)
at com.sunopsis.graphical.frame.w.actionPerformed(w.java)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
any pointers on this will be very usefull.
regards ,
MOhanHI ,
i have copied 1.2 driver in my drivers dir and pointed oDI java home to 1.4.2 JRE .
tried testing connection with above Driver and connection string
now i got below error
java.sql.SQLException: No suitable driver
at java.sql.DriverManager.getDriver(Unknown Source)
at com.sunopsis.sql.SnpsConnection.u(SnpsConnection.java)
at com.sunopsis.sql.SnpsConnection.a(SnpsConnection.java)
at com.sunopsis.sql.SnpsConnection.testConnection(SnpsConnection.java)
at com.sunopsis.sql.SnpsConnection.testConnection(SnpsConnection.java)
at com.sunopsis.graphical.r.or.o(or.java)
at com.sunopsis.graphical.r.or.r(or.java)
at com.sunopsis.graphical.r.or.g(or.java)
at com.sunopsis.graphical.r.or.a(or.java)
at com.sunopsis.graphical.r.or.a(or.java)
at com.sunopsis.graphical.r.il.actionPerformed(il.java)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.Dialog$1.run(Unknown Source)
at java.awt.Dialog.show(Unknown Source)
at java.awt.Component.show(Unknown Source)
at java.awt.Component.setVisible(Unknown Source)
at com.sunopsis.graphical.r.or.q(or.java)
at com.sunopsis.graphical.r.or.<init>(or.java)
at com.sunopsis.graphical.frame.a.ji.bx(ji.java)
at com.sunopsis.graphical.frame.bn.w(bn.java)
at com.sunopsis.graphical.frame.bn.d(bn.java)
at com.sunopsis.graphical.frame.w.actionPerformed(w.java)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source) -
How to connect to remote server with jmx from jvisualvm
I have a WL 10.3.2 domain running on a single box. The adminserver and managed server are running on the same box, on different ports (7001 and 8001, respectively).
I have a Spring application deployed to the managed server and I've configured it to register a Spring bean as a JMX mbean.
When I run this entire configuration on my laptop, I can run jvisualvm and connect to my server and see and manipulate my registered mbean.
I'm having trouble figuring out how to get a remote connection working, however. I want to run jvisualvm on my laptop and connect to the remote server.
I first did "Add Remote Host", where I specified the IP address. It appears that this was created successfully, and it apparently was able to determine the DNS name for it.
I then tried to add a JMX connection. In the "Connection" field, I just entered the IP address followed by a colon and 8001 (managed server port number).
In the "Use security credentials" section, I entered the weblogic admin principal and credentials.
When I click OK, it chugs for a while and eventually gives up, saying:
Cannot connect to [email protected]:8001 using
service:jmx:rmi:///jndi/rmi://nn.nn.nn.nn:8001/jmxrmi
What might I be missing?I've resolved this. At least I was able to configure an authenticated connection. It doesn't use SSL yet, but I'm ok with that for a while.
Resolving this only required changing the command line parameters for the managed server, and being aware of the "jmxremote.access" and jmxremote.password" files. The following blog article helped a lot: [http://www.dzone.com/links/r/monitoring_your_java_application_with_jmx_part_2.html] .
I'm now passing the following command-line parameters:
-Dcom.sun.management.jmxremote -Dcom.sun.management.jmxremote.port=8888 -Dcom.sun.management.jmxremote.ssl=false -Dcom.sun.management.jmxremote.authenticate=true
The default "role" configured in "jmxremote.access" is "controlRole", and the "jmxremote.password" file specifies the credentials for that principal. I simply used that principal and credential in JVisualVM, and the connection succeeded.
And I just used the "host:port" form, not the protocol form.
Edited by: david.karr on Feb 4, 2011 12:47 PM -
How i connect to SQL server using java?
hi every body
i need to connect to a sql server database using java
i do not know sql driver in java
plz help me
thanksThis is certainly the wrong forum for that question. Search in the JDBC forum. This has been asked and answered many times.
-
I am confused as to how to connect my external start botton. I would like it to function like a start button on a front panel of a VI. I would like to use the +5V on pin 14 but I really don't know where to go from here. Any guidence for a novice would be most appreciated.
phod,
This is the LabVIEW Real-Time forum, so I suggest that in the future that you post this type of question to the Multifunction DAQ forum.
For the simplest solution you will have to connect your button to a digital line of your board, consult the sc-2345 user manual for a diagram of where these lines are exposed. You will have to connect your start button in series with a line that is high, such as your 5V pin or another digital line. Then connect this to a digital line that will be your start trigger.
Your program can poll the digital line that is connected to your button in a while loop and when it goes high, it lets the rest of the program execute. For the programming, I suggest you take a look at the shipping examples that come with LabVIEW. If yo
u have LabVIEW 7.0 go to Help>>Find Examples. Open Hardware Input Output>>Traditional DAQ>>Digital Input and Output>>E Series for some examples of digital I/O programming with E-series boards.
Hope that gets you started.
Gerardo -
How do i connect to sql server using java?
hi ever body
i need to connect to sql server using java
what is the driver i will use?
thanksMicrosoft make a jdbc driver and it is readily available through MSDN. Here is a link http://msdn2.microsoft.com/en-us/data/aa937724.aspx. Whatever jdbc driver you are looking for, Google it, and if it exists you'll find it in 10 seconds.
-
Cant do a file get from external server using file sender adapter with ftp
Hi all,
Up until now our company has only used the file sender adapter with ftp protocol to get a file from our XI server for processing and input the file into an integration process
I have a requirement to do an ftp file get from an external server
From our XI development server I can ftp directly to the external server and view the required directory using the command window via a DOS prompt (FTP open ...). So all firewall issues and communications are fine
Unfortunately I cannot currently pull files from the external server using the XI file adapter with ftp protocol from the XI development server AWB017
FTP Connection Parameters: External server name using port 21, Data Connection is Passive, No security, I supply a userid and password
Processing Parameters: Processing Mode is Archive (I tried test but this did not work either)
No messages appear in the RWB
Is there something else that I need to set up in order for the external ftp get to work via the XI file adapter?
Regards,
MikeThanks for your responses.
I have found the error messages in the File Adapter Monitor
Scenario 1
When I prefix the source directory with a forward slash, eg <b>/Folder/Subfolder</b> the error message is as follows
<b>EST: Error: Error connecting to ftp server 'ip address': FTPEx: /Folder/Subfolder: The system cannot find the path specified</b>
Scenario 2
When I DO NOT prefix the source directory with a forward slash, eg <b>Folder/Subfolder</b> a different error message is returned
<b>Error: Retrieving file 'FILENAME.XML' failed unexpectedly: FTPEx: Folder/Subfolder: The system cannot find the path specified</b>
At least in this scenario the adapter has been able to identify the file on the external FTP site but cannot retrieve it
Questions
I thought that the backslash prefix for the source directory was mandatory but I am receiving an error in each scenario
I receive the same error message whether the Processing Mode is 'Archive' or 'Test'
The logs on the external ftp server seem to indicate that I am simply connecting, sending username and password then quiting straight away. I am not issuing any commands that they can see
I thought that being a Sender adapter it would inherently execute a Pull or Get command
To recap, from our XI development server I can ftp directly to the external server and view the required directory using the command window via a DOS prompt (FTP open ...). So all firewall issues, communications, userid and password are fine
Has anyone experienced these issues?
Please advise on next course of action?
Regards,
Mike -
Not able to connect with managed server using ssl connection
Hi Guys,
My weblogic server is running on linux. I have setup ssl connction bu using Demo Identity and Demo Trust.In server logs i can find the following infomation that server is running on secure port.
But once i try connect to managed server using client i m facing below error:
<May 27, 2013 2:55:00 PM IST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<May 27, 2013 2:55:00 PM IST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<May 27, 2013 2:55:00 PM IST> <Info> <Security> <BEA-090908> <Using default WebLogic SSL Hostname Verifier implementation.>
javax.naming.CommunicationException [Root exception is java.net.ConnectException: t3s://host:port: Destination unreachable; nested exception is:
javax.net.ssl.SSLHandshakeException: General SSLEngine problem; No available router to destination]
at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:40)
at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLInitialContextFactoryDelegate.java:767)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:366)
at weblogic.jndi.Environment.getContext(Environment.java:315)
at weblogic.jndi.Environment.getContext(Environment.java:285)
at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:684)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:307)
at javax.naming.InitialContext.init(InitialContext.java:242)
at javax.naming.InitialContext.<init>(InitialContext.java:216)
at com.akt.client.WLCLIENT.makeConnection(WLCLIENT.java:40)
at com.akt.client.WLCLIENT.main(WLCLIENT.java:60)
Caused by: java.net.ConnectException: t3s://host:port: Destination unreachable; nested exception is:
javax.net.ssl.SSLHandshakeException: General SSLEngine problem; No available router to destination
at weblogic.rjvm.RJVMFinder.findOrCreateInternal(RJVMFinder.java:216)
at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:170)
at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:165)
at weblogic.jndi.WLInitialContextFactoryDelegate$1.run(WLInitialContextFactoryDelegate.java:345)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:340)
... 9 more
Caused by: java.rmi.ConnectException: Destination unreachable; nested exception is:
javax.net.ssl.SSLHandshakeException: General SSLEngine problem; No available router to destination
at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:470)
at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:321)
at weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(RJVMManager.java:260)
at weblogic.rjvm.RJVMManager.findOrCreate(RJVMManager.java:197)
at weblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(RJVMFinder.java:238)
at weblogic.rjvm.RJVMFinder.findOrCreateInternal(RJVMFinder.java:200)
... 15 more
But in server logs i can see below message
opt/Oracle/Middleware/wlserver_12.1/server/lib/DemoIdentity.jks.>
<May 27, 2013 2:47:06 PM IST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /opt/Oracle/Middleware/wlserver_12.1/server/lib/DemoTrust.jks.>
<May 27, 2013 2:47:06 PM IST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /opt/jdk1.7.0_21/jre/lib/security/cacerts.>
<May 27, 2013 2:47:06 PM IST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on hostname:port for protocols iiops, t3s, ldaps, https.>
<May 27, 2013 2:47:06 PM IST> <Notice> <WebLogicServer> <BEA-000332> <Started the WebLogic Server Managed Server "Server-Test" for domain "base_domain" running in development mode.>
Please suggest
Edited by: 1008140 on May 27, 2013 2:37 AMWelcome to OTN
This section related to Database question not fusion middle ware Post your question
Oracle Discussion Forums » Fusion Middleware -
Can i connect 2 external hdd using the thunderbolt to ethernet adapter
can i connect 2 external hdd using the thunderbolt to ethernet adapter
thanks its a wd my book world i just want to directly connect to it i dont want to use it as a network hdd anymote and if i do it will i still be able to use wifi to connect to the internet.
it shows up the the bonjour bookmarks when its connected through my router does that mean it will work? -
How to connect MS-sql server with SAP BW
hi all,
i want the connection procedure to how to connect MS-sql server with SAP BW.so that i can extract the data from ms sql server and can create cubes using that data.please help me in this issue.Hi Vamshi,
Go through this DOC it explains u how to connect to other data bases like SQL...
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/58f4db47-0501-0010-a2bf-ff01b150fdff]
this is a thread related to connect the SQL server..
[DB Connect MS SQL Server;
Regards,
NR
Assign points if helpful... -
HT1529 how to connect to internet by using Ethernet Cable
how to connect to internet by using Ethernet Cable
I have apple mac book pro with retina display.plz send me the setting thank uThere's no setting. Plug in the cable to the adapter for either USB or Thunderbolt and plug the other end into your router. You can turn off wireless at that point.
-
Hi, everyone:
I have installed the Oracle9iAS(9.0.2.0.1), at the first time installation, every thing is succeed in Miracle Linux 2.0, but after i reboot linux pc, then
#$ORACLE_HOME/bin/emctl start is also succeed,
unfortunately after i connect to that pc by 1810 port,
it display a web page with the message of
Servlet error: Renderer failed:
java.lang.NoClassDefFoundError can't connect X11 window
server using 'localhost:0.0' as the value of the DISPLAY
variable
why, and how to solve this problem, thanks in advancedCheck out the support matrix for deploying to different versions of OracleAS.
http://otn.oracle.com/products/jdev/htdocs/9.0.5.1/install.html#supported
Following how-to has an FAQ which has details about invalid servlet path error.
http://otn.oracle.com/products/jdev/howtos/appservers/deployias.html#faq
raghu
JDev Team -
Hi there, I am trying to connect to my server at work from home using a vpn connection. It connects fine and the time ticks along, but when i click go - connect to server, it comes up with connection failed. Please help!
... when i click go - connect to server, it comes up with connection failed.
If you're trying to connect to a Bonjour server on the remote network, that won't work over a layer 3 VPN. Use something like Hamachi or one of the SSH-tunnelling Bonjour proxy apps for that. -
How to connect an external monitor to macbook pro. The monitor has no usb connecter, only a port.
Most MacBook Pro models have a Mini DVI port, a Mini DisplayPort or a ThunderBolt port for connecting an external display. USB does not have enough bandwidth to support a responsive display connection.
What model MacBook Pro do you have, by year, CPU speed or MacBook Pro 3.1 designation? -
Cannot Connect to Essbase Server Using MaxL
After installing and configuring planning. I was able to create data source and application. When I shot down and restart the machine. The diagnostics report highlighted these srrors
EPMVAL - 01010 can not connect to Essbase server using MaxL
Network Error - 10061 unable connect to oracle.vision.com:1423. the client timed out waiting to connect Essbase Agent using TCP/IP
Can some help please
chiHi John
This is error from Sharedservices_security_client may it will you to identify the cause of this issue
PMCSS] [ERROR] [EPMCSS-00001] [oracle.EPMCSS.CSS] [tid: 10] [ecid: disabled,0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
[2012-03-04T17:29:20.953+00:00] [EPMCSS] [ERROR] [EPMCSS-00001] [oracle.EPMCSS.CSS] [tid: 10] [ecid: disabled,0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
[2012-03-04T17:29:24.906+00:00] [EPMCSS] [ERROR] [EPMCSS-00001] [oracle.EPMCSS.CSS] [tid: 10] [ecid: disabled,0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
[2012-03-05T05:21:13.515+00:00] [EPMCSS] [ERROR] [EPMCSS-00001] [oracle.EPMCSS.CSS] [tid: 10] [ecid: disabled,0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
[2012-03-05T05:21:19.359+00:00] [EPMCSS] [ERROR] [EPMCSS-00001] [oracle.EPMCSS.CSS] [tid: 10] [ecid: disabled,0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
[2012-03-05T05:21:24.890+00:00] [EPMCSS] [ERROR] [EPMCSS-00001] [oracle.EPMCSS.CSS] [tid: 10] [ecid: disabled,0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
[2012-03-05T10:08:08.812+00:00] [EPMCSS] [ERROR] [EPMCSS-00001] [oracle.EPMCSS.CSS] [tid: 10] [ecid: disabled,0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
[2012-03-05T10:08:14.875+00:00] [EPMCSS] [ERROR] [EPMCSS-00001] [oracle.EPMCSS.CSS] [tid: 10] [ecid: disabled,0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
[2012-03-05T10:08:18.890+00:00] [EPMCSS] [ERROR] [EPMCSS-00001] [oracle.EPMCSS.CSS] [tid: 10] [ecid: disabled,0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
Thanks
Chi
Maybe you are looking for
-
Can I Create A Symbolic Link to folders stored on an SMB Share folder?
Hello, I am very new to Unix and was hoping that someone could point me in the right direction with regards to Symbolic links and an SMB share folder .... Have purchased an ext. LAN Drive enclosure (http://www.macpower.com.tw/products/hdd3/pleiades/p
-
External monitor not receiving signal
In a MacBook Pro with Mountain Lion 10.8.3 when connecting to an external monitor does not appeare to be receiving signal.
-
Does Elements 9 Support New Nikon D7000?
Any News on whether the new Elements 9 software will support the new Nikon D7000?. I see where it does support Nikon's NEF Raw Format but can find nothing about Supporting the Nikon D7000 due to be released to stores the middle of October.
-
Change color of separator line in ActionBar between buttons?
There is a black line that appears after everything inserted into the actionbar, i want it to be a different color, or even be two lines together being different colors.
-
Clipping paths and coloring text
So I'm putting a brochure together in InDesign and I'm trying to create an effect that I believe could be done easily with a clipping mask as I understand them to work in Illustrator. But this is not working like I hoped. The basic idea is that I'm t